-
CVE-2026-98420
•
published on October 14, 2026
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: follow SMB2 session expiration semantics
ksmbd_session_register() destroys valid sessions after ten seconds of
inactivity whenever a client starts another SessionSetup exchange. This
confuses Session.IdleTime with Session.ExpirationTime. Windows can create
additional authenticated sessions on an existing connection, so deleting
the older session invalidates its tree connects and makes mapped drives
fail with STATUS_NETWORK_NAME_DELETED.
The session expiration rules require the server to change a valid session
to expired only after its credential expiration time passes. A valid or
expired session otherwise keeps its connection from being scavenged.
Connections that have not negotiated a dialect, have no sessions, or have
only InProgress sessions are disconnected after an implementation-specific
timeout. Use the Windows-compatible 45 second value and run the expiration
check periodically for both TCP and SMB Direct.
Keep zero as an infinite credential expiration time, and count each
Valid-to-Expired transition. Set expired sessions to InProgress when they
reauthenticate. If authentication fails, remove the session from the
global and per-connection tables immediately, including SMB3 multichannel
connections.
Retain protection against abandoned SessionId-zero exchanges by allowing
only one InProgress authentication per connection. Additional exchanges
fail with STATUS_INSUFFICIENT_RESOURCES, and stale InProgress sessions are
reaped after the same 45 second setup timeout. This bounds the original
unauthenticated memory-exhaustion path without evicting established
sessions.
-
CVE-2026-98417
•
published on October 14, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: xfrm: reject unrepresentable espintcp transport headers
ESP-in-TCP can hand xfrm packets whose transport header offset no longer
fits after the stream parser trims the TCP envelope. The plain transport
header reset truncates that offset and triggers the skb warning path.
Use the careful transport-header helper and drop the skb through the
existing XFRM error path when the offset cannot be represented.
-
CVE-2026-98416
•
published on October 14, 2026
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: ti: k3-udma-glue: fix NULL dereference in k3_udma_glue_release_rx_chn()
If devm_kcalloc() for rx_chn-flows fails in a channel request function,
the error path calls k3_udma_glue_release_rx_chn(), which dereferences
the NULL rx_chn->flows pointer in k3_udma_glue_release_rx_flow().
Skip the flow release loop in k3_udma_glue_release_rx_chn() when
rx_chn->flows is not allocated.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
-
CVE-2026-98411
•
published on October 14, 2026
In the Linux kernel, the following vulnerability has been resolved:
power: sequencing: fix NULL-pointer dereference in pwrseq_device_register()
If dev_set_name() fails in pwrseq_device_register(), we jump to the
err_put_pwrseq label before initializing pwrseq-targets.
pwrseq_release() will try to iterate over targets unconditionally and
subsequently dereference an invalid pointer. Move the call to
dev_set_name() after the list head is initialized.
-
CVE-2026-98410
•
published on October 14, 2026
In the Linux kernel, the following vulnerability has been resolved:
watchdog: da9063: fix suspend/resume handling of HW_RUNNING watchdog
da9063_wdt_suspend() and da9063_wdt_resume() only check watchdog_active(),
when the watchdog is left running by the driver sets
WDOG_HW_RUNNING in da9063_wdt_probe() but userspace never opens the
device, so WDOG_ACTIVE remains cleared, the wdt_disable() will not be
executed in da9063_wdt_suspend. In this case, the suspend callback is
a no-op and the watchdog keeps counting during system suspend,
leading to an unexpected system reset.
Check WDOG_HW_RUNNING and wdd,can fix this issue.
-
CVE-2026-98399
•
published on October 14, 2026
In the Linux kernel, the following vulnerability has been resolved:
s390/ipl: Fix NULL deref in dump_reipl without re-IPL parm block
Unlike kdump, which passes the re-IPL parameter block through os_info,
the stand-alone dump passes it through the IPL parm block address and
checksum in lowcore.
Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might not
provide an IPL parameter block. In this case reipl_type_init() selects
IPL_TYPE_UNKNOWN and reipl_block_actual remains NULL. Nevertheless,
dump_reipl_run() unconditionally dereferences it when preparing the
lowcore fields. This may happen to work by chance when address zero
contains readable lowcore data. A zero IPL parameter block address is
then stored in lowcore, causing the stand-alone dumper to enter disabled
wait after completing the dump.
