-
CVE-2026-99117
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: don't truncate the port group walk on teardown
__br_multicast_disable_port_ctx() and br_multicast_del_port() walk
port-mglist with hlist_for_each_entry_safe(). However,
br_multicast_find_del_pg() can also delete other entries from the same
list through br_multicast_fwd_src_remove() or __fwd_del_star_excl().
If such an entry is the iterator's saved next node, hlist_del_init()
clears its ->next and terminates the walk early. The reproducer triggers
this in both teardown walks, leaving port groups in the bridge mdb with
a dangling ->key.port after del_nbp() frees the port:
BUG: KASAN: slab-use-after-free in __mdb_fill_info+0x1191/0x1320
__mdb_fill_info+0x1191/0x1320
br_mdb_dump+0x594/0xe40
rtnl_mdb_dump+0x1cf/0x5d0
Use hlist_del_init_rcu() to unlink the group while preserving ->next.
br_multicast_del_pg() and the teardown walks run under
br->multicast_lock. The GC worker must acquire the same lock before
detaching the group for destruction, so the node remains alive while
the walk uses the preserved pointer.
Preserving ->next means a walk can now reach a group that an earlier
iteration already deleted as a side effect. That group is off mp->ports,
so br_multicast_find_del_pg() would fall through its port scan and hit
the trailing WARN_ON(1). Skip such groups at the top of that helper: a
port group is put on port->mglist when it is created and only unlinked
when it is deleted, so hlist_unhashed() identifies exactly this case.
-
CVE-2026-99112
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flower: validate mask pointer after nla_next()
fl_set_enc_opt() iterates the key's nested tunnel-option attributes
with nla_for_each_attr() while advancing a single mask pointer via
nla_next() at the bottom of each loop, so the mask cursor is driven
by the number of key attributes rather than by the mask's own
attributes. The nla_ok() added by commit c96adff956191 ("cls_flower:
call nla_ok() before nla_next()") only validates the mask pointer
that was just consumed; the pointer produced by nla_next() is used by
the next iteration (fl_set_geneve_opt() and siblings) without any
validation.
The mask's nested attributes are validated with NL_VALIDATE_LIBERAL,
which merely warns on trailing bytes that do not form a complete
attribute. A mask carrying one valid attribute plus 1-3 residue
bytes (or a non-aligned attribute length making msk_depth negative)
therefore reaches the next iteration with msk_depth != 0, so neither
the !msk_depth check in fl_set_enc_opt() nor the !depth check in the
per-type helpers fires. nla_type() then reads past the mask payload
and nla_parse_nested_deprecated() iterates with an nla_len taken
from those bytes, reading well beyond the mask attribute (KASAN:
slab-out-of-bounds read in __nla_validate_parse from fl_change()).
Validate the advanced mask pointer as well: when the mask is not
legitimately exhausted (msk_depth != 0) and the new pointer fails
nla_ok(), reject the filter with -EINVAL. An exactly exhausted mask
still skips the check, preserving exact-match behaviour for the
remaining key attributes.
-
CVE-2026-99111
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix data corruption with concurrent writes and O_TRUNC
cifs_do_truncate() flushes dirty pages with filemap_write_and_wait()
and truncates the file on the server, but in the old code both
operations ran without holding i_rwsem or invalidate_lock. A
concurrent buffered write via netfs_perform_write() -- which only
needs i_rwsem shared -- could dirty new pages after the flush but
before the local truncation, and those pages would be silently
discarded by cifs_setsize() - truncate_pagecache().
Fix by acquiring inode_lock (exclusive i_rwsem) and
filemap_invalidate_lock at the top of cifs_do_truncate(), so the
entire flush-truncate-resize sequence is atomic with respect to:
- buffered writes (blocked by exclusive i_rwsem, since
netfs_start_io_write takes i_rwsem shared),
- read page faults (blocked by exclusive invalidate_lock, since
filemap_fault takes it shared),
- writeback collection (blocked by netfs_wb_begin/netfs_wb_end
around the server truncate and local resize, since
netfs_writepages also acquires the wb lock).
