-
CVE-2026-99224
•
published on November 2, 2026
In the Linux kernel, the following vulnerability has been resolved:
keys: Protect the type name while describing a key
keyctl_describe_key() must keep the key type's name alive until
kasprintf() has consumed it. The retained key reference keeps the key
and its description alive, but does not pin the module providing its
type. The name is passed to kasprintf() without holding key-sem.
kvasprintf() uses the saved name pointer in two formatting passes, with
a GFP_KERNEL allocation between them. With AF_RXRPC=m, a task that
passes View permission before type retirement can overlap a privileged
module unload in this order:
1. KEYCTL_DESCRIBE looks up the key, saves key->type->name in the
kasprintf() arguments and completes the first formatting pass.
2. While the formatter is delayed before its second pass,
af_rxrpc_exit() calls unregister_key_type(), which removes the type
from the registry and waits for key_gc_keytype().
3. The collector takes key->sem for writing, retypes the retained key
to key_type_dead and completes retirement. Unregistration and module
exit return, allowing free_module() to release the type and name.
4. The formatter resumes its second pass and reads the saved name from
released module storage, which can fault in string().
Hold key->sem for reading across kasprintf(). The collector then cannot
retype the key or complete retirement until both formatting passes have
finished. If retirement wins the lock first, formatting uses the core
key_type_dead name instead. Release the semaphore immediately after
kasprintf(), including on allocation failure, before copying to
userspace.
Oops report as below:
BUG: unable to handle page fault for address: fffffbfff8054794
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
RIP: 0010:string+0x23f/0x470
Call Trace:
vsnprintf+0x330/0x1110
-
CVE-2026-99218
•
published on November 2, 2026
In the Linux kernel, the following vulnerability has been resolved:
coredump: hold RCU while releasing parked threads
coredump_finish() releases the parked threads by clearing -task in
their core_thread entry and calling wake_up_process() on each of them.
It does that without holding a reference on the task and without being
inside rcu.
But calling wake_up_process(task) without rcu here isn't safe. A parked
thread doesn't need that wakeup to leave. A spurious wakeup or a
preemption after the store is enough for the task to go away.
So if the coredump client is preempted between the store and
wake_up_process() the thread can exit and be freed in the meantime and
try_to_wake_up() takes pi_lock in freed memory.
Hold rcu across the loop.
-
CVE-2026-99201
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
netlink: avoid hashing the network namespace pointer
The netlink rhashtable key includes a raw struct net pointer and a
user-controlled port ID. Both /proc/net/netlink and socket diagnostics
expose the table's bucket order. By binding and rebinding chosen
NETLINK_USERSOCK port IDs, an unprivileged reader can distinguish equal
buckets and recover the low bits of the Jenkins hash. Its 32-bit seed
and the limited set of kernel-image slides can then be searched offline
to recover the address of init_net.
Use the namespace's unique, non-address net_cookie in the comparison
key instead. It is assigned before the per-net initializers run and
remains unchanged for the namespace's lifetime. The lookup key and
object hash are still built by netlink_compare_arg_init(), keeping
lookup, insertion, removal and rehashing consistent while preserving
namespace separation. Neither public table walker needs to change.
Reading the socket's namespace cookie in netlink_compare() is safe
under RCU, including during namespace teardown. netlink_release()
removes the socket from the hash table and defers its final put with
call_rcu(). cleanup_net() runs the per-net exit methods and waits for
outstanding RCU callbacks with rcu_barrier() before freeing namespace
storage.
Unlike ns.ns_id, net_cookie is also available and initialized during
setup_net() in older stable kernels, making the change straightforward
to backport to v5.15 and later.
-
CVE-2026-99200
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: hisilicon: hisi_femac: Move setting of netops to fix crash
hisi_femac_drv_probe() connects the PHY before dev-netdev_ops is
assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads
dev->netdev_ops through netdev_need_ops_lock() since the commit in
question, so probing crashes with a NULL pointer dereference when
CONFIG_NET_SHAPER is enabled.
phy_link_topo_add_phy from phy_attach_direct+0xec/0x37c
of_phy_get_and_connect from hisi_femac_drv_probe+0x1f4/0x558
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash").
