-
CVE-2026-99258
•
published on November 3, 2026
In the Linux kernel, the following vulnerability has been resolved:
x86/hyperv: Avoid using per-cpu output page in hv_apicid_to_vp_index()
hv_apicid_to_vp_index() currently uses the per-cpu hypercall input
and output pages. This function is called when running in VTL2 and
when running in an SEV-SNP CoCo VM with no paravisor. In the former
case, the output page is allocated, but in the latter case it is
not, so the hypervisor stores the output VP index in memory that has
not been allocated by the guest.
Fix this by using the input page for both input and output. The
hypercall has very small input and output, so sharing the same
page for both is straightforward. An alternative fix is to
allocate the per-cpu output page when running in an SEV-SNP CoCo
guest, but this uses significantly more memory, particularly
with larger vCPUs counts.
-
CVE-2026-99255
•
published on November 3, 2026
In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: don't hide a link from cancellations
A task that exits cancels its tracked requests and waits until they are
gone. io_uring_cancel_generic() looks everywhere a request can be, and
goes to sleep if it found nothing to cancel. It is woken up each time
one of the requests of the task is completed by task work or freed.
When io-wq is done with a request that has a link, there is a time in which
the next request of the link can't be found:
io_worker_handle_work()
io_assign_current_work(worker, NULL)
io_wq_free_work(work)
io_req_find_next() // takes the link off the request
io_free_req() // task work for the task
io_assign_current_work(worker, linked)
io_run_task_work()
cond_resched()
worker-cur_work = linked
It is not pending, it is not the current work of a worker, and it is not
yet on the list that it is about to be parked on. If the pass that the
exiting task makes because of io_free_req() falls into that time, it finds
nothing and the task goes to sleep. The worker then runs the link, which
IO_WQ_BIT_EXIT doesn't prevent for bounded work. If that parks the request
nothing is completed or freed, and nobody wakes up the task. If it is the
process that exits it can't be killed any more either.
NOP, IOSQE_ASYNC | IOSQE_IO_LINK
FUTEX_WAIT, FUTEX2_PRIVATE
exit of the thread, or of the process, up to 63us later
With four of these per round 5 to 8 of 10,000 rounds hang (4 CPUs, KVM):
io_uring_cancel_generic
do_exit
Commit f8b632e89a10 ("io_uring: tighten task exit cancellations") is about
the same gap, and makes the task look again for whatever happens before
io_free_req().
Free the request once the link is the current work of the worker, or
pending. Whoever is woken up by that can find the link, until it is parked
where cancellations look as well. To do so split io_wq_free_work() in two.
-
CVE-2026-99249
•
published on November 3, 2026
In the Linux kernel, the following vulnerability has been resolved:
pid_namespace: make zap_pid_ns_processes() freezable
When the init of a pid namespace exits, zap_pid_ns_processes() waits
until all other pids in the namespace are freed. A tracer outside the
namespace that does not reap its traced zombies keeps those pids
allocated, so this wait has no upper bound, and while it lasts every
suspend attempt fails:
Freezing user space processes failed after 20.006 seconds (2 tasks refusing to freeze, wq_busy=0):
Neither wait is freezable. The first loop sleeps in do_wait(), which
returns -ERESTARTSYS on the freezer's fake signal; the loop then clears
TIF_SIGPENDING and waits again without ever freezing. The final loop
sleeps in TASK_INTERRUPTIBLE, and since nothing clears TIF_SIGPENDING
there, schedule() returns immediately after the first freeze attempt
and the task spins until the wait ends.
Sleep in TASK_INTERRUPTIBLE | TASK_FREEZABLE in do_wait(), so that the
freezer can freeze tasks waiting there directly, and in TASK_IDLE |
TASK_FREEZABLE in the final loop, like coredump_task_exit() does.
This was hit with Chromium-based browsers: crashpad ptrace-attaches the
threads of a crashed renderer, which is a pid namespace init, and does
not reap those killed during the dump.
-
CVE-2026-99247
•
published on November 3, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Do not initialize tracefs work if tracing is disabled
If trace buffer allocation fails during early boot (e.g. in
early_trace_init() - allocate_trace_buffers()), tracing_disabled is
left set to 1 and the global trace array events list remains
uninitialized.
