-
CVE-2026-9009
•
published on May 28, 2026
The Crawlomatic Multipage Scraper Post Generator plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 2.7.2 via the filter_content function. This is due to passing the attacker-supplied 'callback_raw' shortcode attribute directly into call_user_func() with no sanitization or allowlist validation, relying solely on an is_callable() check that permits dangerous PHP built-ins such as system, shell_exec, exec, passthru, and assert. This makes it possible for authenticated attackers, with author-level access and above, to execute code on the server. An identical sink exists for the 'callback' attribute, providing a second independent vector through the same shortcode.
-
CVE-2026-9004
•
published on September 22, 2026
The WP-CRM System – Manage Clients and Projects plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.4.6 via the 'contact_id' parameter. This makes it possible for authenticated attackers, with contributor-level access and above, to extract full names, email addresses, phone numbers, mobile numbers, fax numbers, and physical address information of arbitrary CRM contact records by enumerating the contact_id parameter.
-
CVE-2026-99284
•
published on November 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: propagate shared-frag marker in skb_zerocopy()
skb_zerocopy() moves frag descriptors from @from into @to and takes a
reference on each frag, but it does not copy skb_shinfo(from)-flags into
skb_shinfo(to)->flags. A destination skb holding the same page-cache
backed frags as the source therefore reports skb_has_shared_frag() as
false.
That breaks the invariant relied on by later in-place writers. ESP input
checks skb_has_shared_frag() before deciding whether an uncloned
nonlinear skb can skip skb_cow_data(); with the marker lost, an skb that
skb_zerocopy() built for nfnetlink_queue or for an openvswitch upcall is
decrypted in place, letting an unprivileged user write into the page
cache of a root-owned read-only file.
Propagate SKBFL_SHARED_FRAG when frag descriptors are copied, as done for
the other frag-transfer helpers.
-
CVE-2026-99281
•
published on November 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
tun: Require CAP_NET_ADMIN to attach to an ownerless device
Twenty years ago I made creating a tuntap device require CAP_NET_ADMIN
in commit ca6bb5d7ab22 ("[NET]: Require CAP_NET_ADMIN to create tuntap
devices.")
The idea was to allow the permissions on /dev/net/tun to be relaxed to
0666 and thus allow owners of tun devices assigned with TUNSETOWNER to
actually open it and get at their devices.
What we missed at the time was that persistent devices with *no* owner
were already essentially world-consumable, and anyone who could open
the device node could also attach to those.
Even then, using persistent devices with no explicitly set owner — on
the (false) presumption that CAP_NET_ADMIN would be required to open
them — wasn't an egregious userspace bug. There are cases where it does
make sense to separate the creation/configuration of the netdevice, from
the process which shovels packets into it.
Since then, TUNSETGROUP was added a year later in commit 8c644623fe7e
("[NET]: Allow group ownership of TUN/TAP devices."). Its commit message
noted that if both uid and gid are set, both have to match (in itself a
bizarre choice) — but still not that with *neither* set, no permission
at all was required.
Then in 2012 commit c8d68e6be1c3 ("tuntap: multiqueue support") allowed
new queues to be attached to a device from the moment of its creation,
with no way for userspace to close the race between creation and a
subsequent TUNSET{OWNER,GROUP}.
In 2024, commit 3ca459eaba1bf ("tun: fix group permission check") tried
to fix things to be saner: only require the user *or* the group to
match, in line with standard POSIX permissions, and require
CAP_NET_ADMIN if neither the user nor group authorised the access
(although it put the CAP_NET_ADMIN check first, and would wrongly have
reported the capability as having been used even when it was not).