Explicitly store a zero IPL parameter block address and checksum when no
re-IPL parameter block is available. This does not change the behavior:
the stand-alone dumper completes the dump and halts, while valid re-IPL
parameter blocks continue to be handled as before.
-
CVE-2026-98398
•
published on October 14, 2026
In the Linux kernel, the following vulnerability has been resolved:
locking/lockdep: Invalidate stale class_cache entries for zapped classes
syzbot reported a lockdep splat hitting DEBUG_LOCKS_WARN_ON(1) in
hlock_class() due to an invalid class_idx:
WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x382/0x2cf0 kernel/locking/lockdep.c:5203
Workqueue: wg-crypt-wg0 wg_packet_tx_worker
RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline]
RIP: 0010:check_wait_context kernel/locking/lockdep.c:4870 [inline]
RIP: 0010:__lock_acquire+0x389/0x2cf0 kernel/locking/lockdep.c:5203
Call Trace:
IRQ
lock_acquire+0x106/0x350 kernel/locking/lockdep.c:5886
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:173
tcp_tsq_handler+0x29/0x200 net/ipv4/tcp_output.c:1291
tcp_tsq_workfn+0x384/0x410 net/ipv4/tcp_output.c:1325
...
When a lock class is zapped (e.g. during module unload or key
unregistration), zap_class() clears the class's bit in
lock_classes_in_use and removes it from the class hash table.
However, existing lockdep_map instances embedded in data structures
may still retain a pointer to the zapped class in their class_cache[]
array.
When __lock_acquire() subsequently runs on such a lock, it finds
lock->class_cache[subclass] != NULL, skipping register_lock_class()
and assigning hlock->class_idx to the index of the zapped class. When
check_wait_context() or hlock_class() inspects the held_lock, it finds
!test_bit(class_idx, lock_classes_in_use) and warns. Furthermore, if
the zapped slot is subsequently re-allocated to an unrelated lock key,
the stale class_cache entry would erroneously match the unrelated
class (ABA issue).
Add lock_class_cache_is_valid() to validate that the cached class is
within lock_classes bounds, still allocated in lock_classes_in_use
(using uninstrumented arch_test_bit() in __always_inline context so it
is safe in noinstr contexts like match_held_lock()), and that
class->key matches the expected subkey (taking lockdep_set_subclass()
overrides into account). Also use READ_ONCE()/WRITE_ONCE() when
accessing class_cache[]. If the entry is invalid or stale, fall back
to register_lock_class() / look_up_lock_class().
-
CVE-2026-98397
•
published on October 14, 2026
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: x86-android-tablets: hold device reference for secondary fwnode teardown
In gpio_secondary_fwnode_init(), acpi_bus_find_device_by_name() returns a
device reference, but the local dev variable is declared with
__free(put_device), dropping the reference at the end of each iteration.
Meanwhile, devm_add_action_or_reset() saves the dev pointer for
gpio_secondary_unset() without incrementing its reference count, which
could lead to a use-after-free during driver teardown if the device is
released in the interim.
Acquire an explicit device reference with get_device() when registering
the devres action, and drop it with put_device() inside
gpio_secondary_unset().
-
CVE-2026-98396
•
published on October 14, 2026
In the Linux kernel, the following vulnerability has been resolved:
powerpc: Do not restore KUAP in arch_exit_to_user_mode_prepare()
KUAP means kernel cannot touch user memory unless it explicitly is
enabled. In the kernel it should stay AMR_KUAP_BLOCKED. While returning
to userspace just before RFI, kernel should restore the user AMR value
back.
Looks like GENERIC_ENTRY might be treating arch_exit_to_user_mode_prepare()
as the last architecture step before returning to userspace.
commit bee25f97ad24 ("powerpc: Enable GENERIC_ENTRY feature")
therefore called kuap_user_restore() from that hook. But on PowerPC that
is too early. After irqentry_exit() / syscall_exit_to_user_mode() we
still run platform specific exit routines.
e.g. code snippets showing both exception handling and system call
handling as the callers of function arch_exit_to_user_mode_prepare()
which does kuap_user_restore(). The below path shows that calling
kuap_user_restore() is too early when called from
arch_exit_to_user_mode_prepare().
