-
CVE-2025-38575
•
published on April 18, 2025
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use aead_request_free to match aead_request_alloc
Use aead_request_free() instead of kfree() to properly free memory
allocated by aead_request_alloc(). This ensures sensitive crypto data
is zeroed before being freed.
-
CVE-2025-38479
•
published on April 18, 2025
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fsl-edma: free irq correctly in remove path
Add fsl_edma-txirq/errirq check to avoid below warning because no
errirq at i.MX9 platform. Otherwise there will be kernel dump:
WARNING: CPU: 0 PID: 11 at kernel/irq/devres.c:144 devm_free_irq+0x74/0x80
Modules linked in:
CPU: 0 UID: 0 PID: 11 Comm: kworker/u8:0 Not tainted 6.12.0-rc7#18
Hardware name: NXP i.MX93 11X11 EVK board (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : devm_free_irq+0x74/0x80
lr : devm_free_irq+0x48/0x80
Call trace:
devm_free_irq+0x74/0x80 (P)
devm_free_irq+0x48/0x80 (L)
fsl_edma_remove+0xc4/0xc8
platform_remove+0x28/0x44
device_remove+0x4c/0x80
-
CVE-2025-38240
•
published on April 18, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: dp: drm_err = dev_err in HPD path to avoid NULL ptr
The function mtk_dp_wait_hpd_asserted() may be called before the
`mtk_dp->drm_dev` pointer is assigned in mtk_dp_bridge_attach().
Specifically it can be called via this callpath:
- mtk_edp_wait_hpd_asserted
- [panel probe]
- dp_aux_ep_probe
Using "drm" level prints anywhere in this callpath causes a NULL
pointer dereference. Change the error message directly in
mtk_dp_wait_hpd_asserted() to dev_err() to avoid this. Also change the
error messages in mtk_dp_parse_capabilities(), which is called by
mtk_dp_wait_hpd_asserted().
While touching these prints, also add the error code to them to make
future debugging easier.
-
CVE-2025-38152
•
published on April 18, 2025
In the Linux kernel, the following vulnerability has been resolved:
remoteproc: core: Clear table_sz when rproc_shutdown
There is case as below could trigger kernel dump:
Use U-Boot to start remote processor(rproc) with resource table
published to a fixed address by rproc. After Kernel boots up,
stop the rproc, load a new firmware which doesn't have resource table
,and start rproc.
When starting rproc with a firmware not have resource table,
`memcpy(loaded_table, rproc-cached_table, rproc->table_sz)` will
trigger dump, because rproc->cache_table is set to NULL during the last
stop operation, but rproc->table_sz is still valid.
This issue is found on i.MX8MP and i.MX9.
Dump as below:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af63000
[0000000000000000] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 UID: 0 PID: 1060 Comm: sh Not tainted 6.14.0-rc7-next-20250317-dirty #38
Hardware name: NXP i.MX8MPlus EVK board (DT)
pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __pi_memcpy_generic+0x110/0x22c
lr : rproc_start+0x88/0x1e0
Call trace:
__pi_memcpy_generic+0x110/0x22c (P)
rproc_boot+0x198/0x57c
state_store+0x40/0x104
dev_attr_store+0x18/0x2c
sysfs_kf_write+0x7c/0x94
kernfs_fop_write_iter+0x120/0x1cc
vfs_write+0x240/0x378
ksys_write+0x70/0x108
__arm64_sys_write+0x1c/0x28
invoke_syscall+0x48/0x10c
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x30/0xcc
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x198/0x19c
Clear rproc->table_sz to address the issue.
