-
CVE-2025-22101
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
net: libwx: fix Tx L4 checksum
The hardware only supports L4 checksum offload for TCP/UDP/SCTP protocol.
There was a bug to set Tx checksum flag for the other protocol that results
in Tx ring hang. Fix to compute software checksum for these packets.
-
CVE-2025-22100
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Fix race condition when gathering fdinfo group samples
Commit e16635d88fa0 ("drm/panthor: add DRM fdinfo support") failed to
protect access to groups with an xarray lock, which could lead to
use-after-free errors.
-
CVE-2025-22099
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm: xlnx: zynqmp_dpsub: Add NULL check in zynqmp_audio_init
devm_kasprintf() calls can return null pointers on failure.
But some return values were not checked in zynqmp_audio_init().
Add NULL check in zynqmp_audio_init(), avoid referencing null
pointers in the subsequent code.
-
CVE-2025-22098
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm: zynqmp_dp: Fix a deadlock in zynqmp_dp_ignore_hpd_set()
Instead of attempting the same mutex twice, lock and unlock it.
This bug has been detected by the Clang thread-safety analyzer.
-
CVE-2025-22097
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm/vkms: Fix use after free and double free on init error
If the driver initialization fails, the vkms_exit() function might
access an uninitialized or freed default_config pointer and it might
double free it.
Fix both possible errors by initializing default_config only when the
driver initialization succeeded.
-
CVE-2025-22096
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm/msm/gem: Fix error code msm_parse_deps()
The SUBMIT_ERROR() macro turns the error code negative. This extra '-'
operation turns it back to positive EINVAL again. The error code is
passed to ERR_PTR() and since positive values are not an IS_ERR() it
eventually will lead to an oops. Delete the '-'.
Patchwork: https://patchwork.freedesktop.org/patch/637625/
-
CVE-2025-22095
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
PCI: brcmstb: Fix error path after a call to regulator_bulk_get()
If the regulator_bulk_get() returns an error and no regulators
are created, we need to set their number to zero.
If we don't do this and the PCIe link up fails, a call to the
regulator_bulk_free() will result in a kernel panic.
While at it, print the error value, as we cannot return an error
upwards as the kernel will WARN() on an error from add_bus().
[kwilczynski: commit log, use comma in the message to match style with
other similar messages]
-
CVE-2025-22094
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu'
Commit 176cda0619b6 ("powerpc/perf: Add perf interface to expose vpa
counters") introduced 'vpa_pmu' to expose Book3s-HV nested APIv2 provided
L1-L2 context switch latency counters to L1 user-space via
perf-events. However the newly introduced PMU named 'vpa_pmu' doesn't
assign ownership of the PMU to the module 'vpa_pmu'. Consequently the
module 'vpa_pmu' can be unloaded while one of the perf-events are still
active, which can lead to kernel oops and panic of the form below on a
Pseries-LPAR:
BUG: Kernel NULL pointer dereference on read at 0x00000058
NIP [c000000000506cb8] event_sched_out+0x40/0x258
LR [c00000000050e8a4] __perf_remove_from_context+0x7c/0x2b0
Call Trace:
[c00000025fc3fc30] [c00000025f8457a8] 0xc00000025f8457a8 (unreliable)
[c00000025fc3fc80] [fffffffffffffee0] 0xfffffffffffffee0
[c00000025fc3fcd0] [c000000000501e70] event_function+0xa8/0x120
Kernel panic - not syncing: Aiee, killing interrupt handler!
Fix this by adding the module ownership to 'vpa_pmu' so that the module
'vpa_pmu' is ref-counted and prevented from being unloaded when perf-events
are initialized.
-
CVE-2025-22093
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: avoid NPD when ASIC does not support DMUB
ctx-dmub_srv will de NULL if the ASIC does not support DMUB, which is
tested in dm_dmub_sw_init.
However, it will be dereferenced in dmub_hw_lock_mgr_cmd if
should_use_dmub_lock returns true.
This has been the case since dmub support has been added for PSR1.