Exception handling in exceptions-64s.S
=======================================
bl CFUNC(do_page_fault)
..DEFINE_INTERRUPT_HANDLER_ASYNC(do_page_fault)
arch_interrupt_async_enter_prepare(regs);
state = irqentry_enter(regs);
instrumentation_begin();
irq_enter_rcu();
handler(regs);
nap_adjust_return(regs);
irq_exit_rcu();
instrumentation_end();
arch_interrupt_async_exit_prepare(regs);
irqentry_exit(regs, state); << too early
irqentry_exit_to_user_mode()
__exit_to_user_mode_prepare(regs, EXIT_TO_USER_MODE_WORK_IRQ);
arch_exit_to_user_mode_prepare(regs, ti_work); <<< too early
b interrupt_return_srr
.. bl CFUNC(interrupt_exit_user_prepare) <<< already calls kuap_user_restore
prep_irq_for_enabled_exit() retry can run kernel code with IRQs on. So
only when that routine is fully finished is when the user KUAP should be
fully restored which interrupt_exit_user_prepare() already takes care of
before returning.
Similarly for system call handling in interrupt_64.S
======================================================
bl CFUNC(system_call_exception)
.Lsyscall_exit:
addi r4,r1,STACK_INT_FRAME_REGS
li r5,0 /* !scv */
bl CFUNC(syscall_exit_prepare)
.. kuap_assert_locked();
syscall_exit_to_user_mode(regs); <<< too early
syscall_exit_to_user_mode_prepare(regs); <<< too early
kuap_user_restore(regs); <<< already calls
syscall_exit_prepare(), which can enable IRQs, replay a pending
interrupt, and only then rfi. Those functions already restore KUAP
immediately before rfi.
Note that if we restore the user AMR too early like in the current code
as shown from the code snippets above, then we get the following warning
when CONFIG_PPC_KUAP_DEBUG is enabled:
WARNING: arch/powerpc/include/asm/book3s/64/kup.h:293 at interrupt_exit_user_prepare+0x1a0/0x1c0
Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected)
TRAP: 0700
LR: c00000000000d8d4 CTR: c0000000021fe500
MSR:
-
CVE-2026-98394
•
published on October 14, 2026
In the Linux kernel, the following vulnerability has been resolved:
af_unix: Return immediately when manage_oob() returns NULL for 0-length buffer.
Fahad Alharbi reported that recv(0, MSG_PEEK) triggers busy-wait
in unix_stream_read_generic() if recv() is blocking and the last
skb in the queue is MSG_OOB skb.
In such a situation, TCP returns 0 immediately regardless of
blocking or non-blocking.
Let's follow the behaviour.
-
CVE-2026-98389
•
published on October 14, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: skip gfx switch_power_profile during GPU reset
During resume from GPU reset, the gfx idle work may invoke switch_power_profile
before the reset completes. This causes the following assert error because the
register access occurs without first releasing the GPU reset semaphore:
[ 1576.768935] CR2: 0000559ea133ead0 CR3: 00000002e6c42000 CR4: 0000000000350ef0
[ 1576.768940] Call Trace:
[ 1576.768944] TASK
[ 1576.768953] amdgpu_device_rreg+0x21/0x50 [amdgpu]
[ 1576.769158] smu_msg_v1_send_msg+0x1a4/0x6e0 [amdgpu]
[ 1576.769437] smu_cmn_send_smc_msg_with_params_ext+0xba/0x120 [amdgpu]
[ 1576.769721] smu_cmn_send_smc_msg_with_param+0x33/0x40 [amdgpu]
[ 1576.769993] smu_v13_0_0_set_power_profile_mode+0x192/0x2b0 [amdgpu]
[ 1576.770267] smu_bump_power_profile_mode+0x5d/0x80 [amdgpu]
[ 1576.770538] smu_switch_power_profile+0xa4/0xf0 [amdgpu]
[ 1576.770839] amdgpu_dpm_switch_power_profile+0x6f/0x90 [amdgpu]
[ 1576.771210] amdgpu_gfx_profile_idle_work_handler+0xe9/0x130 [amdgpu]
[ 1576.771460] process_one_work+0x23e/0x6f0
[ 1576.771491] worker_thread+0x1c4/0x380
[ 1576.771506] kthread+0x10c/0x150
[ 1576.771512] ? __pfx_worker_thread+0x10/0x10
[ 1576.771518] ? __pfx_kthread+0x10/0x10
[ 1576.771530] ret_from_fork+0x314/0x390
[ 1576.771537] ? __pfx_kthread+0x10/0x10
[ 1576.771546] ret_from_fork_asm+0x1a/0x30
(cherry picked from commit d93b1ff538ce9750c01e0dd0aa62575579c0fc08)
-
CVE-2026-98385
•
published on October 12, 2026
In the Linux kernel, the following vulnerability has been resolved:
sched/cache: Decouple sched_cache_group from mm to fix UAF
Currently the sched cache grouping is by mm and the scheduling statistics
sched_cache_stat lives in the mm structure. This ties the life cycle
of scheduling stats with mm.
In account_mm_sched(), the scheduling stats are accessed by
task-mm->sc_stat. However, a task may be switching mm on one CPU when
another CPU is running account_mm_sched(), and possibly accessing the
old mm that was freed. This problem was found when running tests with
KASAN by Hyunwoo:
https://lore.kernel.org/lkml/apPb-Dr4nPYuHQOK@v4bel/
Instead of serializing the mm access by introducing extra acquisition of
rq lock in the mm free path, extract sched_cache_stat from mm_struct,
rename it as sched_cache_group and manage its life cycle apart from
mm_struct with its own ref counting. This allows us in the next patch
access sched_cache_group directly from task, and add a refcount
on sched_cache_group when a task links to it. This prevents the use
after free issue when accessing stale and released old mm and its
sched cache stat a task switches to a new mm while account_mm_sched()
is done elsewhere.
The other benefit of this restructure is in the future, the grouping of
tasks to a LLC would have the flexibility to be associated with a user
defined grouping, or cgroup, cookie group, numa_group or others instead
of just with a single mm address space.
Rename sched_cache_stat to sched_cache_group and turn it into a refcounted
object allocated from mm_struct. The mm_struct now holds a pointer
(sched_cache_grp) to this object instead of embedding it.
-
CVE-2026-98384
•
published on October 9, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix out-of-bounds read of sk_protocol in bpf_sock_destroy()
sk_protocol lives in struct sock, not in struct sock_common. A timewait
or request sock handed to bpf_sock_destroy() by the tcp iterator is
neither, so reading sk-sk_protocol runs past the object:
==================================================================
BUG: KASAN: slab-out-of-bounds in bpf_sock_destroy+0xc7/0xe0
Read of size 2 at addr ffff8881047d11b4 by task test_progs/428
Tainted: [W]=WARN
Call Trace:
TASK>
dump_stack_lvl+0x91/0xf0
print_report+0xd1/0x630
kasan_report+0xf3/0x130
__asan_report_load2_noabort+0x14/0x30
bpf_sock_destroy+0xc7/0xe0
bpf_prog_c3dd61f9d9cd9f37_iter_tcp6_timewait+0x9f/0xb7
bpf_iter_run_prog+0x538/0xde0
bpf_iter_tcp_seq_show+0x26b/0x4b0
bpf_seq_read+0x424/0x1210
vfs_read+0x197/0xe40
ksys_read+0x119/0x240
__x64_sys_read+0x72/0xc0
x64_sys_call+0x647/0x27e0
do_syscall_64+0xe5/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Only check sk_protocol on full socks. tcp_abort() already knows how to
deal with TIME_WAIT and NEW_SYN_RECV socks. Also fix the comment, it
never matched the code.
-
CVE-2026-98379
•
published on October 9, 2026
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_rpfilter: reject routes without inet6_dev
ip6_route_lookup() can return an error-free route whose rt6i_idev is
NULL. Lowering an external nexthop device's MTU below IPV6_MIN_MTU tears
down its inet6_dev while fib6_ifdown() leaves routes using nexthop objects
in the FIB. An unprivileged user can construct this state with rtnetlink
in a private user and network namespace, then trigger a NULL dereference
through an IPv6 rpfilter lookup:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000000
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: rpfilter_mt (net/ipv6/netfilter/ip6t_rpfilter.c:75)
Call Trace:
ip6t_do_table (net/ipv6/netfilter/ip6_tables.c:316)
nf_hook_slow (net/netfilter/core.c:619)
ipv6_rcv (net/ipv6/ip6_input.c:351)
__netif_receive_skb_one_core (net/core/dev.c:6216)
process_backlog (net/core/dev.c:6680)
__napi_poll (net/core/dev.c:7739)
net_rx_action (net/core/dev.c:7959)
handle_softirqs (kernel/softirq.c:622)
do_softirq.part.0 (kernel/softirq.c:523)
__local_bh_enable_ip (kernel/softirq.c:450)
__dev_queue_xmit (net/core/dev.c:4913)
packet_sendmsg (net/packet/af_packet.c:3139)
__sys_sendto (net/socket.c:2252)
__x64_sys_sendto (net/socket.c:2259)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Kernel panic - not syncing: Fatal exception in interrupt
Reject routes without an inet6_dev immediately after lookup. Such routes
are not eligible for reverse-path filtering, and the check protects all
later rt6i_idev dereferences.
-
CVE-2026-98374
•
published on October 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
tcp: fix use-after-free of retransmit_skb_hint in tcp_send_synack()
When tcp_send_synack() replaces the cloned SYN skb at the head of the
retransmit queue with a copy, it frees the original with
tcp_rtx_queue_unlink_and_free() and only repairs tp-highest_sack.
tp->retransmit_skb_hint keeps pointing at the freed
skbuff_fclone_cache object.
The dangling hint is read in tcp_verify_retransmit_hint() and used as
the root of the rbtree walk in tcp_xmit_retransmit_queue(). An
unprivileged TFO client (sendmsg(MSG_FASTOPEN)) can arm the hint with
an attacker-supplied ICMP fragmentation-needed message, after which a
simultaneous open frees the armed SYN skb:
BUG: KASAN: slab-use-after-free in tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316)
Read of size 4 at addr ffff88800604d928 by task swapper/1/0
Call Trace:
tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316)
tcp_simple_retransmit (net/ipv4/tcp_input.c:3158)
tcp_v4_err (net/ipv4/tcp_ipv4.c:587)
Sync the hint to the copy.
-
CVE-2026-98370
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
xfrm: fix compat ALLOCSPI request use-after-free
xfrm_state_netlink() builds the ALLOCSPI response with
dump_one_state(), which already calls alloc_compat() with the response
skb and header.
xfrm_alloc_userspi() then calls alloc_compat() again, but passes the
original request skb and its header. For a compat request, the
translator therefore interprets the 228-byte compat xfrm_userspi_info
as the 232-byte native layout and reads four bytes past the declared
payload. It also publishes the translated child through the request's
frag_list.
A multicast clone of the request shares skb_shared_info and can observe
that child. xfrm_user_rcv_msg() frees it after the request handler
returns, racing a compat receiver which may still be copying from it and
resulting in a use-after-free.
Remove the redundant conversion. The response keeps its correct compat
translation from dump_one_state(), and no child is attached to the
inbound request.
-
CVE-2026-98362
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
clk: scpi: bound-check DVFS index in scpi_dvfs_recalc_rate
dvfs_get_idx() may return an out-of-range index if the SCP firmware is
buggy or returns a stale value. Only negative indexes were rejected, so a
large index walked past info-opps and could treat garbage as a clock rate
(KASAN OOB / wrong frequency to consumers). The missing upper bound dates
back to the original SCPI clock driver.
Treat indexes >= opp count as invalid and return 0, same as idx 0.
-
CVE-2026-98355
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs: guard against null kobj name
In the client, if `init_path()` errors, the callee tries to clean up
with `rtrs_clt_close_conns()`. However, this can lead to calling the
event tracing code with `clt_path-kobj->name` being `NULL` and thus
causing a null pointer dereference when trying to copy from it.
This just adds a guard to check that the name is not `NULL` before
copying from it. The server appears to have a similar pattern.
-
CVE-2026-98354
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
RDMA/mad: Fix receive buffer leak when PKey enforcement fails
ib_mad_complete_recv() initializes mad_recv_wc-rmpp_list and then runs
ib_mad_enforce_security() before linking recv_buf onto that list. On
failure it calls ib_free_recv_mad(), which only walks rmpp_list and frees
the ib_mad_private of every buffer found there. As the list is still
empty at that point, nothing is freed at all.
The caller cannot clean up either: ib_mad_recv_done() sets recv to NULL
right after ib_mad_complete_recv() returns, assuming the MAD layer took
ownership of the buffer. Every MAD that fails the PKey check therefore
leaks one ib_mad_private (about 300 bytes per IB port MAD, ~2K for OPA),
and a remote node can trigger this repeatedly by sending MADs with a
wrong PKey.
Link recv_buf onto rmpp_list right after the list is initialized, so the
error path has something to free.
-
CVE-2026-98351
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: virt_wifi: free skb when disconnected
When the simulated link is disconnected, virt_wifi_start_xmit() returns
NET_XMIT_DROP without freeing the skb. dev_hard_start_xmit() treats this
return value as consumed, so every packet sent while disconnected leaks its
skb.
Free the skb before returning the drop status.