-
CVE-2026-39849
•
published on May 5, 2026
Pi-hole FTL is the core engine of the Pi-hole network-level advertisement and tracker blocker. In versions before 6.6.1, the `dns.interface` configuration field in Pi-hole FTL accepted newline characters without validation, allowing an attacker to inject arbitrary directives into the generated dnsmasq configuration file. On installations with no admin password set (the default for many deployments), the configuration API is fully accessible without credentials, allowing a network-adjacent attacker to inject the payload, enable the built-in DHCP server, and achieve arbitrary command execution on the host the next time any device on the network requests a DHCP lease. The injected value is persisted to /etc/pihole/pihole.toml and survives restarts. The strncpy in the code path limits the total interface field to 31 bytes, but payloads such as wlan0\ndhcp-script=/tmp/p fit within this constraint. The dnsmasq config validation introduced in FTL 6.6 only checks syntactic validity, so valid directives injected via newline pass validation successfully. This issue has been fixed in version 6.6.1.
-
CVE-2026-39849
•
published on May 5, 2026
Pi-hole FTL is the core engine of the Pi-hole network-level advertisement and tracker blocker. In versions before 6.6.1, the `dns.interface` configuration field in Pi-hole FTL accepted newline characters without validation, allowing an attacker to inject arbitrary directives into the generated dnsmasq configuration file. On installations with no admin password set (the default for many deployments), the configuration API is fully accessible without credentials, allowing a network-adjacent attacker to inject the payload, enable the built-in DHCP server, and achieve arbitrary command execution on the host the next time any device on the network requests a DHCP lease. The injected value is persisted to /etc/pihole/pihole.toml and survives restarts. The strncpy in the code path limits the total interface field to 31 bytes, but payloads such as wlan0\ndhcp-script=/tmp/p fit within this constraint. The dnsmasq config validation introduced in FTL 6.6 only checks syntactic validity, so valid directives injected via newline pass validation successfully. This issue has been fixed in version 6.6.1.
-
CVE-2026-39849
•
published on May 5, 2026
Pi-hole FTL is the core engine of the Pi-hole network-level advertisement and tracker blocker. In versions before 6.6.1, the `dns.interface` configuration field in Pi-hole FTL accepted newline characters without validation, allowing an attacker to inject arbitrary directives into the generated dnsmasq configuration file. On installations with no admin password set (the default for many deployments), the configuration API is fully accessible without credentials, allowing a network-adjacent attacker to inject the payload, enable the built-in DHCP server, and achieve arbitrary command execution on the host the next time any device on the network requests a DHCP lease. The injected value is persisted to /etc/pihole/pihole.toml and survives restarts. The strncpy in the code path limits the total interface field to 31 bytes, but payloads such as wlan0\ndhcp-script=/tmp/p fit within this constraint. The dnsmasq config validation introduced in FTL 6.6 only checks syntactic validity, so valid directives injected via newline pass validation successfully. This issue has been fixed in version 6.6.1.
-
CVE-2026-39849
•
published on May 5, 2026
Pi-hole FTL is the core engine of the Pi-hole network-level advertisement and tracker blocker. In versions before 6.6.1, the `dns.interface` configuration field in Pi-hole FTL accepted newline characters without validation, allowing an attacker to inject arbitrary directives into the generated dnsmasq configuration file. On installations with no admin password set (the default for many deployments), the configuration API is fully accessible without credentials, allowing a network-adjacent attacker to inject the payload, enable the built-in DHCP server, and achieve arbitrary command execution on the host the next time any device on the network requests a DHCP lease. The injected value is persisted to /etc/pihole/pihole.toml and survives restarts. The strncpy in the code path limits the total interface field to 31 bytes, but payloads such as wlan0\ndhcp-script=/tmp/p fit within this constraint. The dnsmasq config validation introduced in FTL 6.6 only checks syntactic validity, so valid directives injected via newline pass validation successfully. This issue has been fixed in version 6.6.1.
