-
CVE-2026-9327
•
published on September 10, 2026
IBM WebSphere Application Server 9.0, and 8.5 could allow an authenticated user with a low-privilege administrative role to modify security configuration. This could result in information disclosure or denial of service.
-
CVE-2026-9331
•
published on September 8, 2026
The EDD Product Catalog Feed by PixelYourSite plugin for WordPress is vulnerable to unauthorized modification of data that can lead to a denial of service due to a missing capability check on the wpeddpcf_delete_feed function in all versions up to, and including, 1.0.2. This makes it possible for authenticated attackers, with subscriber-level access and above, to delete arbitrary option values on the WordPress site. This can be leveraged to delete an option that would create an error on the site and deny service to legitimate users.
-
CVE-2026-9226
•
published on October 6, 2026
Authentication bypass in the Azure AD external login flow in Devolutions Server 2026.3.7.0 and earlier allows a remote attacker to take over a user's account via replay of a captured login-session token exposed in a redirect URL.
-
CVE-2026-9218
•
published on October 13, 2026
Insufficient input validation vulnerability in time server (NTP) setting of the listed NETGEAR models allows an attacker who is connected to the router’s local network and has the router’s administrator credentials to run unauthorized commands on the router. This vulnerability could impact the integrity of the affected router. There is no impact on confidentiality or availability of the affected router.
-
CVE-2026-9216
•
published on September 8, 2026
An insufficient input validation vulnerability in the listed NETGEAR RAX series models allows a network-adjacent attacker having network access (such as WiFi credentials) to crash the router's management UI. There is no confidentiality or integrity impact. A crash of the router's management UI does not impact the availability of the router's core services like WiFi network.
-
CVE-2026-9166
•
published on September 10, 2026
Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in GIS Informatics GisLab Laboratory Management System allows Path Traversal.
This issue affects GisLab Laboratory Management System: from 1.4.03 before 1.5.
-
CVE-2026-9163
•
published on September 10, 2026
Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in GIS Informatics GisLab Laboratory Management System allows SQL Injection.
This issue affects GisLab Laboratory Management System: from 1.4.03 before 1.5.
-
CVE-2026-9138
•
published on September 4, 2026
IBM Langflow OSS 1.0.0 through 1.11.2 Langflow could allow an authenticated attacker to write arbitrary files to the server due to improper input validation in the SaveToFileComponent. The application constructs local file paths using attacker‑controlled input without sufficient sanitization when handling requests to the /api/v1/run/{flow_id} endpoint. An attacker with low‑privileged authenticated access (such as a valid API key or user session) can supply crafted path values, including absolute paths or path traversal sequences, allowing arbitrary file writes to locations writable by the Langflow process. Successful exploitation may lead to unauthorized file creation or modification, potentially resulting in further compromise depending on the deployment environment.
-
CVE-2026-9032
•
published on October 1, 2026
Tapo C120 v1 and C200 v5
contain a NULL pointer dereference in the HTTPS onboarding connect request parser. The interface is reachable without
authentication after initial setup and does not validate that a password field
is present for certain authentication and encryption parameter combinations,
allowing a malformed request from the same local network to crash the HTTPS service
Successful exploitation may
temporarily make HTTPS management functions unavailable. Repeated malformed
requests may sustain the denial-of-service condition, and recovery may in some
cases require a device reboot.
-
CVE-2026-99999
•
published on October 15, 2026
In the Linux kernel, the following vulnerability has been resolved:
ipv4: validate checksum_start before completing checksum
If a packet with bad checksum metadata gets into the ipv4 stack,
skb_checksum_help can corrupt the network header and cause a bunch of
mischief.
This was discovered and reported by Paulos, and has been reporoduced
by others independently since.
We really shouldn't allow such packets in, but as a defence
in depth measure, let's also check before we complete the checksum.
A more complete validation at input is forthcoming, but needs more work.
-
CVE-2026-99286
•
published on November 10, 2026
In the Linux kernel, the following vulnerability has been resolved:
xen-netback: Fix XenBus connection failure cleanup
xenvif_get_stats and xenvif_get_ethtool_stats capture vif-num_queues
under rcu_read_lock. We need to unpublish vif->num_queues before
synchronize_net to ensure that readers that come afterwards will not
read a non-zero vif->num_queues and attempt to access invalid queues.
This is the same cleanup algorithm as used in backend_disconnect and
added in commit b17075d5c198 ("xen-netback: fix race condition on XenBus
disconnect").
This is XSA-531
-
CVE-2026-99285
•
published on November 10, 2026
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_byteorder: remove multi-register support
64bit byteorder conversion is broken when several registers need to be
converted because the source register array advances in steps for 4 bytes
instead of 8:
for (i = ...
src64 = nft_reg_load64(&src[i]);
~~~~~ u32 *src
nft_reg_store64(&dst64[i],
Remove the multi-register support, it has other issues as well:
Pablo points out that commit
caf3ef7468f7 ("netfilter: nf_tables: prevent OOB access in nft_byteorder_eval")
alters semantics: before the loop operated on registers, i.e.
for ( ... )
dst32[i] = htons((u16)src32[i])
.. but after the patch it will operate on bytes, which makes this
useless to convert e.g. concatenations, which store each compound
in its own register.