-
CVE-2026-99199
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: hisilicon: hip04_eth: Move setting of netops to fix crash
hip04_mac_probe() calls of_phy_connect() before ndev-netdev_ops is
assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads
dev->netdev_ops through netdev_need_ops_lock() since the commit in
question, so probing crashes with a NULL pointer dereference when
CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash").
-
CVE-2026-99194
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: aeroflex: move setting of netops to fix crash
greth_of_probe() calls greth_mdio_init(), which connects the PHY,
before dev-netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash").
-
CVE-2026-99193
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssm-prueth: Move setting of netops to fix crash
icssm_prueth_netdev_init() calls of_phy_get_and_connect() before
ndev-netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash").
-
CVE-2026-99185
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
firewire: core: fix race condition in split transaction handling
For a split transaction, either fw_core_handle_response() or
split_transaction_timeout_callback() may manipulate the same transaction
entry in the pending transaction list. The return value of timer_delete()
is used to determine which function handles the entry. If the transaction
is a split transaction and timer_delete() returns zero, the timeout
callback may already be running. In this case, the response handler must
leave the entry in the list for the timeout callback to remove.
A previous code refactoring broke this behavior, introducing a race
condition in which both functions could process the same transaction.
This could lead to a use-after-free on the transaction initiator side.
Fix the regression by ensuring that the response handler does not process
the transaction when timer_delete() returns zero. The timeout callback is
responsible for removing the entry from the pending transaction list.
-
CVE-2026-99180
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
unicode: free the map after a grace period
generic_ci_d_hash() and generic_ci_d_compare() read sb-s_encoding and
dereference the unicode map while a pathwalk in rcu mode holds nothing
but rcu_read_lock(). The filesystems that use them, ext4, f2fs and
tmpfs, drop the map with utf8_unload() from ->put_super(), which runs
when the last reference to the mount goes away. A lookup that is still
inside such a filesystem at that point reads a freed map.
With a pathwalk held up in utf8_casefold_hash() while the last reference
to a casefolded tmpfs goes away:
BUG: KASAN: slab-use-after-free in utf8nlookup+0x74c/0x950
Read of size 8 at addr ff110001030fe658 by task walker/98
Call Trace:
TASK>
utf8nlookup+0x74c/0x950
utf8byte+0x160/0x1560
utf8_casefold_hash+0x167/0x230
generic_ci_d_hash+0xdd/0x1c0
link_path_walk+0x11ad/0x1d30
path_lookupat+0x63/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
[...]
Allocated by task 94:
__kmalloc_cache_noprof+0x249/0x560
utf8_load+0x4e/0x570
shmem_parse_opt_casefold.isra.0+0x92/0x270
[...]
Freed by task 97:
kfree+0x1db/0x5b0
shmem_put_super+0x72/0x170
generic_shutdown_super+0x14c/0x530
kill_anon_super+0x3a/0x60
deactivate_locked_super+0x9c/0xf0
cleanup_mnt+0x9f/0x130
So far that has been hard to hit. umount(2) waits for a grace period
in namespace_unlock() before it drops the mount, so only a mount whose
last reference goes away elsewhere, like the close of a file or a chdir
out of a lazily unmounted directory, can race a walker. So it is
reachable.
Delay the free until a grace period has passed. The map and the data
table it holds a reference to then outlive any pathwalk that found the
superblock before the mount went away. The reference on the data table
module is dropped from the rcu callback as well. utf8-core is built in
whenever CONFIG_UNICODE is set, so there is no module exit that would
have to wait for the callbacks.
Overlayfs points the s_encoding of an overlay at the map of its first
layer without taking a reference of its own. That stays correct. The
layer is held by the overlay, so its map is dropped only after the
overlay is gone.
