-
CVE-2026-99120
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Cope with the SS bit being set in #NPF exit codes
When running Hyper-V from Windows 11, KVM is seeing the SS bit set
in nested page fault error codes produced for shadowed NPT. The AMD
manual is unclear about when SS is set, including whether it can be set
when SupervisorShadowStackEn (bit 6) is not set in the MISC_CTL field
of the VMCB.
Nevertheless, the unexpected SS bit causes out of bounds accesses in
permission_fault(), seen as either WARNs or UBSAN reports:
kernel: UBSAN: array-index-out-of-bounds in arch/x86/kvm/mmu.h:225:27
kernel: index 34 is out of range for type 'u16 [16]'
(in this case, the page fault error code is 34*2=0x44, i.e. SS|U; the
report shows SS|U|W happening as well). Fix the handling of unknown
error codes by dropping SS and (with a WARN) any bits not among those
that permission_fault() expects to receive.
At the same time, given the uncertainty about when hardware sets SS,
follow the processor's behavior when constructing the fault's error
code, and preserve the SS bit as passed to FNAME(walk_addr_generic).
While the behavior is surprising, there's a possibility that Hyper-V
expects it (Hyper-V does not even enable CET unless it finds MBEC/GMET!),
so retain the information when reflecting the fault to L1 instead of
unconditionally discarding it.
Bisection shows that this started happening with commit 687ee95c1b6d ("KVM:
nSVM: enable GMET for guests"), even though SHSTK was available to guests
since Linux 6.18. However, this is not because bit 1 of MISC_CTL (GMET)
somehow enables reporting the SS bit; rather, it's simply that Hyper-V
never uses CET unless GMET is also present. The WARN is reproducible
even with gmet=0, with some hacking of kvm-unit-tests's cet.c testcase
to ensure that the first access to the shadow stack triggers a page fault.
-
CVE-2026-99119
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: actually validate userq BOs
This was supposed to loop over the individual evicted list, as the
kernel and always_valid evicted lists were already handled in
amdgpu_vm_validate.
Without this, BOs that were created and evicted before a userq was made
would never end up in an eviction fence rearm.
Also add the missing ref to the BO before drm_exec locks and refs it.
(cherry picked from commit 18decfc9e8cc0fa70b6de9944cc27a37729edfbd)
-
CVE-2026-99117
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: don't truncate the port group walk on teardown
__br_multicast_disable_port_ctx() and br_multicast_del_port() walk
port-mglist with hlist_for_each_entry_safe(). However,
br_multicast_find_del_pg() can also delete other entries from the same
list through br_multicast_fwd_src_remove() or __fwd_del_star_excl().
If such an entry is the iterator's saved next node, hlist_del_init()
clears its ->next and terminates the walk early. The reproducer triggers
this in both teardown walks, leaving port groups in the bridge mdb with
a dangling ->key.port after del_nbp() frees the port:
BUG: KASAN: slab-use-after-free in __mdb_fill_info+0x1191/0x1320
__mdb_fill_info+0x1191/0x1320
br_mdb_dump+0x594/0xe40
rtnl_mdb_dump+0x1cf/0x5d0
Use hlist_del_init_rcu() to unlink the group while preserving ->next.
br_multicast_del_pg() and the teardown walks run under
br->multicast_lock. The GC worker must acquire the same lock before
detaching the group for destruction, so the node remains alive while
the walk uses the preserved pointer.
Preserving ->next means a walk can now reach a group that an earlier
iteration already deleted as a side effect. That group is off mp->ports,
so br_multicast_find_del_pg() would fall through its port scan and hit
the trailing WARN_ON(1). Skip such groups at the top of that helper: a
port group is put on port->mglist when it is created and only unlinked
when it is deleted, so hlist_unhashed() identifies exactly this case.
-
CVE-2026-99112
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flower: validate mask pointer after nla_next()
fl_set_enc_opt() iterates the key's nested tunnel-option attributes
with nla_for_each_attr() while advancing a single mask pointer via
nla_next() at the bottom of each loop, so the mask cursor is driven
by the number of key attributes rather than by the mask's own
attributes. The nla_ok() added by commit c96adff956191 ("cls_flower:
call nla_ok() before nla_next()") only validates the mask pointer
that was just consumed; the pointer produced by nla_next() is used by
the next iteration (fl_set_geneve_opt() and siblings) without any
validation.