Multi-convert of u32 has one theoretical application:
ct mark . meta mark . tcp dport @intervalset
Because ct mark and meta mark are host byte order, use with
intervals has to convert the byteorder for ct/meta mark value
to network byte order (bigendian).
nftables emits this:
[ meta load mark = reg 1 ]
[ byteorder reg 1 = hton(reg 1, 4, 4) ]
[ ct load mark => reg 9 ]
[ byteorder reg 9 = hton(reg 9, 4, 4) ]
...
I.e. two separate calls. Theoretically it could be changed to do:
[ meta load mark => reg 1 ]
[ ct load mark => reg 9 ]
[ byteorder reg 1 = htonl(reg 1, 4, 8) ]
...
But then all it would take to change the set to
meta mark . tcp dport . ct mark
... and we'd be back to two "byteorder" calls. IOW, support to
convert a range of registers is both dysfunctional and dubious.
Simplify this: remove the feature.
Pablo Neira Ayuso points out that nftables before 1.1.0 can generate
incorrect byteorder conversions, see 9fe58952c45a,
"evaluate: skip byteorder conversion for selector smaller than 2 bytes"
in nftables.git). Affected rulesets fail to load with this change and
old userspace due to 'len != size' check.
-
CVE-2026-99283
•
published on November 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: tcp: use UNACK timeout for non-closing RST packets
Commit be0502a3f2e9 ("netfilter: conntrack: tcp: only close if RST
matches exact sequence") keeps an established conntrack entry in
ESTABLISHED when an in-window RST does not match the expected sequence
number exactly, so the endpoint can validate the RST with a challenge
ACK.
The timeout selection nevertheless uses the CLOSE timeout for every RST
packet. The bug is that timeout selection is based on the packet type,
not on the state transition result: even when RST validation keeps
new_state in ESTABLISHED, the timeout is still forced to
TCP_CONNTRACK_CLOSE.
Linux TCP independently rate limits challenge ACKs per socket. A second
non-exact RST can therefore arrive after the first challenge ACK has
restored the timeout but before the rate limit expires. The second RST
lowers the timeout to 10 seconds again while the endpoint suppresses the
second challenge ACK, allowing the conntrack entry to expire while both
TCP endpoints remain established.
Using the ESTABLISHED timeout for such RSTs would avoid this short
expiration window, but it could also retain stale entries for the
five-day default because conntrack cannot reliably match the endpoint's
exact TCP state.
Use the UNACK timeout for RST packets that leave the conntrack entry in
TCP_CONNTRACK_ESTABLISHED. Exact-match RSTs and accepted RST packet
trains still fall through to timeouts[new_state], which preserves the
CLOSE timeout when conntrack accepts the RST as closing the flow.
This avoids the aggressive 10-second expiration window for non-exact
RSTs while preserving the short timeout for RSTs that conntrack accepts
as closing the flow.
-
CVE-2026-99282
•
published on November 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_teql: fix use-after-free on lower qdisc drop
The issue: teql_master_xmit() tests the slave's ndo_start_xmit() return
value against NETDEV_TX_OK alone. A slave that consumes the skb but
returns an error code (rc NET_XMIT_MASK, e.g. NET_XMIT_DROP) is treated
as if the skb were still owned, so the loop restores skb-dev and calls
__skb_pull() on it. A VLAN slave returns the result of dev_queue_xmit()
from its ndo_start_xmit() (propagated since cbbef5e18307), and when the
lower qdisc drops the packet that value is NET_XMIT_DROP after the skb
has been freed, giving a use-after-free in teql_master_xmit().
The Fix: test for consumption with dev_xmit_complete(), which accepts
NETDEV_TX_OK and every rc < NET_XMIT_MASK, matching other callers that
need to distinguish consumed results from busy. Only NETDEV_TX_OK keeps
the packet counted in tx_packets/tx_bytes and advances the slave; a
consumed result that is neither a success nor NET_XMIT_CN ends the
attempt and is charged to tx_dropped, so lower-qdisc drops are no longer
reported as good transmits. NET_XMIT_CN is counted like success because
it can accompany acceptance of the current packet: pfifo_head_drop drops
the old head, enqueues the current skb and returns NET_XMIT_CN.
Conditions to recreate the bug:
With CONFIG_NET_SCH_TEQL,
CONFIG_VLAN_8021Q and CONFIG_DUMMY enabled, add lkrdummy0 (dummy) and
lkrvlan0 (VLAN id 37 on lkrdummy0); set a pfifo limit 0 root on lkrdummy0
and a teql0 root on lkrvlan0; bring teql0 up with an address and send one
UDP packet to it. The VLAN xmit returns NET_XMIT_DROP from the lower
qdisc while holding a freed skb.
