-
CVE-2026-99149
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix GEM object leak on ENOMEM in userptr ioctl
When amdgpu_hmm_range_alloc() fails amdgpu_gem_userptr_ioctl() returns
-ENOMEM right away and skips the cleanup every other error path goes
through. The GEM object, the bo-parent reference on the VM root and the
MMU notifier registration are all left behind.
Use release_object here, not user_pages_done, range is still NULL at
this point.
(cherry picked from commit bbe739e407a542073ec1a7872b14843566b4919e)
-
CVE-2026-99148
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: keep the eviction fence until the last handle is closed
amdgpu_gem_object_close() detaches the user queue eviction fence from
the BO before it checks bo_va-ref_count, so closing any handle of a BO
removes the fence, even when the file still has another handle to the
BO and the bo_va with its GPU mappings stays. The BO can then be evicted
without suspending the user queues of the file, which keep accessing it
through mappings that are only marked for update.
Seen on navi31 with a SDMA user queue: a BO opened twice in the same
file (GEM_FLINK + GEM_OPEN) loses its eviction fence when the second
handle is closed (traced attach/detach of the fence):
attach bo=ffff8c78a6c84c00
GEM_CLOSE handle=7
detach bo=ffff8c78a6c84c00
while handle 6 and the mapping are still in use.
Only detach the fence when the last reference to the bo_va goes away,
matching amdgpu_gem_object_open(), which attaches it only when the
bo_va is created. With this the fence stays until the file is closed.
(cherry picked from commit 8387982f03d4026b7dc11b0b5e3118298eee4d6a)
-
CVE-2026-99140
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix hist trigger timestamps for buffered events
Syzkaller triggered a WARN_ON_ONCE(!nest) warning:
WARNING: kernel/trace/ring_buffer.c:821 at ring_buffer_event_time_stamp
Call trace:
ring_buffer_event_time_stamp
hist_field_timestamp
hist_fn_call
event_hist_trigger
event_triggers_call
__event_trigger_test_discard
trace_event_buffer_commit
do_trace_event_raw_event_sched_switch
trace_event_raw_event_sched_switch
The warning is probabilistically reproducible and is related to syzkaller
executing the following commands:
echo 'prev_pid == 999999' events/sched/sched_switch/filter
echo 'hist:keys=common_timestamp' > events/sched/sched_switch/trigger
The specific triggering process is as follows:
CPU 0 CPU 1
(context switching) (echo 'hist:keys=common_timestamp' > \
events/sched/sched_switch/trigger)
do_trace_event_raw_event_##call
trace_event_buffer_lock_reserve
if (!tr->no_filter_buffering_ref &&
trace_file->flags & EVENT_FILE_FL_FILTERED)
return entry; // return directly
event_hist_trigger_parse
hist_register_trigger
tracing_set_filter_buffering(file->tr, true);
tr->no_filter_buffering_ref++;
__trace_buffer_lock_reserve
rb_start_commit
local_inc(&cpu_buffer->committing); // skipped and not executed
trace_event_buffer_commit
__event_trigger_test_discard
event_triggers_call
event_hist_trigger
hist_fn_call
hist_field_timestamp
ring_buffer_event_time_stamp
nest = local_read(&cpu_buffer->committing);
WARN_ON_ONCE(!nest) // trigger warning
The root cause is that when an event file has a filter attached and the
hist trigger has not yet been attached, trace_event_buffer_lock_reserve()
writes the event into the per-CPU trace_buffered_event temp buffer instead
of reserving it in the ring buffer, so cpu_buffer->committing is not
incremented. When the event is later processed at commit time by a hist
trigger, hist_field_timestamp() -> ring_buffer_event_time_stamp() sees a
zero committing count, triggering WARN_ON_ONCE(!nest).
tracing_event_time_stamp() was added by commit d8279bfc5e959 ("tracing:
Add tracing_event_time_stamp() API") for exactly this case: if the event
is the per-CPU trace_buffered_event, it returns the current ring buffer
timestamp. But it never gained a caller. Use it in hist_field_timestamp(),
so that a hist trigger that races onto a buffered event records the
current time, which is only marginally later than when the event was
recorded, instead of warning and recording a bogus timestamp.