The mask's nested attributes are validated with NL_VALIDATE_LIBERAL,
which merely warns on trailing bytes that do not form a complete
attribute. A mask carrying one valid attribute plus 1-3 residue
bytes (or a non-aligned attribute length making msk_depth negative)
therefore reaches the next iteration with msk_depth != 0, so neither
the !msk_depth check in fl_set_enc_opt() nor the !depth check in the
per-type helpers fires. nla_type() then reads past the mask payload
and nla_parse_nested_deprecated() iterates with an nla_len taken
from those bytes, reading well beyond the mask attribute (KASAN:
slab-out-of-bounds read in __nla_validate_parse from fl_change()).
Validate the advanced mask pointer as well: when the mask is not
legitimately exhausted (msk_depth != 0) and the new pointer fails
nla_ok(), reject the filter with -EINVAL. An exactly exhausted mask
still skips the check, preserving exact-match behaviour for the
remaining key attributes.
-
CVE-2026-99111
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix data corruption with concurrent writes and O_TRUNC
cifs_do_truncate() flushes dirty pages with filemap_write_and_wait()
and truncates the file on the server, but in the old code both
operations ran without holding i_rwsem or invalidate_lock. A
concurrent buffered write via netfs_perform_write() -- which only
needs i_rwsem shared -- could dirty new pages after the flush but
before the local truncation, and those pages would be silently
discarded by cifs_setsize() - truncate_pagecache().
Fix by acquiring inode_lock (exclusive i_rwsem) and
filemap_invalidate_lock at the top of cifs_do_truncate(), so the
entire flush-truncate-resize sequence is atomic with respect to:
- buffered writes (blocked by exclusive i_rwsem, since
netfs_start_io_write takes i_rwsem shared),
- read page faults (blocked by exclusive invalidate_lock, since
filemap_fault takes it shared),
- writeback collection (blocked by netfs_wb_begin/netfs_wb_end
around the server truncate and local resize, since
netfs_writepages also acquires the wb lock).
-
CVE-2026-99107
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix incorrect MFT record pointer passed to ntfs_attr_record_resize
ntfs_new_attr_flags() passes the wrong MFT record to ntfs_attr_record_resize().
When the attribute is in an extent record, ctx-mrec points to the extent
but the function receives the base record pointer m, causing incorrect
size calculations in memmove.
Fix by passing ctx->mrec (the actual MFT record containing the attribute)
instead of m (the base MFT record) to ntfs_attr_record_resize().
-
CVE-2026-99106
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: free the userptr ranges when a CS fails after parser_bos
amdgpu_cs_parser_bos() allocates an HMM range for every userptr entry of
the BO list and looks up the user pages. Those ranges are only freed when
amdgpu_cs_parser_bos() itself fails or when amdgpu_cs_submit() checks
them under the notifier lock. If amdgpu_cs_patch_jobs(),
amdgpu_cs_vm_handling(), amdgpu_cs_sync_rings() or the early part of
amdgpu_cs_submit() fails, nothing frees them: neither
amdgpu_cs_parser_fini() nor amdgpu_bo_list_free() touch e-range.
Each such CS then leaks the range, its hmm_pfns array (8 bytes per page
of the userptr BO) and the BO reference the range holds. An IB on a ring
that patches the CS in place (e.g. VCN) with an unmapped va_start fails
in amdgpu_cs_patch_ibs() and takes this path.
Free the ranges on those error paths. Ranges amdgpu_cs_submit() already
dropped are NULL, so freeing them again is a no-op.
(cherry picked from commit c52a9542ed7cfd527feb938bd0accada2ac8d267)
-
CVE-2026-99100
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: validate firmware record lengths
The p54 firmware parser accesses component ID and component version
records without checking that their lengths cover the fields being read.
A malformed record can therefore make the parser read past the record.
Validate the component ID and component version record lengths before
accessing their data. The descriptor record is also checked against the
shortest descriptor length found in the supported firmware images.
Reject descriptor values that underflow the RX offset or produce an empty
RX range before updating the driver state.
-
CVE-2026-9071
•
published on June 22, 2026
IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources.
-
CVE-2026-9051
•
published on May 29, 2026
There is an authentication bypass vulnerability in the NI SystemLink Enterprise Dashboard application that may allow an unauthenticated remote attacker to bypass authentication controls leading to privilege escalation or information disclosure. Successful exploitation requires an attacker to send a specially crafted HTTP request. This vulnerability affects NI SystemLink Enterprise 2026-04 and prior versions.