That fix was reverted in commit a70c7b3cbc06 ("tun: revert fix group
permission check") due to allegedly causing a regression in an selinux
test suite which *expected* the attachment to succeed when authorised
by none of user, group, nor CAP_NET_ADMIN:
https://lore.kernel.org/netdev/CAFqZXNtkCBT4f+PwyVRmQGoT3p1eVa01fCG_aNtpt6dakXncUg@mail.gmail.com/
We should not break UAPI. But we don't have to consider an selinux test
case which deliberately exercises a security flaw to be UAPI worth
preserving either. To which end, I have fixed it in selinux-testsuite
commit b2f894f0016b ("tests/tun_tap: set an owner on the device for the
relabel tests").
So: fix the lack of CAP_NET_ADMIN check on devices which *haven't* been
assigned an owner or group, while leaving the weird tun ownership model
as it was (user *and* group have to match, if both are set). If someone
still wants to fix the latter (which wasn't actually the reason the
previous attempt was reverted), they can do it under separate cover.
Permit attaching to an existing device only if an owner and/or group was
set and the caller matches all that were set, or if the caller has
CAP_NET_ADMIN. The only behavioural change is that a device with no
owner or group now requires CAP_NET_ADMIN to attach — precisely the
loophole we want to close.
And put the CAP_NET_ADMIN check in the right place this time.
-
CVE-2026-99279
•
published on November 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reclaim ended sessions on logoff and expiration
LOGOFF and previous-session replacement leave sessions Expired with a
zero credential expiry. Ended sessions can retain their memory and
connection slots when no further setup arrives on the owning connection.
Unpublish a logged-off session while the request reference keeps its
response signing and encryption keys alive. Remove its procfs entry
before dropping the table reference so a reader cannot remove its own
entry on the last put. Clear proc_entry after removal to avoid removing
it twice.
Reclaim ended sessions from the global table in the existing expiration
worker before it acquires conn_list_lock. Only select Expired sessions
with zero credential expiry and no references beyond the table
reference. Keep sessions whose Kerberos credentials expired available
for reauthentication.
Unlink the session from its setup connection and all channel
connections, so SMB2 sessions and sessions with only secondary SMB3
channels are covered. The session already holds connection references,
and sessions_table_lock prevents concurrent channel removal. Queue
sessions on a separate disposal list, leaving their hash nodes unhashed,
and remove procfs entries and drop table references outside the locks.
Keep the pending setup check before allocating a new session so
abandoned InProgress sessions can release their slots even at the
connection limit. Retain the timeout and reference checks and dispose of
those sessions outside the locks. Leave ended Expired sessions to the
expiration worker.
-
CVE-2026-99278
•
published on November 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: limit sessions on each connection
The pending setup limit only counts InProgress sessions. A client can
complete authentication repeatedly and retain an unbounded number of Valid
sessions on one connection.
Reserve a connection slot before allocating a session and retain a
connection reference while authentication is in progress. The first SMB3
channel takes over that reservation; binding to another connection reserves
one slot there. Reauthentication and authentication continuation reuse the
existing reservation. Return slots on allocation or insertion failure,
channel removal, and final session destruction.
Accept max_sessions_per_connection in reserved startup-request space and
default to 64 when older tools leave it zero. Keep the request size and
existing field offsets unchanged. Expose the configured limit in procfs.
The existing connection limits bound the aggregate number of sessions
without a separate global session allocation limit.
-
CVE-2026-99276
•
published on November 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: defer connection scavenging while session locks are busy
The expiration worker holds conn_list_lock for reading while checking
for authenticated sessions. Without this change, the check can wait for
conn-session_lock or sessions_table_lock.
In destroy_previous_session(), the status updates after
ksmbd_conn_wait_idle_sess() run with both session locks held for
writing. Both the KSMBD_SESS_GOOD error path and the
KSMBD_SESS_NEED_SETUP success path call ksmbd_all_conn_set_status(),
which takes conn_list_lock for reading.
A writer queued on conn_list_lock can block these new read acquisitions.
The worker then waits for a session lock held by
destroy_previous_session(), which waits behind the writer. The writer
cannot proceed until the worker releases conn_list_lock.