-
CVE-2025-38104
•
published on April 18, 2025
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Replace Mutex with Spinlock for RLCG register access to avoid Priority Inversion in SRIOV
RLCG Register Access is a way for virtual functions to safely access GPU
registers in a virtualized environment., including TLB flushes and
register reads. When multiple threads or VFs try to access the same
registers simultaneously, it can lead to race conditions. By using the
RLCG interface, the driver can serialize access to the registers. This
means that only one thread can access the registers at a time,
preventing conflicts and ensuring that operations are performed
correctly. Additionally, when a low-priority task holds a mutex that a
high-priority task needs, ie., If a thread holding a spinlock tries to
acquire a mutex, it can lead to priority inversion. register access in
amdgpu_virt_rlcg_reg_rw especially in a fast code path is critical.
The call stack shows that the function amdgpu_virt_rlcg_reg_rw is being
called, which attempts to acquire the mutex. This function is invoked
from amdgpu_sriov_wreg, which in turn is called from
gmc_v11_0_flush_gpu_tlb.
The [ BUG: Invalid wait context ] indicates that a thread is trying to
acquire a mutex while it is in a context that does not allow it to sleep
(like holding a spinlock).
Fixes the below:
[ 253.013423] =============================
[ 253.013434] [ BUG: Invalid wait context ]
[ 253.013446] 6.12.0-amdstaging-drm-next-lol-050225 #14 Tainted: G U OE
[ 253.013464] -----------------------------
[ 253.013475] kworker/0:1/10 is trying to lock:
[ 253.013487] ffff9f30542e3cf8 (&adev-virt.rlcg_reg_lock){+.+.}-{3:3}, at: amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.013815] other info that might help us debug this:
[ 253.013827] context-{4:4}
[ 253.013835] 3 locks held by kworker/0:1/10:
[ 253.013847] #0: ffff9f3040050f58 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x3f5/0x680
[ 253.013877] #1: ffffb789c008be40 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_one_work+0x1d6/0x680
[ 253.013905] #2: ffff9f3054281838 (&adev->gmc.invalidate_lock){+.+.}-{2:2}, at: gmc_v11_0_flush_gpu_tlb+0x198/0x4f0 [amdgpu]
[ 253.014154] stack backtrace:
[ 253.014164] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Tainted: G U OE 6.12.0-amdstaging-drm-next-lol-050225 #14
[ 253.014189] Tainted: [U]=USER, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[ 253.014203] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/18/2024
[ 253.014224] Workqueue: events work_for_cpu_fn
[ 253.014241] Call Trace:
[ 253.014250] TASK>
[ 253.014260] dump_stack_lvl+0x9b/0xf0
[ 253.014275] dump_stack+0x10/0x20
[ 253.014287] __lock_acquire+0xa47/0x2810
[ 253.014303] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.014321] lock_acquire+0xd1/0x300
[ 253.014333] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.014562] ? __lock_acquire+0xa6b/0x2810
[ 253.014578] __mutex_lock+0x85/0xe20
[ 253.014591] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.014782] ? sched_clock_noinstr+0x9/0x10
[ 253.014795] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.014808] ? local_clock_noinstr+0xe/0xc0
[ 253.014822] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.015012] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.015029] mutex_lock_nested+0x1b/0x30
[ 253.015044] ? mutex_lock_nested+0x1b/0x30
[ 253.015057] amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.015249] amdgpu_sriov_wreg+0xc5/0xd0 [amdgpu]
[ 253.015435] gmc_v11_0_flush_gpu_tlb+0x44b/0x4f0 [amdgpu]
[ 253.015667] gfx_v11_0_hw_init+0x499/0x29c0 [amdgpu]
[ 253.015901] ? __pfx_smu_v13_0_update_pcie_parameters+0x10/0x10 [amdgpu]
[ 253.016159] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.016173] ? smu_hw_init+0x18d/0x300 [amdgpu]
[ 253.016403] amdgpu_device_init+0x29ad/0x36a0 [amdgpu]
[ 253.016614] amdgpu_driver_load_kms+0x1a/0xc0 [amdgpu]
[ 253.0170
---truncated---
-
CVE-2025-38049
•
published on April 18, 2025
In the Linux kernel, the following vulnerability has been resolved:
x86/resctrl: Fix allocation of cleanest CLOSID on platforms with no monitors
Commit
6eac36bb9eb0 ("x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid")
added logic that causes resctrl to search for the CLOSID with the fewest dirty
cache lines when creating a new control group, if requested by the arch code.