-
CVE-2026-9050
•
published on June 1, 2026
The Slider Revolution plugin for WordPress in versions 6.0.0-6.7.55 and 7.0.0-7.0.14 is vulnerable to unauthorized modification of data. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with Contributor-level access and above, to deactivate any active plugin installed on the site.
-
CVE-2026-9048
•
published on June 1, 2026
The Slider Revolution plugin for WordPress is vulnerable to Sensitive Information Exposure in versions 7.0.0 - 7.0.14, via the 'slider.get.full' AJAX Action. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract sensitive data including raw social media API credentials: the Instagram OAuth token, Flickr API key, YouTube Data API key, and Facebook App ID, stored in any configured slider's settings.
-
CVE-2026-9047
•
published on May 22, 2026
Improper handling of factor key state in the multi-factor authentication management feature in Devolutions Server allows an attacker with knowledge of a user's password to bypass the user's multi-factor authentication after the user reconfigures their factors.
This issue affects :
* Devolutions Server 2026.1.6.0 through 2026.1.16.0
-
CVE-2026-9040
•
published on September 8, 2026
A race condition vulnerability in Arm Ltd Bifrost GPU Kernel Driver, Arm Ltd Valhall GPU Kernel Driver, Arm Ltd Arm 5th Gen GPU Architecture Kernel Driver allows a local non-privileged user process to perform improper GPU memory processing operations to cause a denial of service or disclose sensitive information.
This issue affects Bifrost GPU Kernel Driver: from r12p0 through r49p5, from r50p0 through r51p0, from r54p1 through r54p2; Valhall GPU Kernel Driver: from r19p0 through r49p5, from r50p0 through r54p3, r55p0; Arm 5th Gen GPU Architecture Kernel Driver: from r41p0 through r49p5, from r50p0 through r54p3, r55p0.
-
CVE-2026-9039
•
published on May 28, 2026
A configuration weakness in the device’s remote management service allows an authenticated session to be established over a communication channel intended solely for vehicle-charger signaling. The service is accessible on interfaces exposed through the charging connector, and it accepts a default administrative credential. A malicious device physically connected to the charging interface could leverage this misconfiguration to obtain full administrative access.
-
CVE-2026-9036
•
published on September 3, 2026
IBM Netezza Software 11.3.0.3 through Interim Fix 002 does not validate or improperly validates TLS certificate validation, which could allow an attacker to obtain sensitive information using man in the middle techniques.
-
CVE-2026-9033
•
published on August 20, 2026
An unauthenticated attacker with network access to the captive portal service of an affected device can terminate active captive portal sessions, including forcing logout of specific users or clearing all active sessions. Affected users must re-authenticate to regain access.
Successful exploitation may allow termination of individual or all active captive portal sessions, causing temporary service disruption and requiring users to re-authenticate.
-
CVE-2026-9030
•
published on August 7, 2026
A denial-of-service
vulnerability exists in httpd service on Archer A6 v4 where the asynchronous systool
instruction handlng path in httpd does not properly synchronize or safely manage
concurrent systool operations.
By sending
crafted systool instructions through the asynchronous request path, successful
exploitation may cause the httpd process or device management service to crash
and may result in temporary loss of access to the web management interface or
device reboot.
-
CVE-2026-9013
•
published on June 19, 2026
The Bogo plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.9.1 via the bogo_rest_create_post_translation. This makes it possible for authenticated attackers, with subscriber-level access and above, to extract the raw title, content, excerpt, and password of any private, draft, or password-protected post by triggering its duplication via the translation endpoint and reading the returned title.raw, content.raw, and excerpt.raw fields of the duplicated post. This vulnerability is exploitable against posts written in a non-default locale, as authenticated subscribers can request a translation into the site's default locale to pass the locale-only permission gate. While subscribers can trigger the endpoint, this is only impactful at the Contributor-level as they can actually read the duplicated content.
-
CVE-2026-9011
•
published on May 22, 2026
The Ditty – Responsive News Tickers, Sliders, and Lists plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 3.1.65. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to retrieve the full item content of non-public Dittys — including drafts, pending, scheduled, and disabled entries — by enumerating integer post IDs against the ditty_init AJAX endpoint. Unlike the non-AJAX init() counterpart, init_ajax() does not verify that the requested Ditty has a 'publish' post status before loading and returning its items, allowing content that administrators explicitly withheld from public view to be extracted.