Later during boot, tracer_init_tracefs() (invoked via fs_initcall)
queues tracerfs_init_work asynchronously without checking if tracing was
disabled. When tracer_init_tracefs_work_func() runs, it calls
event_trace_init() and init_tracer_tracefs(&global_trace, NULL)
unconditionally. This leads to __find_event_file() dereferencing an
uninitialized tr->events list, causing an early boot NULL pointer
dereference Oops:
BUG: Kernel NULL pointer dereference on read at 0x00000010
Faulting instruction address: 0xc000000000485be0
Oops: Kernel access of bad area, sig: 7 [#1]
...
NIP [c000000000485be0] __find_event_file+0x70/0x3c0
LR [c000000000448874] init_tracer_tracefs+0x274/0xc80
Call Trace:
init_tracer_tracefs+0x274/0xc80
tracer_init_tracefs_work_func+0x50/0x320
process_one_work+0x1e8/0x5c0
worker_thread+0x1dc/0x3d0
kthread+0x194/0x1b0
start_kernel_thread+0x14/0x18
Check tracing_disabled at the beginning of tracer_init_tracefs_work_func()
and return immediately if tracing is disabled or failed to initialize,
preventing the crash.
-
CVE-2026-99245
•
published on November 3, 2026
In the Linux kernel, the following vulnerability has been resolved:
KEYS: Fix key_reject_and_link() race with keyring restriction
The restrict_link check in key_reject_and_link() is done before taking
the keyring semaphore, racing with a concurrent keyring_restrict()
that installs the restriction while holding the semaphore in write
mode.
Move the check to after __key_link_lock(), so it is done under the
semaphore, matching the pattern used in __key_create_or_update().
-
CVE-2026-99244
•
published on November 3, 2026
In the Linux kernel, the following vulnerability has been resolved:
pid_namespace: prevent TIF_NOTIFY_SIGNAL from interrupting the reaper
Since commit 7fea700e04bd ("zap_pid_ns_processes: clear
TIF_NOTIFY_SIGNAL along with TIF_SIGPENDING") zap_pid_ns_processes()
clears TIF_NOTIFY_SIGNAL before every kernel_wait4() call. Otherwise
kernel_wait4() doesn't sleep and returns -ERESTARTSYS if
signal_pending() is true and the reaper busy-waits.
But clearing TIF_NOTIFY_SIGNAL doesn't fix it. It can get raised again.
For example, klp_send_signals() sets it raw against any task that hasn't
transitioned yet. And it keeps sending it until the livepatch finishes.
The sleep loop waiting for pid_allocated to drop has the same problem
and it doesn't even clear anything. So a schedule() in
TASK_INTERRUPTIBLE returns immediately.
Use a no_notify_signal guard. signal_pending() will ignore
TIF_NOTIFY_SIGNAL and the pid namespace reaper sleeps until a child
exits or free_pid() wakes it.
-
CVE-2026-99233
•
published on November 2, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing/histograms: Verify event_call identity when updating synth_event refcount
In event_hist_trigger_parse() and hist_unreg_all(), the histogram
registration and unregistration paths look up find_synth_event() using
trace_event_name(file-event_call) and adjust se->ref if a match is
found.
Because find_synth_event() only compares the event basename, registering
or removing a histogram on a non-synthetic trace event whose basename
matches a synthetic event erroneously modifies the synthetic event's
reference count. If a histogram is registered on the non-synthetic
event before the synthetic event is created and removed afterwards,
se->ref is decremented without a matching increment, allowing the
synthetic event to be freed while an active histogram action still holds
a pointer to it.
Introduce find_synth_event_call() to verify that &se->call matches
file->event_call before adjusting se->ref.
-
CVE-2026-99230
•
published on November 2, 2026
In the Linux kernel, the following vulnerability has been resolved:
io_uring/cmd: don't leave list poison in -hash_node
io_uring_cmd_del_cancelable() uses hlist_del() to take a command off
->cancelable_uring_cmd, which leaves LIST_POISON1/2 behind in
->hash_node. Requests are recycled through the request cache without
being reinitialised, and not every user of ->hash_node sets it up before
it is used:
If a vectored futex wait is woken while futex_wait_multiple_setup() is
still queueing the futexes, io_futexv_wait() doesn't add the request to
->futex_list, and leaves the completion to the task_work queued by the
wake up. io_futexv_complete() ends in __io_futex_complete(), whose
hlist_del_init() is fine for a request that is unhashed, which is how all
other users of the node leave it. If the request was a cancelable
uring_cmd in its previous life, e.g. a ublk FETCH_REQ, it writes through
LIST_POISON2:
Oops: general protection fault, probably for non-canonical address
KASAN: maybe wild-memory-access in range [0xdead000000000120-...]