This depends on the values read from the llc_occupancy counters. The logic is
applicable to architectures where the CLOSID effectively forms part of the
monitoring identifier and so do not allow complete freedom to choose an unused
monitoring identifier for a given CLOSID.
This support missed that some platforms may not have these counters. This
causes a NULL pointer dereference when creating a new control group as the
array was not allocated by dom_data_init().
As this feature isn't necessary on platforms that don't have cache occupancy
monitors, add this to the check that occurs when a new control group is
allocated.
-
CVE-2025-37925
•
published on April 18, 2025
In the Linux kernel, the following vulnerability has been resolved:
jfs: reject on-disk inodes of an unsupported type
Syzbot has reported the following BUG:
kernel BUG at fs/inode.c:668!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 3 UID: 0 PID: 139 Comm: jfsCommit Not tainted 6.12.0-rc4-syzkaller-00085-g4e46774408d9 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
RIP: 0010:clear_inode+0x168/0x190
Code: 4c 89 f7 e8 ba fe e5 ff e9 61 ff ff ff 44 89 f1 80 e1 07 80 c1 03 38 c1 7c c1 4c 89 f7 e8 90 ff e5 ff eb b7
0b e8 01 5d 7f ff 90 0f 0b e8 f9 5c 7f ff 90 0f 0b e8 f1 5c 7f
RSP: 0018:ffffc900027dfae8 EFLAGS: 00010093
RAX: ffffffff82157a87 RBX: 0000000000000001 RCX: ffff888104d4b980
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffffc900027dfc90 R08: ffffffff82157977 R09: fffff520004fbf38
R10: dffffc0000000000 R11: fffff520004fbf38 R12: dffffc0000000000
R13: ffff88811315bc00 R14: ffff88811315bda8 R15: ffff88811315bb80
FS: 0000000000000000(0000) GS:ffff888135f00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005565222e0578 CR3: 0000000026ef0000 CR4: 00000000000006f0
Call Trace:
TASK
? __die_body+0x5f/0xb0
? die+0x9e/0xc0
? do_trap+0x15a/0x3a0
? clear_inode+0x168/0x190
? do_error_trap+0x1dc/0x2c0
? clear_inode+0x168/0x190
? __pfx_do_error_trap+0x10/0x10
? report_bug+0x3cd/0x500
? handle_invalid_op+0x34/0x40
? clear_inode+0x168/0x190
? exc_invalid_op+0x38/0x50
? asm_exc_invalid_op+0x1a/0x20
? clear_inode+0x57/0x190
? clear_inode+0x167/0x190
? clear_inode+0x168/0x190
? clear_inode+0x167/0x190
jfs_evict_inode+0xb5/0x440
? __pfx_jfs_evict_inode+0x10/0x10
evict+0x4ea/0x9b0
? __pfx_evict+0x10/0x10
? iput+0x713/0xa50
txUpdateMap+0x931/0xb10
? __pfx_txUpdateMap+0x10/0x10
jfs_lazycommit+0x49a/0xb80
? _raw_spin_unlock_irqrestore+0x8f/0x140
? lockdep_hardirqs_on+0x99/0x150
? __pfx_jfs_lazycommit+0x10/0x10
? __pfx_default_wake_function+0x10/0x10
? __kthread_parkme+0x169/0x1d0
? __pfx_jfs_lazycommit+0x10/0x10
kthread+0x2f2/0x390
? __pfx_jfs_lazycommit+0x10/0x10
? __pfx_kthread+0x10/0x10
ret_from_fork+0x4d/0x80
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
This happens when 'clear_inode()' makes an attempt to finalize an underlying
JFS inode of unknown type. According to JFS layout description from
https://jfs.sourceforge.net/project/pub/jfslayout.pdf, inode types from 5 to
15 are reserved for future extensions and should not be encountered on a valid
filesystem. So add an extra check for valid inode type in 'copy_from_dinode()'.
