-
CVE-2026-99002
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: validate pitch coming from userspace
Validate the pitch, alongside the box dimensions before trying
to copy data from the underlying surface. Fixes possible
out of bounds reads with cursor snooping.
-
CVE-2026-98994
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
statmount: read the parent of an unmounted mount under mount_lock
statmount_mnt_basic() reads the ids of the parent through m-mnt_parent
with namespace_sem held for reading. That's fine for a mount that is
in a namespace. Everything above it is pinned by that namespace.
STATMOUNT_BY_FD also accepts a file descriptor on a mount that has
been unmounted on purpose and that only the file descriptor keeps alive.
If that mount stayed attached to its parent when it was unmounted the
parent is unmounted as well and nothing pins it for the child.
The final mntput() unmounts the children under mount_lock alone and
frees the parent afterwards. Concurrently, statmount_mnt_basic() reads
m->mnt_parent twice while that can happen and can easily dereference a
mount that's already gone.
Read the parent of an unmounted mount under mount_lock. The parent
can't be put while it is held and both ids come from the same mount. A
mounted mount's parent is pinned by the namespace and a mount can't
leave its namespace while namespace_sem is held, so the common case
takes no global lock.
-
CVE-2026-98992
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
namespace: don't copy an unmounted mount tree
may_copy_tree() accepts a mount whose root is an nsfs or pidfs file
before it checks whether that mount is mounted. This exception exists
for nsfs and pidfs mounts. They are part of no mount namespace so
neither check_mnt() nor is_mounted() would let them through and
bind-mounting a nsfsfd or a pidfd wouldn't work.
Problem is that exception also admits a bind mount of such a file when
it was lazily unmounted and is only kept alive by a file descriptor:
mount --bind /proc/self/ns/net /tmp/x
exec 3 /tmp/x
umount -l /tmp/x
mount --rbind /proc/self/fd/3 /tmp/y
With MS_REC or AT_RECURSIVE copy_tree() doesn't stop at the unmounted
mount. It copies every mount that stayed attached to it as well. So if
you have a bunch of overmounts over the nsfsfd or the pidfd the whole
unmounted stack is copied. That's a bug.
So refuse to walk an unmounted tree. Copying its root alone stays
possible. So a bind mount of a namespace that is gone can still be
recreated from a file descriptor on the old one. The file descriptor
pins that mount and its root and __has_locked_children() only reads the
direct children which don't leave the parent's list without
namespace_sem. The internal mounts carry MNT_NS_INTERNAL instead of NULL
and are still walked. Copying an unmounted tree recursively fails with
EINVAL.
-
CVE-2026-98986
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
namespace: remove the fsnotify marks of a mount namespace in process context
mnt_ns_release() drops the last passive reference of a mount namespace
and removes its fanotify marks via fsnotify_mntns_delete(). That takes
the mutex of every group with a mark on the namespace and the spinlock
of the connector. Fine from process context. But mnt_ns_tree_remove()
hands the reference the namespace was allocated with to call_rcu() and
so the marks are removed from the RCU softirq:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:623
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/3
__mutex_lock+0x113/0x24b0
fsnotify_destroy_marks+0x11b/0x3d0
mnt_ns_release_rcu+0x57/0xa0
rcu_core+0x6b6/0x1e40
and lockdep complains about the connector lock being taken from softirq
context. A fanotify group with a FAN_MARK_MNTNS mark on the mount
namespace of another task is all that's needed. Root in a user
namespace can do that for a mount namespace it owns. The task exits and
the namespace is freed with the mark still on it.
Remove the marks in free_mnt_ns() before the namespace is handed to RCU.
That runs in process context once the last active reference is gone. A
mark is added through a file descriptor to the namespace which holds an
active reference so no mark can show up after that.
-
CVE-2026-98982
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
namespace: don't let a pseudo dentry become the root of a mount
d_alloc_pseudo() hands out dentries for pipes, sockets and other files
that are never anyone's child or parent. They carry DCACHE_NORCU and
dentry_free() frees them right away because no lockless path walk can
ever reach them. That holds as long as such a dentry isn't the root of
a mount. But bind mounting /proc/self/fd/fd of such a file does
exactly that.
