-
CVE-2026-98930
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix IRQ injection with SIGP Stop and Store Status
When __inject_sigp_stop() is called for a Stop and Store Status
operation, if the vCPU is running, the interrupt is marked as pending
and the status is stored by the thread performing the KVM_RUN IOCTL.
If the vCPU is already stopped, the status is stored immediately.
Storing the status means writing into userspace, which might fault, and
__inject_sigp_stop() is called from do_inject_vcpu() which in turn is
always called holding a spinlock, which is obviously an issue.
Fix this by returning -EWOULDBLOCK from __inject_sigp_stop(), and
adding a bool flag to indicate whether a store status is needed. The
callers of do_inject_vcpu() are modified to pass the pointer to the
bool flag; whenever a Store Status operation is needed, the callers can
now perform it outside the spinlock.
Opportunistically refactor kvm_s390_set_irq_state() to use
scoped_guard() and __free().
[ Added Fixes tag while picking -- Claudio ]
-
CVE-2026-98920
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix missing alloc tagging of direct mempool allocations
Commit 1d78d56c43ef ("netfs: Fix folio_queue ENOMEM in writeback by
adding a mempool") added a mempool for the folio_queues and made the
request, subrequest and folio_queue allocations distinguish between
writeback and everything else. Writeback is part of memory reclaim
and must not fail due to ENOMEM, so it allocates under GFP_NOFS
through mempool_alloc(), which may dip into the pool's reserve and,
if that runs empty, wait for elements to be returned. The
GFP_KERNEL paths, which can return -ENOMEM to their callers, invoke
the pool's -alloc() callback directly instead.
The direct call, however, skips the alloc_hooks() wrapper that the
mempool_alloc() macro provides. The pool callbacks, mempool_alloc_slab()
and mempool_kmalloc(), call kmem_cache_alloc_noprof() and kmalloc_noprof()
and rely on current->alloc_tag having been set by the caller. With
CONFIG_MEM_ALLOC_PROFILING_DEBUG=y this leads to
current->alloc_tag not set
WARNING: ./include/linux/alloc_tag.h:161 at __alloc_tagging_slab_alloc_hook
alloc_tag was not set
WARNING: ./include/linux/alloc_tag.h:166 at __alloc_tagging_slab_free_hook
at allocation and free time respectively, as reported when reading
files on a CIFS mount. The allocations are also missing from
/proc/allocinfo.
Wrap the direct ->alloc() invocations in alloc_hooks() with a new
mempool_alloc_noreserve() helper in include/linux/mempool.h, next to
the other alloc_hooks()-wrapped macros such as mempool_alloc(). The
GFP_KERNEL paths keep their failable allocation semantics, they just
get tagged now.
-
CVE-2026-98918
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
mm/damon/ops-common: use a page-aligned address in damon_ptep_mkold()
__damon_va_prepare_access_check() picks a random byte address within the
region and stores it in r-sampling_addr. damon_va_mkold() passes it into
a page table walk, which hands it to damon_ptep_mkold() as the address of
the page to sample:
damon_va_mkold(mm, r->sampling_addr)
damon_va_walk_page_range(mm, addr, addr + 1)
damon_mkold_pmd_entry()
damon_ptep_mkold(pte, vma, addr)
ptep_test_and_clear_young(vma, addr, pte)
mmu_notifier_clear_young(mm, addr, addr + PAGE_SIZE)
For arm64, before commit 6f0e1142173a ("arm64: mm: support batch clearing
of the young flag for large folios"), the contpte helper walked exactly
CONT_PTES entries from the aligned-down page table pointer and used @addr
only to pass down to each entry, so an unaligned value was harmless:
ptep = contpte_align_down(ptep);
addr = ALIGN_DOWN(addr, CONT_PTE_SIZE);
for (i = 0; i CONT_PTES; i++, ptep++, addr += PAGE_SIZE)
Now the range to walk is derived from @addr instead: end = addr + nr *
PAGE_SIZE, rounded up to CONT_PTE_SIZE. For a sample in the last page of
a contpte block, the sub-page offset puts end just past the block
boundary, so the round-up lands a whole block further and the walk clears
PTE_AF in CONT_PTES entries beyond the sampled block. For the last block
in a page table page, those entries are past the end of that page, so the
walk writes into the page that follows.