Try both session locks instead of waiting in the scavenging check. Keep
the connection when either lock is busy and let the periodic worker
retry later.
-
CVE-2026-99257
•
published on November 3, 2026
In the Linux kernel, the following vulnerability has been resolved:
gpio: shared: gracefully handle no-device lookup of shared GPIOs
We use platform lookup tables for shared GPIOs. This mechanism needs a
struct device to work so fwnode-based lookup with no device associated
currently causes a NULL-pointer deference.
Adding this functionality will require a larger rework and it has never
worked anyway so add a check that allows the kernel to gracefully handle
this situation with an error ahead of implementing that functionality as
a new feature.
-
CVE-2026-99251
•
published on November 3, 2026
In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: Avoid infinite retry loop in init_vp_index()
There is a retry loop in init_vp_index() where the CPUs from a certain
node are stripped out if they have already been in the allocated cpumask
or not in HK_TYPE_MANAGED_IRQ housekeeping cpumask. If there is no
CPU left, the allocated cpumask is ignored and the process is retried
again. However, if the HK_TYPE_MANAGED_IRQ housekeeping cpumask turns
out not to contain any CPU in that particular node, that will become an
infinite retry loop. This particular problem was reported by sashiko
[1]. This should rarely happen, but we still need to guard against this.
Fix this infinite loop problem by also skipping NUMA node that has no
housekeeping CPU in the inner while loop of init_vp_index(). Also update
the early abort check to check for the absence of online housekeeping
CPUs instead of just the emptiness of the cpumask. As the outer for
loop will only be reached if the housekeeping cpumask has at least one
online CPU, a NUMA node with housekeeping CPUs will eventually be found.
-
CVE-2026-99250
•
published on November 3, 2026
In the Linux kernel, the following vulnerability has been resolved:
printk: Postpone kthread startup
There have been various bug reports related to SMP systems hanging
on boot. The reports vary but seem to have some overlap with regard
to missed IPI's during SMP setup. The reports also show that
reverting NBCON console usage allows the bugs to disappear.
The NBCON kthreads for console printing are started very early
during boot using early_initcall(). Since these kthreads are
asynchronously enabling/disabling interrupts during early boot, they
may be interfering with early SMP setup on some hardware platforms.
Starting the console printing kthreads later has shown to avoid the
hanging on systems that could previously reproduce the issue.
Postpone kthread starting until after all arch initcalls have
completed.
-
CVE-2026-99248
•
published on November 3, 2026
In the Linux kernel, the following vulnerability has been resolved:
i2c: xiic: restore non-managed runtime PM to fix clk WARN flood
The devres conversion replaced manual pm_runtime_enable()/disable() with
devm_pm_runtime_set_active_enabled() and dropped the remove-time runtime
PM teardown. The managed release tears runtime PM down in the wrong
order: it calls pm_runtime_dont_use_autosuspend() before
pm_runtime_disable(), i.e. while runtime PM is still enabled, and devres
is LIFO so the devm_clk_get_enabled() release runs afterwards.
At remove(), pm_runtime_put_sync() leaves the device active with the
autosuspend timer armed. Clearing use_autosuspend then makes rpm_idle()
suspend immediately, and xiic_i2c_runtime_suspend() clk_disable()s the
clock. The later devm_clk_get_enabled() release clk_disable_unprepare()s
the already-disabled clock, so clk_core_disable() WARNs ("clkN already
disabled") on every teardown.
Drop the managed helper and restore the non-managed runtime PM setup and
teardown, so runtime PM is enabled once in probe and disabled once in
remove and the clock enable count stays balanced.
Order the remove teardown so runtime PM is disabled before the usage
count is dropped: pm_runtime_disable() followed by pm_runtime_put_noidle()
instead of pm_runtime_put_sync(). Dropping the count first with autosuspend
still enabled arms the autosuspend timer, and a preemption before
pm_runtime_disable() lets it expire, suspend the device and clk_disable()
the clock, which the devm release then disables again - the same WARN.
