-
CVE-2025-37777
•
published on May 1, 2025
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in __smb2_lease_break_noti()
Move tcp_transport free to ksmbd_conn_free. If ksmbd connection is
referenced when ksmbd server thread terminates, It will not be freed,
but conn-tcp_transport is freed. __smb2_lease_break_noti can be performed
asynchronously when the connection is disconnected. __smb2_lease_break_noti
calls ksmbd_conn_write, which can cause use-after-free
when conn->ksmbd_transport is already freed.
-
CVE-2025-37776
•
published on May 1, 2025
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in smb_break_all_levII_oplock()
There is a room in smb_break_all_levII_oplock that can cause racy issues
when unlocking in the middle of the loop. This patch use read lock
to protect whole loop.
-
CVE-2025-37775
•
published on May 1, 2025
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix the warning from __kernel_write_iter
[ 2110.972290] ------------[ cut here ]------------
[ 2110.972301] WARNING: CPU: 3 PID: 735 at fs/read_write.c:599 __kernel_write_iter+0x21b/0x280
This patch doesn't allow writing to directory.
-
CVE-2025-37774
•
published on May 1, 2025
In the Linux kernel, the following vulnerability has been resolved:
slab: ensure slab-obj_exts is clear in a newly allocated slab page
ktest recently reported crashes while running several buffered io tests
with __alloc_tagging_slab_alloc_hook() at the top of the crash call stack.
The signature indicates an invalid address dereference with low bits of
slab->obj_exts being set. The bits were outside of the range used by
page_memcg_data_flags and objext_flags and hence were not masked out
by slab_obj_exts() when obtaining the pointer stored in slab->obj_exts.
The typical crash log looks like this:
00510 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
00510 Mem abort info:
00510 ESR = 0x0000000096000045
00510 EC = 0x25: DABT (current EL), IL = 32 bits
00510 SET = 0, FnV = 0
00510 EA = 0, S1PTW = 0
00510 FSC = 0x05: level 1 translation fault
00510 Data abort info:
00510 ISV = 0, ISS = 0x00000045, ISS2 = 0x00000000
00510 CM = 0, WnR = 1, TnD = 0, TagAccess = 0
00510 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
00510 user pgtable: 4k pages, 39-bit VAs, pgdp=0000000104175000
00510 [0000000000000010] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
00510 Internal error: Oops: 0000000096000045 [#1] SMP
00510 Modules linked in:
00510 CPU: 10 UID: 0 PID: 7692 Comm: cat Not tainted 6.15.0-rc1-ktest-g189e17946605 #19327 NONE
00510 Hardware name: linux,dummy-virt (DT)
00510 pstate: 20001005 (nzCv daif -PAN -UAO -TCO -DIT +SSBS BTYPE=--)
00510 pc : __alloc_tagging_slab_alloc_hook+0xe0/0x190
00510 lr : __kmalloc_noprof+0x150/0x310
00510 sp : ffffff80c87df6c0
00510 x29: ffffff80c87df6c0 x28: 000000000013d1ff x27: 000000000013d200
00510 x26: ffffff80c87df9e0 x25: 0000000000000000 x24: 0000000000000001
00510 x23: ffffffc08041953c x22: 000000000000004c x21: ffffff80c0002180
00510 x20: fffffffec3120840 x19: ffffff80c4821000 x18: 0000000000000000
00510 x17: fffffffec3d02f00 x16: fffffffec3d02e00 x15: fffffffec3d00700
00510 x14: fffffffec3d00600 x13: 0000000000000200 x12: 0000000000000006
00510 x11: ffffffc080bb86c0 x10: 0000000000000000 x9 : ffffffc080201e58
00510 x8 : ffffff80c4821060 x7 : 0000000000000000 x6 : 0000000055555556
00510 x5 : 0000000000000001 x4 : 0000000000000010 x3 : 0000000000000060
00510 x2 : 0000000000000000 x1 : ffffffc080f50cf8 x0 : ffffff80d801d000
00510 Call trace:
00510 __alloc_tagging_slab_alloc_hook+0xe0/0x190 (P)
00510 __kmalloc_noprof+0x150/0x310
00510 __bch2_folio_create+0x5c/0xf8
00510 bch2_folio_create+0x2c/0x40
00510 bch2_readahead+0xc0/0x460
00510 read_pages+0x7c/0x230
00510 page_cache_ra_order+0x244/0x3a8
00510 page_cache_async_ra+0x124/0x170
00510 filemap_readahead.isra.0+0x58/0xa0
00510 filemap_get_pages+0x454/0x7b0
00510 filemap_read+0xdc/0x418
00510 bch2_read_iter+0x100/0x1b0
00510 vfs_read+0x214/0x300
00510 ksys_read+0x6c/0x108
00510 __arm64_sys_read+0x20/0x30