-
CVE-2026-39849
•
published on May 5, 2026
Pi-hole FTL is the core engine of the Pi-hole network-level advertisement and tracker blocker. In versions before 6.6.1, the `dns.interface` configuration field in Pi-hole FTL accepted newline characters without validation, allowing an attacker to inject arbitrary directives into the generated dnsmasq configuration file. On installations with no admin password set (the default for many deployments), the configuration API is fully accessible without credentials, allowing a network-adjacent attacker to inject the payload, enable the built-in DHCP server, and achieve arbitrary command execution on the host the next time any device on the network requests a DHCP lease. The injected value is persisted to /etc/pihole/pihole.toml and survives restarts. The strncpy in the code path limits the total interface field to 31 bytes, but payloads such as wlan0\ndhcp-script=/tmp/p fit within this constraint. The dnsmasq config validation introduced in FTL 6.6 only checks syntactic validity, so valid directives injected via newline pass validation successfully. This issue has been fixed in version 6.6.1.
-
CVE-2026-39849
•
published on May 5, 2026
Pi-hole FTL is the core engine of the Pi-hole network-level advertisement and tracker blocker. In versions before 6.6.1, the `dns.interface` configuration field in Pi-hole FTL accepted newline characters without validation, allowing an attacker to inject arbitrary directives into the generated dnsmasq configuration file. On installations with no admin password set (the default for many deployments), the configuration API is fully accessible without credentials, allowing a network-adjacent attacker to inject the payload, enable the built-in DHCP server, and achieve arbitrary command execution on the host the next time any device on the network requests a DHCP lease. The injected value is persisted to /etc/pihole/pihole.toml and survives restarts. The strncpy in the code path limits the total interface field to 31 bytes, but payloads such as wlan0\ndhcp-script=/tmp/p fit within this constraint. The dnsmasq config validation introduced in FTL 6.6 only checks syntactic validity, so valid directives injected via newline pass validation successfully. This issue has been fixed in version 6.6.1.
-
CVE-2026-39849
•
published on May 5, 2026
Pi-hole FTL is the core engine of the Pi-hole network-level advertisement and tracker blocker. In versions before 6.6.1, the `dns.interface` configuration field in Pi-hole FTL accepted newline characters without validation, allowing an attacker to inject arbitrary directives into the generated dnsmasq configuration file. On installations with no admin password set (the default for many deployments), the configuration API is fully accessible without credentials, allowing a network-adjacent attacker to inject the payload, enable the built-in DHCP server, and achieve arbitrary command execution on the host the next time any device on the network requests a DHCP lease. The injected value is persisted to /etc/pihole/pihole.toml and survives restarts. The strncpy in the code path limits the total interface field to 31 bytes, but payloads such as wlan0\ndhcp-script=/tmp/p fit within this constraint. The dnsmasq config validation introduced in FTL 6.6 only checks syntactic validity, so valid directives injected via newline pass validation successfully. This issue has been fixed in version 6.6.1.
-
CVE-2026-39849
•
published on May 5, 2026
Pi-hole FTL is the core engine of the Pi-hole network-level advertisement and tracker blocker. In versions before 6.6.1, the `dns.interface` configuration field in Pi-hole FTL accepted newline characters without validation, allowing an attacker to inject arbitrary directives into the generated dnsmasq configuration file. On installations with no admin password set (the default for many deployments), the configuration API is fully accessible without credentials, allowing a network-adjacent attacker to inject the payload, enable the built-in DHCP server, and achieve arbitrary command execution on the host the next time any device on the network requests a DHCP lease. The injected value is persisted to /etc/pihole/pihole.toml and survives restarts. The strncpy in the code path limits the total interface field to 31 bytes, but payloads such as wlan0\ndhcp-script=/tmp/p fit within this constraint. The dnsmasq config validation introduced in FTL 6.6 only checks syntactic validity, so valid directives injected via newline pass validation successfully. This issue has been fixed in version 6.6.1.