Restore the non-managed IRQ request as well. The probe error paths now
unwind runtime PM by hand via goto, and a devm-registered handler is only
freed later during devres unwind, so it would stay live across the manual
teardown (and across any future failing step added after it). Request the
IRQ with request_threaded_irq() and free it explicitly in the probe error
path and in remove. The probe error path also clears use_autosuspend, to
match the teardown in remove().
-
CVE-2026-99246
•
published on November 3, 2026
In the Linux kernel, the following vulnerability has been resolved:
tipc: protect node reset trace dump with node lock
The tipc_node_reset_links trace event asks tipc_node_dump() to walk the
node's link entries. Unlike the other node events that request link data,
this event runs without the node lock.
This permits bearer teardown to free a link while the trace callback is
dumping it:
CPU 0 CPU 1
trace_tipc_node_reset_links()
tipc_node_dump()
l = n-links[0].link
tipc_node_write_lock()
kfree(l)
n->links[0].link = NULL
tipc_node_write_unlock()
tipc_link_dump(l)
tipc_link_dump() then dereferences the stale pointer. KASAN reported:
BUG: KASAN: slab-use-after-free in tipc_link_dump
Read of size 4 by task poc/115
Call Trace:
tipc_link_dump+0x10cb/0x16b0
tipc_node_dump+0x4bb/0x740
trace_event_raw_event_tipc_node_class+0x258/0x360
tipc_node_reset_links+0x14d/0x1a0
tipc_rcv+0x13f5/0x3030
tipc_udp_recv+0x4e3/0x670
Allocated by task 0:
tipc_link_create+0x1e1/0x1020
tipc_node_check_dest+0x7d2/0x11a0
tipc_disc_rcv+0xdbf/0x1430
Freed by task 89:
kfree+0x131/0x3c0
tipc_node_link_down+0x267/0x4b0
tipc_node_delete_links+0xec/0x160
bearer_disable+0x107/0x260
Take the node write lock around the trace event. This serializes the
dump against tipc_node_link_down(delete=true), which frees the link
under the same write lock.
-
CVE-2026-99235
•
published on November 2, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Save the event file instead of the compatible histogram
create_field_var_hist() creates a histogram on the matched event to
supply a field variable, and records it on the target so it can be torn
down later:
hist_data = find_compatible_hist(target_hist_data, file);
...
/* Save the compatible histogram information */
var_hist-hist_data = hist_data;
hist_data is not the histogram it creates. It is one that was already
there, whose keys the new one copies. The saved pointer has a single
user, unregister_field_var_hists(), which runs when the target is
removed:
file = hist_data->field_var_hists[i]->hist_data->event_file;
find_compatible_hist() matches on keys alone, so it can pick one with no
variables of its own. check_var_refs() then returns false and the user
can remove it while the target still points at it:
BUG: KASAN: slab-use-after-free in event_hist_trigger_free+0x2b2/0x320
Read of size 8 at addr ffff8880093b90e0 by task init/1
Freed by task 1:
kfree+0x154/0x420
event_hist_trigger_free+0x1d5/0x320
event_hist_trigger_parse+0x35f3/0x69e0
trigger_process_regex+0x1a6/0x250
Save the event file instead. It is all the dereference ever wanted, and
it does not go away when the user removes a trigger.
-
CVE-2026-99232
•
published on November 2, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing/syscalls: Use copy_from_user for the faultable syscall buffer
syscall_copy_user_array() copies the buffer argument of faultable
syscalls (write, pwrite64, ...) with __copy_from_user(), which skips
access_ok(). Use copy_from_user() instead so a non-user address is
rejected and the entry is recorded as faulted.
It could be a security concern for machines that trust perf a bit too
much.