Triggered by the full 7.1/7.2 kernel selftest suite on arm64 (EC2
c/m6g.4xlarge). The kernel sometimes crashes at or shortly after the
DAMON test.
What the overrun does depends on the page that happens to follow the page
table, so there is no single signature. If that page is read-only, the
write faults in the sampling path itself:
Unable to handle kernel write to read-only memory at virtual address ffff0003c5d2d000
FSC = 0x0f: level 3 permission fault
CM = 0, WnR = 1, TnD = 0, TagAccess = 0
CPU: 10 UID: 0 PID: 3487 Comm: kdamond.2
pc : contpte_test_and_clear_young_ptes+0x70/0xc0
lr : damon_ptep_mkold+0x1e8/0x1f8
Call trace:
contpte_test_and_clear_young_ptes+0x70/0xc0 (P)
damon_mkold_pmd_entry+0x150/0x170
walk_pmd_range+0x110/0x2b0
walk_pud_range+0x10c/0x208
walk_pgd_range+0x134/0x258
__walk_page_range+0x98/0x1b0
walk_page_range_vma_unsafe+0x90/0x148
walk_page_range_vma+0x28/0x40
damon_va_walk_page_range+0x114/0x2b8
damon_va_prepare_access_checks+0xec/0x1a8
kdamond_fn+0x534/0x770
kthread+0x128/0x138
ret_from_fork+0x10/0x20
Otherwise the page is writable, the PTE_AF clearing succeeds silently and
the damage only surfaces later, in whatever happened to own the page, so
the backtrace is unrelated to DAMON and differs between runs.
Pass a page-aligned address to the ptep_test_and_clear_young() call in
damon_ptep_mkold(), which is the only place DAMON can reach
contpte_test_and_clear_young_ptes() from. Nothing else sees the aligned
address, and r->sampling_addr itself is left as is, so the sampling and
region bookkeeping semantics are unchanged.
-
CVE-2026-98917
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
parisc: Increase kernel stack size to 32kb
For 64-bit Linux kernels, increase the default kernel stack size
(THREAD_SIZE_ORDER) to 32 kB, in order to avoid kernel crashes which have been
triggered recently when building the debian vtk9 package with gcc 17:
stackcheck: kworker/u128:0 will most likely overflow kernel stack (sp:179a83af0, stk bottom-top:179a80000-179a84000)
Kernel panic - not syncing: low stack detected by irq handler - check messages
CPU: 2 UID: 0 PID: 30760 Comm: kworker/u128:0 Tainted: G W 6.18.46-dirty #1 NONE
Tainted: [W]=WARN
Hardware name: 9000/800/rp3440
Workqueue: writeback wb_workfn (flush-259:0)
Backtrace:
[000000004022f050] show_stack+0x70/0x90
[<000000004022378c>] dump_stack_lvl+0x124/0x190
[<000000004022382c>] dump_stack+0x34/0x48
[<000000004020212c>] vpanic+0x204/0x648
[<00000000402025c4>] panic+0x54/0x58
[<0000000040232230>] do_cpu_irq_mask+0x3f8/0x440
[<0000000040227070>] intr_return+0x0/0xc
-
CVE-2026-98915
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
media: video-i2c: use vb2_video_unregister_device on driver removal
The driver uses vb2_fop_release() as its file release operation, so
vb2_video_unregister_device() should be used instead of
video_unregister_device() during driver removal.
This ensures that the vb2 queue is properly disconnected before the
video device is unregistered.
-
CVE-2026-98914
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: cap ATOM command table nesting depth
Cap nesting at 32 levels with execute_depth and
return -ELOOP when exceeded.
-
CVE-2026-98912
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: oss: Reject reads that cannot fit the next event
snd_seq_oss_read() checks whether the next queued OSS sequencer event
fits in the remaining userspace buffer before removing it from the read
queue.