-
CVE-2026-39402
•
published on May 5, 2026
lxc is a Linux container runtime. In the setuid helper lxc-user-nic, the delete path contains a logic flaw in the find_line() function that allows an unprivileged user to delete OVS-attached network interfaces belonging to other users. When lxc-user-nic delete scans its NIC database to authorize a deletion request, the interface name comparison can set the authorization flag based on a name match alone, even when the ownership, type, and link fields in that database entry belong to a different user. The vulnerable check sits after the goto next label handling, meaning it is reachable on lines where earlier ownership checks failed or were skipped. Because nothing downstream of this authorization signal re-verifies that the matched database line actually belongs to the caller, an unprivileged attacker with a valid lxc-usernet policy entry can trigger deletion of another user's OVS port on the same bridge.
This is limited to multi-tenant environments using lxc-user-nic with OpenVSwitch bridges. The impact is denial of service - one tenant can repeatedly disconnect networking from containers run by another tenant on shared infrastructure. This is patched in version 7.0.0.
-
CVE-2026-39402
•
published on May 5, 2026
lxc is a Linux container runtime. In the setuid helper lxc-user-nic, the delete path contains a logic flaw in the find_line() function that allows an unprivileged user to delete OVS-attached network interfaces belonging to other users. When lxc-user-nic delete scans its NIC database to authorize a deletion request, the interface name comparison can set the authorization flag based on a name match alone, even when the ownership, type, and link fields in that database entry belong to a different user. The vulnerable check sits after the goto next label handling, meaning it is reachable on lines where earlier ownership checks failed or were skipped. Because nothing downstream of this authorization signal re-verifies that the matched database line actually belongs to the caller, an unprivileged attacker with a valid lxc-usernet policy entry can trigger deletion of another user's OVS port on the same bridge.
This is limited to multi-tenant environments using lxc-user-nic with OpenVSwitch bridges. The impact is denial of service - one tenant can repeatedly disconnect networking from containers run by another tenant on shared infrastructure. This is patched in version 7.0.0.
-
CVE-2026-39402
•
published on May 5, 2026
lxc is a Linux container runtime. In the setuid helper lxc-user-nic, the delete path contains a logic flaw in the find_line() function that allows an unprivileged user to delete OVS-attached network interfaces belonging to other users. When lxc-user-nic delete scans its NIC database to authorize a deletion request, the interface name comparison can set the authorization flag based on a name match alone, even when the ownership, type, and link fields in that database entry belong to a different user. The vulnerable check sits after the goto next label handling, meaning it is reachable on lines where earlier ownership checks failed or were skipped. Because nothing downstream of this authorization signal re-verifies that the matched database line actually belongs to the caller, an unprivileged attacker with a valid lxc-usernet policy entry can trigger deletion of another user's OVS port on the same bridge.
This is limited to multi-tenant environments using lxc-user-nic with OpenVSwitch bridges. The impact is denial of service - one tenant can repeatedly disconnect networking from containers run by another tenant on shared infrastructure. This is patched in version 7.0.0.
-
CVE-2026-39402
•
published on May 5, 2026
lxc is a Linux container runtime. In the setuid helper lxc-user-nic, the delete path contains a logic flaw in the find_line() function that allows an unprivileged user to delete OVS-attached network interfaces belonging to other users. When lxc-user-nic delete scans its NIC database to authorize a deletion request, the interface name comparison can set the authorization flag based on a name match alone, even when the ownership, type, and link fields in that database entry belong to a different user. The vulnerable check sits after the goto next label handling, meaning it is reachable on lines where earlier ownership checks failed or were skipped. Because nothing downstream of this authorization signal re-verifies that the matched database line actually belongs to the caller, an unprivileged attacker with a valid lxc-usernet policy entry can trigger deletion of another user's OVS port on the same bridge.
This is limited to multi-tenant environments using lxc-user-nic with OpenVSwitch bridges. The impact is denial of service - one tenant can repeatedly disconnect networking from containers run by another tenant on shared infrastructure. This is patched in version 7.0.0.