Most callers of alloc_file_pseudo() put their files on kernel-internal
mounts and may_copy_tree() refuses those. bpf_token_create() doesn't. It
places the token file on the bpffs mount the caller handed it and that
mount is in the caller's mount namespace so the clone goes through:
mount --bind /proc/self/fd/
open_tree(tokfd, "", AT_EMPTY_PATH | OPEN_TREE_CLONE) + move_mount()
__follow_mount_rcu() then loads ->mnt_root of that mount, reads d_seq
and d_flags of the dentry and only then checks mount_lock. The dentry
can be gone by then. The final mntput() of an unmounted parent unhooks
a child that stayed attached to it under mount_lock alone. When the
child's holder does the final put right after that the root is dput()
and freed immediately while a walker that found the mount hashed still
looks at it.
Refuse to clone a mount with a DCACHE_NORCU dentry as its root. Nothing
sensible can be done with a bind mount of a bpf token anyway.
-
CVE-2026-98979
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
namespace: refuse an automount below a mount that is in no namespace
It's possible to add autmounts even when the parent mount isn't in the
mount namespace of the caller. The only requirement we have is that the
parent mount namespace must not be NULL, i.e., unmounted.
Problem is that clone_private_mount() has MNT_NS_INTERNAL which makes
that trivially true. So that passes the test and attach_recursive_mnt()
accepts that as a mount point and funny enough, count_mounts()
dereferences MNT_NS_INTERNAL. The problem is it is an error pointer...
So we can reach this in userspace via fanotify. A filesystem mark on the
lower filesystem of an overlay reports paths on the layer clone and
reading the event hands out a descriptor on it. For example with debugfs
as the lower layer it goes kaboom:
openat(evfd, "tracing", O_DIRECTORY)
Oops: general protection fault
KASAN: null-ptr-deref in range [0x1d0-0x1d7]
RIP: 0010:count_mounts+0x35/0x200
attach_recursive_mnt
finish_automount
And since that sleeping beauty happens under namespace_sem held for
writing every mount operation on the system blocks from then on.
Congrats.
Use is_mounted() instead which rejects unmounted and internal mounts
alike. The open fails with EINVAL just as it did before
clone_private_mount() used MNT_NS_INTERNAL.
-
CVE-2026-98978
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
namespace: never expire a locked mount
Locked mounts are special. They protect the underlying files and
directories from being revealed. do_umount() refuses to unmount locked
mounts but shrink_submounts() doesn't.
A shrinkable mount can become locked once the owner of a user namespace
puts it beneath a locked mount with MOVE_MOUNT_BENEATH. The locked
property now moves to the mount at the bottom making it possible to
unmount the top mount.
So umount() of an unlocked ancestor now expires the bottom mount first
and the covered directory is revealed:
move_mount(c - x/hidden, MOVE_MOUNT_BENEATH) = 0
the cover after the lock moved: umount2(x/hidden) = 0
the holder of the lock: umount2(x/hidden) = EINVAL
the root of the copy, busy: umount2(x) = EBUSY
reads x/hidden/secret: "covered-by-root"
So leave a locked mount alone as it dies together with its parent. A
plain umount() of an unlocked mount with a locked one below it is EBUSY
from now on. It's the same for any other locked child. A lazy umount
still takes the whole tree.
mark_mounts_for_expiry() never sees a locked mount. lock_mnt_tree()
leaves a mount on an expiry list alone and nothing else puts a locked
one on such a list. Add an assert for this.
-
CVE-2026-98976
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
namespace: keep the lock on a mount that a propagated copy is moved beneath
attach_recursive_mnt() transfers MNT_LOCKED from the top mount to the
mount that is moved beneath it with MOVE_MOUNT_BENEATH. This allows the
owner of a user namespace to replace its locked /proc or its root. The
mount beneath takes on the job of covering the underlying mountpoint
allowing the top mount to be unmounted.
