Full List

Search

Recent Vulnerabilities

• CVE-2025-38448 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Fix race condition in TTY wakeup A race condition occurs when gs_start_io() calls either gs_start_rx() or gs_start_tx(), as those functions briefly drop the port_lock for usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear port.tty and port_usb, respectively. Use the null-safe TTY Port helper function to wake up TTY. Example CPU1: CPU2: gserial_connect() // lock gs_close() // await lock gs_start_rx() // unlock usb_ep_queue() gs_close() // lock, reset port.tty and unlock gs_start_rx() // lock tty_wakeup() // NPE
• CVE-2025-38448 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Fix race condition in TTY wakeup A race condition occurs when gs_start_io() calls either gs_start_rx() or gs_start_tx(), as those functions briefly drop the port_lock for usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear port.tty and port_usb, respectively. Use the null-safe TTY Port helper function to wake up TTY. Example CPU1: CPU2: gserial_connect() // lock gs_close() // await lock gs_start_rx() // unlock usb_ep_queue() gs_close() // lock, reset port.tty and unlock gs_start_rx() // lock tty_wakeup() // NPE
• CVE-2025-38448 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Fix race condition in TTY wakeup A race condition occurs when gs_start_io() calls either gs_start_rx() or gs_start_tx(), as those functions briefly drop the port_lock for usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear port.tty and port_usb, respectively. Use the null-safe TTY Port helper function to wake up TTY. Example CPU1: CPU2: gserial_connect() // lock gs_close() // await lock gs_start_rx() // unlock usb_ep_queue() gs_close() // lock, reset port.tty and unlock gs_start_rx() // lock tty_wakeup() // NPE
• CVE-2025-38448 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Fix race condition in TTY wakeup A race condition occurs when gs_start_io() calls either gs_start_rx() or gs_start_tx(), as those functions briefly drop the port_lock for usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear port.tty and port_usb, respectively. Use the null-safe TTY Port helper function to wake up TTY. Example CPU1: CPU2: gserial_connect() // lock gs_close() // await lock gs_start_rx() // unlock usb_ep_queue() gs_close() // lock, reset port.tty and unlock gs_start_rx() // lock tty_wakeup() // NPE
• CVE-2025-38448 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Fix race condition in TTY wakeup A race condition occurs when gs_start_io() calls either gs_start_rx() or gs_start_tx(), as those functions briefly drop the port_lock for usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear port.tty and port_usb, respectively. Use the null-safe TTY Port helper function to wake up TTY. Example CPU1: CPU2: gserial_connect() // lock gs_close() // await lock gs_start_rx() // unlock usb_ep_queue() gs_close() // lock, reset port.tty and unlock gs_start_rx() // lock tty_wakeup() // NPE
• CVE-2025-38448 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Fix race condition in TTY wakeup A race condition occurs when gs_start_io() calls either gs_start_rx() or gs_start_tx(), as those functions briefly drop the port_lock for usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear port.tty and port_usb, respectively. Use the null-safe TTY Port helper function to wake up TTY. Example CPU1: CPU2: gserial_connect() // lock gs_close() // await lock gs_start_rx() // unlock usb_ep_queue() gs_close() // lock, reset port.tty and unlock gs_start_rx() // lock tty_wakeup() // NPE
• CVE-2025-38447 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix potential out-of-bounds page table access during batched unmap As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio's PTE mappings are not fully contained within a single page table. While this scenario might be rare, an issue triggerable from userspace must be fixed regardless of its likelihood. This patch fixes the out-of-bounds access by refactoring the logic into a new helper, folio_unmap_pte_batch(). The new helper correctly calculates the safe batch size by capping the scan at both the VMA and PMD boundaries. To simplify the code, it also supports partial batching (i.e., any number of pages from 1 up to the calculated safe maximum), as there is no strong reason to special-case for fully mapped folios.