00510 invoke_syscall.constprop.0+0x54/0xe8
00510 do_el0_svc+0x44/0xc8
00510 el0_svc+0x18/0x58
00510 el0t_64_sync_handler+0x104/0x130
00510 el0t_64_sync+0x154/0x158
00510 Code: d5384100 f9401c01 b9401aa3 b40002e1 (f8227881)
00510 ---[ end trace 0000000000000000 ]---
00510 Kernel panic - not syncing: Oops: Fatal exception
00510 SMP: stopping secondary CPUs
00510 Kernel Offset: disabled
00510 CPU features: 0x0000,000000e0,00000410,8240500b
00510 Memory Limit: none
Investigation indicates that these bits are already set when we allocate
slab page and are not zeroed out after allocation. We are not yet sure
why these crashes start happening only recently but regardless of the
reason, not initializing a field that gets used later is wrong. Fix it
by initializing slab->obj_exts during slab page allocation.
-
CVE-2025-37773
•
published on May 1, 2025
In the Linux kernel, the following vulnerability has been resolved:
virtiofs: add filesystem context source name check
In certain scenarios, for example, during fuzz testing, the source
name may be NULL, which could lead to a kernel panic. Therefore, an
extra check for the source name should be added.
-
CVE-2025-37772
•
published on May 1, 2025
In the Linux kernel, the following vulnerability has been resolved:
RDMA/cma: Fix workqueue crash in cma_netevent_work_handler
struct rdma_cm_id has member "struct work_struct net_work"
that is reused for enqueuing cma_netevent_work_handler()s
onto cma_wq.
Below crash[1] can occur if more than one call to
cma_netevent_callback() occurs in quick succession,
which further enqueues cma_netevent_work_handler()s for the
same rdma_cm_id, overwriting any previously queued work-item(s)
that was just scheduled to run i.e. there is no guarantee
the queued work item may run between two successive calls
to cma_netevent_callback() and the 2nd INIT_WORK would overwrite
the 1st work item (for the same rdma_cm_id), despite grabbing
id_table_lock during enqueue.
Also drgn analysis [2] indicates the work item was likely overwritten.
Fix this by moving the INIT_WORK() to __rdma_create_id(),
so that it doesn't race with any existing queue_work() or
its worker thread.
[1] Trimmed crash stack:
=============================================
BUG: kernel NULL pointer dereference, address: 0000000000000008
kworker/u256:6 ... 6.12.0-0...
Workqueue: cma_netevent_work_handler [rdma_cm] (rdma_cm)
RIP: 0010:process_one_work+0xba/0x31a
Call Trace:
worker_thread+0x266/0x3a0
kthread+0xcf/0x100
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
=============================================
[2] drgn crash analysis:
>> trace = prog.crashed_thread().stack_trace()
>>> trace
(0) crash_setup_regs (./arch/x86/include/asm/kexec.h:111:15)
(1) __crash_kexec (kernel/crash_core.c:122:4)
(2) panic (kernel/panic.c:399:3)
(3) oops_end (arch/x86/kernel/dumpstack.c:382:3)
...
(8) process_one_work (kernel/workqueue.c:3168:2)
(9) process_scheduled_works (kernel/workqueue.c:3310:3)
(10) worker_thread (kernel/workqueue.c:3391:4)
(11) kthread (kernel/kthread.c:389:9)
Line workqueue.c:3168 for this kernel version is in process_one_work():
3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN);
>>> trace[8]["work"]
*(struct work_struct *)0xffff92577d0a21d8 = {
.data = (atomic_long_t){
.counter = (s64)536870912, === Note
},
.entry = (struct list_head){
.next = (struct list_head *)0xffff924d075924c0,
.prev = (struct list_head *)0xffff924d075924c0,
},
.func = (work_func_t)cma_netevent_work_handler+0x0 = 0xffffffffc2cec280,
}
Suspicion is that pwq is NULL:
>>> trace[8]["pwq"]
(struct pool_workqueue *)
In process_one_work(), pwq is assigned from:
struct pool_workqueue *pwq = get_work_pwq(work);
and get_work_pwq() is:
static struct pool_workqueue *get_work_pwq(struct work_struct *work)
{
unsigned long data = atomic_long_read(&work->data);
if (data & WORK_STRUCT_PWQ)
return work_struct_pwq(data);
else
return NULL;
}
WORK_STRUCT_PWQ is 0x4:
>>> print(repr(prog['WORK_STRUCT_PWQ']))
Object(prog, 'enum work_flags', value=4)
But work->data is 536870912 which is 0x20000000.