RIP: 0010:io_futexv_complete+0x219/0x420
Call Trace:
tctx_task_work_run+0x804/0x950
tctx_task_work+0x71/0xa0
task_work_run+0x118/0x200
Leave the node unhashed.
-
CVE-2026-99227
•
published on November 2, 2026
In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: prevent cancel reference wrap
io_waitid packs the cancellation state into bit 31 of -refs and uses
bits 30:0 as a 31-bit reference counter:
#define IO_WAITID_CANCEL_FLAG BIT(31)
#define IO_WAITID_REF_MASK GENMASK(30, 0)
__io_waitid_cancel() marks a request canceled, then increments the low
bits of ->refs to claim completion ownership. When another path owns the
request, the increment remains even though cancellation returns false.
The request remains discoverable by cancellation, so repeated failed
attempts can wrap the 31-bit reference field to zero. A later
cancellation can claim ownership and complete the request a second time.
Use atomic_fetch_or() when setting the cancel flag and inspect the old
flag value. The first cancel attempt continues to the existing ownership
increment, preserving its wake and issuer handoff semantics. Later
attempts see the cancel flag and return without incrementing the
reference field.
This makes repeated failed cancellation attempts idempotent while
leaving the first-cancel state transitions unchanged.
-
CVE-2026-99225
•
published on November 2, 2026
In the Linux kernel, the following vulnerability has been resolved:
keys: Check the authorization payload in process keyring searches
An authorization payload and its saved credentials must remain valid
while search_process_keyrings_rcu() searches the requestor's keyrings.
The function validates the authorization key, then separately loads
payload.data[0] and unconditionally reads rka-cred. Validation does
not prevent request_key_auth_revoke() from clearing the payload.
A request-key helper can assume authority and fork a descendant that
inherits the authorization key. If the descendant misses in its own
keyrings, it falls back to the saved requestor credentials. Successful
target instantiation invalidates the authorization key without clearing
the payload. After the helper exits, UMH_WAIT_PROC returns to the
requester, which calls complete_request_key() and revokes that key.
With the descendant paused after validation, the paths can interleave
as follows:
1. The descendant enters search_process_keyrings_rcu() under RCU and
key_validate() succeeds.
2. The helper instantiates the target, invalidates the authorization
key, and exits.
3. The requester resumes from UMH_WAIT_PROC, calls
complete_request_key(), and revokes the authorization key.
request_key_auth_revoke() sets its payload pointer to NULL.
4. The descendant loads NULL and dereferences rka->cred.
This NULL dereference can oops the kernel. RCU delays payload disposal
but does not prevent the pointer from being cleared.
Load the payload with dereference_key_rcu() and require a non-NULL
result before validating the authorization key and searching its saved
credentials. A non-NULL payload and its credentials remain alive for
the caller's RCU read-side section; a cleared payload skips the fallback
search and follows the existing error selection.
KASAN report as below:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
RIP: 0010:search_process_keyrings_rcu+0x32b/0x790
-
CVE-2026-99223
•
published on November 2, 2026
In the Linux kernel, the following vulnerability has been resolved:
keys: make keyring indexes independent of kernel addresses
KEYCTL_READ returns the serial numbers in a keyring in associative-array
traversal order. The first word of the index is a public, deterministic
hash of the type pointer, domain pointer and description. An unprivileged
user can therefore insert keys with known descriptions, predict their
order for each possible KASLR slide, and recover the kernel image address.
On an x86-64 build with 16 MiB alignment, 45 user keys suffice to
distinguish the candidate slides.
Remove the addresses from the whole index, not just its first hash word.
Assign each key type and domain a nonzero 64-bit ID and hash those IDs and
the description with a once-initialized SipHash key. Use the full IDs in
the later index chunks as well. Truncating or hashing the IDs there would
lose the guarantee that distinct type/domain/description tuples have a
differing index bit.