The check is inverted. It currently stops when the event is smaller than
the remaining buffer, so a normal 4-byte event is not copied for an
8-byte read buffer. Conversely, an 8-byte event can be copied for a
smaller read count.
Break only when the remaining userspace buffer is smaller than the next
event, and report -EINVAL if no complete event has been copied. This
prevents an undersized read from looking like end-of-file while leaving
the event queued for a later read with a large enough buffer.
-
CVE-2026-98905
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Properly acquire queue buffers in CRIU restore
When kfd_queue_acquire_buffers() was split off from
set_queue_properties_from_user(), set_queue_properties_from_criu()
was missed. Thus, set_queue_properties_from_criu() is not
filling out the buffer fields of queue_properties, which
can come up when subsequent code expects them to be non-null.
Add the proper call to kfd_queue_acquire_buffers(), and also
use the right cast types in set_queue_properties_from_criu()
(which were missed at the same time)
(cherry picked from commit 88ed96abbbe27b70193544fbc1ee06448c274714)
-
CVE-2026-98903
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
mailbox: imx: Add a channel shutdown field
sashiko complained about possible teardown problem. The scenario
CPU 0 CPU 1
imx_mu_isr() imx_mu_shutdown()
imx_mu_xcr_rmw(priv, IMX_MU_RCR, 0, IMX_MU_xCR_RIEn(priv-dcfg->type, cp->idx));
imx_mu_specific_rx()
imx_mu_xcr_rmw(priv, IMX_MU_RCR, IMX_MU_xCR_RIEn(priv->dcfg->type, 0), 0);
free_irq()
The RX event remains enabled because in this short window the RX event
was disabled in ->shutdown() while the interrupt was active and then
enabled again by the ISR while ->shutdown waited in free_irq().
This race requires timing and if happens can be problematic on shared
handlers if the "removed" channel triggers an interrupt. In this case
the irq-core will shutdown the interrupt with the "nobody cared"
message.
Introduce imx_mu_con_priv::shutdown to signal that the channel is
shutting down. This flag is set with the lock held (by
imx_mu_xcr_clr_shut()). The unmask side uses imx_mu_xcr_set_act() which
only enables the event if the channel has not been shutdown and
serialises on the same lock.
-
CVE-2026-98902
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
md/raid5: let stripe batch bm_seq comparison wrap-safe
Once the 32-bit seq wraps, a newer bm_seq can look smaller
than old, so .. covert to wrap-safe calculate way.
-
CVE-2026-98898
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm/si: Don't schedule thermal work when queue isn't initialized
When DPM is turned off with the amdgpu.dpm=0 module parameter,
the thermal work queue isn't initialized so we shouldn't
schedule any work on it.
(cherry picked from commit bd018d36171a695952c6d391471c279c9e05c8b2)
-
CVE-2026-98897
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: don't hold ci-m_lock while waiting for a lease break ack
When a cifs.ko client caches a read-handle (RH) lease via deferred close
and a conflicting open arrives, ksmbd breaks the lease and waits for the
acknowledgment in wait_for_break_ack() for up to OPLOCK_WAIT_TIME (35s).
__smb_break_all_levII_oplock() runs that wait while holding ci->m_lock
for read.
cifs.ko reacts to a handle-lease break by closing the deferred handle
rather than sending a lease break acknowledgment. That close path
(close_id_del_oplock() -> opinfo_del()) takes ci->m_lock for write and
is exactly what would wake the waiter, but it blocks on the read lock
held by the waiting thread. The break is then resolved only by the 35s
timeout, so xfstests generic/001 takes ~78s with leases enabled versus
~4s with oplocks only.
Collect the target opinfos (each pinned with a reference) while holding
ci->m_lock, then break them after releasing it, matching how
smb_grant_oplock() already breaks a conflicting lease using only a
reference. The reference keeps the opinfo (and its conn and lease)
alive across the unlocked window, and a close racing the break is
handled by the existing OPLOCK_CLOSING state check. Apply the same fix
to the parent lease break paths.