-
CVE-2026-99226
•
published on November 2, 2026
In the Linux kernel, the following vulnerability has been resolved:
keys: Avoid the owner account dereference in named keyring lookup
Named keyring lookup must keep the storage containing the owner UID
alive through the namespace mapping check. find_keyring_by_name()
reads keyring-user->uid under keyring_name_lock, but that lock protects
the keyring's name entry and allocation, not its separate key_user.
A named session-keyring join can overlap a privileged KEYCTL_CHOWN on
another CPU. If the keyring holds the last reference to its old dynamic
key_user and the ownership transfer succeeds, the following ordering is
possible:
Named join Chown
find_keyring_by_name() keyctl_chown_key()
read_lock(keyring_name_lock) down_write(key->sem)
load old keyring->user
replace key->user and key->uid
up_write(key->sem)
key_put(key)
key_user_put(old user): free
read old user->uid
read_unlock(keyring_name_lock)
Chown neither takes keyring_name_lock nor key_session_mutex, so it can
free the old account between the pointer load and the UID read. The
lookup then reads freed memory even though the keyring itself is alive.
Use keyring->uid for the mapping check. key_alloc() initializes this
inline owner UID and keyctl_chown_key() updates it on chown.
The existing name lock keeps its containing keyring allocated throughout
the check, so lookup no longer depends on the account's lifetime. This
also matches the owner UID used by the permission check.
KASAN report as below:
BUG: KASAN: slab-use-after-free in find_keyring_by_name+0x577/0x5d0
Read of size 4 at addr ffff8881128ae2ec by task keycase/500
-
CVE-2026-99221
•
published on November 2, 2026
In the Linux kernel, the following vulnerability has been resolved:
keys/trusted_keys: return immediately after TPM unseal failure
trusted_tpm_unseal() proceeds to pcrlock() when the TPM unseal operation
fails. If pcrlock() succeeds, its return value overwrites the unseal error,
causing key instantiation to succeed.
Return immediately when unseal fails to preserve the original error.
-
CVE-2026-99219
•
published on November 2, 2026
In the Linux kernel, the following vulnerability has been resolved:
ftrace: Initialize modname and offset in print_rec()
print_rec() leaves 'modname' and 'offset' uninitialized and
kallsyms_lookup() only sets them on success. When the lookup fails like
when a module is being loaded or unloaded, 'modname' holds a garbage
value, passes the 'if (modname)' check, and is dereferenced by
seq_printf().
Oops: general protection fault
RIP: 0010:string+0x48/0xe0
Call Trace:
vsnprintf+0x1f5/0x650
seq_printf+0x8e/0xb0
print_rec+0x6c/0xc0
t_show+0x4c/0x440
seq_read_iter+0x119/0x480
This can be triggered by reading available_filter_functions while a
module is being loaded or unloaded.
Initialize both variables so a failed lookup skips the module name.
-
CVE-2026-99214
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: hdmi: Move packet RAM enable to PM runtime
Audio can be triggered by the HPD handler and start up before video has
been restored, calling vc4_hdmi_write_infoframe() for the audio infoframe.
vc4_hdmi_write_infoframe() needs Packet RAM to be on to store the
infoframe, however, if the video hasn't been enabled,
vc4_hdmi_encoder_post_crtc_enable() hasn't been called and therefore, the
Packet RAM can be disabled by the time vc4_hdmi_write_infoframe() executes,
causing the following splat:
[ 201.570266] ------------[ cut here ]------------
[ 201.570293] Packet RAM has to be on to store the packet.
[ 201.570367] WARNING: drivers/gpu/drm/vc4/vc4_hdmi.c:683 at vc4_hdmi_write_infoframe+0x404/0x494 [vc4], CPU#0: wireplumber/1606
[...]
[ 201.658650] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[...]