-
CVE-2026-99107
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix incorrect MFT record pointer passed to ntfs_attr_record_resize
ntfs_new_attr_flags() passes the wrong MFT record to ntfs_attr_record_resize().
When the attribute is in an extent record, ctx-mrec points to the extent
but the function receives the base record pointer m, causing incorrect
size calculations in memmove.
Fix by passing ctx->mrec (the actual MFT record containing the attribute)
instead of m (the base MFT record) to ntfs_attr_record_resize().
-
CVE-2026-99106
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: free the userptr ranges when a CS fails after parser_bos
amdgpu_cs_parser_bos() allocates an HMM range for every userptr entry of
the BO list and looks up the user pages. Those ranges are only freed when
amdgpu_cs_parser_bos() itself fails or when amdgpu_cs_submit() checks
them under the notifier lock. If amdgpu_cs_patch_jobs(),
amdgpu_cs_vm_handling(), amdgpu_cs_sync_rings() or the early part of
amdgpu_cs_submit() fails, nothing frees them: neither
amdgpu_cs_parser_fini() nor amdgpu_bo_list_free() touch e-range.
Each such CS then leaks the range, its hmm_pfns array (8 bytes per page
of the userptr BO) and the BO reference the range holds. An IB on a ring
that patches the CS in place (e.g. VCN) with an unmapped va_start fails
in amdgpu_cs_patch_ibs() and takes this path.
Free the ranges on those error paths. Ranges amdgpu_cs_submit() already
dropped are NULL, so freeing them again is a no-op.
(cherry picked from commit c52a9542ed7cfd527feb938bd0accada2ac8d267)
-
CVE-2026-99100
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: validate firmware record lengths
The p54 firmware parser accesses component ID and component version
records without checking that their lengths cover the fields being read.
A malformed record can therefore make the parser read past the record.
Validate the component ID and component version record lengths before
accessing their data. The descriptor record is also checked against the
shortest descriptor length found in the supported firmware images.
Reject descriptor values that underflow the RX offset or produce an empty
RX range before updating the driver state.
-
CVE-2026-9040
•
published on September 8, 2026
A race condition vulnerability in Arm Ltd Bifrost GPU Kernel Driver, Arm Ltd Valhall GPU Kernel Driver, Arm Ltd Arm 5th Gen GPU Architecture Kernel Driver allows a local non-privileged user process to perform improper GPU memory processing operations to cause a denial of service or disclose sensitive information.
This issue affects Bifrost GPU Kernel Driver: from r12p0 through r49p5, from r50p0 through r51p0, from r54p1 through r54p2; Valhall GPU Kernel Driver: from r19p0 through r49p5, from r50p0 through r54p3, r55p0; Arm 5th Gen GPU Architecture Kernel Driver: from r41p0 through r49p5, from r50p0 through r54p3, r55p0.
-
CVE-2026-9036
•
published on September 3, 2026
IBM Netezza Software 11.3.0.3 through Interim Fix 002 does not validate or improperly validates TLS certificate validation, which could allow an attacker to obtain sensitive information using man in the middle techniques.
-
CVE-2026-9033
•
published on August 20, 2026
An unauthenticated attacker with network access to the captive portal service of an affected device can terminate active captive portal sessions, including forcing logout of specific users or clearing all active sessions. Affected users must re-authenticate to regain access.
Successful exploitation may allow termination of individual or all active captive portal sessions, causing temporary service disruption and requiring users to re-authenticate.
-
CVE-2026-9004
•
published on September 22, 2026
The WP-CRM System – Manage Clients and Projects plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.4.6 via the 'contact_id' parameter. This makes it possible for authenticated attackers, with contributor-level access and above, to extract full names, email addresses, phone numbers, mobile numbers, fax numbers, and physical address information of arbitrary CRM contact records by enumerating the contact_id parameter.
-
CVE-2026-99284
•
published on November 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: propagate shared-frag marker in skb_zerocopy()
skb_zerocopy() moves frag descriptors from @from into @to and takes a
reference on each frag, but it does not copy skb_shinfo(from)-flags into
skb_shinfo(to)->flags. A destination skb holding the same page-cache
backed frags as the source therefore reports skb_has_shared_frag() as
false.