Fix this by checking for dmub_srv in should_use_dmub_lock.
[ 37.440832] BUG: kernel NULL pointer dereference, address: 0000000000000058
[ 37.447808] #PF: supervisor read access in kernel mode
[ 37.452959] #PF: error_code(0x0000) - not-present page
[ 37.458112] PGD 0 P4D 0
[ 37.460662] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 37.465553] CPU: 2 UID: 1000 PID: 1745 Comm: DrmThread Not tainted 6.14.0-rc1-00003-gd62e938120f0 #23 99720e1cb1e0fc4773b8513150932a07de3c6e88
[ 37.478324] Hardware name: Google Morphius/Morphius, BIOS Google_Morphius.13434.858.0 10/26/2023
[ 37.487103] RIP: 0010:dmub_hw_lock_mgr_cmd+0x77/0xb0
[ 37.492074] Code: 44 24 0e 00 00 00 00 48 c7 04 24 45 00 00 0c 40 88 74 24 0d 0f b6 02 88 44 24 0c 8b 01 89 44 24 08 85 f6 75 05 c6 44 24 0e 01 48> 8b 7f 58 48 89 e6 ba 01 00 00 00 e8 08 3c 2a 00 65 48 8b 04 5
[ 37.510822] RSP: 0018:ffff969442853300 EFLAGS: 00010202
[ 37.516052] RAX: 0000000000000000 RBX: ffff92db03000000 RCX: ffff969442853358
[ 37.523185] RDX: ffff969442853368 RSI: 0000000000000001 RDI: 0000000000000000
[ 37.530322] RBP: 0000000000000001 R08: 00000000000004a7 R09: 00000000000004a5
[ 37.537453] R10: 0000000000000476 R11: 0000000000000062 R12: ffff92db0ade8000
[ 37.544589] R13: ffff92da01180ae0 R14: ffff92da011802a8 R15: ffff92db03000000
[ 37.551725] FS: 0000784a9cdfc6c0(0000) GS:ffff92db2af00000(0000) knlGS:0000000000000000
[ 37.559814] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 37.565562] CR2: 0000000000000058 CR3: 0000000112b1c000 CR4: 00000000003506f0
[ 37.572697] Call Trace:
[ 37.575152]
[ 37.577258] ? __die_body+0x66/0xb0
[ 37.580756] ? page_fault_oops+0x3e7/0x4a0
[ 37.584861] ? exc_page_fault+0x3e/0xe0
[ 37.588706] ? exc_page_fault+0x5c/0xe0
[ 37.592550] ? asm_exc_page_fault+0x22/0x30
[ 37.596742] ? dmub_hw_lock_mgr_cmd+0x77/0xb0
[ 37.601107] dcn10_cursor_lock+0x1e1/0x240
[ 37.605211] program_cursor_attributes+0x81/0x190
[ 37.609923] commit_planes_for_stream+0x998/0x1ef0
[ 37.614722] update_planes_and_stream_v2+0x41e/0x5c0
[ 37.619703] dc_update_planes_and_stream+0x78/0x140
[ 37.624588] amdgpu_dm_atomic_commit_tail+0x4362/0x49f0
[ 37.629832] ? srso_return_thunk+0x5/0x5f
[ 37.633847] ? mark_held_locks+0x6d/0xd0
[ 37.637774] ? _raw_spin_unlock_irq+0x24/0x50
[ 37.642135] ? srso_return_thunk+0x5/0x5f
[ 37.646148] ? lockdep_hardirqs_on+0x95/0x150
[ 37.650510] ? srso_return_thunk+0x5/0x5f
[ 37.654522] ? _raw_spin_unlock_irq+0x2f/0x50
