-
CVE-2026-99235
•
published on November 2, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Save the event file instead of the compatible histogram
create_field_var_hist() creates a histogram on the matched event to
supply a field variable, and records it on the target so it can be torn
down later:
hist_data = find_compatible_hist(target_hist_data, file);
...
/* Save the compatible histogram information */
var_hist-hist_data = hist_data;
hist_data is not the histogram it creates. It is one that was already
there, whose keys the new one copies. The saved pointer has a single
user, unregister_field_var_hists(), which runs when the target is
removed:
file = hist_data->field_var_hists[i]->hist_data->event_file;
find_compatible_hist() matches on keys alone, so it can pick one with no
variables of its own. check_var_refs() then returns false and the user
can remove it while the target still points at it:
BUG: KASAN: slab-use-after-free in event_hist_trigger_free+0x2b2/0x320
Read of size 8 at addr ffff8880093b90e0 by task init/1
Freed by task 1:
kfree+0x154/0x420
event_hist_trigger_free+0x1d5/0x320
event_hist_trigger_parse+0x35f3/0x69e0
trigger_process_regex+0x1a6/0x250
Save the event file instead. It is all the dereference ever wanted, and
it does not go away when the user removes a trigger.
-
CVE-2026-99232
•
published on November 2, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing/syscalls: Use copy_from_user for the faultable syscall buffer
syscall_copy_user_array() copies the buffer argument of faultable
syscalls (write, pwrite64, ...) with __copy_from_user(), which skips
access_ok(). Use copy_from_user() instead so a non-user address is
rejected and the entry is recorded as faulted.
It could be a security concern for machines that trust perf a bit too
much.
-
CVE-2026-99226
•
published on November 2, 2026
In the Linux kernel, the following vulnerability has been resolved:
keys: Avoid the owner account dereference in named keyring lookup
Named keyring lookup must keep the storage containing the owner UID
alive through the namespace mapping check. find_keyring_by_name()
reads keyring-user->uid under keyring_name_lock, but that lock protects
the keyring's name entry and allocation, not its separate key_user.
A named session-keyring join can overlap a privileged KEYCTL_CHOWN on
another CPU. If the keyring holds the last reference to its old dynamic
key_user and the ownership transfer succeeds, the following ordering is
possible:
Named join Chown
find_keyring_by_name() keyctl_chown_key()
read_lock(keyring_name_lock) down_write(key->sem)
load old keyring->user
replace key->user and key->uid
up_write(key->sem)
key_put(key)
key_user_put(old user): free
read old user->uid
read_unlock(keyring_name_lock)
Chown neither takes keyring_name_lock nor key_session_mutex, so it can
free the old account between the pointer load and the UID read. The
lookup then reads freed memory even though the keyring itself is alive.
Use keyring->uid for the mapping check. key_alloc() initializes this
inline owner UID and keyctl_chown_key() updates it on chown.
The existing name lock keeps its containing keyring allocated throughout
the check, so lookup no longer depends on the account's lifetime. This
also matches the owner UID used by the permission check.
KASAN report as below:
BUG: KASAN: slab-use-after-free in find_keyring_by_name+0x577/0x5d0
Read of size 4 at addr ffff8881128ae2ec by task keycase/500
-
CVE-2026-99221
•
published on November 2, 2026
In the Linux kernel, the following vulnerability has been resolved:
keys/trusted_keys: return immediately after TPM unseal failure
trusted_tpm_unseal() proceeds to pcrlock() when the TPM unseal operation
fails. If pcrlock() succeeds, its return value overwrites the unseal error,
causing key instantiation to succeed.
Return immediately when unseal fails to preserve the original error.
-
CVE-2026-99219
•
published on November 2, 2026
In the Linux kernel, the following vulnerability has been resolved:
ftrace: Initialize modname and offset in print_rec()
print_rec() leaves 'modname' and 'offset' uninitialized and
kallsyms_lookup() only sets them on success. When the lookup fails like
when a module is being loaded or unloaded, 'modname' holds a garbage
value, passes the 'if (modname)' check, and is dereferenced by
seq_printf().