-
CVE-2026-39402
•
published on May 5, 2026
lxc is a Linux container runtime. In the setuid helper lxc-user-nic, the delete path contains a logic flaw in the find_line() function that allows an unprivileged user to delete OVS-attached network interfaces belonging to other users. When lxc-user-nic delete scans its NIC database to authorize a deletion request, the interface name comparison can set the authorization flag based on a name match alone, even when the ownership, type, and link fields in that database entry belong to a different user. The vulnerable check sits after the goto next label handling, meaning it is reachable on lines where earlier ownership checks failed or were skipped. Because nothing downstream of this authorization signal re-verifies that the matched database line actually belongs to the caller, an unprivileged attacker with a valid lxc-usernet policy entry can trigger deletion of another user's OVS port on the same bridge.
This is limited to multi-tenant environments using lxc-user-nic with OpenVSwitch bridges. The impact is denial of service - one tenant can repeatedly disconnect networking from containers run by another tenant on shared infrastructure. This is patched in version 7.0.0.
-
CVE-2026-39402
•
published on May 5, 2026
lxc is a Linux container runtime. In the setuid helper lxc-user-nic, the delete path contains a logic flaw in the find_line() function that allows an unprivileged user to delete OVS-attached network interfaces belonging to other users. When lxc-user-nic delete scans its NIC database to authorize a deletion request, the interface name comparison can set the authorization flag based on a name match alone, even when the ownership, type, and link fields in that database entry belong to a different user. The vulnerable check sits after the goto next label handling, meaning it is reachable on lines where earlier ownership checks failed or were skipped. Because nothing downstream of this authorization signal re-verifies that the matched database line actually belongs to the caller, an unprivileged attacker with a valid lxc-usernet policy entry can trigger deletion of another user's OVS port on the same bridge.
This is limited to multi-tenant environments using lxc-user-nic with OpenVSwitch bridges. The impact is denial of service - one tenant can repeatedly disconnect networking from containers run by another tenant on shared infrastructure. This is patched in version 7.0.0.
-
CVE-2026-39402
•
published on May 5, 2026
lxc is a Linux container runtime. In the setuid helper lxc-user-nic, the delete path contains a logic flaw in the find_line() function that allows an unprivileged user to delete OVS-attached network interfaces belonging to other users. When lxc-user-nic delete scans its NIC database to authorize a deletion request, the interface name comparison can set the authorization flag based on a name match alone, even when the ownership, type, and link fields in that database entry belong to a different user. The vulnerable check sits after the goto next label handling, meaning it is reachable on lines where earlier ownership checks failed or were skipped. Because nothing downstream of this authorization signal re-verifies that the matched database line actually belongs to the caller, an unprivileged attacker with a valid lxc-usernet policy entry can trigger deletion of another user's OVS port on the same bridge.
This is limited to multi-tenant environments using lxc-user-nic with OpenVSwitch bridges. The impact is denial of service - one tenant can repeatedly disconnect networking from containers run by another tenant on shared infrastructure. This is patched in version 7.0.0.
-
CVE-2026-39402
•
published on May 5, 2026
lxc is a Linux container runtime. In the setuid helper lxc-user-nic, the delete path contains a logic flaw in the find_line() function that allows an unprivileged user to delete OVS-attached network interfaces belonging to other users. When lxc-user-nic delete scans its NIC database to authorize a deletion request, the interface name comparison can set the authorization flag based on a name match alone, even when the ownership, type, and link fields in that database entry belong to a different user. The vulnerable check sits after the goto next label handling, meaning it is reachable on lines where earlier ownership checks failed or were skipped. Because nothing downstream of this authorization signal re-verifies that the matched database line actually belongs to the caller, an unprivileged attacker with a valid lxc-usernet policy entry can trigger deletion of another user's OVS port on the same bridge.
This is limited to multi-tenant environments using lxc-user-nic with OpenVSwitch bridges. The impact is denial of service - one tenant can repeatedly disconnect networking from containers run by another tenant on shared infrastructure. This is patched in version 7.0.0.