Allocate IDs lazily since private key types need not be registered. Cache
them in the index key so tree walks and copies of an existing index do not
need to dereference a type descriptor that may have been unregistered.
Keep the 32-bit chunk layout and diff_objects() bit offsets consistent,
and retain the separate root slot for keyrings used by recursive search.
The key comparison, permissions and userspace data format are unchanged;
only the address-dependent in-memory ordering is replaced.
-
CVE-2026-99222
•
published on November 2, 2026
In the Linux kernel, the following vulnerability has been resolved:
keys: Protect the read method check against type removal
keyctl_read_key() checks key-type->read without holding key->sem.
A reference keeps the key alive, but does not pin the module containing
its type. A surviving RxRPC key can therefore be read while AF_RXRPC
is being unloaded:
KEYCTL_READ task Module unload and key GC
---------------- ------------------------
lookup_user_key()
permission / possession checks
load key->type
af_rxrpc_exit()
unregister_key_type()
GC: down_write(key->sem)
GC: retype to key_type_dead
GC: up_write(key->sem)
unregister_key_type() returns
free_module()
read saved type's read member
The final access can read freed module storage. The read invocation in
__keyctl_read_key() is already protected by key->sem, but the earlier
method check is outside that critical section.
Move the method check into __keyctl_read_key(), after key_validate() and
under its existing read hold on key->sem. The check and invocation then
use the same protected type for length queries and every read retry.
The GC cannot retype the key until the semaphore is released, and type
unregistration waits for that GC pass before the module can be freed.
Return -EOPNOTSUPP when validation succeeds and the type has no read
method. A temporary buffer may now be allocated before this result;
allocation and copying to userspace remain outside the semaphore.
-
CVE-2026-99215
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
power: supply: core: prevent unregistering a power supply while a callback runs
Once a power supply is registered, its callbacks can immediately start
firing from other contexts, such as external_power_changed() triggered by
the TCPM stack. If a power supply is unregistered while the callback is
still running, the driver data can already be freed when the callback
tries to access it, leading to a use-after-free.
This happens e.g. when the hardware bus carrying the power supply device
malfunctions (e.g. I2C is hogged down by another malfunctioning device)
immediately after the power supply is registered, and thus the core is
still processing the callbacks which were queued up when the driver
starts the removal, leading in some cases to a kernel crash, e.g.:
[ 11.645942] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000005
[ 11.646751] Mem abort info:
[ 11.647006] ESR = 0x0000000096000004
[ 11.647338] EC = 0x25: DABT (current EL), IL = 32 bits
[ 11.647806] SET = 0, FnV = 0
[ 11.648077] EA = 0, S1PTW = 0
[ 11.648356] FSC = 0x04: level 0 translation fault
[ 11.648785] Data abort info:
[ 11.649041] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 11.649524] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 11.649981] GCS = 0, Overlay = 0, DirtyBit = 0
[ 11.650390] [0000000000000005] user address but active_mm is swapper
[ 11.650955] Internal error: Oops: 0000000096000004 [#1] SMP
[ 11.651460] Modules linked in:
[ 11.651742] CPU: 1 UID: 0 PID: 144 Comm: kworker/1:2 Not tainted 7.2.0-rc6-g62a9297af2cd #1 PREEMPT
[ 11.652553] Hardware name: Flipper One rev. F0B1C2 (DT)
[ 11.653024] Workqueue: events power_supply_changed_work
[ 11.653511] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 11.654135] pc : __power_supply_is_supplied_by+0x18/0x100
[ 11.654624] lr : __power_supply_am_i_supplied+0x40/0xb8
[ 11.655098] sp : ffff80008192bb30
[ 11.655399] x29: ffff80008192bb30 x28: 0000000000000000 x27: 0000000000000000
[ 11.656049] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 11.656695] x23: ffff0000c19f4200 x22: ffffdb2232ba4ea8 x21: ffff80008192bc28