-
CVE-2025-37893
•
published on April 18, 2025
In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Fix off-by-one error in build_prologue()
Vincent reported that running BPF progs with tailcalls on LoongArch
causes kernel hard lockup. Debugging the issues shows that the JITed
image missing a jirl instruction at the end of the epilogue.
There are two passes in JIT compiling, the first pass set the flags and
the second pass generates JIT code based on those flags. With BPF progs
mixing bpf2bpf and tailcalls, build_prologue() generates N insns in the
first pass and then generates N+1 insns in the second pass. This makes
epilogue_offset off by one and we will jump to some unexpected insn and
cause lockup. Fix this by inserting a nop insn.
-
CVE-2025-37860
•
published on April 18, 2025
In the Linux kernel, the following vulnerability has been resolved:
sfc: fix NULL dereferences in ef100_process_design_param()
Since cited commit, ef100_probe_main() and hence also
ef100_check_design_params() run before efx-net_dev is created;
consequently, we cannot netif_set_tso_max_size() or _segs() at this
point.
Move those netif calls to ef100_probe_netdev(), and also replace
netif_err within the design params code with pci_err.
-
CVE-2025-37785
•
published on April 18, 2025
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix OOB read when checking dotdot dir
Mounting a corrupted filesystem with directory which contains '.' dir
entry with rec_len == block size results in out-of-bounds read (later
on, when the corrupted directory is removed).
ext4_empty_dir() assumes every ext4 directory contains at least '.'
and '..' as directory entries in the first data block. It first loads
the '.' dir entry, performs sanity checks by calling ext4_check_dir_entry()
and then uses its rec_len member to compute the location of '..' dir
entry (in ext4_next_entry). It assumes the '..' dir entry fits into the
same data block.
If the rec_len of '.' is precisely one block (4KB), it slips through the
sanity checks (it is considered the last directory entry in the data
block) and leaves "struct ext4_dir_entry_2 *de" point exactly past the
memory slot allocated to the data block. The following call to
ext4_check_dir_entry() on new value of de then dereferences this pointer
which results in out-of-bounds mem access.
Fix this by extending __ext4_check_dir_entry() to check for '.' dir
entries that reach the end of data block. Make sure to ignore the phony
dir entries for checksum (by checking name_len for non-zero).
Note: This is reported by KASAN as use-after-free in case another
structure was recently freed from the slot past the bound, but it is
really an OOB read.
This issue was found by syzkaller tool.
Call Trace:
[ 38.594108] BUG: KASAN: slab-use-after-free in __ext4_check_dir_entry+0x67e/0x710
[ 38.594649] Read of size 2 at addr ffff88802b41a004 by task syz-executor/5375
[ 38.595158]
[ 38.595288] CPU: 0 UID: 0 PID: 5375 Comm: syz-executor Not tainted 6.14.0-rc7 #1
[ 38.595298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 38.595304] Call Trace:
[ 38.595308] TASK
[ 38.595311] dump_stack_lvl+0xa7/0xd0
[ 38.595325] print_address_description.constprop.0+0x2c/0x3f0
[ 38.595339] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595349] print_report+0xaa/0x250
[ 38.595359] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595368] ? kasan_addr_to_slab+0x9/0x90
[ 38.595378] kasan_report+0xab/0xe0
[ 38.595389] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595400] __ext4_check_dir_entry+0x67e/0x710
[ 38.595410] ext4_empty_dir+0x465/0x990
[ 38.595421] ? __pfx_ext4_empty_dir+0x10/0x10
[ 38.595432] ext4_rmdir.part.0+0x29a/0xd10
[ 38.595441] ? __dquot_initialize+0x2a7/0xbf0
[ 38.595455] ? __pfx_ext4_rmdir.part.0+0x10/0x10
[ 38.595464] ? __pfx___dquot_initialize+0x10/0x10
[ 38.595478] ? down_write+0xdb/0x140
[ 38.595487] ? __pfx_down_write+0x10/0x10
[ 38.595497] ext4_rmdir+0xee/0x140
[ 38.595506] vfs_rmdir+0x209/0x670
[ 38.595517] ? lookup_one_qstr_excl+0x3b/0x190
[ 38.595529] do_rmdir+0x363/0x3c0
[ 38.595537] ? __pfx_do_rmdir+0x10/0x10
[ 38.595544] ? strncpy_from_user+0x1ff/0x2e0
[ 38.595561] __x64_sys_unlinkat+0xf0/0x130
[ 38.595570] do_syscall_64+0x5b/0x180
[ 38.595583] entry_SYSCALL_64_after_hwframe+0x76/0x7e
-
CVE-2025-2162
•
published on April 18, 2025
The MapPress Maps for WordPress plugin before 2.94.10 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup).