-
CVE-2026-99129
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
selinux: fix BPF token permission checks
Avoid multiple lookups of the bpffs creator SID using the token's file
descriptor when the same information can be found via the resolved
path/dentry (in selinux_bpf_token_create()) or the token itself (in
selinux_bpf_map_create() and selinux_bpf_prog_load()). Not only does
this simplify the code, it avoids potential TOCTOU issues if the user
changes the token file descriptor passed into the kernel.
-
CVE-2026-99128
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
sctp: validate chunk length in the inqueue parser
SCTP chunks always include a four-byte generic header, but
sctp_inq_pop() currently accepts shorter declared lengths. A zero-length
chunk leaves chunk_end at the current header.
When ASCONF is covered by the association's SCTP-AUTH policy,
sctp_assoc_bh_rcv() can continue before the state machine performs its
normal chunk-length check. sctp_inq_pop() then returns the same malformed
chunk repeatedly and the receive softirq can lock up.
A remote SCTP peer can trigger this after establishing an association on
a kernel built with CONFIG_IP_SCTP and configured with
net.sctp.addip_enable=1 and net.sctp.auth_enable=1. The reproducer did
not require application credentials, a shared SCTP AUTH key, or
net.sctp.addip_noauth_enable=1.
On commit f967455fb2a5 ("seg6: reset IP6CB after IPv6 decapsulation"),
one zero-length ASCONF caused repeated
watchdog soft-lockup reports in a two-vCPU KVM guest. All 3 pre-trigger
health probes succeeded, while 36 of 37 post-trigger probes failed. With
this change, all 37 post-trigger probes succeeded and no equivalent
soft-lockup signature appeared.
Reject chunks shorter than the generic SCTP header at the shared inqueue
parser boundary. Mark the packet for discard before either caller can
continue processing it, while preserving the four-byte generic minimum.
Declared-length 1 through 4 controls and kernel-generated ASCONF traffic
remained healthy. The patched sctp_hello selftest passed for IPv4 and
IPv6.
The complete private reproducer and validation evidence are available
directly to maintainers on request.
-
CVE-2026-99121
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
ipv4: avoid divide by zero in fib_rebalance
fib_rebalance() computes the total eligible nexthop weight in one pass
and programs upper bounds in a second pass. A concurrent change to
ignore_routes_with_linkdown can make the first pass return zero while
the second pass sees an eligible nexthop, resulting in division by zero.
If the first pass reports a zero total, set each nexthop upper bound to
-1 and skip the division. This matches the IPv6 fix in commit
d2c26c2911dd ("ipv6: avoid divide by zero in rt6_multipath_rebalance")
and preserves the lock-free rebalance path.
-
CVE-2026-99115
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fill in FileSysIdentifier in FS_POSIX_INFORMATION
smb2_get_info_filesystem() reports 56 bytes for FS_POSIX_INFORMATION,
that is the whole of FILE_SYSTEM_POSIX_INFO, but never assigns
FileSysIdentifier. Those eight bytes go to the client as they are found
in the response buffer.
The buffer is zeroed on allocation, so a standalone request leaks
nothing. A compound request can leak: the offset of the next response
is advanced by the length pinned for the previous one, so a reply that
was written into the buffer and then dropped in favour of the short
error response of smb2_set_err_rsp() stays there, and the next reply is
laid over it with only the header cleared.
Report the file system id statfs() returned, which is what the field is
for. FileSysIdentifier is __le64 and f_fsid is a pair of ints, so
assemble the value first, val[0] as the low half, and convert it on the
way out.