Oops: general protection fault
RIP: 0010:string+0x48/0xe0
Call Trace:
vsnprintf+0x1f5/0x650
seq_printf+0x8e/0xb0
print_rec+0x6c/0xc0
t_show+0x4c/0x440
seq_read_iter+0x119/0x480
This can be triggered by reading available_filter_functions while a
module is being loaded or unloaded.
Initialize both variables so a failed lookup skips the module name.
-
CVE-2026-99214
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: hdmi: Move packet RAM enable to PM runtime
Audio can be triggered by the HPD handler and start up before video has
been restored, calling vc4_hdmi_write_infoframe() for the audio infoframe.
vc4_hdmi_write_infoframe() needs Packet RAM to be on to store the
infoframe, however, if the video hasn't been enabled,
vc4_hdmi_encoder_post_crtc_enable() hasn't been called and therefore, the
Packet RAM can be disabled by the time vc4_hdmi_write_infoframe() executes,
causing the following splat:
[ 201.570266] ------------[ cut here ]------------
[ 201.570293] Packet RAM has to be on to store the packet.
[ 201.570367] WARNING: drivers/gpu/drm/vc4/vc4_hdmi.c:683 at vc4_hdmi_write_infoframe+0x404/0x494 [vc4], CPU#0: wireplumber/1606
[...]
[ 201.658650] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[...]
[ 201.758499] Call trace:
[ 201.760967] vc4_hdmi_write_infoframe+0x404/0x494 [vc4] (P)
[ 201.766607] vc4_hdmi_write_audio_infoframe+0x1c/0x28 [vc4]
[ 201.772247] write_infoframe+0xbc/0x140 [drm_display_helper]
[ 201.777975] drm_atomic_helper_connector_hdmi_update_audio_infoframe+0x80/0xdc [drm_display_helper]
[ 201.787140] vc4_hdmi_audio_prepare+0x4ac/0x570 [vc4]
[ 201.792252] drm_connector_hdmi_audio_prepare+0x24/0x30 [drm_display_helper]
[ 201.799390] hdmi_codec_prepare+0x100/0x160 [snd_soc_hdmi_codec]
[ 201.805471] snd_soc_pcm_dai_prepare+0xd4/0x100 [snd_soc_core]
[ 201.811375] __soc_pcm_prepare+0x60/0x12c [snd_soc_core]
[ 201.816752] soc_pcm_prepare+0x34/0x58 [snd_soc_core]
[ 201.821863] snd_pcm_do_prepare+0x70/0x8c [snd_pcm]
[ 201.826798] snd_pcm_action_nonatomic+0xe4/0x174 [snd_pcm]
[ 201.832350] snd_pcm_prepare+0xc8/0xd8 [snd_pcm]
[ 201.837021] snd_pcm_common_ioctl+0x458/0x614 [snd_pcm]
[ 201.842308] snd_pcm_ioctl+0x30/0x48 [snd_pcm]
[ 201.846802] __arm64_sys_ioctl+0x88/0xd8
[ 201.850769] invoke_syscall+0x48/0xf4
[ 201.854470] el0_svc_common+0x80/0xd8
[ 201.858171] do_el0_svc+0x1c/0x28
[ 201.861520] el0_svc+0x3c/0xb0
[ 201.864605] el0t_64_sync_handler+0x68/0xdc
[ 201.868834] el0t_64_sync+0x198/0x19c
[ 201.872536] ---[ end trace 0000000000000000 ]---
Considering that Packet RAM enable is essentially a power management
configuration, move its enabling/disabling to the Runtime PM hooks.
Note that post_crtc_disable() still stops all infoframes, but keeps Packet
RAM enabled, leaving it to be disabled by runtime suspend.
-
CVE-2026-99212
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/rds: don't let the rdma_cm destroy an id RDS still owns on route failure
rds_rdma_cm_event_handler_cmn() hands the return value of
rdma_resolve_route() straight back to the rdma_cm on
RDMA_CM_EVENT_ADDR_RESOLVED. A synchronous failure there - -ENOMEM
from the route work allocation, an SA query that cannot be set up, a
RoCE route with no usable device - makes addr_handler() destroy the
id the event was delivered on. That id is ic-i_cm_id, and nothing
clears the pointer: the connection sits in RDS_CONN_CONNECTING with a
freed id until its shutdown calls rdma_disconnect() and
rdma_destroy_id() on it.