Consider two mount namespaces:
(H) The host H has a shared mount P with a secret in P/d
(Z) Z is a user namespace made from M. Its copy of P receives
propagation from the host's P and its copy of M's cover on P/d is
locked Z's owner must not get to see P/d.
Now (H) mounts X on P/d. This propagates into (Z). The copy of X lands
beneath (Z)'s locked cover. The locked property is transfered from (Z)'s
cover to the copy of X propagated beneath it. The cover is now unlocked.
Now (H) unmounts X again. The copy of X in (Z) gets unmounted and the
covering mount is left unlocked on top of P/d. (Z) can now unmount it:
Z: umount2(P/d) = EINVAL /* the cover is locked */
H: mount X on P/d, umount X /* both propagate into Z /*
Z: umount2(P/d) = 0 /* the cover is now unlocked */
Z: read P/d/secret = "covered-by-root" /* secret revealed */
So only transfer the locked property to the mount beneath for mounts the
caller has placed. A propagated copy that lands beneath a locked mount
is locked as well so that the mount at the bottom of the stack carries a
lock the way every check expects. The mount on top of it remains locked
to ensure that it keeps covering even if the propagated mount is
unmounted again.
-
CVE-2026-98975
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
xfs: stop exchanging reflink flags when exchanging mappings
When an exchange covers both files from offset 0 to i_disk_size,
xmi_can_exchange_reflink_flags() assumes every mapping moved and hands
the reflink flag over to the other file.
That assumption is wrong. A file can still own shared blocks past
i_disk_size, e.g. after EXCHANGE_RANGE_TO_EOF sets a smaller size
without unmapping anything. The flag is cleared anyway, and the next
write to such a block happens in place instead of CoW, corrupting the
other file that shares it.
Commit a23eca88448e ("xfs: fix exchange-range reflink flag clearing
issue with INO1_WRITTEN") fixed one instance of this. Rather than add
another special case, stop moving the flags.
xfs_exchmaps_ensure_reflink() already sets the flag on both inodes
before the exchange, so both just keep it.
Nothing sets CLEAR_INO{1,2}_REFLINK anymore. Intents logged by older
kernels may still carry them; recovery already masks them off, so they
stay in the log format mask and are ignored.
XFS_IOC_SWAPEXT has the same problem: it moves the reflink flag from
one inode to the other along with the extents. Just removing that is
not enough here: the exchange path flags both inodes up front in
xfs_exchmaps_ensure_reflink(), but swapext has no such step, so the
inode receiving the shared extents would be left without the flag.
Set it on both inodes instead, and make sure both have a CoW fork,
since an inode with the reflink flag is expected to have one.
The flag now stays until FALLOC_FL_UNSHARE_RANGE, xfs_scrub, or a
truncate to zero removes it.
-
CVE-2026-98973
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: Fix unlocked list_del in drm_bridge_add()
When re-adding a bridge that was previously removed, drm_bridge_add()
drops it from bridge_lingering_list without holding bridge_lock.
Both bridge_list and bridge_lingering_list are protected by bridge_lock,
as they are concurrently modified by drm_bridge_remove() and
__drm_bridge_free(), and walked by the debugfs 'bridges' file. Running
the list_empty() test and the list_del_init() outside of the lock may
therefore corrupt either list.
Perform both under bridge_lock.
-
CVE-2026-98968
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
amt: send the relay's General Query directly from the receive path
An skb queued in a qdisc can outlive the tunnel it references
through a raw pointer in skb-cb. For example, with igmp_qrv set
to 1 on the relay a tunnel lives for 135s, so a netem delay of
180s on the amt device outlives it; when the tunnel expires and is
freed, the subsequent dequeue triggers a use-after-free in
amt_dev_xmit().
