Full List

Search

Recent Vulnerabilities

• CVE-2026-67314 • published on August 1, 2026 axios versions =1.15.2 and 1.18.0 contain prototype-pollution read-side gadgets in Basic auth subfield handling (lib/adapters/http.js and lib/helpers/resolveConfig.js). When an application is already affected by a separate prototype-pollution primitive and makes an axios request with an own auth object that omits the username and/or password properties, axios reads the inherited Object.prototype.username and Object.prototype.password values and uses them to construct an outbound 'Authorization: Basic ...' header. axios itself does not pollute prototypes. The practical impact is outbound request tampering: an attacker who controls the polluted prototype values can inject attacker-chosen Basic auth credentials or replace an existing Authorization header. Credential disclosure is only possible under additional application-specific conditions.
• CVE-2026-67290 • published on August 1, 2026 FreeRDP before 3.29.0 contains a heap out-of-bounds read vulnerability in the TSMF FFmpeg decoder when parsing AVC1 MPEG2VIDEOINFO media types with insufficient ExtraData. Attackers can send malformed media format data from a server to trigger a crash by reading fixed offsets without validating source buffer length.
• CVE-2026-67290 • published on August 1, 2026 FreeRDP before 3.29.0 contains a heap out-of-bounds read vulnerability in the TSMF FFmpeg decoder when parsing AVC1 MPEG2VIDEOINFO media types with insufficient ExtraData. Attackers can send malformed media format data from a server to trigger a crash by reading fixed offsets without validating source buffer length.
• CVE-2026-67313 • published on August 1, 2026 axios versions 0.28.0 and later contain uncontrolled recursion in formDataToJSON when processing FormData field names with deeply nested bracket segments. Attackers can supply FormData with field names containing thousands of nested brackets to exhaust the JavaScript call stack and trigger RangeError, causing request failure or process termination in applications that do not handle the exception.
• CVE-2026-67313 • published on August 1, 2026 axios versions 0.28.0 and later contain uncontrolled recursion in formDataToJSON when processing FormData field names with deeply nested bracket segments. Attackers can supply FormData with field names containing thousands of nested brackets to exhaust the JavaScript call stack and trigger RangeError, causing request failure or process termination in applications that do not handle the exception.
• CVE-2026-67352 • published on August 1, 2026 luci-app-https-dns-proxy contains a stored cross-site scripting vulnerability in the resolver_url parameter that allows authenticated users to inject active HTML. When an administrator views the HTTPS DNS Proxy status page, the resolver URL is rendered as raw HTML and executes JavaScript in the administrator's browser origin.
• CVE-2026-67352 • published on August 1, 2026 luci-app-https-dns-proxy contains a stored cross-site scripting vulnerability in the resolver_url parameter that allows authenticated users to inject active HTML. When an administrator views the HTTPS DNS Proxy status page, the resolver URL is rendered as raw HTML and executes JavaScript in the administrator's browser origin.
• CVE-2026-10773 • published on August 1, 2026 The DHCPv4 client helper net_dhcpv4_msg_type_name() in subsys/net/lib/dhcpv4/dhcpv4.c indexes a static 8-element const char * name table after a faulty bounds check. The guard used msg_type = sizeof(name) instead of msg_type <= ARRAY_SIZE(name); sizeof returns the byte size of the pointer array (32 on 32-bit, 64 on 64-bit targets) rather than the element count of 8, so message-type values from 9 up to that byte size pass the check and cause name[msg_type - 1] to read past the end of the array. The msg_type value originates from the DHCP MESSAGE TYPE option, which is read as an unchecked raw byte from a received packet (net_pkt_read_u8) and passed unmodified into the lookup. A DHCP server, or any host able to inject a spoofed DHCP reply onto the client's link, can therefore drive the index out of bounds. The out-of-range slot yields a garbage const char * that is then dereferenced by a %s log conversion. The lookup is reached only from a debug log statement (NET_DBG / LOG_DBG), so the out-of-bounds read is triggerable only when the DHCPv4 log module is built at DEBUG level (CONFIG_NET_DHCPV4_LOG_LEVEL_DBG), which is not the default configuration. When that condition holds, the result is an out-of-bounds read and a wild-pointer dereference: most likely a crash of the DHCP client (denial of service) and potentially disclosure of an adjacent pointer's contents through the log output. The fix replaces sizeof with ARRAY_SIZE, restoring the correct 1..8 acceptance window.