[ 11.657344] x20: ffff0000c1eef000 x19: ffff80008192bc18 x18: 00000000a0886e62
[ 11.657991] x17: 000000040044ffff x16: 04500072b5503510 x15: 0000000000000000
[ 11.658639] x14: 0000000000000000 x13: 0000000000000220 x12: 0000000000000000
[ 11.659286] x11: 0000000000000000 x10: ffff0000c1fdb2b0 x9 : ffffdb2232ba5590
[ 11.659934] x8 : 00000000e5b906e6 x7 : ffff0000c2502778 x6 : ffffdb22339793d0
[ 11.660581] x5 : ffff80008192bc18 x4 : ffff0000c19cbca0 x3 : 0000000000000000
[ 11.661228] x2 : ffff0000c1fdaf40 x1 : ffffffffffffffed x0 : ffff0000c1eef000
[ 11.661878] Call trace:
[ 11.662103] __power_supply_is_supplied_by+0x18/0x100 (P)
[ 11.662596] __power_supply_am_i_supplied+0x40/0xb8
[ 11.663040] psy_for_each_psy_cb+0x20/0x40
[ 11.663416] class_for_each_device+0x110/0x150
[ 11.663825] power_supply_am_i_supplied+0x68/0x100
[ 11.664262] bq257xx_external_power_changed+0x58/0x140
[ 11.664733] __power_supply_changed_work+0x60/0x80
[ 11.665170] psy_for_each_psy_cb+0x20/0x40
[ 11.665545] class_for_each_device+0x110/0x150
[ 11.665953] power_supply_changed_work+0x98/0x1b8
[ 11.666382] process_one_work+0x164/0x4c0
[ 11.666758] worker_thread+0x19c/0x320
[ 11.667104] kthread+0x138/0x150
[ 11.667408] ret_from_fork+0x10/0x20
[ 11.667744] Code: d503233f a9bd7bfd 910003fd a90153f3 (f9400c34)
[ 11.668294] ---[ end trace 0000000000000000 ]---
Add a read-write semaphore between external_power_changed() and
power_supply_unregister() to prevent the latter from returning (and thus
the driver from freeing its data) while the callback is still running.
-
CVE-2026-99210
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: clear rdev on device init failure
rocket_probe() stores the return value from rocket_device_init() in the
file-scoped rdev pointer before checking whether it is an error pointer.
If rocket_device_init() fails, rdev is left as an ERR_PTR.
The rdev pointer is also used as the marker for whether the shared rocket
device has already been initialized. A later core probe can therefore see
a non-NULL rdev, skip rocket_device_init(), and dereference the error
pointer when reading rdev-num_cores.
Save the error code and clear rdev before returning from the
rocket_device_init() failure path.
-
CVE-2026-99206
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Fix race in discovery auth updates
Separate configfs opens can concurrently update the discovery AuthMethod
parameter. Both callers may free the same value in
iscsi_update_param_value(), causing a double-free.
Protect the lookup and replacement with the discovery TPG access lock,
as used by the other TPG configfs parameter updates.
-
CVE-2026-99205
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
sched/core: Call wakeup_preempt() for queued tasks during class change
Paul reported recent RCU changes exposed a lost resched where CPU idles
with a rcutorture thread waiting while being completely runnable.
Dumping the rq state at the time of idling with runnable tasks showed
the following:
rq-next_class = &fair_sched_class
rq->nr_running = 1
rq->cfs.h_nr_queued = 0
rq->rt.rt_nr_running = 1
Although the waiting task was an RT task, "rq->next_class" did not point
to rt_sched_class and was stuck at the lower priority fair_sched_class.
Inspecting sched_change_end() revealed the following race with
__sched_setscheduler() for queued, but non-running tasks:
CPU0 CPU1
==== ====
__schedule()
/*
* rq->donor is a fair task that blocks.
* rq->next_class = &fair_sched_class
*/
rq_lock(rq0)
pick_next_task()
/* nr_running = 0 */
pick_task_fair()
sched_balance_newidle()
raw_spin_rq_unlock(rq0)
rq_lock(rq0)
activate_task(rq0, p)
/* p is a fair task */
rq0->nr_running++;
rq0->cfs.h_nr_queued++;
wakeup_preempt(rq, p)
rq->next_class = &fair_sched_class
resched_curr()
rq_unlock(rq0)
__sched_setscheduler(p)
/* p is moved to SCHED_RR */
task_rq_lock(p)
sched_change_begin()
rq0->cfs.h_nr_queued--;
rq0->rt.rt_nr_running++;
sched_change_end()
/*
* p->on_rq = 1 (ctx->queued)
* but p is not rq->donor
* (!ctx->running) hence
* resched_curr() is and
* rq->next_class upgrade is
* skipped.