-
CVE-2026-99105
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix stall when a task enqueued with SCX_ENQ_LAST lands back on its CPU's local DSQ
With SCX_OPS_ENQ_LAST, the last runnable task on a CPU is passed to
ops.enqueue() instead of being kept running. Exiting tasks without
SCX_OPS_ENQ_EXITING, migration disabled tasks without
SCX_OPS_ENQ_MIGRATION_DISABLED and tasks on an offline rq skip ops.enqueue()
and go straight to the local DSQ. This happens in put_prev_task_scx() after
the pick has settled on idle, so nothing reschedules the CPU, which idles
with the task queued until an unrelated wakeup lands on it or the watchdog
fires.
scx_mitosis, which sets SCX_OPS_ENQ_LAST without SCX_OPS_ENQ_EXITING, hit
this during mass cgroup teardown: exiting tasks stuck in exit_mmap() for
over 40 seconds.
A task put on the local DSQ runs, as anywhere else. If the SCX_ENQ_LAST
enqueue left the task on this CPU's local DSQ, set need_resched on the task
being switched in, as proxy_resched_idle() does. resched_curr() would flag
the task being put instead, and __schedule() clears that right after the
pick.
-
CVE-2026-99103
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
workqueue: Fix unbound pool lifetime for pending pwqs
KASAN reports a use-after-free of an unbound worker_pool in
node_activate_pending_pwq():
BUG: KASAN: slab-use-after-free in _raw_spin_trylock+0x6d/0x120
Read of size 4 at addr ffff8880089ce000 by task kworker/u22:0/318
CPU: 1 UID: 0 PID: 318 Comm: kworker/u22:0 Not tainted 7.2.0 #1 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: 0x0 (flush-8:0)
Call Trace:
TASK
dump_stack_lvl+0x53/0x70
print_report+0xce/0x610
kasan_report+0xce/0x100
_raw_spin_trylock+0x6d/0x120
pwq_dec_nr_in_flight+0x4b4/0xcb0
process_one_work+0x921/0x11a0
worker_thread+0x4d0/0xd20
kthread+0x2de/0x3c0
ret_from_fork+0x3aa/0x620
ret_from_fork_asm+0x1a/0x30
Allocated by task 311:
alloc_pwq+0x439/0xca0
apply_wqattrs_prepare+0x75e/0xd10
apply_workqueue_attrs_locked+0x44/0xa0
wq_nice_store+0x350/0x450
Freed by task 0:
kfree+0x127/0x3b0
rcu_core+0x523/0x1780
handle_softirqs+0x1b3/0x610
Last potentially related work creation:
put_unbound_pool+0x3f3/0x7d0
pwq_release_workfn+0x494/0x8e0
kthread_worker_fn+0x1ff/0x790
Canceling the last inactive work skips pwq_dec_nr_active(), so an empty
pwq can remain on pending_pwqs when its refcnt reaches zero.
pwq_release_workfn() currently puts the pool before removing that pwq.
If this drops the last pool reference, the pool can be RCU-freed while
the pwq remains reachable, and node_activate_pending_pwq() may trylock
the freed pool->lock.
Remove the pwq from pending_pwqs before putting the pool.
-
CVE-2026-99102
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
ntfs: take invalidate_lock in ntfs_setattr_size()
ntfs_setattr_size() updates i_size and resizes the on-disk attribute
without holding mapping-invalidate_lock. Page faults take the lock
shared, so a fault racing the resize can resolve a VCN against the
transient runlist state of ntfs_non_resident_attr_expand() and fail
with a spurious SIGBUS, and can interleave with the size-change
epilogue (truncate_pagecache(), i_size_write(),
pagecache_isize_extended()).
Take invalidate_lock exclusively around the whole resize after
inode_dio_wait(), matching the fallocate path and other filesystems
such as xfs, which wraps truncate in its mmaplock (= invalidate_lock).
-
CVE-2026-99101
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
ntfs: move attribute payload before shrinking its record
ntfs_new_attr_flags() resizes the non-resident attribute record before
moving its name and mapping pairs to their shorter-header offsets when
compression or sparse state is cleared.
Shrinking the record first moves the following attribute over the tail of
the old record. The subsequent memmove() therefore copies bytes from that
following attribute instead of the old mapping pairs. Re-enabling
compression on an empty file persists those bytes as a malformed mapping
pairs array, which ntfsck reports as a missing or invalid run length.