That breaks the invariant relied on by later in-place writers. ESP input
checks skb_has_shared_frag() before deciding whether an uncloned
nonlinear skb can skip skb_cow_data(); with the marker lost, an skb that
skb_zerocopy() built for nfnetlink_queue or for an openvswitch upcall is
decrypted in place, letting an unprivileged user write into the page
cache of a root-owned read-only file.
Propagate SKBFL_SHARED_FRAG when frag descriptors are copied, as done for
the other frag-transfer helpers.
-
CVE-2026-99281
•
published on November 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
tun: Require CAP_NET_ADMIN to attach to an ownerless device
Twenty years ago I made creating a tuntap device require CAP_NET_ADMIN
in commit ca6bb5d7ab22 ("[NET]: Require CAP_NET_ADMIN to create tuntap
devices.")
The idea was to allow the permissions on /dev/net/tun to be relaxed to
0666 and thus allow owners of tun devices assigned with TUNSETOWNER to
actually open it and get at their devices.
What we missed at the time was that persistent devices with *no* owner
were already essentially world-consumable, and anyone who could open
the device node could also attach to those.
Even then, using persistent devices with no explicitly set owner — on
the (false) presumption that CAP_NET_ADMIN would be required to open
them — wasn't an egregious userspace bug. There are cases where it does
make sense to separate the creation/configuration of the netdevice, from
the process which shovels packets into it.
Since then, TUNSETGROUP was added a year later in commit 8c644623fe7e
("[NET]: Allow group ownership of TUN/TAP devices."). Its commit message
noted that if both uid and gid are set, both have to match (in itself a
bizarre choice) — but still not that with *neither* set, no permission
at all was required.
Then in 2012 commit c8d68e6be1c3 ("tuntap: multiqueue support") allowed
new queues to be attached to a device from the moment of its creation,
with no way for userspace to close the race between creation and a
subsequent TUNSET{OWNER,GROUP}.
In 2024, commit 3ca459eaba1bf ("tun: fix group permission check") tried
to fix things to be saner: only require the user *or* the group to
match, in line with standard POSIX permissions, and require
CAP_NET_ADMIN if neither the user nor group authorised the access
(although it put the CAP_NET_ADMIN check first, and would wrongly have
reported the capability as having been used even when it was not).
That fix was reverted in commit a70c7b3cbc06 ("tun: revert fix group
permission check") due to allegedly causing a regression in an selinux
test suite which *expected* the attachment to succeed when authorised
by none of user, group, nor CAP_NET_ADMIN:
https://lore.kernel.org/netdev/CAFqZXNtkCBT4f+PwyVRmQGoT3p1eVa01fCG_aNtpt6dakXncUg@mail.gmail.com/
We should not break UAPI. But we don't have to consider an selinux test
case which deliberately exercises a security flaw to be UAPI worth
preserving either. To which end, I have fixed it in selinux-testsuite
commit b2f894f0016b ("tests/tun_tap: set an owner on the device for the
relabel tests").
So: fix the lack of CAP_NET_ADMIN check on devices which *haven't* been
assigned an owner or group, while leaving the weird tun ownership model
as it was (user *and* group have to match, if both are set). If someone
still wants to fix the latter (which wasn't actually the reason the
previous attempt was reverted), they can do it under separate cover.
Permit attaching to an existing device only if an owner and/or group was
set and the caller matches all that were set, or if the caller has
CAP_NET_ADMIN. The only behavioural change is that a device with no
owner or group now requires CAP_NET_ADMIN to attach — precisely the
loophole we want to close.
And put the CAP_NET_ADMIN check in the right place this time.
-
CVE-2026-99279
•
published on November 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: reclaim ended sessions on logoff and expiration
LOGOFF and previous-session replacement leave sessions Expired with a
zero credential expiry. Ended sessions can retain their memory and
connection slots when no further setup arrives on the owning connection.
Unpublish a logged-off session while the request reference keeps its
response signing and encryption keys alive. Remove its procfs entry
before dropping the table reference so a reader cannot remove its own
entry on the last put. Clear proc_entry after removal to avoid removing
it twice.