-
CVE-2026-99178
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
x86/kvm: Don't consume async #PF flags on a kernel #PF in NMI context
An async #PF "page not present" event arrives through the #PF vector,
and its reason sits in the per-CPU apf_reason.flags until
__kvm_handle_async_pf() reads and clears it. If an NMI arrives after
the event is injected and before the #PF handler reads the flags, and
the NMI handler itself takes a #PF, that fault reads and clears the
flags belonging to the #PF it interrupted. It then finds interrupts
disabled in the NMI context it interrupted, and panics:
Kernel panic - not syncing: Host injected async #PF in interrupt
disabled region
Call Trace:
NMI
panic+0x52/0x60
__kvm_handle_async_pf+0xb0/0xb0
exc_page_fault+0x71/0xb0
asm_exc_page_fault+0x27/0x30
RIP: 0010:__get_user_nocheck_8+0x6/0x20
perf_callchain_user+0x147/0x1a0
get_perf_callchain+0x12d/0x1c0
...
perf_event_nmi_handler+0x26/0x50
exc_nmi+0xe8/0x110
RIP: 0010:asm_exc_page_fault+0x0/0x30
The last RIP line shows the NMI landing on the first instruction of
the #PF entry. perf with user call chains takes such a fault: the
sampling NMI walks the user stack with __get_user(), which faults when
a saved frame pointer is not a valid user address or the walk runs off
the top of the stack. The same window exists when KVM, running as an
L1 hypervisor with DELIVERY_AS_PF_VMEXIT, reads the flags itself after
a #PF VM-exit.
The NMI entry code saves and restores CR2 for this nesting, but not the
async #PF reason. Andy Lutomirski described the race, with perf as the
example, when async #PF delivery was reworked in 2020 [1]. Saving and
clearing the flags across the NMI, next to CR2, was discussed there but
not merged.
Since that rework, Linux has stopped setting KVM_ASYNC_PF_SEND_ALWAYS,
so the host delivers "page not present" only for user mode faults and
a kernel-mode fault in NMI context (including kernel-mode #MC and #DB)
cannot be an async page fault. In that case, return without touching
the flags so that the interrupted handler finds them intact.
Tested on v7.3-rc5 in a 4-vCPU, 2 GiB guest restored from a snapshot
whose memory is served on demand through userfaultfd, so that reading
it back takes async #PFs, while every thread samples hardware cycles
with user call chains and points its frame pointer at an unmapped page.
Without this patch the guest panicked as above in 3 of 3 runs. With it,
the guest survived 3 of 3 runs of 60 seconds, and the host counted
148,441 to 153,334 kvm_async_pf_not_present events in the first 20
seconds of each. On 6.18.50 the results were the same: the guest
panicked without the patch and survived with it.
-
CVE-2026-99175
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
fsnotify: prevent mark additions during connector teardown
fsnotify_destroy_marks() keeps a reference to its current mark while it
drops conn-lock to destroy the mark. This stabilizes the forward-walk
cursor, but does not prevent a new mark from being inserted before it.
For example, an inotify watch re-added after IN_IGNORED sorts before the
old, detached mark for the same group. The walk can miss the replacement
and then detach the entire connector from the object.
The replacement is still on its group's marks_list and, for inotify, in
the watch IDR. The group mutex no longer protects the connector's object
from disappearing. An unprivileged fdinfo read racing the final detach
can consequently call igrab(NULL):
BUG: KASAN: null-ptr-deref in igrab+0x24/0x100
Write of size 4 at addr 0000000000000148
Call Trace:
igrab+0x24/0x100
inotify_show_fdinfo+0x1dc/0x5e0
seq_show+0x397/0x690
Set a DESTROYING flag under conn->lock before starting the walk, and
reject new marks on that connector with -ENOENT. The existing add-mark
error paths undo the temporary group-list entry and the backend's watch
allocation. Do not wait for teardown while holding the group mutex,
which the destroyer needs. Once the old connector is detached, an add
can install a fresh connector as before.
This closes the insertion race for all object types using the common
connector teardown, without changing the mark reference or SRCU lifetime
rules.
-
CVE-2026-99172
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
ipc: drop the mqueue mount with kern_unmount() on setup failure
mq_init_ns() creates the mqueue mount with fc_mount_longterm(), so its
-mnt_ns is MNT_NS_INTERNAL. When setting up the mqueue or ipc sysctls
or msg_init_ns() fails afterwards, create_ipc_ns() drops it with a plain
mntput(). With ->mnt_ns set that takes the fast path of
mntput_no_expire(). The count drops to zero and nothing ever kills the
mount, so the mount and the mqueue superblock are leaked.
Commit dc55e35f9e81 ("ipc: Store mqueue sysctls in the ipc namespace")
added the first failure path after mq_init_ns() and never dropped the
mount. Commit 7229d74e5e8c ("ipc: create_ipc_ns: drop mqueue mount on
sysctl setup failure") tried to fix that with a mntput() but that
doesn't help for a long-term mount.