*/
task_rq_unlock()
raw_spin_rq_lock(rq0)
/*
* rq->nr_running = 1
* rq->cfs.h_nr_queued = 0
* rq->rt.rt_nr_running = 1
* rq->next_class = &fair_sched_class
*/
if (rq->cfs.h_nr_queued && ...)
/* Above is false */
if (rq_modified_above(this_rq, &fair_sched_class))
/* Also false since rq->next_class is still fair */
/*
* sched_balance_newidle() is considered to
* have failed to pull any fair tasks and no
* other wakeups were detected.
*/
return NULL; /* pick_task_fair() */
pick_task_idle()
return rq->idle;
next = rq->idle;
/* Preemption indicators are lost */
clear_tsk_need_resched(prev);
clear_preempt_need_resched();
rq->curr = rq->idle;
!!! rq->idle switches in with rq->running == 1 but !need_resched() !!!
In simple words, enqueue, followed by a class change of the newly queued
task goes unnoticed in rq->next_class indicator and
sched_balance_newidle() sees no fair task, nor any higher priority task
enqueued.
The above sequence will lead to CPU idling with a runnable task on the
CPU.
Call wakeup_preempt() for ctx->queued cases in sched_change_end() to
re-evaluate rq->next_class after class change (ENQUEUE_CLASS) and set
the NEED_RESCHED indicator accordingly.
Newidle balance will correctly see an enqueue of a higher priority
t
---truncated---
-
CVE-2026-99202
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
scsi: libsas: Fix SMP IO deadlock during HA resume
smp_execute_task_sg() calls pm_runtime_get_sync() on the host before
issuing an SMP command. When that command is itself issued from the HA
resume path, the get_sync() deadlocks: it waits for the ongoing resume
(the device is RPM_RESUMING), while the resume is blocked in
sas_drain_work() waiting for that same SMP IO to complete.
The deadlock needs an expander-attached SATA disk. During
sas_resume_ha() - sas_drain_work(), DISCE_RESUME -> sas_resume_sata()
-> ata_sas_port_resume() requests ATA_EH_RESET, and the hard reset for
such a disk is done via SMP PHY CONTROL (sas_ata_hard_reset() ->
sas_phy_reset() -> sas_smp_phy_control() ->
smp_execute_task_sg()). Direct-attached SATA resets through
lldd_control_phy() and SSP devices use TMFs, so neither hits this.
Replace the get_sync()/put_sync() pair with
pm_runtime_get_noresume()/pm_runtime_put(). smp_execute_task_sg() only
needs to hold off autosuspend while the SMP is in flight, and it must
not try to resume the host: a sync resume issued from the HA resume path
itself is what deadlocks, and by the time sas_resume_ha() runs, hw_init
has already reinitialized the hardware, so the device is accessible
without one.
The usage reference is still required. Discovery work normally runs
inside an event worker's PM reference, taken at sas_notify_port_event()
notify time and held until the handler has flushed the disco
queue. sas_rediscover_ex_phy() however requeues DISCE_REVALIDATE_DOMAIN
from within the revalidation worker itself, and flush_workqueue() does
not wait for work items queued during execution, so that chained
revalidation runs with no outer PM reference - without the
get_noresume(), its SMP could race autosuspend.
For the BSG path, sas_smp_handler() is the only caller which may find
the host autosuspended: expander SMP requests do not go through any SCSI
device request queue, so nothing else in that path holds the host
awake. Resume it there with pm_runtime_resume_and_get() and check the
result.
-
CVE-2026-99197
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: mv643xx: move setting of netops to fix crash
mv643xx_eth_probe() connects the PHY before dev-netdev_ops is
assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads
dev->netdev_ops through netdev_need_ops_lock() since the commit in
question, so probing crashes with a NULL pointer dereference when
CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash").
-
CVE-2026-99196
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: au1000: move setting of netops to fix crash
au1000_probe() calls au1000_mii_probe(), which connects the PHY,
before dev-netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash").
-
CVE-2026-99195
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: ethoc: move setting of netops to fix crash
ethoc_probe() calls ethoc_mdio_probe(), which connects the PHY,
before netdev-netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash").