-
CVE-2026-98858
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix task_work add use-after-free with SQPOLL
For SQPOLL, the sqpoll thread runs task_work off its own list and
doesn't need to be told about it, so it can pop and complete a request
as soon as mpscq_push() has published it. If that was the last request
holding the ring alive, io_ring_exit_work() then frees the ctx, stops
the thread, and with it the tctx, while io_req_normal_work_add() is
still looking at both after the push:
BUG: KASAN: slab-use-after-free in io_req_normal_work_add+0x439/0x510
Read of size 4 at addr ff11000000ca0000 by task repro/55
(...)
BUG: KASAN: slab-use-after-free in queue_work_on+0x25/0x70
Write of size 8 at addr ff11000000c3bd00 by task repro/55
Hold an RCU read lock across the add, like io_req_local_work_add() already
does, and have io_ring_exit_work() wait for a grace period for SQPOLL rings
as well before freeing the ctx.
-
CVE-2026-98852
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: extend IPv6 exthdr detection of tunneled packets
Commit c4336a07eb6b ("net: correctly handle tunneled traffic on IPV6_CSUM
GSO fallback") split skb_gso_has_extension_hdr() into mutually exclusive
branches on skb-encapsulation. This did not yet address all paths:
1. With skb->encapsulation set, the outer header is not checked. IPv6
tunnels such as ip6_gre and ip6_tunnel add an outer Destination
Options header by default (encap_limit). Their GSO packets skip
software GSO, then skb_csum_hwoffload_help() sees the outer extension
header and calls skb_checksum_help() on the GSO skb, which warns and
drops it.
2. Tunnels over IPv6 without an outer transport header, such as
ip6_tunnel, leave skb->transport_header at the inner transport
header. skb_network_header_len() then spans the outer IPv6, tunnel
and inner IP headers, a false positive.
3. UDP tunnels without an inner network header, such as SCTP-in-UDP or
PSP, have no inner IPv6 header to check. Decide on the outer header
alone.
4. Directly dereferencing inner_ip_hdr(skb)->version without
skb_header_pointer() is unsafe.
Instead, check ipv6_ext_hdr(nexthdr) on the outer IPv6 header and, if
set, on the inner IPv6 header. Read the headers with skb_header_pointer().
Keep the skb_network_header_len() check when !skb->encapsulation to also
catch encapsulated packets without skb->encapsulation (e.g., virtio).
Use the same helper in skb_csum_hwoffload_help(). Its open coded test
has the false positive of (2) and ignores the inner header.
Background: checksum offload of tunneled packets invariants:
Non-GSO skb:
- If the inner packet is CHECKSUM_PARTIAL, Local Checksum Offload computes
the outer checksum in software and the device offloads only the inner L4
checksum.
- If the inner packet is CHECKSUM_NONE (e.g., SCTP-in-UDP, ESP-in-UDP,
Remote Checksum Offload), the device offloads the outer UDP or GRE
checksum instead.
GSO skb:
- A device with NETIF_F_GSO_UDP_TUNNEL_CSUM or NETIF_F_GSO_GRE_CSUM
computes both inner and outer checksums per segment.
The outer checksum is seeded with only the pseudo-header checksum.
A NETIF_F_IPV6_CSUM device must parse through the outer headers to
reach the inner ones.
-
CVE-2026-98845
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
tpm: Disable TPM on null key name mismatch
The null key name check exists to protect against TPM reset attacks, so
a mismatch should stop the device from serving further requests.
Currently it does not disable the chip when it finds a mismatch.
The mismatch is logged:
tpm tpm0: null key integrity check failed
but the chip keeps serving commands:
/ # tpm2_getcap -c properties-fixed
TPM_PT_FAMILY_INDICATOR:
as UINT32: 0x08322e3000
as string: "2.0"
...
tpm2_load_null() where the null key name check is run sets the chip as
disabled only if the rc is non zero. When the mismatch is seen, rc is
zero at that point and it returns success. The other issue is that the
caller expects the null key handle to be populated when the function
returns 0 which it does here without writing the handle and proceeds
assuming the null key handle is valid.
During the test, I noticed that tpm2_start_auth_session() uses the
uninitialized stack value as the key handle since tpm2_load_null()
returns 0 despite the integrity failure and proceeds with
TPM2_CC_START_AUTH_SESS with this value as salt key handle.
Set rc to -ENODEV on the mismatch. The error path then disables the chip
and returns the correct code to the caller.
Tested in QEMU with swtpm and CONFIG_TCG_TPM2_HMAC=y by making
TPM2_CC_CONTEXT_LOAD fail with TPM2_RC_INTEGRITY and changing the name
of the re-created null key. The chip is now disabled on the mismatch.
-
CVE-2026-98841
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
virt: vmgenid: set driver_data before registering notification handlers
Both probe paths register their notification handler before assigning
driver_data, which the handler dereferences.
In the devicetree path, the notification IRQ can fire as soon as
devm_request_irq() registers the handler: the interrupt may already be
pending at probe time, for example when a VMM injects the
generation-changed notification while restoring a guest from a snapshot
that was taken before the driver had probed (Firecracker does exactly
this on snapshot restore). The IRQ is also requested with IRQF_SHARED,
so another device sharing the line can trigger the handler just as
early. The handler then calls vmgenid_notify(), which dereferences the
still-NULL driver_data and panics:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.38+ #1 PREEMPT(none)
Hardware name: linux,dummy-virt (DT)
pc : vmgenid_notify.isra.0+0x24/0x8c
lr : vmgenid_of_irq_handler+0x14/0x34
Call trace:
vmgenid_notify.isra.0+0x24/0x8c (P)
vmgenid_of_irq_handler+0x14/0x34
__handle_irq_event_percpu+0x44/0x1bc
handle_irq_event+0x4c/0xb4
handle_fasteoi_irq+0xf8/0x1f8
The ACPI path has the same ordering problem: the handler is installed
with acpi_install_notify_handler() before driver_data is assigned.
ACPI notifications are dispatched asynchronously from a workqueue, so
the window is narrow, but a notification arriving between the two calls
hits the same NULL dereference.
Assign driver_data before registering the handlers. The state is fully
initialized at that point, so the handlers are safe to run. Should
registration fail, the probe error path leaves no dangling pointer
behind: the driver core clears driver_data in device_unbind_cleanup().
-
CVE-2026-98834
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
mtd: core: avoid double-free of OTP NVMEM device
If factory OTP setup fails after the user OTP NVMEM device has been
registered, mtd_otp_nvmem_add() unregisters the user device but leaves
mtd-otp_user_nvmem set. On an error, the caller unregisters it again.
For -EOPNOTSUPP, registration continues and normal teardown unregisters
it again.
Clear mtd->otp_user_nvmem after unregistering it.
-
CVE-2026-98830
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: wfx: validate MIB read length before copying to caller
wfx_hif_read_mib() copies reply-length bytes from the firmware
response into the caller-provided buffer without checking that
reply->length does not exceed val_len. A firmware response with
a length field larger than expected overruns the caller buffer and
reads past the end of the reply allocation.
Replace the dead -ENOMEM check with an active validation that
reply->length fits within val_len before the memcpy.
-
CVE-2026-98822
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: prevent AP VLAN tx from other interfaces
Since the station lookup was factored out of ieee80211_build_hdr(),
ieee80211_lookup_ra_sta() uses sta_info_get_bss() for all AP and AP VLAN
frames, not only for control port frames. A unicast frame sent on one
interface thus matches a station of a different VLAN of the same BSS and
is transmitted to it.
Only match stations of the interface the frame is sent on, except for
control port frames, since those may be sent for VLAN stations directly
on the BSS interface.
-
CVE-2026-98819
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: validate DDC record lengths
Parse DDC record lengths in unsigned storage so 0xFF does not wrap.
Reject records smaller than the mandatory three-byte header, records
exceeding U8_MAX, and records exceeding remaining firmware bytes before
issuing Intel_Write_DDC.
This issue was reported by Claude Mythos.
-
CVE-2026-98807
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix slab-out-of-bounds when handling team device events
The mlx5_handle_changeupper_event() and mlx5_handle_changeinfodata_event()
functions check for LAG masters (which includes both bonding and team
devices) but only call bonding-specific APIs. When processing team device
events, calling bond_slave_get_rcu() and bond_is_slave_inactive() on
team_port structures causes KASAN to detect an out-of-bounds memory access
since team_port is smaller than bond slave.
Fix this by wrapping the bond-specific API calls with a check for bonding
devices. This allows the function to still process LAG events for both
bonding and teams but only calls bond-specific functions when dealing with
actual bonding devices.
For mlx5_handle_changeinfodata_event(), keep the explicit bond check as
mlx5 doesn't handle state information for team ports anyway.
Tested with Mellanox ConnectX-5 on Linux 7.2.0-rc6:
- Bonding: PASS (no regressions)
- Team device: PASS (no KASAN errors)
-
CVE-2026-98805
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
tipc: prevent GCM nonce reuse on peer key changes
TIPC can encrypt traffic between nodes using a different transmit key
for each node. In this mode, the AES-GCM nonce for a packet sent to a
known peer consists of a 32-bit prefix (a per-key salt XOR the peer's
address) followed by a 64-bit counter. That counter is stored in the
peer's RX crypto object. When the peer reports a change in which key
it uses to receive packets, TIPC resets this counter. The sender can
still be using the same TX key and salt, so subsequent packets reuse
earlier nonces. This nonce reuse breaks confidentiality and exposes
GCM's authentication key. This makes forgeries trivial: an attacker
can exploit CTR malleability to alter captured ciphertexts and use the
recovered authentication key to compute a valid tag for the modified
ciphertext, under the same key and nonce.
Use the TX key's existing aead-seqno counter instead. All encryptions
using that key object share the same atomic counter, so concurrent
encryptions get distinct nonce counter values. The counter survives
key activation and peer reconnection, and peer key-status reports
cannot reset it. This prevents those transitions from causing nonce
reuse while the same TX key remains installed.
The nonce format is unchanged, and receivers do not require consecutive
counter values, so sharing the counter across peers remains compatible
with existing receivers. A pre-existing check still invokes key
revocation in the unlikely event that the counter wraps to zero.
-
CVE-2026-98803
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix rx Scatter-Gather support
When a received frame is larger than dma_buf_sz, the DMA scatters it
across multiple RX descriptors (rx Scatter-Gather). The secondary RX
buffer (sec_page) was only allocated and programmed when split-header
(SPH) was active, so for regular frames buffer2 was neither allocated
nor backed by a valid mapping. As soon as an incoming frame overflowed
buffer1, the DMA wrote the overflow into the unmapped secondary-buffer
address, triggering an SMMU translation fault on IOMMU-based platforms:
arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x00000000, fsynr=0x7f0011, cbfrsynra=0x1c90, cb=11
arm-smmu 15000000.iommu: FSR = 00000402 [Format=2 TF], SID=0x1c90
arm-smmu 15000000.iommu: FSYNR0 = 007f0011 [S1CBNDX=127 WNR PLVL=1]
Enable scatter-gather for non-SPH frames on cores that can program an
independent secondary RX buffer (GMAC4/XGMAC): allocate and mark buffer2
as valid in stmmac_init_rx_buffers() and stmmac_rx_refill(), and account
for it in the buffer length computation. Legacy cores have no set_sec_addr
op, so they keep buffer2 disabled.
Since buffer2 is handed to the DMA at page offset 0, the page pool sync
window is widened to cover both buffers in every mode: offset is set to 0
and max_len to dma_buf_sz + stmmac_rx_offset().
The FCS can straddle the buffer1/buffer2 boundary and a descriptor
boundary, so it is now stripped from the tail of the assembled frame with
pskb_trim() instead of from a single buffer, avoiding an unsigned underflow
for frames that overflow a buffer by 1..3 bytes. For single-buffer frames
the XDP program must not see the FCS, so it is removed from the XDP buffer
before the program runs.
Native XDP currently only supports single-buffer (linear) frames. An
oversized frame accepted by the MAC (jumbo enabled) is received via
buffer2; the XDP program only sees buffer1, so on a TX/REDIRECT verdict
the frame is forwarded truncated. XDP multi-buffer support to handle
this case is planned as a follow-up.
AF_XDP zero-copy RX is not covered by this change: a ZC queue still
programs buffer2 at DMA address 0 (and XGMAC has no buffer2-valid bit),
so an oversized frame overflowing buffer1 can still trigger the same
SMMU translation fault. Handling is planned as a follow-up.
-
CVE-2026-98802
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
seg6: ensure packet data is writable before modifying SRH and IPv6 DA
advance_nextseg() modifies the SRH Segments Left field and the IPv6
destination address without ensuring the packet data is writable.
seg6_next_csid_advance_arg() has the same problem when it advances the
NEXT-C-SID argument in the destination address.
The skb may be cloned, for example by an AF_PACKET socket receiving on
the ingress device. advance_nextseg() and seg6_next_csid_advance_arg()
then write into the packet data shared with the clone. A read from that
socket can return the modified packet instead of the received one. The
simplified path below shows this for advance_nextseg():
__netif_receive_skb_one_core
__netif_receive_skb_core
deliver_skb [orig: users=2, cloned=0]
packet_rcv
skb_clone clone queued to the AF_PACKET socket
consume_skb(orig) [orig: users=1, cloned=1]
ipv6_rcv
ip6_rcv_core skb_share_check: no-op [orig: users=1]
[...]
input_action_end_core
advance_nextseg writes into the data shared with the clone
Call skb_ensure_writable() in advance_nextseg() and in
seg6_next_csid_advance_arg() before they modify the packet data.
skb_ensure_writable() may reallocate skb-head, which invalidates the
pointers into the packet data taken before the call.
advance_nextseg() now returns a valid SRH pointer, or NULL if
skb_ensure_writable() fails.
seg6_next_csid_advance_arg() takes the pointer to the destination
address from the skb after skb_ensure_writable().
On failure, the callers drop the packet with SKB_DROP_REASON_NOMEM.
-
CVE-2026-98799
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Skip detached progs in trampoline images that are still in use
bpf_tramp_image_put() makes sure a trampoline image is not freed while
a task may still be running in it, but nothing similar is done for the
progs called by that image. Detach drops the last prog reference right
away and the prog is freed after grace periods, on the basis that a
task still in the traced function skips the fexit progs once the nop at
ip_after_call is patched to a jump.
That leaves out a task sleeping in a sleepable prog that runs before
the detached one, which no grace period waits for:
CPU 0 CPU 1
in image I, sleeping in prog S
detach P from I's trampoline
- new image, bpf_tramp_image_put(I)
bpf_prog_put(P), last ref
grace periods, P freed
back from S
__bpf_prog_enter(P)
call P->bpf_func
If S and P are fexit progs the task is already past the patched jump,
and fentry only images don't have one. On x86 this is an int3 in
poisoned bpf_prog_pack memory:
Oops: int3: 0000 [#1] SMP NOPTI
CPU: 18 UID: 0 PID: 94573 Comm: x169 Not tainted 6.18.44 #1 PREEMPT(lazy)
RIP: 0010:0xffffffffc0601d8d
Call Trace:
TASK>
? bpf_trampoline_6442515411+0x1a4/0x21b
bpf_lsm_bprm_committed_creds+0x5/0x10
security_bprm_committed_creds+0x5f/0x70
begin_new_exec+0x2d6/0x410
...
We hit this in production when progs attached through trampolines got
detached while their hooks were busy, and it was independently found
with a fuzzer and KASAN.
Have the JITs emit a patchable nop in front of each prog call sequence
and record it in the image. When a prog is detached, patch its nop to a
jump over the call sequence. Progs that stay attached keep running for
the tasks that are in the image, and ip_after_call isn't needed anymore.
The task can be in any image that isn't freed yet, not only in the
current one. It sleeps in image I1 that calls S, P and Q, then P is
detached and the trampoline moves to image I2, then Q is detached and
its call is still in I1. So the trampoline keeps a list of its images
until they are freed, and detaching a prog patches its nop in all of
them. Images hold a reference on the trampoline for that long.
On riscv and loongarch a jump of any range takes several instructions,
and a task preempted in the middle of them could resume into half of the
new sequence. The nop is a single instruction there, patched to a near
branch through arch_bpf_trampoline_skip().
With the extra nops, BPF_MAX_TRAMP_LINKS progs no longer fit in a page
on x86 and arm64 (and already didn't on powerpc), so lower the limit
there like s390 does.
-
CVE-2026-98797
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: cap skb-queue_mapping when the tx queue is picked
skbedit can set skb->queue_mapping and raise the per-CPU skip_txqueue
flag so __dev_queue_xmit() honours the mapping. __dev_queue_xmit()
cleared the flag before sch_handle_egress() and only read it afterwards,
so the flag was not confined to the xmit that set it: a nested xmit
(mirred redirect or mirror, or a drop after skbedit) could set the flag
and the outer xmit would consume it for an skb that never went through
skbedit.
A forwarded packet still carries the ingress NIC's rx_queue + 1 in
skb->queue_mapping, so the outer device then indexes its tx queue state
with that stale value. Taprio's child array q->qdiscs[] is sized to the
device's queue count, so taprio_enqueue() indexes past its allocation
and dereferences the result as a struct Qdisc *.
We (ab)use the skb->nf_skip_egress which means "skip netfilter egress
for this packet" to tag to "am I in tc egress?". Despite the overload
I dont see it as a conflict since the marker is set only around the
single sch_handle_egress() call and ingress path is guarded by
tc_at_ingress.
I will send a followup(net-next) patch once this hits net-next to
rename the skb->nf_skip_egress bit/flag to skb->skip_egress
Arm the flag only from the egress classifier that can use it: raise
skip_txqueue from tcf_skbedit_act() only when it runs inside
sch_handle_egress(), thanks to skb->nf_skip_egress. An egress qdisc
classifier runs in q->enqueue(), after the tx queue has been picked,
so a mapping it sets cannot affect the current packet; arming the flag
there only pollutes it for a later xmit. Then own the flag for the xmit
frame the egress hook runs in: save the incoming value and clear it just
before sch_handle_egress(), and restore it after the hook - on the
consumed (drop) path, or, in the same call that reads it, on the
surviving path. The save and the restores stay inside the
egress_needed_key static branch, so a packet pays for them only when
egress hooks are active (2f1e85b1aee4).
Store the value netdev_cap_txqueue() selected back into skb->queue_mapping
in netdev_tx_queue_mapping(), as netdev_core_pick_tx() already does, so
the skip_txqueue path never hands a later reader on the xmit path a
mapping the device cannot serve. A store made still later in the same
frame, by a tc BPF program attached to a transmit qdisc, is outside this
path and is not re-capped; a separate followup will resolve that path.
netdev_xmit_skip_txqueue() returns the previous flag value so the
save-and-clear is one call, and a no-op stub is provided when
CONFIG_NET_EGRESS is disabled. skb->nf_skip_egress is compiled under
CONFIG_NET_EGRESS rather than CONFIG_NETFILTER_SKIP_EGRESS, so
skb_at_tc_egress() is valid whenever the egress path is built.
A local user in a network namespace can redirect a packet from a device
with more TX queues to one with fewer after setting a mapping valid only
on the larger device. That reaches these reads and, under KASAN, faults
with "slab-out-of-bounds in taprio_enqueue".
Conditions to recreate the bug: the report's own trigger is a local user
with CAP_NET_ADMIN in a network namespace, so no eBPF program is needed.
With CONFIG_NET_SCH_TAPRIO=y, CONFIG_NET_ACT_SKBEDIT=y,
CONFIG_NET_ACT_MIRRED=y, CONFIG_NET_CLS_MATCHALL=y,
CONFIG_NET_SCH_PRIO=y and KASAN enabled, create qa (3 queues), qb
(2 queues) and qc (1 queue) as dummy devices; put a taprio root on qb
(num_tc 1, queues 2@0) and clsact on all three; then add an egress
matchall filter on every device. On qa: "action skbedit queue_mapping 2
pipe action mirred egress redirect dev qb". On qb: "action mirred egress
mirror dev qc". On qc: "action skbedit queue_mapping 0 pipe". Send one
packet out qa. qc's skbedit sets the flag while qb's outer xmit is in
flight; without the fix qb consumes it and reads its two-entry taprio
child array with the forwarded packet's stale mapping. A qc whose
skb
---truncated---
-
CVE-2026-98792
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: generalize pending status bit
Rename NF_FLOW_HW_PENDING to NF_FLOW_PENDING and use it to inhibit the
flowtable GC worker until pending hw offload work has been completed.
Apparently, nf_flow_offload_stats() can schedule work to retrieve stats
while the flow is being removed by GC.
And this bit can also be used in a follow up patch to disable GC until
the flow has been fully added in both directions.
Revert the reordering done in commit d644b23afe1e ("netfilter:
flowtable: publish HW_DEAD after worker is done") to prevent a race
between GC and hw offload handler.
-
CVE-2026-98781
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Fix pdev reference leak in mtk_drm_bind()
When the device is not the mmsys master, mtk_drm_bind() returns early
after taking a reference on the disp-mutex device via
of_find_device_by_node(), without ever dropping it: mtk_drm_unbind()
only puts mutex_dev for the master. Drop the reference before returning
from the non-master path.
-
CVE-2026-98780
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix IP instance memory leak on kobject add failure
amdgpu_discovery_sysfs_ips() allocates ip_hw_instance with
kzalloc_flex() and initializes its embedded kobject before calling
kobject_add().
If kobject_add() fails, the return value is ignored and execution
continues without dropping the initial kobject reference. The failed
kobject is not retained in the kset list, so the normal sysfs teardown
path cannot find it. As a result, ip_hw_instance_release() is never
called and the ip_hw_instance allocation is leaked.
Call kobject_put() when kobject_add() fails so the initial reference is
dropped and ip_hw_instance_release() can free the allocation. Keep the
existing best-effort sysfs behavior by continuing with the remaining IP
entries after the failed registration.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
(cherry picked from commit 5c75fbcca8af1096d8d9415b91d8ea6212c22ee1)
-
CVE-2026-98773
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
USB: cdc-acm: skip URB restart in port_shutdown if disconnected
acm_port_shutdown() is called from the tty-port machinery whenever the
last user closes the port. acm_disconnect() sets acm-disconnected and
calls tty_port_tty_vhangup(), which eventually triggers port_shutdown().
At that point acm_disconnect() has already called acm_poison_urbs() and
is about to free the control and read URBs.
However, acm_port_shutdown() unconditionally calls acm_unpoison_urbs()
and, when the ALWAYS_POLL_CTRL quirk is set, immediately re-submits the
ctrlurb and all read URBs. If the concurrent acm_disconnect() then
frees those URBs and their DMA buffers while they are in-flight, the
result is a use-after-free in acm_ctrl_irq() or acm_read_bulk_callback()
accessing the freed DMA memory.
Fix by checking acm->disconnected after draining the delayed anchor and
returning early: if we are in a disconnect path the URBs must remain
poisoned and must not be resubmitted.
The early return is placed after the delayed-anchor drain loop because
that loop only cancels write-side accounting (wb->use = false and
autopm counter) and does not touch the hardware path.
-
CVE-2026-98772
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
USB: serial: fix port tear down use-after-free
Some drivers for multiport devices access port driver data from
completion handlers of shared URBs submitted at attach() or first open()
and stopped at disconnect() or last close(), respectively.
A simple NULL check before accessing the driver data makes sure that a
port state container has at least been allocated, but a completion
handler can still race with port tear down.
Reorder the disconnect handling so that ports are not deregistered (and
their driver data freed) until after all ports have been hung up and the
driver disconnect() callback has run so that all I/O has been stopped.
-
CVE-2026-98762
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
USB: dwc2: shut down wakeup timer before freeing HCD state
dwc2_wakeup_detected() accesses the DWC2 host state and can rearm the
wakeup timer. dwc2_hcd_free() currently deletes the timer only after
freeing host-owned state, and timer_delete() does not synchronize a
callback or prevent it from being queued again.
Stop and shut down the timer in dwc2_hcd_release(), before the HCD
resources are freed. This covers both the HCD initialization error path
and normal HCD removal.