• CVE-2025-38447 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix potential out-of-bounds page table access during batched unmap As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio's PTE mappings are not fully contained within a single page table. While this scenario might be rare, an issue triggerable from userspace must be fixed regardless of its likelihood. This patch fixes the out-of-bounds access by refactoring the logic into a new helper, folio_unmap_pte_batch(). The new helper correctly calculates the safe batch size by capping the scan at both the VMA and PMD boundaries. To simplify the code, it also supports partial batching (i.e., any number of pages from 1 up to the calculated safe maximum), as there is no strong reason to special-case for fully mapped folios.
• CVE-2025-38447 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix potential out-of-bounds page table access during batched unmap As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio's PTE mappings are not fully contained within a single page table. While this scenario might be rare, an issue triggerable from userspace must be fixed regardless of its likelihood. This patch fixes the out-of-bounds access by refactoring the logic into a new helper, folio_unmap_pte_batch(). The new helper correctly calculates the safe batch size by capping the scan at both the VMA and PMD boundaries. To simplify the code, it also supports partial batching (i.e., any number of pages from 1 up to the calculated safe maximum), as there is no strong reason to special-case for fully mapped folios.
• CVE-2025-38447 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix potential out-of-bounds page table access during batched unmap As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio's PTE mappings are not fully contained within a single page table. While this scenario might be rare, an issue triggerable from userspace must be fixed regardless of its likelihood. This patch fixes the out-of-bounds access by refactoring the logic into a new helper, folio_unmap_pte_batch(). The new helper correctly calculates the safe batch size by capping the scan at both the VMA and PMD boundaries. To simplify the code, it also supports partial batching (i.e., any number of pages from 1 up to the calculated safe maximum), as there is no strong reason to special-case for fully mapped folios.
• CVE-2025-38447 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix potential out-of-bounds page table access during batched unmap As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio's PTE mappings are not fully contained within a single page table. While this scenario might be rare, an issue triggerable from userspace must be fixed regardless of its likelihood. This patch fixes the out-of-bounds access by refactoring the logic into a new helper, folio_unmap_pte_batch(). The new helper correctly calculates the safe batch size by capping the scan at both the VMA and PMD boundaries. To simplify the code, it also supports partial batching (i.e., any number of pages from 1 up to the calculated safe maximum), as there is no strong reason to special-case for fully mapped folios.
• CVE-2025-38447 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix potential out-of-bounds page table access during batched unmap As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio's PTE mappings are not fully contained within a single page table. While this scenario might be rare, an issue triggerable from userspace must be fixed regardless of its likelihood. This patch fixes the out-of-bounds access by refactoring the logic into a new helper, folio_unmap_pte_batch(). The new helper correctly calculates the safe batch size by capping the scan at both the VMA and PMD boundaries. To simplify the code, it also supports partial batching (i.e., any number of pages from 1 up to the calculated safe maximum), as there is no strong reason to special-case for fully mapped folios.
• CVE-2025-38447 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix potential out-of-bounds page table access during batched unmap As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio's PTE mappings are not fully contained within a single page table. While this scenario might be rare, an issue triggerable from userspace must be fixed regardless of its likelihood. This patch fixes the out-of-bounds access by refactoring the logic into a new helper, folio_unmap_pte_batch(). The new helper correctly calculates the safe batch size by capping the scan at both the VMA and PMD boundaries. To simplify the code, it also supports partial batching (i.e., any number of pages from 1 up to the calculated safe maximum), as there is no strong reason to special-case for fully mapped folios.
• CVE-2025-38447 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix potential out-of-bounds page table access during batched unmap As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio's PTE mappings are not fully contained within a single page table. While this scenario might be rare, an issue triggerable from userspace must be fixed regardless of its likelihood. This patch fixes the out-of-bounds access by refactoring the logic into a new helper, folio_unmap_pte_batch(). The new helper correctly calculates the safe batch size by capping the scan at both the VMA and PMD boundaries. To simplify the code, it also supports partial batching (i.e., any number of pages from 1 up to the calculated safe maximum), as there is no strong reason to special-case for fully mapped folios.