The ROUTE_RESOLVED case already avoids this: rds_ib_cm_initiate_connect()
forces a zero return while ic->i_cm_id == cm_id, as the comment there
explains. Do the same here - drop the connection and return 0 - so
the id stays RDS's to destroy from the shutdown, and the reconnect
gets a fresh one.
-
CVE-2026-99211
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
netlink: reset skb headers before unicast and multicast filtering
Socket filters can use SKF_NET_OFF and SKF_LL_OFF to read relative to
an skb's network and MAC headers. Netlink producers may reserve
headroom without resetting those headers, allowing a receiving socket's
filter to read data before the initialized message.
For example, IWPM HELLO replies are allocated with dev_alloc_skb(),
which reserves NET_SKB_PAD bytes. An unprivileged NETLINK_RDMA user can
attach a classic socket filter and disclose this headroom through the
length of the delivered reply. The resets in netlink_dump() do not help
because IWPM sends a separately allocated skb through netlink_unicast().
Reset both headers before running the receiver's filter in unicast and
broadcast delivery, as is already done for dump skbs. This also covers
other netlink producers that reserve headroom without changing their
allocation or message-building code.
-
CVE-2026-99207
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Disable interrupts while holding delayed_cmd_lock
target_do_delayed_work() takes dev-delayed_cmd_lock with a plain
spin_lock(). It runs from system_percpu_wq, so interrupts stay enabled
while the lock is held. Every other acquisition of that lock uses
spin_lock_irqsave(): target_handle_task_attr() and
transport_complete_ordered_sync() in target_core_transport.c, and
target_non_ordered_release() in target_core_device.c.
That was safe while every caller of transport_complete_task_attr() ran
in process context: target_complete_ok_work() from target_completion_wq,
transport_complete_qf() from dev->qf_work_queue, and
transport_generic_request_failure() from the submit and execute paths.
Since commit 06933066d88a ("scsi: target: Add support for completing
commands from backend context") that is no longer true. With
complete_type=1 on a fabric that sets direct_compl_supp,
target_complete() runs target_complete_ok_work() inline in the backend's
completion context, which target_complete_cmd_with_sense() documents as
"May be called from interrupt context". For iblock that is the bio
end_io.
target_complete_ok_work() starts with transport_complete_task_attr(),
which takes delayed_cmd_lock in two ways:
- Every ORDERED command is put on dev->delayed_cmd_list by
target_handle_task_attr() and dispatched from there by
target_do_delayed_work(), which marks it SCF_TASK_ORDERED_SYNC. Its
completion therefore goes through transport_complete_ordered_sync().
- A SIMPLE command that completes while an ORDERED command is pending
drops the last reference to the killed dev->non_ordered, and
percpu_ref_put() then runs target_non_ordered_release() in the
completing context.
Both take the lock and, if commands are waiting, call
schedule_work(&dev->delayed_cmd_work), which queues on system_percpu_wq,
i.e. on the CPU that took the completion. Further completions for the
same queue are typically delivered there too, so one arriving while the
work holds the lock spins on it forever.
Reaching this needs complete_type=1, which is not the default
(vhost-scsi, the only fabric with direct_compl_supp, defaults to
TARGET_QUEUE_COMPL), a backend whose I/O completes from interrupt
context, and ORDERED commands from the initiator. Linux virtio_scsi
guests send only VIRTIO_SCSI_S_SIMPLE and never take the ordered path;
any guest that uses the ORDERED task attribute, which vhost-scsi
accepts, does.
target_do_delayed_work() is a work item and always runs in process
context, so spin_lock_irq() is sufficient.
Found by inspection; no runtime report. A single ORDERED command goes
through both acquisitions, so with CONFIG_PROVE_LOCKING the first one
completed through direct completion should produce an inconsistent lock
state report on delayed_cmd_lock (hardirq or softirq, depending on where
the backend completes).