BUG: KASAN: slab-use-after-free in amt_dev_xmit+0x2763/0x2e20
Call Trace:
amt_dev_xmit+0x2763/0x2e20 [drivers/net/amt.c:1262]
dev_hard_start_xmit+0x22f/0x620
sch_direct_xmit+0x12e/0xac0
netem_dequeue+0x333/0xc50
net_tx_action+0x35c/0xa60
amt_send_igmp_gq() and amt_send_mld_gq() are only called from
amt_request_handler(), inside the rcu_read_lock_bh() section of
amt_rcv(). amt_request_handler() already has the tunnel the query is
for: it found or created it inside that section. Queuing the query with
dev_queue_xmit() only leads back into amt_dev_xmit(), which strips the
Ethernet header and calls amt_send_membership_query() for that tunnel.
Make that call directly from the two senders instead, the same way
amt_send_advertisement() transmits from the receive path. The query
never waits in a qdisc, the tunnel is only dereferenced inside the
RCU section that found or created it, and nothing is stored in
skb->cb, so no lookup or refcount is needed. Remove the query branch
of amt_dev_xmit(), amt_skb_cb() and struct amt_skb_cb, which have no
users left.
Behaviour changes:
- The relay's own General Queries no longer pass through the amt
device's egress path: its qdisc, tc egress (clsact/tcx), the
netfilter egress hook and packet taps. They are still visible as
UDP on the underlay.
- A query that is sent successfully is no longer counted as
tx_dropped. The old query branch left through the unlock label,
which counted every sent query as dropped.
- A query that reaches amt_dev_xmit() on a relay from elsewhere,
such as a userspace querier, is now dropped at the IGMP/MLD type
switch. Before, it trusted whatever skb->cb held, and a NULL
tunnel hit the WARN_ON(1).
-
CVE-2026-98965
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
ice: Restore Ordered MMIO Writes for Tx Doorbells
The DQL accounting state which tracks the number of bytes queued for the
NIC to transmit, namely dql-num_queued, is updated by the ICE driver
when it invokes __netdev_tx_sent_queue(). Subsequently the driver
updates the hardware queue tail allowing the NIC to begin processing the
work queue. The queue accounting update should be ordered before the NIC
begins transmitting descriptors.
The transmit path currently updates the hardware doorbell using
writel_relaxed(), which (on arm64) does not provide the same ordering
guarantees between writes to normal memory and writes to MMIO registers
that writel() does. This introduces a potential race where the NIC
begins transmitting descriptors before the dql->num_queued update is
globally visible. If the NIC finishes before the update is observed by
dql_completed(), it detects an invalid state where more bytes have been
completed than have been queued. When this happens the following BUG_ON
is triggered.
BUG_ON(count > num_queued - dql->num_completed);
This has been observed and manifests as the following crash (note that
the trace has been trimmed) in an environment with sustained network
load that uses an Intel Corporation Ethernet Controller E810-XXV for SFP
(rev 02) on an arm64 machine. Replacing writel_relaxed() with writel()
in a test kernel eliminated the crash in the user's workload, which
previously reproduced the issue reliably.
kernel BUG at lib/dynamic_queue_limits.c:99
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
pc : dql_completed+0x268/0x2a0
lr : ice_clean_tx_irq+0x1d4/0x620 [ice]
Call trace:
dql_completed+0x268/0x2a0 (P)
ice_napi_poll+0x94/0x520 [ice]
__napi_poll+0x48/0x3f0
net_rx_action+0x194/0x420
This restores the behaviour prior to commit ccde82e90946 ("ice: add E830
Earliest TxTime First Offload support"), which changed the notification
mechanism from writel() to writel_relaxed().
-
CVE-2026-98964
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
nvmet: use the local P2P device on metadata allocation failure
nvmet_req_alloc_p2pmem_sgls() assigns req-p2p_dev only after the data
and metadata SGL allocations succeed. If the data allocation succeeds
but the metadata allocation fails, out_free_sg passes req->p2p_dev to
pci_p2pmem_free_sgl() before that assignment has taken place.
Pass the local p2p_dev argument instead, so cleanup uses the same PCI
device as the successful data allocation.
-
CVE-2026-98960
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't stash io_uring encoded data across -EAGAIN
Returning -EAGAIN while leaving btrfs_uring_encoded_data in the cmd PDU
leaks if the request is cancelled or the ring exits before reissue.
io_uring does not free driver PDU allocations on cleanup.
Write: io_queue_sqe() always issues with IO_URING_F_NONBLOCK first, so
return -EAGAIN before allocating and free data on every exit.
Read: free on nowait -EAGAIN too; only -EIOCBQUEUED keeps the allocation
for btrfs_uring_read_finished().
-
CVE-2026-98955
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
flow_dissector: avoid u16 truncation of skb-len when computing thoff
__skb_flow_dissect() computes key_control->thoff using:
key_control->thoff = min_t(u16, nhoff, skb ? skb->len : hlen);
min_t(u16, ...) casts both arguments to u16 before comparing them.
Whenever skb->len (or hlen) modulo 65536 is smaller than nhoff, the
truncated length wins and thoff is set to a bogus small value, even
when the dissection succeeded. For example, an IPv4/TCP frame with
skb->len == 65540 and nhoff == 34 gets thoff == 4, so callers such as
skb_probe_transport_header() point the transport header inside the
Ethernet header.
Such skbs are not exotic:
- At the time of commit d0c081b49137 ("flow_dissector: properly cap
thoff field"), AF_PACKET with PACKET_VNET_HDR could already build GSO
skbs larger than 64KB (MTU checks are skipped for GSO, and
alloc_skb_with_frags() accepted up to MAX_SKB_FRAGS (17) order-0
pages on top of the linear part).
- BIG TCP now makes skbs larger than 64KB common.
- The following patch makes tun_get_user() dissect IFF_TAP frames
before eth_type_trans() pulls the Ethernet header, so a GSO frame
carrying a 65522..65535 byte L3 packet will be dissected with
skb->len in [65536, 65549].
Compare as u32 instead. If the resulting offset cannot be represented
in the u16 key_control->thoff, cap it to U16_MAX and report the
dissection as failed rather than silently returning a wrong transport
offset. thoff is still set on failure, as some callers (such as
eth_get_headlen()) use it regardless of the return value.
-
CVE-2026-98951
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
riscv: ptrace: Zero-initialize regset buffers before copyin
user_regset_copyin() only copies `count` bytes, so a PTRACE_SETREGSET
request with a short iov_len leaves the rest of the stack buffer
uninitialized. In riscv_vr_set() that garbage is validated and copied
into the target's vstate, and in riscv_cfi_set() it can be stored as
the target's shadow stack pointer. Zero both buffers, as the get path
already does.
-
CVE-2026-98945
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
HID: steam: Rearrange teardown sequence
This fixes a narrow window during the teardown sequence where callbacks
could still be scheduled during cleanup that would then have a dangling
pointer to the now-freed steam struct.
This also puts work canceling for rumble and mode switch in
steam_unregister, as that shouldn't persist while the client hdev is open.
-
CVE-2026-98939
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Drop unnecessary PMD page copy when freeing
On a box with a discrete GPU, lockdep reports a possible deadlock as
soon as kswapd shrinks the TTM page pool. The immediate cause is an
x86 commit that added an mmap_read_lock() to kernel page protection
munging code.
The huge vmap code holds the same lock over a GFP_KERNEL allocation,
which is a no-no now that reclaim can take it. That allocation is in a
page table *free* path and ends up being for dubious purposes[1].
Basically, it tries to avoid hardware setting Accessed=1 in page table
entries that are unreachable by the hardware, a non-issue.
Remove the PMD copy. Detach the original PMD page at the PUD, flush
the mid-level caches, and free the PTE tables straight from the
detached PMD page. With no allocation left, the locking issue is gone.