Move the payload before shrinking the record, while retaining the existing
resize-before-move ordering when growing it.
-
CVE-2026-99091
•
published on October 26, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix status of pending commands flushed on power off
cmd_complete_rsp() receives a struct cmd_lookup and, for a pending
command that has no cmd_complete callback, falls through to
cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so
the status sent comes from the first byte of match-sk's
representation, not from match->mgmt_status.
commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on
mgmt_index_removed") changed the callers' data from &status to &match
and updated the cmd_complete branch to match->mgmt_status, but left
the fall-through passing data unchanged.
In mgmt_index_removed() match->sk is NULL, so every such command is
answered with status 0x00 (Success) instead of
MGMT_STATUS_INVALID_INDEX. In __mgmt_power_off() it is NULL too,
unless a Set Powered command was pending: then settings_rsp() has
stored that command's socket in match->sk, and the byte sent comes
from the socket pointer. Either way the status the caller set,
MGMT_STATUS_NOT_POWERED (or MGMT_STATUS_INVALID_INDEX when the device
is being unregistered), is lost.
Pass the status the callers set.
This was seen on a QCA9377 laptop: bluetoothd's Start Discovery,
pending when the adapter was powered off, was answered with Command
Status 0x00 and no parameters, and bluetoothd 5.72 crashed on the
zero-length success. BlueZ master has since added the length check
on that path ("adapter: Fix crash on short start discovery reply",
BlueZ a734b06059cb), but userspace should still be told Not Powered,
not Success.
Tested on Ubuntu 7.0.0-31 with a virtual controller (hci_vhci):
power off is held in HCI Write Scan Enable while a Start Discovery is
submitted, and the flush answers it with status 0x00 before this
change and 0x0f (Not Powered) after.
-
CVE-2026-99089
•
published on October 26, 2026
In the Linux kernel, the following vulnerability has been resolved:
ASoC: samsung: i2s: enable op_clk in probe to balance runtime PM
The probe function puts the device into the runtime PM active state with
only the "iis" bus clock enabled, but it also sets priv-op_clk to the
parent of the RCLK_SRC mux without enabling it. The runtime PM suspend
callback disables both clocks, so the first runtime suspend after probe
disables op_clk once more than it was enabled.
On Exynos5250 Arndale both clocks resolve to the same EXYNOS_I2S_BUS gate,
so this triggers the following warning during boot:
WARNING: drivers/clk/clk.c:1270 at clk_core_disable+0xe4/0x23c, CPU#0: kworker/u8:3/45
i2s_bus already disabled
...
Workqueue: pm pm_runtime_work
Call trace:
...
clk_core_disable from clk_disable+0x28/0x34
clk_disable from i2s_runtime_suspend+0x58/0x68 [snd_soc_i2s]
i2s_runtime_suspend [snd_soc_i2s] from genpd_runtime_suspend+0xc4/0x298
genpd_runtime_suspend from __rpm_callback+0x48/0x18c
__rpm_callback from rpm_callback+0x4c/0x50
rpm_callback from rpm_suspend+0xf4/0x718
rpm_suspend from pm_runtime_work+0x9c/0xa0
...
Fix this by enabling op_clk in probe right after getting it, so the clock
state matches the runtime PM active state, and by disabling it in remove.
-
CVE-2026-99088
•
published on October 26, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: validate transport header presence in set_ipv6_addr
When executing IPv6 address rewrite actions on IPv6 fragments,
set_ipv6_addr() calls update_ipv6_checksum(). If parse_ipv6hdr()
processes a non-first IPv6 fragment, it sets key-ip.proto to
NEXTHDR_FRAGMENT and returns early without calling
skb_set_transport_header().
update_ipv6_checksum() unconditionally evaluates skb_transport_offset()
on entry before checking l4_proto. Because skb->transport_header is
uninitialized, this triggers a warning under CONFIG_DEBUG_NET=y although
it is completely harmless.