Use kern_unmount(). free_ipc() open-codes the same thing for a namespace
that made it.
-
CVE-2026-99169
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
futex: Fix mm reuse handling for FUT_OFF_MMSHARED
A FUT_OFF_MMSHARED futex is a shared futex that refers to an MM.
It is possible for a process to wait on a shared futex with a different MM
because a FUT_OFF_INODE waiter can be requeued onto a FUT_OFF_MMSHARED
futex by another process.
This can cause FUT_OFF_MMSHARED waiters on a freed MM to consume
wakeups intended for a newly allocated MM at the same address.
Fix it by keying FUT_OFF_MMSHARED using a unique 64-bit per-MM ID.
Leave private futexes as before to avoid influencing the performance of the
hotpath.
(Multi-threaded processes typically implicitly use FUT_OFF_MMSHARED by
setting clear_child_tid such that it points into anonymous memory, which
causes mm_release() in a multi-threaded mm to perform FUTEX_WAKE.)
-
CVE-2026-99166
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: rds: fix uninitialized trans dereference in CM event handler
rds_rdma_cm_event_handler_cmn() assigns trans only when the RDMA
device is an InfiniBand CA (RDMA_NODE_IB_CA). On any other device
type, e.g. an iWARP RNIC such as siw, trans stays uninitialized, but
the event switch dereferences it: unconditionally in the
RDMA_CM_EVENT_CONNECT_REQUEST case via trans-cm_handle_connect(),
and (with a connection context) in the ROUTE_RESOLVED and
ESTABLISHED cases.
An RDS listener on an iWARP device therefore crashes the kernel as
soon as a connect request arrives: with CONFIG_INIT_STACK_ALL_ZERO
the wild load becomes a NULL dereference at offset 0xa0
(&trans->cm_handle_connect) in the iw_cm_wq workqueue.
GCC masks the bug in default builds by folding the uninitialized
load into &rds_ib_transport; Clang-built kernels take the real
uninitialized path and oops.
The active side can land on a non-IB device too: the id that
rds_ib_conn_path_connect() creates is not restricted to a node type,
so rdma_resolve_addr() binds it to whichever device serves the local
address, and an iWARP RNIC on the same netdev qualifies. The crash
there is different: resolving a route on an iWARP id never fills in
cm_id->route.path_rec, and the ROUTE_RESOLVED case writes
path_rec[0].sl before it calls into the transport.
The iWARP transport was dropped long ago and IB is the only
transport left, so make that explicit: initialize trans to
&rds_ib_transport at declaration, drop the conditional assignment,
reject a connect request that arrives on a non-IB device, and drop a
connection whose address resolved to one instead of resolving a
route on it. The rejection is limited to RDMA_CM_EVENT_CONNECT_REQUEST
on purpose: a non-zero return from the handler makes rdma_cm destroy
the id the event was delivered on, which is right for the request's
freshly created id but would free a connection id that RDS still owns
for any other event. On the active side the id stays ic->i_cm_id and
the connection's shutdown destroys it, so that case returns 0.
[achender: reject only on RDMA_CM_EVENT_CONNECT_REQUEST instead of
bailing out for every event on a non-IB device, so that rdma_cm does
not destroy connection ids RDS still tracks; drop a connection whose
address resolved to a non-IB device before a route is resolved on it;
changelog adjusted]
-
CVE-2026-99161
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
i2c: viai2c-wmt: Fix clock leak in wmt_i2c_probe()
In wmt_i2c_probe(), i2c-clk is acquired using of_clk_get(). If any
subsequent operation fails or when the module is unloaded, the clock
reference count is never decremented via clk_put(), leading to a
resource leak.
Switch to devm_clk_get() so that the clock is automatically managed
and released.
-
CVE-2026-99160
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Do not show buffer_meta for CPUs without a buffer
The per_cpu/cpuN/buffer_meta files are created for every possible CPU,
but buffer-buffers[cpu] is only allocated once that CPU comes online.
Reading the file of a CPU that never came online dereferences a NULL
cpu_buffer in rbm_start().
Fail the open with -ENODEV when the CPU has no buffer, as the other
per CPU ring buffer interfaces do.