[ 37.658883] ? srso_return_thunk+0x5/0x5f
[ 37.662897] ? wait_for_common+0x186/0x1c0
[ 37.666998] ? srso_return_thunk+0x5/0x5f
[ 37.671009] ? drm_crtc_next_vblank_start+0xc3/0x170
[ 37.675983] commit_tail+0xf5/0x1c0
[ 37.679478] drm_atomic_helper_commit+0x2a2/0x2b0
[ 37.684186] drm_atomic_commit+0xd6/0x100
[ 37.688199] ? __cfi___drm_printfn_info+0x10/0x10
[ 37.692911] drm_atomic_helper_update_plane+0xe5/0x130
[ 37.698054] drm_mode_cursor_common+0x501/0x670
[ 37.702600] ? __cfi_drm_mode_cursor_ioctl+0x10/0x10
[ 37.707572] drm_mode_cursor_ioctl+0x48/0x70
[ 37.711851] drm_ioctl_kernel+0xf2/0x150
[ 37.715781] drm_ioctl+0x363/0x590
[ 37.719189] ? __cfi_drm_mode_cursor_ioctl+0x10/0x10
[ 37.724165] amdgpu_drm_ioctl+0x41/0x80
[ 37.728013] __se_sys_ioctl+0x7f/0xd0
[ 37.731685] do_syscall_64+0x87/0x100
[ 37.735355] ? vma_end_read+0x12/0xe0
[ 37.739024] ? srso_return_thunk+0x5/0x5f
[ 37.743041] ? find_held_lock+0x47/0xf0
[ 37.746884] ? vma_end_read+0x12/0xe0
[ 37.750552] ? srso_return_thunk+0x5/0
---truncated---
-
CVE-2025-22092
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix NULL dereference in SR-IOV VF creation error path
Clean up when virtfn setup fails to prevent NULL pointer dereference
during device removal. The kernel oops below occurred due to incorrect
error handling flow when pci_setup_device() fails.
Add pci_iov_scan_device(), which handles virtfn allocation and setup and
cleans up if pci_setup_device() fails, so pci_iov_add_virtfn() doesn't need
to call pci_stop_and_remove_bus_device(). This prevents accessing
partially initialized virtfn devices during removal.
BUG: kernel NULL pointer dereference, address: 00000000000000d0
RIP: 0010:device_del+0x3d/0x3d0
Call Trace:
pci_remove_bus_device+0x7c/0x100
pci_iov_add_virtfn+0xfa/0x200
sriov_enable+0x208/0x420
mlx5_core_sriov_configure+0x6a/0x160 [mlx5_core]
sriov_numvfs_store+0xae/0x1a0
[bhelgaas: commit log, return ERR_PTR(-ENOMEM) directly]
-
CVE-2025-22091
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix page_size variable overflow
Change all variables storing mlx5_umem_mkc_find_best_pgsz() result to
unsigned long to support values larger than 31 and avoid overflow.
For example: If we try to register 4GB of memory that is contiguous in
physical memory, the driver will optimize the page_size and try to use
an mkey with 4GB entity size. The 'unsigned int' page_size variable will
overflow to '0' and we'll hit the WARN_ON() in alloc_cacheable_mr().
WARNING: CPU: 2 PID: 1203 at drivers/infiniband/hw/mlx5/mr.c:1124 alloc_cacheable_mr+0x22/0x580 [mlx5_ib]
Modules linked in: mlx5_ib mlx5_core bonding ip6_gre ip6_tunnel tunnel6 ip_gre gre rdma_rxe rdma_ucm ib_uverbs ib_ipoib ib_umad rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm fuse ib_core [last unloaded: mlx5_core]
CPU: 2 UID: 70878 PID: 1203 Comm: rdma_resource_l Tainted: G W 6.14.0-rc4-dirty #43
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:alloc_cacheable_mr+0x22/0x580 [mlx5_ib]
Code: 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 41 52 53 48 83 ec 30 f6 46 28 04 4c 8b 77 08 75 21 0f 0b 49 c7 c2 ea ff ff ff 48 8d 65 d0 4c 89 d0 5b 41 5a 41 5c 41
RSP: 0018:ffffc900006ffac8 EFLAGS: 00010246
RAX: 0000000004c0d0d0 RBX: ffff888217a22000 RCX: 0000000000100001
RDX: 00007fb7ac480000 RSI: ffff8882037b1240 RDI: ffff8882046f0600
RBP: ffffc900006ffb28 R08: 0000000000000001 R09: 0000000000000000
R10: 00000000000007e0 R11: ffffea0008011d40 R12: ffff8882037b1240
R13: ffff8882046f0600 R14: ffff888217a22000 R15: ffffc900006ffe00
FS: 00007fb7ed013340(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb7ed1d8000 CR3: 00000001fd8f6006 CR4: 0000000000772eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
? __warn+0x81/0x130
? alloc_cacheable_mr+0x22/0x580 [mlx5_ib]
? report_bug+0xfc/0x1e0
? handle_bug+0x55/0x90
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? alloc_cacheable_mr+0x22/0x580 [mlx5_ib]
create_real_mr+0x54/0x150 [mlx5_ib]
ib_uverbs_reg_mr+0x17f/0x2a0 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xca/0x140 [ib_uverbs]
ib_uverbs_run_method+0x6d0/0x780 [ib_uverbs]
? __pfx_ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x10/0x10 [ib_uverbs]
ib_uverbs_cmd_verbs+0x19b/0x360 [ib_uverbs]
? walk_system_ram_range+0x79/0xd0
? ___pte_offset_map+0x1b/0x110
? __pte_offset_map_lock+0x80/0x100
ib_uverbs_ioctl+0xac/0x110 [ib_uverbs]
__x64_sys_ioctl+0x94/0xb0
do_syscall_64+0x50/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fb7ecf0737b
Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 2a 0f 00 f7 d8 64 89 01 48
RSP: 002b:00007ffdbe03ecc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffdbe03edb8 RCX: 00007fb7ecf0737b
RDX: 00007ffdbe03eda0 RSI: 00000000c0181b01 RDI: 0000000000000003
RBP: 00007ffdbe03ed80 R08: 00007fb7ecc84010 R09: 00007ffdbe03eed4
R10: 0000000000000009 R11: 0000000000000246 R12: 00007ffdbe03eed4
R13: 000000000000000c R14: 000000000000000c R15: 00007fb7ecc84150
-
CVE-2025-22090
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range()
If track_pfn_copy() fails, we already added the dst VMA to the maple
tree. As fork() fails, we'll cleanup the maple tree, and stumble over
the dst VMA for which we neither performed any reservation nor copied
any page tables.
Consequently untrack_pfn() will see VM_PAT and try obtaining the
PAT information from the page table -- which fails because the page
table was not copied.
The easiest fix would be to simply clear the VM_PAT flag of the dst VMA
if track_pfn_copy() fails. However, the whole thing is about "simply"
clearing the VM_PAT flag is shaky as well: if we passed track_pfn_copy()
and performed a reservation, but copying the page tables fails, we'll
simply clear the VM_PAT flag, not properly undoing the reservation ...
which is also wrong.
So let's fix it properly: set the VM_PAT flag only if the reservation
succeeded (leaving it clear initially), and undo the reservation if
anything goes wrong while copying the page tables: clearing the VM_PAT
flag after undoing the reservation.
Note that any copied page table entries will get zapped when the VMA will
get removed later, after copy_page_range() succeeded; as VM_PAT is not set
then, we won't try cleaning VM_PAT up once more and untrack_pfn() will be
happy. Note that leaving these page tables in place without a reservation
is not a problem, as we are aborting fork(); this process will never run.
A reproducer can trigger this usually at the first try:
https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/reproducers/pat_fork.c
WARNING: CPU: 26 PID: 11650 at arch/x86/mm/pat/memtype.c:983 get_pat_info+0xf6/0x110
Modules linked in: ...
CPU: 26 UID: 0 PID: 11650 Comm: repro3 Not tainted 6.12.0-rc5+ #92
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:get_pat_info+0xf6/0x110
...
Call Trace:
TASK
...
untrack_pfn+0x52/0x110
unmap_single_vma+0xa6/0xe0
unmap_vmas+0x105/0x1f0
exit_mmap+0xf6/0x460
__mmput+0x4b/0x120
copy_process+0x1bf6/0x2aa0
kernel_clone+0xab/0x440
__do_sys_clone+0x66/0x90
do_syscall_64+0x95/0x180
Likely this case was missed in:
d155df53f310 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
... and instead of undoing the reservation we simply cleared the VM_PAT flag.
Keep the documentation of these functions in include/linux/pgtable.h,
one place is more than sufficient -- we should clean that up for the other
functions like track_pfn_remap/untrack_pfn separately.
-
CVE-2025-22089
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Don't expose hw_counters outside of init net namespace
Commit 467f432a521a ("RDMA/core: Split port and device counter sysfs
attributes") accidentally almost exposed hw counters to non-init net
namespaces. It didn't expose them fully, as an attempt to read any of
those counters leads to a crash like this one:
[42021.807566] BUG: kernel NULL pointer dereference, address: 0000000000000028
[42021.814463] #PF: supervisor read access in kernel mode
[42021.819549] #PF: error_code(0x0000) - not-present page
[42021.824636] PGD 0 P4D 0
[42021.827145] Oops: 0000 [#1] SMP PTI
[42021.830598] CPU: 82 PID: 2843922 Comm: switchto-defaul Kdump: loaded Tainted: G S W I XXX
[42021.841697] Hardware name: XXX
[42021.849619] RIP: 0010:hw_stat_device_show+0x1e/0x40 [ib_core]
[42021.855362] Code: 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 49 89 d0 4c 8b 5e 20 48 8b 8f b8 04 00 00 48 81 c7 f0 fa ff ff 48 8b 41 28 48 29 ce 48 83 c6 d0 48 c1 ee 04 69 d6 ab aa aa aa 48
[42021.873931] RSP: 0018:ffff97fe90f03da0 EFLAGS: 00010287
[42021.879108] RAX: ffff9406988a8c60 RBX: ffff940e1072d438 RCX: 0000000000000000
[42021.886169] RDX: ffff94085f1aa000 RSI: ffff93c6cbbdbcb0 RDI: ffff940c7517aef0
[42021.893230] RBP: ffff97fe90f03e70 R08: ffff94085f1aa000 R09: 0000000000000000
[42021.900294] R10: ffff94085f1aa000 R11: ffffffffc0775680 R12: ffffffff87ca2530
[42021.907355] R13: ffff940651602840 R14: ffff93c6cbbdbcb0 R15: ffff94085f1aa000
[42021.914418] FS: 00007fda1a3b9700(0000) GS:ffff94453fb80000(0000) knlGS:0000000000000000
[42021.922423] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[42021.928130] CR2: 0000000000000028 CR3: 00000042dcfb8003 CR4: 00000000003726f0
[42021.935194] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[42021.942257] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[42021.949324] Call Trace:
[42021.951756]
[42021.953842] [] ? show_regs+0x64/0x70
[42021.959030] [] ? __die+0x78/0xc0
[42021.963874] [] ? page_fault_oops+0x2b5/0x3b0
[42021.969749] [] ? exc_page_fault+0x1a2/0x3c0
[42021.975549] [] ? asm_exc_page_fault+0x26/0x30
[42021.981517] [] ? __pfx_show_hw_stats+0x10/0x10 [ib_core]
[42021.988482] [] ? hw_stat_device_show+0x1e/0x40 [ib_core]
[42021.995438] [] dev_attr_show+0x1e/0x50
[42022.000803] [] sysfs_kf_seq_show+0x81/0xe0
[42022.006508] [] seq_read_iter+0xf4/0x410
[42022.011954] [] vfs_read+0x16e/0x2f0
[42022.017058] [] ksys_read+0x6e/0xe0
[42022.022073] [] do_syscall_64+0x6a/0xa0
[42022.027441] [] entry_SYSCALL_64_after_hwframe+0x78/0xe2
The problem can be reproduced using the following steps:
ip netns add foo
ip netns exec foo bash
cat /sys/class/infiniband/mlx4_0/hw_counters/*
The panic occurs because of casting the device pointer into an
ib_device pointer using container_of() in hw_stat_device_show() is
wrong and leads to a memory corruption.