Fix this by returning early in update_ipv6_checksum() if l4_proto is
NEXTHDR_FRAGMENT. This avoids reading the uninitialized transport offset
for fragments while preserving the debug warning for any other protocol
where the transport header is unexpectedly missing.
See the syzbot trace:
!skb_transport_header_was_set(skb)
WARNING: ./include/linux/skbuff.h:3075 at skb_transport_header include/linux/skbuff.h:3075 [inline], CPU#1: syz-executor463/5635
WARNING: ./include/linux/skbuff.h:3075 at skb_transport_offset include/linux/skbuff.h:3250 [inline], CPU#1: syz-executor463/5635
WARNING: ./include/linux/skbuff.h:3075 at update_ipv6_checksum net/openvswitch/actions.c:361 [inline], CPU#1: syz-executor463/5635
WARNING: ./include/linux/skbuff.h:3075 at set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399, CPU#1: syz-executor463/5635
[...]
RIP: 0010:skb_transport_header include/linux/skbuff.h:3075 [inline]
RIP: 0010:skb_transport_offset include/linux/skbuff.h:3250 [inline]
RIP: 0010:update_ipv6_checksum net/openvswitch/actions.c:361 [inline]
RIP: 0010:set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399
[...]
Call Trace:
TASK>
set_ipv6 net/openvswitch/actions.c:531 [inline]
do_execute_actions+0x557e/0x8600 net/openvswitch/actions.c:1366
ovs_execute_actions+0xde/0x520 net/openvswitch/actions.c:1592
ovs_packet_cmd_execute+0xb4f/0xf10 net/openvswitch/datapath.c:705
genl_family_rcv_msg_doit+0x233/0x340 net/netlink/genetlink.c:1114
genl_rcv_msg+0x614/0x7a0 net/netlink/genetlink.c:1209
netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2572
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1218
netlink_unicast+0x7bd/0x940 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec+0x14e/0x190 net/socket.c:800
-
CVE-2026-99086
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: validate the superblock on resume
dm_integrity_resume() re-reads the superblock from the device so that it
picks up the flags and the recalculate position. It performs no
validation on the result, while the constructor validates the superblock
it reads and sizes all the in-memory structures according to it. The user
may modify the superblock on the underlying device while the dm-integrity
device is suspended, so that the two no longer agree.
In particular, access_journal_data() shifts the journal entry index by
ic-sb->log2_sectors_per_block, while ic->journal_section_sectors and the
journal page list were computed with the value that was present at
constructor time. Increasing log2_sectors_per_block makes the index run
past the end of the journal, and dm-integrity then writes 512 bytes
through lowmem_page_address(NULL).
Snapshot the validated superblock in the constructor and refuse to resume
if any of the fields that describe the on-disk geometry changed.
-
CVE-2026-99084
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
readdir: take no inode lock on an immutable directory
iterate_dir() takes the directory's i_rwsem shared and holds it across
-iterate_shared(). For a directory that never has an entry and is
never removed the lock keeps nothing still, it only orders every reader
and every writer of that inode behind each other.
For the directory of a nullfs instance that matters. The instance of
the initial mount namespace is the root of every empty mount namespace
and the private instance is the root of every kernel thread, so one
inode is shared across users who have nothing else in common. And a
reader can hold the lock for as long as it likes: back the getdents()
buffer with a mapping of a file on a FUSE mount of your own, let the
copy of "." and ".." fault and let the server wait. Queue an exclusive
taker behind it, a mkdir() in that directory goes through start_dirop()
before the read-only mount is reported, and from then on every lookup
that misses the dcache in that directory, every create and every mount
on it waits until the server answers. One user of an empty mount
namespace stalls all the others.
Add FOP_IMMUTABLE for the file operations of a directory that never
changes and is never removed and let iterate_dir() skip the lock for
it. The flag never changes for a file, ->f_pos is protected by
f_pos_lock since directories are FMODE_ATOMIC_POS, IS_DEADDIR can't be
set on such a directory and neither touch_atime() nor fsnotify take
i_rwsem. Set it on the nullfs directory. The placeholder directories of
libfs never have an entry either but their owners remove them, so they
keep the lock.