Reclaim ended sessions from the global table in the existing expiration
worker before it acquires conn_list_lock. Only select Expired sessions
with zero credential expiry and no references beyond the table
reference. Keep sessions whose Kerberos credentials expired available
for reauthentication.
Unlink the session from its setup connection and all channel
connections, so SMB2 sessions and sessions with only secondary SMB3
channels are covered. The session already holds connection references,
and sessions_table_lock prevents concurrent channel removal. Queue
sessions on a separate disposal list, leaving their hash nodes unhashed,
and remove procfs entries and drop table references outside the locks.
Keep the pending setup check before allocating a new session so
abandoned InProgress sessions can release their slots even at the
connection limit. Retain the timeout and reference checks and dispose of
those sessions outside the locks. Leave ended Expired sessions to the
expiration worker.
-
CVE-2026-99278
•
published on November 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: limit sessions on each connection
The pending setup limit only counts InProgress sessions. A client can
complete authentication repeatedly and retain an unbounded number of Valid
sessions on one connection.
Reserve a connection slot before allocating a session and retain a
connection reference while authentication is in progress. The first SMB3
channel takes over that reservation; binding to another connection reserves
one slot there. Reauthentication and authentication continuation reuse the
existing reservation. Return slots on allocation or insertion failure,
channel removal, and final session destruction.
Accept max_sessions_per_connection in reserved startup-request space and
default to 64 when older tools leave it zero. Keep the request size and
existing field offsets unchanged. Expose the configured limit in procfs.
The existing connection limits bound the aggregate number of sessions
without a separate global session allocation limit.
-
CVE-2026-99276
•
published on November 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: defer connection scavenging while session locks are busy
The expiration worker holds conn_list_lock for reading while checking
for authenticated sessions. Without this change, the check can wait for
conn-session_lock or sessions_table_lock.
In destroy_previous_session(), the status updates after
ksmbd_conn_wait_idle_sess() run with both session locks held for
writing. Both the KSMBD_SESS_GOOD error path and the
KSMBD_SESS_NEED_SETUP success path call ksmbd_all_conn_set_status(),
which takes conn_list_lock for reading.
A writer queued on conn_list_lock can block these new read acquisitions.
The worker then waits for a session lock held by
destroy_previous_session(), which waits behind the writer. The writer
cannot proceed until the worker releases conn_list_lock.
Try both session locks instead of waiting in the scavenging check. Keep
the connection when either lock is busy and let the periodic worker
retry later.
-
CVE-2026-99257
•
published on November 3, 2026
In the Linux kernel, the following vulnerability has been resolved:
gpio: shared: gracefully handle no-device lookup of shared GPIOs
We use platform lookup tables for shared GPIOs. This mechanism needs a
struct device to work so fwnode-based lookup with no device associated
currently causes a NULL-pointer deference.
Adding this functionality will require a larger rework and it has never
worked anyway so add a check that allows the kernel to gracefully handle
this situation with an error ahead of implementing that functionality as
a new feature.
-
CVE-2026-99251
•
published on November 3, 2026
In the Linux kernel, the following vulnerability has been resolved:
Drivers: hv: Avoid infinite retry loop in init_vp_index()
There is a retry loop in init_vp_index() where the CPUs from a certain
node are stripped out if they have already been in the allocated cpumask
or not in HK_TYPE_MANAGED_IRQ housekeeping cpumask. If there is no
CPU left, the allocated cpumask is ignored and the process is retried
again. However, if the HK_TYPE_MANAGED_IRQ housekeeping cpumask turns
out not to contain any CPU in that particular node, that will become an
infinite retry loop. This particular problem was reported by sashiko
[1]. This should rarely happen, but we still need to guard against this.
Fix this infinite loop problem by also skipping NUMA node that has no
housekeeping CPU in the inner while loop of init_vp_index(). Also update
the early abort check to check for the absence of online housekeeping
CPUs instead of just the emptiness of the cpumask. As the outer for
loop will only be reached if the housekeeping cpumask has at least one
online CPU, a NUMA node with housekeeping CPUs will eventually be found.
-
CVE-2026-99250
•
published on November 3, 2026
In the Linux kernel, the following vulnerability has been resolved:
printk: Postpone kthread startup
There have been various bug reports related to SMP systems hanging
on boot. The reports vary but seem to have some overlap with regard
to missed IPI's during SMP setup. The reports also show that
reverting NBCON console usage allows the bugs to disappear.
The NBCON kthreads for console printing are started very early
during boot using early_initcall(). Since these kthreads are
asynchronously enabling/disabling interrupts during early boot, they
may be interfering with early SMP setup on some hardware platforms.
Starting the console printing kthreads later has shown to avoid the
hanging on systems that could previously reproduce the issue.
Postpone kthread starting until after all arch initcalls have
completed.
-
CVE-2026-99248
•
published on November 3, 2026
In the Linux kernel, the following vulnerability has been resolved:
i2c: xiic: restore non-managed runtime PM to fix clk WARN flood
The devres conversion replaced manual pm_runtime_enable()/disable() with
devm_pm_runtime_set_active_enabled() and dropped the remove-time runtime
PM teardown. The managed release tears runtime PM down in the wrong
order: it calls pm_runtime_dont_use_autosuspend() before
pm_runtime_disable(), i.e. while runtime PM is still enabled, and devres
is LIFO so the devm_clk_get_enabled() release runs afterwards.
At remove(), pm_runtime_put_sync() leaves the device active with the
autosuspend timer armed. Clearing use_autosuspend then makes rpm_idle()
suspend immediately, and xiic_i2c_runtime_suspend() clk_disable()s the
clock. The later devm_clk_get_enabled() release clk_disable_unprepare()s
the already-disabled clock, so clk_core_disable() WARNs ("clkN already
disabled") on every teardown.
Drop the managed helper and restore the non-managed runtime PM setup and
teardown, so runtime PM is enabled once in probe and disabled once in
remove and the clock enable count stays balanced.
Order the remove teardown so runtime PM is disabled before the usage
count is dropped: pm_runtime_disable() followed by pm_runtime_put_noidle()
instead of pm_runtime_put_sync(). Dropping the count first with autosuspend
still enabled arms the autosuspend timer, and a preemption before
pm_runtime_disable() lets it expire, suspend the device and clk_disable()
the clock, which the devm release then disables again - the same WARN.
Restore the non-managed IRQ request as well. The probe error paths now
unwind runtime PM by hand via goto, and a devm-registered handler is only
freed later during devres unwind, so it would stay live across the manual
teardown (and across any future failing step added after it). Request the
IRQ with request_threaded_irq() and free it explicitly in the probe error
path and in remove. The probe error path also clears use_autosuspend, to
match the teardown in remove().
-
CVE-2026-99246
•
published on November 3, 2026
In the Linux kernel, the following vulnerability has been resolved:
tipc: protect node reset trace dump with node lock
The tipc_node_reset_links trace event asks tipc_node_dump() to walk the
node's link entries. Unlike the other node events that request link data,
this event runs without the node lock.
This permits bearer teardown to free a link while the trace callback is
dumping it:
CPU 0 CPU 1
trace_tipc_node_reset_links()
tipc_node_dump()
l = n-links[0].link
tipc_node_write_lock()
kfree(l)
n->links[0].link = NULL
tipc_node_write_unlock()
tipc_link_dump(l)
tipc_link_dump() then dereferences the stale pointer. KASAN reported:
BUG: KASAN: slab-use-after-free in tipc_link_dump
Read of size 4 by task poc/115
Call Trace:
tipc_link_dump+0x10cb/0x16b0
tipc_node_dump+0x4bb/0x740
trace_event_raw_event_tipc_node_class+0x258/0x360
tipc_node_reset_links+0x14d/0x1a0
tipc_rcv+0x13f5/0x3030
tipc_udp_recv+0x4e3/0x670
Allocated by task 0:
tipc_link_create+0x1e1/0x1020
tipc_node_check_dest+0x7d2/0x11a0
tipc_disc_rcv+0xdbf/0x1430
Freed by task 89:
kfree+0x131/0x3c0
tipc_node_link_down+0x267/0x4b0
tipc_node_delete_links+0xec/0x160
bearer_disable+0x107/0x260
Take the node write lock around the trace event. This serializes the
dump against tipc_node_link_down(delete=true), which frees the link
under the same write lock.