-
CVE-2026-99190
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
gpiolib: fix memory leak in gpiod_set_array_value_complex() on error paths
A drive-by review by Sashiko reports that, after a failed call to
gpiochip_set_multiple(), gpiod_set_array_value() returns abruptly,
bypassing the freeing of possibly alloced bitmaps, potentially leaking
memory. It is an unlikely error path, but is possible.
Defer the return code check until after the bitmap_free() block.
-
CVE-2026-99189
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
gpio: mxc: fix race between chained IRQ handler install and probe completion
mxc_update_irq_chained_handler() is called before the IRQ domain, the
generic IRQ chip, and the port list entry are set up. If an interrupt
arrives in that window:
- mx3_gpio_irq_handler() calls generic_handle_domain_irq() with
port-domain still NULL.
- mx2_gpio_irq_handler() walks mxc_gpio_ports, but the port has not
been added to the list yet.
Additionally, if any of the subsequent probe steps
(gpio_generic_chip_init(), devm_gpiochip_add_data(),
irq_domain_create_legacy(), or mxc_gpio_init_gc()) fail, the error
paths never unregister the chained handler, leaving a dangling handler
that points at freed memory.
Move the handler installation after all its dependencies are ready and
after list_add_tail(), so the handler is never live while the data
structures it touches are incomplete, and is never installed if probe
fails.
-
CVE-2026-99188
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: dwmac1000: clear the RGMII status interrupt
Since commit 2e2c878a3141 ("net: stmmac: remove SGMII/RGMII/SMII
interrupt handling") nothing on the RGMII path reads GMAC_RGSMIIIS, so
RGSMIIIS stays pending behind GMAC_INT_MASK from the first link change
on. stmmac_resume() resets the MAC in stmmac_hw_setup(); the reset sets
GMAC_INT_MASK to 0 until dwmac1000_core_init() writes the mask again,
and the pending status storms the line:
dwmac_dma_interrupt: unexpected status 04000000
A register dump at the first message on ODROID-HC4 showed it:
core int_status 00000001 int_mask 00000000 pmt 00000000 rgsmiiis 0000000d
When the resume thread runs on the CPU that takes the MAC interrupt,
the storm starves it: a soft lockup, then a watchdog reset or a hang.
Read GMAC_RGSMIIIS in dwmac1000_irq_status() when the status is not
masked, as the driver did before 2e2c878a3141; the read clears it.
Wake-on-LAN resume from s2idle with the resume thread and the MAC
interrupt on one CPU: Helios64 (dwmac-rk), 7.3-rc6, soft-locked in 3 of
3 resumes without a fix and in 0 of 10 with this patch; it ran with an
out-of-tree dwmac-rk change that keeps the GMAC powered across suspend.
ODROID-HC4 (dwmac-meson8b): 0 of 10 with this patch, 2 of 2 without a
fix on a 7.3-rc5 build. irq_rgmii_n went up by one per resume.
-
CVE-2026-99181
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
autofs: ignore notification errors from a replaced pipe
autofs_notify_daemon() takes a reference to the current notification
pipe under wq_mutex, then drops the mutex before writing the request. The
write can block while the daemon enters catatonic mode and installs a
replacement pipe.
If the old pipe's reader is then closed, the delayed write returns -EPIPE
and the generic error path enters catatonic mode again. That transition
acts on the current superblock state, closes the replacement pipe, and
releases the new daemon generation's wait queues.
Only enter catatonic mode when the pipe which failed is still the current
pipe. Factor the already-locked transition so the identity check and state
change are atomic with respect to another replacement.
This was reproduced on v7.3-rc5-337-gff47652a4b66c in a local QEMU guest.
An unprivileged UID 65534 lookup filled the old packet pipe before a
normal CATATONIC/SETPIPEFD restart. On the unmodified kernel, the new pipe
received HUP and both a pending victim lookup and a later lookup failed
with ENOENT in two out of two fresh-mount runs.
With this change, the new pipe remained active, received an intact
304-byte request, and both victim lookups completed in two out of two
runs. Normal lookup and restart-without-a-blocked-writer controls passed.
No KASAN, oops, refcount, or lock diagnostic was observed. A source
reproducer and complete local logs are available privately on request.