So, get_work_pwq() returns NULL and we crash in process_one_work():
3168 strscpy(worker->desc, pwq->wq->name, WORKER_DESC_LEN);
=============================================
-
CVE-2025-37771
•
published on May 1, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
-
CVE-2025-37770
•
published on May 1, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
-
CVE-2025-37769
•
published on May 1, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm/smu11: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
(cherry picked from commit da7dc714a8f8e1c9fc33c57cd63583779a3bef71)
-
CVE-2025-37768
•
published on May 1, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
-
CVE-2025-37767
•
published on May 1, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
-
CVE-2025-37766
•
published on May 1, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
-
CVE-2025-37765
•
published on May 1, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: prime: fix ttm_bo_delayed_delete oops
Fix an oops in ttm_bo_delayed_delete which results from dererencing a
dangling pointer:
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b7b: 0000 [#1] PREEMPT SMP
CPU: 4 UID: 0 PID: 1082 Comm: kworker/u65:2 Not tainted 6.14.0-rc4-00267-g505460b44513-dirty #216
Hardware name: LENOVO 82N6/LNVNB161216, BIOS GKCN65WW 01/16/2024
Workqueue: ttm ttm_bo_delayed_delete [ttm]
RIP: 0010:dma_resv_iter_first_unlocked+0x55/0x290
Code: 31 f6 48 c7 c7 00 2b fa aa e8 97 bd 52 ff e8 a2 c1 53 00 5a 85 c0 74 48 e9 88 01 00 00 4c 89 63 20 4d 85 e4 0f 84 30 01 00 00 41 8b 44 24 10 c6 43 2c 01 48 89 df 89 43 28 e8 97 fd ff ff 4c 8b
RSP: 0018:ffffbf9383473d60 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffffbf9383473d88 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffbf9383473d78 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 6b6b6b6b6b6b6b6b
R13: ffffa003bbf78580 R14: ffffa003a6728040 R15: 00000000000383cc
FS: 0000000000000000(0000) GS:ffffa00991c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000758348024dd0 CR3: 000000012c259000 CR4: 0000000000f50ef0
PKRU: 55555554
Call Trace:
? __die_body.cold+0x19/0x26
? die_addr+0x3d/0x70
? exc_general_protection+0x159/0x460
? asm_exc_general_protection+0x27/0x30
? dma_resv_iter_first_unlocked+0x55/0x290
dma_resv_wait_timeout+0x56/0x100
ttm_bo_delayed_delete+0x69/0xb0 [ttm]
process_one_work+0x217/0x5c0
worker_thread+0x1c8/0x3d0
? apply_wqattrs_cleanup.part.0+0xc0/0xc0
kthread+0x10b/0x240
? kthreads_online_cpu+0x140/0x140
ret_from_fork+0x40/0x70
? kthreads_online_cpu+0x140/0x140
ret_from_fork_asm+0x11/0x20
The cause of this is:
- drm_prime_gem_destroy calls dma_buf_put(dma_buf) which releases the
reference to the shared dma_buf. The reference count is 0, so the
dma_buf is destroyed, which in turn decrements the corresponding
amdgpu_bo reference count to 0, and the amdgpu_bo is destroyed -
calling drm_gem_object_release then dma_resv_fini (which destroys the
reservation object), then finally freeing the amdgpu_bo.
- nouveau_bo obj->bo.base.resv is now a dangling pointer to the memory
formerly allocated to the amdgpu_bo.
- nouveau_gem_object_del calls ttm_bo_put(&nvbo->bo) which calls
ttm_bo_release, which schedules ttm_bo_delayed_delete.