-
CVE-2026-99083
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix heap out-of-bounds write in krb5_authenticate()
In krb5_authenticate(), out_len is calculated to determine available
headroom in response_buf for the incoming Kerberos AP-REP token. However,
when SMB2_SESSION_SETUP is processed as a non-first element of a compounded
SMB2 request, the calculation omits work-next_smb2_rsp_hdr_off.
This causes out_len to overstate remaining buffer headroom by
the cumulative size of prior responses in the compound chain. Consequently,
the length check in ksmbd_krb5_authenticate()
(*out_len = resp->spnego_blob_len) passes erroneously, allowing memcpy()
to write the AP-REP blob past the end of response_buf into adjacent kernel
heap memory.
Fix this by subtracting work->next_smb2_rsp_hdr_off when computing out_len,
ensuring it accurately reflects physical remaining buffer space.
-
CVE-2026-99082
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Use active memslots for the per-vCPU MMIO cache
KVM tags the per-vCPU MMIO cache with a memslot generation so that a
memslot update invalidates cached MMIO information. Both the fill and
validation paths use kvm_memslots(), which unconditionally selects address
space 0, even when the vCPU is running in SMM and using address space 1.
Commit 56f17dd3fbc4 ("kvm: x86: fix stale mmio cache bug") added the
memslot generation to the cache key so that a memslot update could not
leave a stale entry valid. When commit 699023e23965 ("KVM: x86: add SMM
to the MMU role, support SMRAM address space") added the SMM address space,
these helpers were not converted to use the active memslots.
Consequently, an update to the SMM memslots can leave an entry from the old
SMM address space apparently valid after the vCPU returns to the normal
address space. A guest can then cause an access to valid RAM at the same
GFN to be returned to userspace as KVM_EXIT_MMIO.
Completing that exit through the VMM's RAM address space writes the backing
page without going through KVM's write-tracking path. If the page backs a
nested EPT table, KVM can continue using shadow translations derived from
the old contents. The WARN_ON_ONCE() in kvm_mmu_write_protect_fault()
catches this invalid cache and memslot combination.
Use the vCPU's active memslots when caching and validating the entry.
Memslot generations are unique across address spaces, so the generation
also distinguishes the normal and SMM views. This matches the MMIO SPTE
cache, which already uses kvm_vcpu_memslots().
On an unpatched current-mainline kernel, a regression test that fills the
cache in SMM and updates only the SMM memslots fails the intended RAM write
and triggers the kvm_mmu_write_protect_fault() warning. With this change,
the same test completes the RAM write without a warning. The x86/smm_test,
set_memory_region_test, and memslot_modification_stress_test selftests also
pass.
-
CVE-2026-99073
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
ipv4: stop exception dump when nexthop group shrinks
Commit 4ce5dc9316de ("inet: switch inet_dump_fib() to RCU
protection") allowed IPv4 FIB dumps to run concurrently with nexthop
replacement.
fib_dump_info_fnhe() uses fib_info_num_path() as the loop bound,
then fib_info_nhc() independently reloads nh-nh_grp. If
RTM_NEWNEXTHOP replaces a group with fewer paths between those loads,
fib_info_nhc() returns NULL and the dump dereferences it through
nhc_flags.
Stop the walk when the indexed path is absent. Nexthop groups are
dense, so the current snapshot has no later path.
-
CVE-2026-99069
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
Input: ati_remote2 - fix type confusion in device attribute handlers
Previously, the channel_mask and mode_mask attributes were registered on
the parent usb_device via sysfs_create_group(). When commit b20d6bf8014b
("Input: ati-remote2 - use driver core to instantiate device
attributes") converted the driver to let the driver core manage them via
dev_groups in struct usb_driver, the attributes moved to the bound
usb_interface devices, but the show and store callbacks were not updated
accordingly.
As a result, the callbacks still invoked to_usb_device() on a device
pointer belonging to a struct usb_interface, producing an invalid
usb_device pointer.
Use to_usb_interface() directly in the attribute handlers to obtain the
interface and its driver data.