-
CVE-2026-99280
•
published on November 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: drain session procfs readers before dropping table references
Session registration failure and connection cleanup can drop the table
reference while the per-session procfs entry is still accessible. If a
reader holds the last remaining reference, its final put calls
proc_remove() from its own callback and waits for that callback to
finish.
Remove the procfs entry before dropping the table reference in the
registration failure path. Queue sessions removed during connection
cleanup and drain their procfs readers after releasing both session
locks, then return their table references. Keep the global hash node
unhashed while a session is queued so a concurrent unregister cannot
drop the reference again.
Previous-session replacement also destroys the file table before the
session is finally freed. Detach the idr under the lock used by procfs
file counters, and report zero files after it has been detached. This
prevents a reader from accessing the idr during or after its
destruction.
-
CVE-2026-99277
•
published on November 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: hold a connection reference for each session channel
ksmbd_session_unregister() removes a session from the global and per-
connection tables before dropping the table reference. A concurrent
reference holder can keep the session and its channel list alive after
those removals.
Connection cleanup can no longer find the unpublished session to remove its
channels. Since a channel only stores a raw conn pointer, the connection
can be freed while another session reference holder is still accessing it,
for example during SMB3.1.1 binding or a procfs read.
Take a connection reference when registering a channel and release it on
insertion failure, channel removal, or final session destruction. Keep the
channels and signing keys until the session is destroyed so a response can
still be signed after the session has been unregistered.
-
CVE-2026-99275
•
published on November 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject short SESSION_SETUP responses
smb2_check_message() accepts frames shorter than struct smb2_pdu when
the SMB2 status is non-zero, before the minimum-PDU check added by
b4694f269e66d. A 64-byte STATUS_MORE_PROCESSING_REQUIRED SESSION_SETUP
response is therefore accepted even though it cannot contain the
SecurityBufferOffset and SecurityBufferLength fields.
The parser then reads those fields from stale bytes left in the reused
receive buffer by an earlier frame. With a long stale
SecurityBufferLength, decode_ntlmssp_challenge() copies up to about
64 KB from beyond the receive object and sends the data back to the
server in the NTLMv2 AUTHENTICATE target info.
Reject short MPR SESSION_SETUP responses before the short-error path,
and validate SecurityBufferOffset + SecurityBufferLength against the
received response length before decoding the challenge.
The ordering bypass is not new: the short-error early return predates
b4694f269e66d, and the unvalidated SecurityBufferLength read predates
the 2016 raw NTLMSSP split in 166cea4dc3a4, so all supported stable
trees are affected. Reproduced on 6.6.87.2; the path is unchanged on
mainline.
-
CVE-2026-99274
•
published on November 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix fiemap wild read on empty truncated response
smb3_fiemap() treats -E2BIG from SMB2_ioctl() as a truncated range blob
and loops for the next chunk. If the server reports
STATUS_BUFFER_OVERFLOW with OutputCount == 0, SMB2_ioctl() returns
-E2BIG with out_data == NULL and out_data_len == 0, and the existing
length checks accept the empty result. The loop then evaluates
next = out_data[num - 1].file_offset + ...
with num == 0, reading 16 bytes before NULL.
Reject a truncated range blob that contains no range, so the resume
offset is never computed from an empty response. Also require the last
range in a truncated blob to advance the resume offset without
overflowing, and to stay within the requested range; a malicious or
broken server could otherwise make no progress or underflow len and loop
forever. Free the previous response buffer before retrying.
Reproduced on 6.6.87.2 with a malicious SMB2 server that answers
FSCTL_QUERY_ALLOCATED_RANGES with STATUS_BUFFER_OVERFLOW and
OutputCount == 0; an FS_IOC_FIEMAP ioctl on the mount oopses in
cifs_fiemap() with CR2 = fffffffffffffff8. The code path is unchanged
on mainline.
-
CVE-2026-99261
•
published on November 3, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: correct reservation fence slots for userq per-vm BOs eviction
It fixes both the move overflow and the eviction fence add for
evicting these per-vm BOs.
-
CVE-2026-99259
•
published on November 3, 2026
In the Linux kernel, the following vulnerability has been resolved:
soc/tegra: pmc: Fix uninitialised clock rate
For legacy 32-bit Tegra devices, the warning in the
tegra_pmc_enter_suspend_mode() function is being triggered because the
early_pmc-rate variable is never configured and hence, always 0. This
issue started occurring after updating the PMC driver to create the PMC
context dynamically which causes the 'rate' to be set in the new dynamic
context, but missed updating the rate in the early PMC context.
Fix this by initialising the early_pmc->rate variable for 32-bit Tegra
devices when the rate for the PMC context is initialised.
[treding@nvidia.com: move assignment to existing #ifdef block]