The demonstrated impact is limited to denial of a shared autofs service
during a legitimate daemon restart. No memory corruption, information leak,
privilege escalation, or code execution primitive was observed.
-
CVE-2026-99179
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
watch_queue: Fix note pool publication race in watch_queue_set_size()
There is a race between watch_queue_set_size() and post_one_notification().
watch_queue_set_size() publishes wqueue-notes, notes_bitmap, nr_pages and
nr_notes with plain stores, and post_one_notification() reads them with
plain loads under a different lock, so nothing orders the four stores
against the poster's loads: depending on the build, notes can be stored
last (gcc 14 on x86-64 does this). Since keyctl_watch_key() lets a watch
attach to a queue before it is sized, post_one_notification() can already
be running on another CPU at that moment: it reads nr_notes > 0, passes
its bounds check, and then reads notes while it is still NULL,
dereferencing notes[0].
An unprivileged user triggers this reliably by watching one of its own
keys through a notification pipe and racing ioctl(IOC_WATCH_QUEUE_SET_SIZE)
on that pipe against keyctl(KEYCTL_SETPERM) on the key from another CPU,
triggering:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:post_one_notification.isra.0+0xa2/0x1e0
Call Trace:
__post_watch_notification+0x148/0x180
keyctl_setperm_key+0x119/0x130
do_syscall_64+0x108/0x4c0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Kernel panic - not syncing: Fatal exception in interrupt
Fix this by publishing nr_notes last with smp_store_release(), and by
reading it once with smp_load_acquire() in post_one_notification() before
the bitmap and the page array are touched. A poster that observes a
non-zero nr_notes then also observes the pool behind it; one that observes
zero drops the notification as before.
-
CVE-2026-99176
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Reset MMU back to the root MMU if loading L2 state fails for !VM-Entry
Reset the vCPU's MMU pointer back to the root MMU if loading L2 state fails
in the "not from VM-Entry" case, i.e. when emulating RSM or handling
KVM_SET_NESTED_STATE. Failure to unwind the MMU pointer results in KVM
trying to run L1 with a nested MMU, and is especially problematic if the
vCPU manages to free its nested state before the VM crashes. Constructing
the root for a nested EPT MMU goes through vmcs12, which is dynamically
allocated/freed when nVMX is enabled/disabled. And so if the nested state
is freed with the MMU still pointing at the nested MMU, KVM will hit a NULL
pointer deref when attempting to get L1=L2 EPTP.
BUG: kernel NULL pointer dereference, address: 0000000000000078
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 114a2d067 P4D 111743067 PUD 11141f067 PMD 0
Oops: Oops: 0000 [#1] SMP
CPU: 20 UID: 1000 PID: 1272 Comm: nested_tdp_faul Not tainted 7.3.0-rc4-8c89f11d1a99b-sink-vm #1914 PREEMPTLAZY
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel]
Call Trace:
TASK>
kvm_mmu_load+0xcd/0x870 [kvm]
kvm_arch_vcpu_ioctl_run+0x18f5/0x1f80 [kvm]
kvm_vcpu_ioctl+0x2c7/0x970 [kvm]
__x64_sys_ioctl+0x90/0xd0
do_syscall_64+0x9c/0x4d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x47491b
Modules linked in: kvm_intel kvm irqbypass
CR2: 0000000000000078
---[ end trace 0000000000000000 ]---
RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel]
[sean: write changelog]
-
CVE-2026-99173
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
eventfs: Free the eventfs_inode after an rcu grace period too
tracefs_d_revalidate() reads -is_freed of the eventfs_inode that
dentry->d_fsdata points to, and ->d_revalidate() is called in rcu
pathwalk mode with nothing but rcu_read_lock() held. The dentry itself
stays around for such a walker, but tracefs_d_release() drops its
reference to the eventfs_inode when the dentry is killed, and
release_ei() then frees it after a grace period of eventfs_srcu. An
SRCU grace period doesn't wait for rcu_read_lock() sections, so the
walker can read an eventfs_inode that is already gone.