• CVE-2025-38447 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix potential out-of-bounds page table access during batched unmap As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio's PTE mappings are not fully contained within a single page table. While this scenario might be rare, an issue triggerable from userspace must be fixed regardless of its likelihood. This patch fixes the out-of-bounds access by refactoring the logic into a new helper, folio_unmap_pte_batch(). The new helper correctly calculates the safe batch size by capping the scan at both the VMA and PMD boundaries. To simplify the code, it also supports partial batching (i.e., any number of pages from 1 up to the calculated safe maximum), as there is no strong reason to special-case for fully mapped folios.
• CVE-2025-38447 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: mm/rmap: fix potential out-of-bounds page table access during batched unmap As pointed out by David[1], the batched unmap logic in try_to_unmap_one() may read past the end of a PTE table when a large folio's PTE mappings are not fully contained within a single page table. While this scenario might be rare, an issue triggerable from userspace must be fixed regardless of its likelihood. This patch fixes the out-of-bounds access by refactoring the logic into a new helper, folio_unmap_pte_batch(). The new helper correctly calculates the safe batch size by capping the scan at both the VMA and PMD boundaries. To simplify the code, it also supports partial batching (i.e., any number of pages from 1 up to the calculated safe maximum), as there is no strong reason to special-case for fully mapped folios.
• CVE-2025-38446 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data When num_parents is 4, __clk_register() occurs an out-of-bounds when accessing parent_names member. Use ARRAY_SIZE() instead of hardcode number here. BUG: KASAN: global-out-of-bounds in __clk_register+0x1844/0x20d8 Read of size 8 at addr ffff800086988e78 by task kworker/u24:3/59 Hardware name: NXP i.MX95 19X19 board (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x8c/0xcc print_report+0x398/0x5fc kasan_report+0xd4/0x114 __asan_report_load8_noabort+0x20/0x2c __clk_register+0x1844/0x20d8 clk_hw_register+0x44/0x110 __clk_hw_register_mux+0x284/0x3a8 imx95_bc_probe+0x4f4/0xa70
• CVE-2025-38446 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data When num_parents is 4, __clk_register() occurs an out-of-bounds when accessing parent_names member. Use ARRAY_SIZE() instead of hardcode number here. BUG: KASAN: global-out-of-bounds in __clk_register+0x1844/0x20d8 Read of size 8 at addr ffff800086988e78 by task kworker/u24:3/59 Hardware name: NXP i.MX95 19X19 board (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x8c/0xcc print_report+0x398/0x5fc kasan_report+0xd4/0x114 __asan_report_load8_noabort+0x20/0x2c __clk_register+0x1844/0x20d8 clk_hw_register+0x44/0x110 __clk_hw_register_mux+0x284/0x3a8 imx95_bc_probe+0x4f4/0xa70
• CVE-2025-38446 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data When num_parents is 4, __clk_register() occurs an out-of-bounds when accessing parent_names member. Use ARRAY_SIZE() instead of hardcode number here. BUG: KASAN: global-out-of-bounds in __clk_register+0x1844/0x20d8 Read of size 8 at addr ffff800086988e78 by task kworker/u24:3/59 Hardware name: NXP i.MX95 19X19 board (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x8c/0xcc print_report+0x398/0x5fc kasan_report+0xd4/0x114 __asan_report_load8_noabort+0x20/0x2c __clk_register+0x1844/0x20d8 clk_hw_register+0x44/0x110 __clk_hw_register_mux+0x284/0x3a8 imx95_bc_probe+0x4f4/0xa70
• CVE-2025-38446 • published on July 25, 2025 In the Linux kernel, the following vulnerability has been resolved: clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data When num_parents is 4, __clk_register() occurs an out-of-bounds when accessing parent_names member. Use ARRAY_SIZE() instead of hardcode number here. BUG: KASAN: global-out-of-bounds in __clk_register+0x1844/0x20d8 Read of size 8 at addr ffff800086988e78 by task kworker/u24:3/59 Hardware name: NXP i.MX95 19X19 board (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x8c/0xcc print_report+0x398/0x5fc kasan_report+0xd4/0x114 __asan_report_load8_noabort+0x20/0x2c __clk_register+0x1844/0x20d8 clk_hw_register+0x44/0x110 __clk_hw_register_mux+0x284/0x3a8 imx95_bc_probe+0x4f4/0xa70