However the real problem is that hw counters should never been exposed
outside of the non-init net namespace.
Fix this by saving the index of the corresponding attribute group
(it might be 1 or 2 depending on the presence of driver-specific
attributes) and zeroing the pointer to hw_counters group for compat
devices during the initialization.
With this fix applied hw_counters are not available in a non-init
net namespace:
find /sys/class/infiniband/mlx4_0/ -name hw_counters
/sys/class/infiniband/mlx4_0/ports/1/hw_counters
/sys/class/infiniband/mlx4_0/ports/2/hw_counters
/sys/class/infiniband/mlx4_0/hw_counters
ip netns add foo
ip netns exec foo bash
find /sys/class/infiniband/mlx4_0/ -name hw_counters
-
CVE-2025-22088
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Prevent use-after-free in erdma_accept_newconn()
After the erdma_cep_put(new_cep) being called, new_cep will be freed,
and the following dereference will cause a UAF problem. Fix this issue.
-
CVE-2025-22087
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix array bounds error with may_goto
may_goto uses an additional 8 bytes on the stack, which causes the
interpreters[] array to go out of bounds when calculating index by
stack_size.
1. If a BPF program is rewritten, re-evaluate the stack size. For non-JIT
cases, reject loading directly.
2. For non-JIT cases, calculating interpreters[idx] may still cause
out-of-bounds array access, and just warn about it.
3. For jit_requested cases, the execution of bpf_func also needs to be
warned. So move the definition of function __bpf_prog_ret0_warn out of
the macro definition CONFIG_BPF_JIT_ALWAYS_ON.
-
CVE-2025-22086
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix mlx5_poll_one() cur_qp update flow
When cur_qp isn't NULL, in order to avoid fetching the QP from
the radix tree again we check if the next cqe QP is identical to
the one we already have.
The bug however is that we are checking if the QP is identical by
checking the QP number inside the CQE against the QP number inside the
mlx5_ib_qp, but that's wrong since the QP number from the CQE is from
FW so it should be matched against mlx5_core_qp which is our FW QP
number.
Otherwise we could use the wrong QP when handling a CQE which could
cause the kernel trace below.
This issue is mainly noticeable over QPs 0 & 1, since for now they are
the only QPs in our driver whereas the QP number inside mlx5_ib_qp
doesn't match the QP number inside mlx5_core_qp.
BUG: kernel NULL pointer dereference, address: 0000000000000012
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP
CPU: 0 UID: 0 PID: 7927 Comm: kworker/u62:1 Not tainted 6.14.0-rc3+ #189
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
RIP: 0010:mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib]
Code: 03 00 00 8d 58 ff 21 cb 66 39 d3 74 39 48 c7 c7 3c 89 6e a0 0f b7 db e8 b7 d2 b3 e0 49 8b 86 60 03 00 00 48 c7 c7 4a 89 6e a0 0f b7 5c 98 02 e8 9f d2 b3 e0 41 0f b7 86 78 03 00 00 83 e8 01 21
RSP: 0018:ffff88810511bd60 EFLAGS: 00010046
RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88885fa1b3c0 RDI: ffffffffa06e894a
RBP: 00000000000000b0 R08: 0000000000000000 R09: ffff88810511bc10
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88810d593000
R13: ffff88810e579108 R14: ffff888105146000 R15: 00000000000000b0
FS: 0000000000000000(0000) GS:ffff88885fa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 00000001077e6001 CR4: 0000000000370eb0
Call Trace:
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib]
__ib_process_cq+0x5a/0x150 [ib_core]
ib_cq_poll_work+0x31/0x90 [ib_core]
process_one_work+0x169/0x320
worker_thread+0x288/0x3a0
? work_busy+0xb0/0xb0
kthread+0xd7/0x1f0
? kthreads_online_cpu+0x130/0x130
? kthreads_online_cpu+0x130/0x130