With a pathwalk held up in tracefs_d_revalidate() while the dentry goes
away:
BUG: KASAN: slab-use-after-free in tracefs_d_revalidate+0x76/0x90
Read of size 1 at addr ff1100010152d8d0 by task walker/97
Call Trace:
TASK>
tracefs_d_revalidate+0x76/0x90
lookup_fast+0x320/0x640
path_lookupat+0x160/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
vfs_fstatat+0x4d/0x90
__do_sys_newfstatat+0xa0/0x100
do_syscall_64+0x10e/0x5e0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
[...]
Allocated by task 1:
__kmalloc_cache_noprof+0x249/0x560
eventfs_create_dir+0x7a/0x590
event_create_dir+0x2fb/0xcf0
trace_add_event_call+0xbf/0x150
[...]
Freed by task 11:
kfree+0x1db/0x5b0
srcu_invoke_callbacks+0x3a3/0x620
process_one_work+0x937/0x1810
worker_thread+0x4f1/0xd60
Before commit 8e556432477e ("eventfs: Use SRCU for freeing
eventfs_inodes") release_ei() used call_rcu(), which covered the walker,
while eventfs_iterate() needs the SRCU grace period. Wait for both and
chain call_rcu() from the SRCU callback.
-
CVE-2026-99171
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
ntfs3: free the sbi after a grace period
If the "nocase" mount option ntfs3 uses custom hash and dentry compare
functions. Both access ntfs3 superblock private information in rcu
pathwalk. ntfs_put_super() and ntfs3_kill_sb() drop the info without any
rcu delay. A lookup that's still inside the filesystem when the last
reference to the mount is dropped causes a UAF. With a pathwalk held up
in ntfs_d_hash() while the last reference to the mount goes away:
BUG: KASAN: slab-use-after-free in ntfs_nls_to_utf16+0x752/0x940
Read of size 8 at addr ff1100010453c850 by task walker/99
Call Trace:
TASK
ntfs_nls_to_utf16+0x752/0x940
ntfs_d_hash+0x22b/0x500
link_path_walk+0x11ad/0x1d30
path_lookupat+0x63/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
[...]
Allocated by task 95:
__kmalloc_cache_noprof+0x249/0x560
ntfs_init_fs_context+0x2db/0x5a0
alloc_fs_context+0x52e/0xc70
[...]
Freed by task 98:
kfree+0x1db/0x5b0
deactivate_locked_super+0x9c/0xf0
cleanup_mnt+0x9f/0x130
task_work_run+0x131/0x250
The bug is currently masked by the grace period in namespace_unlock()
for umount(2). Keep the necessary information until the filesystem
private info is freed and free it with an rcu delay.
ntfs3_free_sbi() now runs from an rcu callback and drops the upcase
table via ntfs_put_shared(). So switch s_shared_lock over to
spin_lock_bh(). Otherwise the callback can deadlock against a task
holding the lock on the same cpu.
-
CVE-2026-99170
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
namespace: a mount that copy_tree() leaves out can't take over a lock
Since commit c62a4766937e ("move_mount: transfer MNT_LOCKED") a mount
can be moved beneath a locked mount. The lock moves from the old cover
to the new mount which takes over the job of hiding what's under it and
the old cover can be unmounted. That works as long as the new mount
stays. But the caller picks the new mount and copy_tree() leaves a
mount of a mount namespace file out of every copy made without
CL_COPY_MNT_NS_FILE, together with everything mounted on it, and never
looks at MNT_LOCKED. unshare(CLONE_NEWNS) and mount propagation make
such copies.
So a task that is root in its own user namespace gets rid of a locked
cover on a file without a race and without touching the filesystem
below it. It makes a child with a mount namespace of its own, binds the
child's /proc/pid/ns/mnt beneath the cover with MOVE_MOUNT_BENEATH,
which hands the lock to that bind, and calls unshare(CLONE_NEWNS). The
new mount namespace has nothing on the file. That's the usual way to
mask a single file, a bind of /dev/null or of an empty file. With a
bind of an ordinary file the file stays covered.
copy_tree() already refuses to leave out a locked unbindable mount with
-EPERM since commit df7342b24018 ("mount: Don't allow copying
MNT_UNBINDABLE|MNT_LOCKED mounts"). Do the same for a locked mount of a
mount namespace file. That also covers a tree copied with
CL_COPY_MNT_NS_FILE and attached into a mount namespace of another user
namespace where lock_mnt_tree() locks it. Note that unshare(CLONE_NEWNS)
and clone(CLONE_NEWNS) fail with EPERM from such a mount namespace from
then on. The mount can't be left out and it can't be unmounted.