-
CVE-2025-1863
•
published on April 18, 2025
Insecure default settings have been found in recorder products provided by Yokogawa Electric Corporation. The default setting of the authentication function is disabled on the affected products. Therefore, when connected to a network with default settings, anyone can access all functions related to settings and operations. As a result, an attacker can illegally manipulate and configure important data such as measured values and settings.
This issue affects GX10 / GX20 / GP10 / GP20 Paperless Recorders: R5.04.01 or earlier; GM Data Acquisition System: R5.05.01 or earlier; DX1000 / DX2000 / DX1000N Paperless Recorders: R4.21 or earlier; FX1000 Paperless Recorders: R1.31 or earlier; µR10000 / µR20000 Chart Recorders: R1.51 or earlier; MW100 Data Acquisition Units: All versions; DX1000T / DX2000T Paperless Recorders: All versions; CX1000 / CX2000 Paperless Recorders: All versions.
-
CVE-2025-3783
•
published on April 18, 2025
A vulnerability classified as critical was found in SourceCodester Web-based Pharmacy Product Management System 1.0. Affected by this vulnerability is an unknown functionality of the file /add-product.php. The manipulation of the argument Avatar leads to unrestricted upload. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
-
CVE-2025-3598
•
published on April 18, 2025
The Coupon Affiliates – Affiliate Plugin for WooCommerce plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the commission_summary parameter in all versions up to, and including, .6.3.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.
-
CVE-2025-39469
•
published on April 18, 2025
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Pantherius Modal Survey allows Reflected XSS.This issue affects Modal Survey: from n/a through 2.0.2.0.1.
-
CVE-2025-39470
•
published on April 18, 2025
Path Traversal: '.../...//' vulnerability in ThimPress Ivy School allows PHP Local File Inclusion.This issue affects Ivy School: from n/a through 1.6.0.
-
CVE-2025-39471
•
published on April 18, 2025
Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Pantherius Modal Survey.This issue affects Modal Survey: from n/a through 2.0.2.0.1.
-
CVE-2025-42599
•
published on April 18, 2025
Active! mail 6 BuildInfo: 6.60.05008561 and earlier contains a stack-based buffer overflow vulnerability. Receiving a specially crafted request created and sent by a remote unauthenticated attacker may lead to arbitrary code execution and/or a denial-of-service (DoS) condition.
-
CVE-2025-2613
•
published on April 18, 2025
The Login Manager – Design Login Page, View Login Activity, Limit Login Attempts plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Custom logo and background URLs in all versions up to, and including, 2.0.5 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled.
-
CVE-2024-13650
•
published on April 18, 2025
The Piotnet Addons For Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'PAFE Before After Image Comparison Slider' widget in all versions up to, and including, 2.4.34 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