- ttm_bo_delayed_delete runs and dereferences the dangling resv pointer,
resulting in a general protection fault.
Fix this by moving the drm_prime_gem_destroy call from
nouveau_gem_object_del to nouveau_bo_del_ttm. This ensures that it will
be run after ttm_bo_delayed_delete.
-
CVE-2025-37764
•
published on May 1, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: fix firmware memory leaks
Free the memory used to hold the results of firmware image processing
when the module is unloaded.
Fix the related issue of the same memory being leaked if processing
of the firmware image fails during module load.
Ensure all firmware GEM objects are destroyed if firmware image
processing fails.
Fixes memory leaks on powervr module unload detected by Kmemleak:
unreferenced object 0xffff000042e20000 (size 94208):
comm "modprobe", pid 470, jiffies 4295277154
hex dump (first 32 bytes):
02 ae 7f ed bf 45 84 00 3c 5b 1f ed 9f 45 45 05 .....E..[...EE.
d5 4f 5d 14 6c 00 3d 23 30 d0 3a 4a 66 0e 48 c8 .O].l.=#0.:Jf.H.
backtrace (crc dd329dec):
kmemleak_alloc+0x30/0x40
___kmalloc_large_node+0x140/0x188
__kmalloc_large_node_noprof+0x2c/0x13c
__kmalloc_noprof+0x48/0x4c0
pvr_fw_init+0xaa4/0x1f50 [powervr]
unreferenced object 0xffff000042d20000 (size 20480):
comm "modprobe", pid 470, jiffies 4295277154
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 09 00 00 00 0b 00 00 00 ................
00 00 00 00 00 00 00 00 07 00 00 00 08 00 00 00 ................
backtrace (crc 395b02e3):
kmemleak_alloc+0x30/0x40
___kmalloc_large_node+0x140/0x188
__kmalloc_large_node_noprof+0x2c/0x13c
__kmalloc_noprof+0x48/0x4c0
pvr_fw_init+0xb0c/0x1f50 [powervr]
-
CVE-2025-37763
•
published on May 1, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: take paired job reference
For paired jobs, have the fragment job take a reference on the
geometry job, so that the geometry job cannot be freed until
the fragment job has finished with it.
The geometry job structure is accessed when the fragment job is being
prepared by the GPU scheduler. Taking the reference prevents the
geometry job being freed until the fragment job no longer requires it.
Fixes a use after free bug detected by KASAN:
[ 124.256386] BUG: KASAN: slab-use-after-free in pvr_queue_prepare_job+0x108/0x868 [powervr]
[ 124.264893] Read of size 1 at addr ffff0000084cb960 by task kworker/u16:4/63
-
CVE-2025-37762
•
published on May 1, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: Fix missed dmabuf unpinning in error path of prepare_fb()
Correct error handling in prepare_fb() to fix leaking resources when
error happens.
-
CVE-2025-37761
•
published on May 1, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix an out-of-bounds shift when invalidating TLB
When the size of the range invalidated is larger than
rounddown_pow_of_two(ULONG_MAX),
The function macro roundup_pow_of_two(length) will hit an out-of-bounds
shift [1].
Use a full TLB invalidation for such cases.
v2:
- Use a define for the range size limit over which we use a full
TLB invalidation. (Lucas)
- Use a better calculation of the limit.