• CVE-2026-10773 • published on August 1, 2026 The DHCPv4 client helper net_dhcpv4_msg_type_name() in subsys/net/lib/dhcpv4/dhcpv4.c indexes a static 8-element const char * name table after a faulty bounds check. The guard used msg_type = sizeof(name) instead of msg_type <= ARRAY_SIZE(name); sizeof returns the byte size of the pointer array (32 on 32-bit, 64 on 64-bit targets) rather than the element count of 8, so message-type values from 9 up to that byte size pass the check and cause name[msg_type - 1] to read past the end of the array. The msg_type value originates from the DHCP MESSAGE TYPE option, which is read as an unchecked raw byte from a received packet (net_pkt_read_u8) and passed unmodified into the lookup. A DHCP server, or any host able to inject a spoofed DHCP reply onto the client's link, can therefore drive the index out of bounds. The out-of-range slot yields a garbage const char * that is then dereferenced by a %s log conversion. The lookup is reached only from a debug log statement (NET_DBG / LOG_DBG), so the out-of-bounds read is triggerable only when the DHCPv4 log module is built at DEBUG level (CONFIG_NET_DHCPV4_LOG_LEVEL_DBG), which is not the default configuration. When that condition holds, the result is an out-of-bounds read and a wild-pointer dereference: most likely a crash of the DHCP client (denial of service) and potentially disclosure of an adjacent pointer's contents through the log output. The fix replaces sizeof with ARRAY_SIZE, restoring the correct 1..8 acceptance window.
• CVE-2026-2411 • published on August 1, 2026 Zephyr's Bluetooth host declares a GATT characteristic as two consecutive attributes: a Characteristic Declaration whose permission is hard-coded to BT_GATT_PERM_READ, and a Characteristic Value attribute that carries the application-specified security permissions (e.g. BT_GATT_PERM_READ_ENCRYPT / READ_AUTHEN / READ_LESC). The public notify and indicate APIs explicitly accept either attribute, and passing the declaration is the documented, common idiom. Before sending each notification or indication, the host re-checks link security with bt_gatt_check_perm() against params-attr in gatt_notify(), gatt_indicate(), and gatt_notify_multiple_verify_params() (subsys/bluetooth/host/gatt.c). When the application passed the Characteristic Declaration attribute, the host correctly redirected the value handle but left params->attr pointing at the declaration, so the security check evaluated the declaration's permissions (no security required) instead of the value's. As a result the encryption/authentication/LESC requirement configured on the characteristic value was skipped. The Notify-Multiple path additionally used a mask that omitted the LE Secure Connections requirement. A remote peer triggers the disclosure by connecting (optionally without pairing or encryption) and writing the Client Characteristic Configuration descriptor to enable notifications or indications, causing the server to emit the protected value over a link that has not reached the required security level. The impact is information disclosure / access-control bypass for characteristic values the application intended to expose only over a secured link; exposure depends on the application declaring encrypt/authen-required notify/indicate characteristics and on the CCC being writable at a lower security tier. There is no memory-safety or availability impact. The fix adds bt_gatt_attr_resolve_value(), which maps a declaration attribute to the following value attribute before the permission check, and switches the Notify-Multiple path to the full BT_GATT_PERM_READ_ENCRYPT_MASK so the LESC requirement is also enforced.
• CVE-2026-2411 • published on August 1, 2026 Zephyr's Bluetooth host declares a GATT characteristic as two consecutive attributes: a Characteristic Declaration whose permission is hard-coded to BT_GATT_PERM_READ, and a Characteristic Value attribute that carries the application-specified security permissions (e.g. BT_GATT_PERM_READ_ENCRYPT / READ_AUTHEN / READ_LESC). The public notify and indicate APIs explicitly accept either attribute, and passing the declaration is the documented, common idiom. Before sending each notification or indication, the host re-checks link security with bt_gatt_check_perm() against params-attr in gatt_notify(), gatt_indicate(), and gatt_notify_multiple_verify_params() (subsys/bluetooth/host/gatt.c). When the application passed the Characteristic Declaration attribute, the host correctly redirected the value handle but left params->attr pointing at the declaration, so the security check evaluated the declaration's permissions (no security required) instead of the value's. As a result the encryption/authentication/LESC requirement configured on the characteristic value was skipped. The Notify-Multiple path additionally used a mask that omitted the LE Secure Connections requirement. A remote peer triggers the disclosure by connecting (optionally without pairing or encryption) and writing the Client Characteristic Configuration descriptor to enable notifications or indications, causing the server to emit the protected value over a link that has not reached the required security level. The impact is information disclosure / access-control bypass for characteristic values the application intended to expose only over a secured link; exposure depends on the application declaring encrypt/authen-required notify/indicate characteristics and on the CCC being writable at a lower security tier. There is no memory-safety or availability impact. The fix adds bt_gatt_attr_resolve_value(), which maps a declaration attribute to the following value attribute before the permission check, and switches the Notify-Multiple path to the full BT_GATT_PERM_READ_ENCRYPT_MASK so the LESC requirement is also enforced.