[ 201.758499] Call trace:
[ 201.760967] vc4_hdmi_write_infoframe+0x404/0x494 [vc4] (P)
[ 201.766607] vc4_hdmi_write_audio_infoframe+0x1c/0x28 [vc4]
[ 201.772247] write_infoframe+0xbc/0x140 [drm_display_helper]
[ 201.777975] drm_atomic_helper_connector_hdmi_update_audio_infoframe+0x80/0xdc [drm_display_helper]
[ 201.787140] vc4_hdmi_audio_prepare+0x4ac/0x570 [vc4]
[ 201.792252] drm_connector_hdmi_audio_prepare+0x24/0x30 [drm_display_helper]
[ 201.799390] hdmi_codec_prepare+0x100/0x160 [snd_soc_hdmi_codec]
[ 201.805471] snd_soc_pcm_dai_prepare+0xd4/0x100 [snd_soc_core]
[ 201.811375] __soc_pcm_prepare+0x60/0x12c [snd_soc_core]
[ 201.816752] soc_pcm_prepare+0x34/0x58 [snd_soc_core]
[ 201.821863] snd_pcm_do_prepare+0x70/0x8c [snd_pcm]
[ 201.826798] snd_pcm_action_nonatomic+0xe4/0x174 [snd_pcm]
[ 201.832350] snd_pcm_prepare+0xc8/0xd8 [snd_pcm]
[ 201.837021] snd_pcm_common_ioctl+0x458/0x614 [snd_pcm]
[ 201.842308] snd_pcm_ioctl+0x30/0x48 [snd_pcm]
[ 201.846802] __arm64_sys_ioctl+0x88/0xd8
[ 201.850769] invoke_syscall+0x48/0xf4
[ 201.854470] el0_svc_common+0x80/0xd8
[ 201.858171] do_el0_svc+0x1c/0x28
[ 201.861520] el0_svc+0x3c/0xb0
[ 201.864605] el0t_64_sync_handler+0x68/0xdc
[ 201.868834] el0t_64_sync+0x198/0x19c
[ 201.872536] ---[ end trace 0000000000000000 ]---
Considering that Packet RAM enable is essentially a power management
configuration, move its enabling/disabling to the Runtime PM hooks.
Note that post_crtc_disable() still stops all infoframes, but keeps Packet
RAM enabled, leaving it to be disabled by runtime suspend.
-
CVE-2026-99212
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/rds: don't let the rdma_cm destroy an id RDS still owns on route failure
rds_rdma_cm_event_handler_cmn() hands the return value of
rdma_resolve_route() straight back to the rdma_cm on
RDMA_CM_EVENT_ADDR_RESOLVED. A synchronous failure there - -ENOMEM
from the route work allocation, an SA query that cannot be set up, a
RoCE route with no usable device - makes addr_handler() destroy the
id the event was delivered on. That id is ic-i_cm_id, and nothing
clears the pointer: the connection sits in RDS_CONN_CONNECTING with a
freed id until its shutdown calls rdma_disconnect() and
rdma_destroy_id() on it.
The ROUTE_RESOLVED case already avoids this: rds_ib_cm_initiate_connect()
forces a zero return while ic->i_cm_id == cm_id, as the comment there
explains. Do the same here - drop the connection and return 0 - so
the id stays RDS's to destroy from the shutdown, and the reconnect
gets a fresh one.
-
CVE-2026-99211
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
netlink: reset skb headers before unicast and multicast filtering
Socket filters can use SKF_NET_OFF and SKF_LL_OFF to read relative to
an skb's network and MAC headers. Netlink producers may reserve
headroom without resetting those headers, allowing a receiving socket's
filter to read data before the initialized message.
For example, IWPM HELLO replies are allocated with dev_alloc_skb(),
which reserves NET_SKB_PAD bytes. An unprivileged NETLINK_RDMA user can
attach a classic socket filter and disclose this headroom through the
length of the delivered reply. The resets in netlink_dump() do not help
because IWPM sends a separately allocated skb through netlink_unicast().
Reset both headers before running the receiver's filter in unicast and
broadcast delivery, as is already done for dump skbs. This also covers
other netlink producers that reserve headroom without changing their
allocation or message-building code.