Lockdep splat/analysis:
WARNING: possible circular locking dependency detected
7.3.0-rc3-f6e7b42bf05b+ #183 Tainted: G U
------------------------------------------------------
kswapd0/269 is trying to acquire lock:
((init_mm).mmap_lock){++++}-{4:4}, at: change_page_attr_set_clr+0x29a/0x4a0
but task is already holding lock:
(pool_shrink_rwsem){.+.+}-{4:4}, at: ttm_pool_shrink+0xb2/0x330 [ttm]
Chain exists of:
(init_mm).mmap_lock -- fs_reclaim --> pool_shrink_rwsem
The cycle is built from three edges:
1) pool_shrink_rwsem -> (init_mm).mmap_lock
The TTM shrinker restores the caching attribute of every page it
frees, while holding pool_shrink_rwsem:
ttm_pool_shrink()
-> ttm_pool_dispose_list()
-> ttm_pool_free_page()
-> set_pages_wb()
-> change_page_attr_set_clr() [ init_mm mmap read lock ]
2) fs_reclaim -> pool_shrink_rwsem
The same shrinker, called from reclaim.
3) (init_mm).mmap_lock -> fs_reclaim
ioremap() installing a huge PUD mapping over an existing PMD table:
ioremap_page_range()
-> vmap_range_noflush()
-> vmap_try_huge_pud() [ init_mm mmap read lock ]
-> pud_free_pmd_page()
-> __get_free_page(GFP_KERNEL) [ enters reclaim ]
[ dhansen: Lots of changelog munging/trimming and merged comments from my
version of the fix. ]
-
CVE-2026-98934
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel()
Since commit d58e468b1112 ("flow_dissector: implements flow dissector
BPF hook") __skb_flow_dissect() needs a net pointer, either from
skb-dev, skb->sk, or since commit 3cbf4ffba5ee ("net: plumb network
namespace into __skb_flow_dissect") a caller provided pointer.
syzbot was able to reach seg6_make_flowlabel() with an skb having
neither skb->dev nor skb->sk set: a TIPC UDP bearer sends a discovery
message through an IPv4 route using seg6 encap, while
net.ipv6.seg6_flowlabel is set to 1.
seg6_make_flowlabel() already has a net pointer, use skb_get_hash_net().
WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126, CPU#0: syz.0.17/4930
Call trace:
__skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126 (P)
__skb_get_hash_net+0xe0/0x29c net/core/flow_dissector.c:1903
skb_get_hash include/linux/skbuff.h:1663 [inline]
seg6_make_flowlabel+0xcc/0x1ec net/ipv6/seg6_iptunnel.c:132
__seg6_do_srh_encap+0x320/0xbf4 net/ipv6/seg6_iptunnel.c:161
seg6_do_srh+0x4b4/0xa44 net/ipv6/seg6_iptunnel.c:431
seg6_output_core+0x164/0x688 net/ipv6/seg6_iptunnel.c:681
seg6_output+0x44/0x1ac net/ipv6/seg6_iptunnel.c:744
lwtunnel_output+0x3d0/0x664 net/core/lwtunnel.c:356
dst_output include/net/dst.h:470 [inline]
ip_local_out+0x110/0x148 net/ipv4/ip_output.c:131
iptunnel_xmit+0x50c/0xd38 net/ipv4/ip_tunnel_core.c:97
udp_tunnel_xmit_skb+0x220/0x348 net/ipv4/udp_tunnel_core.c:187
tipc_udp_xmit+0x75c/0x9c0 net/tipc/udp_media.c:202
tipc_udp_send_msg+0x214/0x374 net/tipc/udp_media.c:274
tipc_bearer_xmit_skb+0x260/0x3b0 net/tipc/bearer.c:576
tipc_enable_bearer net/tipc/bearer.c:366 [inline]
__tipc_nl_bearer_enable+0xc90/0xfb0 net/tipc/bearer.c:1048
tipc_nl_bearer_enable+0x2c/0x48 net/tipc/bearer.c:1057
genl_family_rcv_msg_doit+0x1e4/0x2d4 net/netlink/genetlink.c:1114
-
CVE-2026-98932
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
EDAC/altera: Fix use-after-free in error paths
In both altr_edac_a10_device_add() and altr_portb_setup(), the error path
freed the dci structure before releasing the devres group. Since the managed
single and double bit IRQ handlers use altdev(dci-pvt_info) as their data, an
IRQ firing between freeing dci and unregistering the IRQs could dereference
the freed memory.
Release the devres group first so the managed IRQs are unregistered
before the dci structure is freed.