• CVE-2026-18536 • published on August 1, 2026 Data::Entropy versions before 0.010 for Perl read remote entropy sources over plain HTTP. The Data::Entropy::RawSource::RandomOrg and Data::Entropy::RawSource::RandomnumbersInfo remote sources are accessed over plain HTTP. The Data::Entropy::RawSource::RandomOrg integrity check trivially matches any non-empty byte string. Any on-path attacker, such as open WiFi, a compromised ISP, captive portal, or a hostile egress proxy substitutes the response and thereby chooses the bytes returned by rand_bits and rand_int for every application that selected one of these sources via with_entropy_source. The _checkbuf method response is equally attacker-controlled, so the retry/sleep behaviour is steerable too.
• CVE-2026-18536 • published on August 1, 2026 Data::Entropy versions before 0.010 for Perl read remote entropy sources over plain HTTP. The Data::Entropy::RawSource::RandomOrg and Data::Entropy::RawSource::RandomnumbersInfo remote sources are accessed over plain HTTP. The Data::Entropy::RawSource::RandomOrg integrity check trivially matches any non-empty byte string. Any on-path attacker, such as open WiFi, a compromised ISP, captive portal, or a hostile egress proxy substitutes the response and thereby chooses the bytes returned by rand_bits and rand_int for every application that selected one of these sources via with_entropy_source. The _checkbuf method response is equally attacker-controlled, so the retry/sleep behaviour is steerable too.
• CVE-2026-16635 • published on August 1, 2026 The Pronamic Pay plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 10.1.0 This is due to the `maybe_update_user_role()` function passing an attacker-controlled Gravity Forms field value (`$lead[$feed-user_role_field_id]`) directly into `WP_User::set_role()` without any allowlist validation, capability comparison, or permission check to constrain which roles can be assigned. This makes it possible for authenticated attackers, with Subscriber-level access and above, to escalate their own WordPress account to Administrator by tampering with the role field value in a form submission. Exploitation requires that an administrator has already configured a Pronamic Pay payment feed in Gravity Forms with the **Update User Role** option enabled and mapped to a form field; once that configuration is in place, no further preconditions exist to prevent an authenticated attacker from exploiting this vulnerability.
• CVE-2026-16635 • published on August 1, 2026 The Pronamic Pay plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 10.1.0 This is due to the `maybe_update_user_role()` function passing an attacker-controlled Gravity Forms field value (`$lead[$feed-user_role_field_id]`) directly into `WP_User::set_role()` without any allowlist validation, capability comparison, or permission check to constrain which roles can be assigned. This makes it possible for authenticated attackers, with Subscriber-level access and above, to escalate their own WordPress account to Administrator by tampering with the role field value in a form submission. Exploitation requires that an administrator has already configured a Pronamic Pay payment feed in Gravity Forms with the **Update User Role** option enabled and mapped to a form field; once that configuration is in place, no further preconditions exist to prevent an authenticated attacker from exploiting this vulnerability.
• CVE-2026-18344 • published on August 1, 2026 The Wp Responsive Thumbnail Slider plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'id' parameter in versions up to, and excluding, 1.1.53. This is due to insufficient input sanitization and output escaping in the responsive_thumbnail_image_management() function, which echoes $_GET['id'] directly into a double-quoted HTML attribute with no esc_attr() call. The only guard is a loose PHP numeric comparison ($_GET['id']0) that a string beginning with a numeric prefix trivially satisfies, and the addslashes() applied by wp_magic_quotes() is inert in HTML-attribute context because backslash is not an HTML escape character. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a specially crafted link.
• CVE-2026-18344 • published on August 1, 2026 The Wp Responsive Thumbnail Slider plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'id' parameter in versions up to, and excluding, 1.1.53. This is due to insufficient input sanitization and output escaping in the responsive_thumbnail_image_management() function, which echoes $_GET['id'] directly into a double-quoted HTML attribute with no esc_attr() call. The only guard is a loose PHP numeric comparison ($_GET['id']0) that a string beginning with a numeric prefix trivially satisfies, and the addslashes() applied by wp_magic_quotes() is inert in HTML-attribute context because backslash is not an HTML escape character. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a specially crafted link.
• CVE-2026-15644 • published on August 1, 2026 The Powerkit – Supercharge your WordPress Site plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'style' Shortcode Attribute in all versions up to, and including, 3.1.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
• CVE-2026-15644 • published on August 1, 2026 The Powerkit – Supercharge your WordPress Site plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'style' Shortcode Attribute in all versions up to, and including, 3.1.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
• CVE-2026-6453 • published on August 1, 2026 The CubeWP Framework plugin for WordPress is vulnerable to SQL Injection in all versions up to and including 1.1.30. This is due to insufficient input sanitization in the cubewp_remove_relation() AJAX function, specifically the use of wp_unslash() on the relation_id parameter before interpolating it directly into a raw SQL query without using $wpdb-prepare(). The wp_unslash() call explicitly removes the backslash escaping that WordPress's wp_magic_quotes() adds to all $_POST data, neutralizing the only layer of SQL injection protection. The sanitize_text_field() function applied afterward offers no SQL protection. This makes it possible for authenticated attackers, with subscriber-level access and above, to append additional SQL queries to the existing query.