And refuse to move a mount of a mount namespace file beneath a locked
mount in the first place. Otherwise the task ends up with a mount it
can't unmount and an unshare() that fails for good.
Chris also found a second mount that goes away by itself, a clone of an
automounted mount that shrink_submounts() took along with its parent.
Commit f78ddcc87224 ("namespace: never expire a locked mount") took
care of that one.
Chris's reproducer is appended. Mode nsfile reads SECRET after the
unshare() on 7.3-rc7, with this patch the move_mount() fails with
EINVAL and the file stays covered. nsfile-control uses an ordinary file
and reads MASK both ways.
// SPDX-License-Identifier: GPL-2.0
/*
* Get rid of a locked cover with MOVE_MOUNT_BENEATH.
*
* The "admin" (root) makes a tmpfs W:
* W/D file, holds SECRET, covered by a bind of a file with MASK
* W/Dd/inner file, holds SECRET, Dd is covered by a bind of a directory
* whose "inner" holds MASK
* W/own directory of uid 1000 with the file "mine" and the
* directory "minedir", whose "inner" holds MINE
* W/dbg debugfs, mode 755. dbg/tracing is an automount point
* The "attacker" is uid 1000. It enters a new user namespace with a new mount
* namespace, so W and both covers are locked there.
*
* usage: prog MODE
* plain put a bind of own/mine beneath the cover of D, unmount the cover
* nsfile put a bind of the mount namespace file of a child beneath the
* cover of D, then unshare(CLONE_NEWNS)
* nsfile-control the same with a bind of own/mine
* shrink put a bind of the automounted tracefs beneath the cover of Dd,
* unmount the cover, put a tmpfs beneath W, call umount(W), which fails
* shrink-control the same with a bind of own/minedir
* The environment variable AUTOMOUNT_DIR names another automount point for "shrink".
*/
#define _GNU_SOURCE
#include
#include
#include
#include
#include
#include
#include
#include
#include
---truncated---
-
CVE-2026-99167
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix use-after-free in __tcf_action_put()
__tcf_action_put() decrements the reference count before decrementing the
binding count. Another thread can free the action between these operations,
causing the binding-count update to access freed memory. KASAN reports it
as:
BUG: KASAN: slab-use-after-free in __tcf_action_put+0x327/0x340
Write of size 4 at addr ff11000000d46420 by task tc-put-pause/64
Hold the action IDR mutex across both counter updates and IDR removal,
keeping cleanup outside the lock.
-
CVE-2026-99165
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
sctp: revalidate output stream after association connect wait
When message interleaving is enabled, the first send waits for association
establishment before building its data chunks. The wait drops the socket
lock, and handshake processing can reduce the output stream count to the
peer-advertised inbound stream count. sctp_stream_init() then frees the
extension of every removed stream.
The sender resumes with the stream that it checked before the wait. If the
peer removed that stream, sctp_outq_tail() later dereferences its NULL
extension. Fatal-oops policies then panic the host.
KASAN: null-ptr-deref in range [0x38-0x3f]
RIP: sctp_outq_tail+0x49e/0xaa0
Call Trace:
sctp_primitive_SEND
sctp_sendmsg_to_asoc
sctp_sendmsg
A range check alone is insufficient. Stream reconfiguration can grow the
output count again while the lock is released without recreating extensions
freed by the earlier shrink. The stream can then be in range while its
extension remains NULL. The send-buffer wait has the same issue.
Factor the range and extension checks into a helper and repeat both after
each send-path wait that drops the socket lock. Once the lock is
reacquired, the validation remains stable through data creation and
queueing.
If validation fails after the connect wait, the auto-created association is
already established. Return ESRCH so the existing caller path keeps it
under state-machine ownership instead of freeing it directly, which would
leave protocol, counter and socket state inconsistent.