-
CVE-2026-98896
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Keep the domain reference while processing hotplug
We process hotplug events in a workqueue that may run after the domain
has been removed by tb_domain_remove(). For example if user unloads the
driver while at the same time plugging a device router we may have
scheduled tb_handle_hotplug() to run. Avoid possible UAF in this case by
taking the domain reference before scheduling the hotplug handler in
tb_queue_hotplug().
-
CVE-2026-98895
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: HWS, Handle destroying table that has a miss table
If a table has a miss table that was created by
'mlx5hws_table_set_default_miss' API function, its miss_tbl
keeps the table that points to it in a list.
If such table is deleted, we need to also remove it from the
miss_tbl list, otherwise the node in miss_tbl list will contain
garbage.
-
CVE-2026-98879
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
isofs: handle set_blocksize failures
isofs uses buffer_heads, which don't handle block size PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
-
CVE-2026-98874
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o netdetect
Clearly, from a user perspective, it must be valid to configure
WoWLAN and then suspend while not connected to a network. Since
mac80211 doesn't distinguish these cases and simply calls the
driver to suspend whenever WoWLAN is configured, the driver has
to cleanly handle the case where it's called for WoWLAN, it's
not connected but there's also no netdetect configured.
Remove the WARN_ON() and keep returning 1 to disconnect and
then suspend.
-
CVE-2026-98872
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
freevxfs: don't BUG() on unknown typed-extent type
vxfs_bmap_typed() handles four typed-extent types and calls BUG() in
its default case, so an on-disk typed extent with any other type value
crashes the kernel. It is reachable from ioctl(FIBMAP) on a regular
file:
kernel BUG at fs/freevxfs/vxfs_bmap.c:230!
RIP: vxfs_bmap_typed fs/freevxfs/vxfs_bmap.c:230 [inline]
vxfs_bmap1+0x128a/0x12d0 fs/freevxfs/vxfs_bmap.c:257
Replace the BUG() with WARN_ON_ONCE() and return 0 -- the value
vxfs_bmap_typed() already returns on failure (and from the DEV4 case
above); vxfs_getblk() maps 0 to -EIO, so the ioctl fails cleanly.
-
CVE-2026-98867
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: bound the logical key offset from persistent memory
cache_key_decode() takes a key's logical off from the cache device and
later indexes req_key_tree-subtrees[] by it in get_subtree(). An off
past the device forms a subtree pointer outside the array, which
rb_insert() writes through during replay.
Reject a key of zero length, or whose off+len (computed in 64 bits)
exceeds the device size, before it is used.
-
CVE-2026-98865
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't run ops.dequeue() with a DSQ lock held
ops.dequeue() is invoked with the source user DSQ's lock still held on
the consume and move paths (scx_consume_dispatch_q(),
move_task_between_dsqs()). A BPF scheduler which locks the source user
DSQ from ops.dequeue() - e.g. by iterating it with bpf_iter_scx_dsq -
self-deadlocks.
ops.dequeue() can only call the "any" kfuncs and none of them can lock a
builtin DSQ, so the global and bypass paths can't deadlock; however,
all DSQ locks share one lockdep class, so iterating any user DSQ from
ops.dequeue() on those paths trips the recursion check.
Move the invocation after the DSQ unlock on all three paths.
SCX_TASK_IN_CUSTODY is cleared under the lock serializing the transfer
so that the callback is invoked exactly once.
-
CVE-2026-98864
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Wait for SCX_OPSS_DISPATCHING before reenqueueing a task
ebf1ccff79c4 ("sched_ext: Fix ops.dequeue() semantics") moved the final
ops_state store in scx_dispatch_enqueue() after the DSQ unlock so that the
custody update and ops.dequeue() precede it. A task can thus be found on a
DSQ while still SCX_OPSS_DISPATCHING.
The dequeue and core-sched pick paths wait for the state to clear in
ops_dequeue() but the reenqueue paths don't. A reenqueue in that window runs
ops.enqueue() and sets SCX_OPSS_QUEUED before the dispatch has completed.
The dispatcher's final store then overwrites it with SCX_OPSS_NONE and
finish_dispatch() drops every later dispatch of the task.
Wait for SCX_OPSS_DISPATCHING to clear before dequeueing a task for
reenqueue, the same way ops_dequeue() does.