[1]:
[ 39.202421] ------------[ cut here ]------------
[ 39.202657] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
[ 39.202673] shift exponent 64 is too large for 64-bit type 'long unsigned int'
[ 39.202688] CPU: 8 UID: 0 PID: 3129 Comm: xe_exec_system_ Tainted: G U 6.14.0+ #10
[ 39.202690] Tainted: [U]=USER
[ 39.202690] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023
[ 39.202691] Call Trace:
[ 39.202692] TASK
[ 39.202695] dump_stack_lvl+0x6e/0xa0
[ 39.202699] ubsan_epilogue+0x5/0x30
[ 39.202701] __ubsan_handle_shift_out_of_bounds.cold+0x61/0xe6
[ 39.202705] xe_gt_tlb_invalidation_range.cold+0x1d/0x3a [xe]
[ 39.202800] ? find_held_lock+0x2b/0x80
[ 39.202803] ? mark_held_locks+0x40/0x70
[ 39.202806] xe_svm_invalidate+0x459/0x700 [xe]
[ 39.202897] drm_gpusvm_notifier_invalidate+0x4d/0x70 [drm_gpusvm]
[ 39.202900] __mmu_notifier_release+0x1f5/0x270
[ 39.202905] exit_mmap+0x40e/0x450
[ 39.202912] __mmput+0x45/0x110
[ 39.202914] exit_mm+0xc5/0x130
[ 39.202916] do_exit+0x21c/0x500
[ 39.202918] ? lockdep_hardirqs_on_prepare+0xdb/0x190
[ 39.202920] do_group_exit+0x36/0xa0
[ 39.202922] get_signal+0x8f8/0x900
[ 39.202926] arch_do_signal_or_restart+0x35/0x100
[ 39.202930] syscall_exit_to_user_mode+0x1fc/0x290
[ 39.202932] do_syscall_64+0xa1/0x180
[ 39.202934] ? do_user_addr_fault+0x59f/0x8a0
[ 39.202937] ? lock_release+0xd2/0x2a0
[ 39.202939] ? do_user_addr_fault+0x5a9/0x8a0
[ 39.202942] ? trace_hardirqs_off+0x4b/0xc0
[ 39.202944] ? clear_bhb_loop+0x25/0x80
[ 39.202946] ? clear_bhb_loop+0x25/0x80
[ 39.202947] ? clear_bhb_loop+0x25/0x80
[ 39.202950] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 39.202952] RIP: 0033:0x7fa945e543e1
[ 39.202961] Code: Unable to access opcode bytes at 0x7fa945e543b7.
[ 39.202962] RSP: 002b:00007ffca8fb4170 EFLAGS: 00000293
[ 39.202963] RAX: 000000000000003d RBX: 0000000000000000 RCX: 00007fa945e543e3
[ 39.202964] RDX: 0000000000000000 RSI: 00007ffca8fb41ac RDI: 00000000ffffffff
[ 39.202964] RBP: 00007ffca8fb4190 R08: 0000000000000000 R09: 00007fa945f600a0
[ 39.202965] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000
[ 39.202966] R13: 00007fa9460dd310 R14: 00007ffca8fb41ac R15: 0000000000000000
[ 39.202970]
[ 39.202970] ---[ end trace ]---
(cherry picked from commit b88f48f86500bc0b44b4f73ac66d500a40d320ad)
-
CVE-2025-37760
•
published on May 1, 2025
In the Linux kernel, the following vulnerability has been resolved:
mm/vma: add give_up_on_oom option on modify/merge, use in uffd release
Currently, if a VMA merge fails due to an OOM condition arising on commit
merge or a failure to duplicate anon_vma's, we report this so the caller
can handle it.
However there are cases where the caller is only ostensibly trying a
merge, and doesn't mind if it fails due to this condition.
Since we do not want to introduce an implicit assumption that we only
actually modify VMAs after OOM conditions might arise, add a 'give up on
oom' option and make an explicit contract that, should this flag be set, we
absolutely will not modify any VMAs should OOM arise and just bail out.
Since it'd be very unusual for a user to try to vma_modify() with this flag
set but be specifying a range within a VMA which ends up being split (which
can fail due to rlimit issues, not only OOM), we add a debug warning for
this condition.
The motivating reason for this is uffd release - syzkaller (and Pedro
Falcato's VERY astute analysis) found a way in which an injected fault on
allocation, triggering an OOM condition on commit merge, would result in
uffd code becoming confused and treating an error value as if it were a VMA
pointer.
To avoid this, we make use of this new VMG flag to ensure that this never
occurs, utilising the fact that, should we be clearing entire VMAs, we do
not wish an OOM event to be reported to us.
Many thanks to Pedro Falcato for his excellent analysis and Jann Horn for
his insightful and intelligent analysis of the situation, both of whom were
instrumental in this fix.
-
CVE-2024-11994
•
published on May 1, 2025
APM server logs could contain parts of the document body from a partially failed bulk index request. Depending on the nature of the document, this could disclose sensitive information in APM Server error logs.
-
CVE-2024-52976
•
published on May 1, 2025
Inclusion of functionality from an untrusted control sphere in Elastic Agent subprocess, osqueryd, allows local attackers to execute arbitrary code via parameter injection.
An attacker requires local access and the ability to modify osqueryd configurations.