ret_from_fork+0x2d/0x50
? kthreads_online_cpu+0x130/0x130
ret_from_fork_asm+0x11/0x20
-
CVE-2025-22085
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix use-after-free when rename device name
Syzbot reported a slab-use-after-free with the following call trace:
==================================================================
BUG: KASAN: slab-use-after-free in nla_put+0xd3/0x150 lib/nlattr.c:1099
Read of size 5 at addr ffff888140ea1c60 by task syz.0.988/10025
CPU: 0 UID: 0 PID: 10025 Comm: syz.0.988
Not tainted 6.14.0-rc4-syzkaller-00859-gf77f12010f67 #0
Hardware name: Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
TASK
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0x16e/0x5b0 mm/kasan/report.c:521
kasan_report+0x143/0x180 mm/kasan/report.c:634
kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
__asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105
nla_put+0xd3/0x150 lib/nlattr.c:1099
nla_put_string include/net/netlink.h:1621 [inline]
fill_nldev_handle+0x16e/0x200 drivers/infiniband/core/nldev.c:265
rdma_nl_notify_event+0x561/0xef0 drivers/infiniband/core/nldev.c:2857
ib_device_notify_register+0x22/0x230 drivers/infiniband/core/device.c:1344
ib_register_device+0x1292/0x1460 drivers/infiniband/core/device.c:1460
rxe_register_device+0x233/0x350 drivers/infiniband/sw/rxe/rxe_verbs.c:1540
rxe_net_add+0x74/0xf0 drivers/infiniband/sw/rxe/rxe_net.c:550
rxe_newlink+0xde/0x1a0 drivers/infiniband/sw/rxe/rxe.c:212
nldev_newlink+0x5ea/0x680 drivers/infiniband/core/nldev.c:1795
rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
rdma_nl_rcv+0x6dd/0x9e0 drivers/infiniband/core/netlink.c:259
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x8de/0xcb0 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:709 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:724
____sys_sendmsg+0x53a/0x860 net/socket.c:2564
___sys_sendmsg net/socket.c:2618 [inline]
__sys_sendmsg+0x269/0x350 net/socket.c:2650
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f42d1b8d169
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 ...
RSP: 002b:00007f42d2960038 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f42d1da6320 RCX: 00007f42d1b8d169
RDX: 0000000000000000 RSI: 00004000000002c0 RDI: 000000000000000c
RBP: 00007f42d1c0e2a0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f42d1da6320 R15: 00007ffe399344a8
Allocated by task 10025:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__do_kmalloc_node mm/slub.c:4294 [inline]
__kmalloc_node_track_caller_noprof+0x28b/0x4c0 mm/slub.c:4313
__kmemdup_nul mm/util.c:61 [inline]
kstrdup+0x42/0x100 mm/util.c:81
kobject_set_name_vargs+0x61/0x120 lib/kobject.c:274
dev_set_name+0xd5/0x120 drivers/base/core.c:3468
assign_name drivers/infiniband/core/device.c:1202 [inline]
ib_register_device+0x178/0x1460 drivers/infiniband/core/device.c:1384
rxe_register_device+0x233/0x350 drivers/infiniband/sw/rxe/rxe_verbs.c:1540
rxe_net_add+0x74/0xf0 drivers/infiniband/sw/rxe/rxe_net.c:550
rxe_newlink+0xde/0x1a0 drivers/infiniband/sw/rxe/rxe.c:212
nldev_newlink+0x5ea/0x680 drivers/infiniband/core/nldev.c:1795
rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline]
rdma_nl_rcv+0x6dd/0x9e0 drivers/infiniband/core/netlink.c:259
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x8de/0xcb0 net
---truncated---
-
CVE-2025-22084
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
w1: fix NULL pointer dereference in probe
The w1_uart_probe() function calls w1_uart_serdev_open() (which includes
devm_serdev_device_open()) before setting the client ops via
serdev_device_set_client_ops(). This ordering can trigger a NULL pointer
dereference in the serdev controller's receive_buf handler, as it assumes
serdev-ops is valid when SERPORT_ACTIVE is set.