-
CVE-2026-39402
•
published on May 5, 2026
lxc is a Linux container runtime. In the setuid helper lxc-user-nic, the delete path contains a logic flaw in the find_line() function that allows an unprivileged user to delete OVS-attached network interfaces belonging to other users. When lxc-user-nic delete scans its NIC database to authorize a deletion request, the interface name comparison can set the authorization flag based on a name match alone, even when the ownership, type, and link fields in that database entry belong to a different user. The vulnerable check sits after the goto next label handling, meaning it is reachable on lines where earlier ownership checks failed or were skipped. Because nothing downstream of this authorization signal re-verifies that the matched database line actually belongs to the caller, an unprivileged attacker with a valid lxc-usernet policy entry can trigger deletion of another user's OVS port on the same bridge.
This is limited to multi-tenant environments using lxc-user-nic with OpenVSwitch bridges. The impact is denial of service - one tenant can repeatedly disconnect networking from containers run by another tenant on shared infrastructure. This is patched in version 7.0.0.
-
CVE-2026-39402
•
published on May 5, 2026
lxc is a Linux container runtime. In the setuid helper lxc-user-nic, the delete path contains a logic flaw in the find_line() function that allows an unprivileged user to delete OVS-attached network interfaces belonging to other users. When lxc-user-nic delete scans its NIC database to authorize a deletion request, the interface name comparison can set the authorization flag based on a name match alone, even when the ownership, type, and link fields in that database entry belong to a different user. The vulnerable check sits after the goto next label handling, meaning it is reachable on lines where earlier ownership checks failed or were skipped. Because nothing downstream of this authorization signal re-verifies that the matched database line actually belongs to the caller, an unprivileged attacker with a valid lxc-usernet policy entry can trigger deletion of another user's OVS port on the same bridge.
This is limited to multi-tenant environments using lxc-user-nic with OpenVSwitch bridges. The impact is denial of service - one tenant can repeatedly disconnect networking from containers run by another tenant on shared infrastructure. This is patched in version 7.0.0.
-
CVE-2026-39402
•
published on May 5, 2026
lxc is a Linux container runtime. In the setuid helper lxc-user-nic, the delete path contains a logic flaw in the find_line() function that allows an unprivileged user to delete OVS-attached network interfaces belonging to other users. When lxc-user-nic delete scans its NIC database to authorize a deletion request, the interface name comparison can set the authorization flag based on a name match alone, even when the ownership, type, and link fields in that database entry belong to a different user. The vulnerable check sits after the goto next label handling, meaning it is reachable on lines where earlier ownership checks failed or were skipped. Because nothing downstream of this authorization signal re-verifies that the matched database line actually belongs to the caller, an unprivileged attacker with a valid lxc-usernet policy entry can trigger deletion of another user's OVS port on the same bridge.
This is limited to multi-tenant environments using lxc-user-nic with OpenVSwitch bridges. The impact is denial of service - one tenant can repeatedly disconnect networking from containers run by another tenant on shared infrastructure. This is patched in version 7.0.0.
-
CVE-2026-39402
•
published on May 5, 2026
lxc is a Linux container runtime. In the setuid helper lxc-user-nic, the delete path contains a logic flaw in the find_line() function that allows an unprivileged user to delete OVS-attached network interfaces belonging to other users. When lxc-user-nic delete scans its NIC database to authorize a deletion request, the interface name comparison can set the authorization flag based on a name match alone, even when the ownership, type, and link fields in that database entry belong to a different user. The vulnerable check sits after the goto next label handling, meaning it is reachable on lines where earlier ownership checks failed or were skipped. Because nothing downstream of this authorization signal re-verifies that the matched database line actually belongs to the caller, an unprivileged attacker with a valid lxc-usernet policy entry can trigger deletion of another user's OVS port on the same bridge.
This is limited to multi-tenant environments using lxc-user-nic with OpenVSwitch bridges. The impact is denial of service - one tenant can repeatedly disconnect networking from containers run by another tenant on shared infrastructure. This is patched in version 7.0.0.