-
CVE-2026-99159
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix the sub-buffer array base in rb_meta_subbuf_idx()
On a persistent ring buffer, rb_meta_subbuf_idx() can return an index one
sub-buffer too high. rb_setup_ids_meta_page() then fills subbuf_ids[]
shifted by one and leaves subbuf_ids[0] NULL, which __rb_map_vma()
dereferences when userspace maps trace_pipe_raw. rb_update_meta_reader()
writes two such indices into meta-buffers[], which rb_cpu_meta_valid()
would reject on the next boot, discarding the previous boot's trace.
A CPU's sub-buffer array starts after its meta header and the nr_subbufs
integers that follow, aligned up to a sub-buffer. rb_meta_subbuf_idx()
inverts that calculation but skips only the integers, not the header, so
its base is one sub-buffer low whenever the omitted header size crosses
the alignment boundary.
Invert the calculation with rb_subbufs_from_meta() rather than repeating
it. rb_range_buffer() maps an index back to an address through the same
helper, so the two directions can no longer disagree.
-
CVE-2026-99156
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
scsi: st: Fix use-after-free race between st_remove() and st_open()
st_remove() drops the probe reference on the scsi_tape with kref_put()
and only afterwards removes its index from st_index_idr. If that was the
last reference, scsi_tape_release() frees the structure while it is
still published in the idr.
scsi_tape_get(), called from st_open(), looks up the tape in
st_index_idr and takes a reference under st_ref_mutex and
st_index_lock. remove_cdevs() does not wait for opens that are already
past chrdev_open(), so an open that is blocked on st_ref_mutex while
st_remove() holds it can take the mutex as soon as st_remove() drops it,
find the freed tpnt in the idr and call kref_get() on it:
BUG: KASAN: slab-use-after-free in st_open
Write of size 4 ...
st_open (drivers/scsi/st.c:254 drivers/scsi/st.c:1291)
chrdev_open
...
Freed by task ...:
kfree
st_remove (drivers/scsi/st.c:4512)
Remove the index from the idr before dropping the reference, all under
st_ref_mutex. A concurrent scsi_tape_get() now either runs first and
holds a valid reference that keeps the tape alive, or runs afterwards
and finds nothing, so st_open() fails with -ENXIO.
This restores the ordering st_remove() had before the conversion to
st_index_idr, where the tape was unpublished from scsi_tapes[] before
the final kref_put().
-
CVE-2026-99154
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi: Reject a negative task index from parse_pdu_itt
A transport that implements parse_pdu_itt hands libiscsi an index taken
from the PDU, and both lookups bound it from above only:
if (i = session->cmds_max)
i and cmds_max are both int, so a negative index passes and
session->cmds[i] is read from before the array.
be2iscsi produces one. beiscsi_parse_pdu() assigns the raw tag,
*index = (int)itt;
and beiscsi_complete_pdu() forwards an unsolicited NOP-In from the
hardware async ring without replacing its ITT, so the value is the
target's. It also reports the session's own age rather than the one in
the tag, which leaves the age comparison in iscsi_verify_itt() with
nothing to reject.
Bound the index from below in both lookups.
-
CVE-2026-99151
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL sink dereference in USB4 bandwidth functions
allocate_usb4_bandwidth_for_stream() and allocate_usb4_bandwidth() both
use ASSERT(stream-sink) before dereferencing stream->sink->link. ASSERT
is compiled out in production builds, so a NULL stream->sink causes a
NULL pointer dereference.
link_set_dpms_off() already guards two earlier accesses to stream->sink
with explicit NULL checks, confirming that stream->sink can legitimately
be NULL. The subsequent call to deallocate_usb4_bandwidth() had no
equivalent guard.
Replace the ASSERT() calls with proper NULL checks that return false
early, and add a matching stream->sink guard at the call site in
link_set_dpms_off() consistent with the surrounding pattern.
v2: Keep the existing ASSERT() calls for diagnostics (to report
unexpected NULL sink), and add explicit NULL checks that return false
before dereferencing stream->sink. Also add a matching stream->sink
guard at the deallocation call site in link_set_dpms_off(). (Alex)
(cherry picked from commit 98029a0ce61feb52c563f65349dd9b25f672e355)