This is similar to the issue fixed in commit 5e700b384ec1
("platform/chrome: cros_ec_uart: properly fix race condition") where
devm_serdev_device_open() was called before fully initializing the
device.
Fix the race by ensuring client ops are set before enabling the port via
w1_uart_serdev_open().
-
CVE-2025-22083
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
vhost-scsi: Fix handling of multiple calls to vhost_scsi_set_endpoint
If vhost_scsi_set_endpoint is called multiple times without a
vhost_scsi_clear_endpoint between them, we can hit multiple bugs
found by Haoran Zhang:
1. Use-after-free when no tpgs are found:
This fixes a use after free that occurs when vhost_scsi_set_endpoint is
called more than once and calls after the first call do not find any
tpgs to add to the vs_tpg. When vhost_scsi_set_endpoint first finds
tpgs to add to the vs_tpg array match=true, so we will do:
vhost_vq_set_backend(vq, vs_tpg);
...
kfree(vs-vs_tpg);
vs->vs_tpg = vs_tpg;
If vhost_scsi_set_endpoint is called again and no tpgs are found
match=false so we skip the vhost_vq_set_backend call leaving the
pointer to the vs_tpg we then free via:
kfree(vs->vs_tpg);
vs->vs_tpg = vs_tpg;
If a scsi request is then sent we do:
vhost_scsi_handle_vq -> vhost_scsi_get_req -> vhost_vq_get_backend
which sees the vs_tpg we just did a kfree on.
2. Tpg dir removal hang:
This patch fixes an issue where we cannot remove a LIO/target layer
tpg (and structs above it like the target) dir due to the refcount
dropping to -1.
The problem is that if vhost_scsi_set_endpoint detects a tpg is already
in the vs->vs_tpg array or if the tpg has been removed so
target_depend_item fails, the undepend goto handler will do
target_undepend_item on all tpgs in the vs_tpg array dropping their
refcount to 0. At this time vs_tpg contains both the tpgs we have added
in the current vhost_scsi_set_endpoint call as well as tpgs we added in
previous calls which are also in vs->vs_tpg.
Later, when vhost_scsi_clear_endpoint runs it will do
target_undepend_item on all the tpgs in the vs->vs_tpg which will drop
their refcount to -1. Userspace will then not be able to remove the tpg
and will hang when it tries to do rmdir on the tpg dir.
3. Tpg leak:
This fixes a bug where we can leak tpgs and cause them to be
un-removable because the target name is overwritten when
vhost_scsi_set_endpoint is called multiple times but with different
target names.
The bug occurs if a user has called VHOST_SCSI_SET_ENDPOINT and setup
a vhost-scsi device to target/tpg mapping, then calls
VHOST_SCSI_SET_ENDPOINT again with a new target name that has tpgs we
haven't seen before (target1 has tpg1 but target2 has tpg2). When this
happens we don't teardown the old target tpg mapping and just overwrite
the target name and the vs->vs_tpg array. Later when we do
vhost_scsi_clear_endpoint, we are passed in either target1 or target2's
name and we will only match that target's tpgs when we loop over the
vs->vs_tpg. We will then return from the function without doing
target_undepend_item on the tpgs.
Because of all these bugs, it looks like being able to call
vhost_scsi_set_endpoint multiple times was never supported. The major
user, QEMU, already has checks to prevent this use case. So to fix the
issues, this patch prevents vhost_scsi_set_endpoint from being called
if it's already successfully added tpgs. To add, remove or change the
tpg config or target name, you must do a vhost_scsi_clear_endpoint
first.
-
CVE-2025-22082
•
published on April 16, 2025
In the Linux kernel, the following vulnerability has been resolved:
iio: backend: make sure to NULL terminate stack buffer
Make sure to NULL terminate the buffer in
iio_backend_debugfs_write_reg() before passing it to sscanf(). It is a
stack variable so we should not assume it will 0 initialized.
