-
CVE-2026-98341
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't free driver-owned scan requests
When an interface goes down while a scan is running, cfg80211 completes
the scan towards userspace and frees the scan request. However, the
driver can be convinced that it owns the request, since the cancellation
is (intended to be) asynchronous.
The WARN_ON() in the netdev notifier was meant to catch this, but it's
not actually avoidable, so it triggers and we get a UAF in scan_done().
There doesn't seem to be a great way around it, so just track that the
driver is still convinced it owns the request, and then just free it on
completion if it was already cancelled. Also remove the warnings since
they can trigger in the intended architecture.
-
CVE-2026-98340
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: only group hidden BSSes with beacon entries
When a probe response for an unknown BSS comes in, __cfg80211_bss_update()
looks for an existing entry with the same BSSID and a hidden (zero-length
or NUL-filled) SSID, and if it finds one it groups them, using the beacon
IEs from the existing entry.
But that could find another entry without a beacon, if it was also from a
probe response (with SSID), so there's a group without beacon elements.
If a beacon with a hidden SSID for that BSSID arrives later,
cfg80211_combine_bsses() goes looking for the probe response entries that
belong to it - i.e. entries with the same BSSID and channel that have no
beacon IEs - and finds those two. They are already grouped with each
other, so it hits its
WARN_ON_ONCE(bss-pub.hidden_beacon_bss)
WARN_ON_ONCE(!list_empty(&bss->hidden_list))
which are there because an entry without beacon elements is not supposed
to be part of a group yet.
Only combine entries when a beacon was already received, ones that are
kept separate will be combined when a beacon arrives.
-
CVE-2026-98339
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't filter by BSS type when removing stale entries
When an assoc AP switches to a channel that already has a BSS entry,
cfg80211_update_assoc_bss_entry() removes that entry before rehashing
the real one, since the two would otherwise collide in the BSS rbtree.
The lookup for that entry also required it to match the connection's BSS
type, so an entry advertising e.g. the IBSS capability bit was left in
place, and the following cfg80211_rehash_bss() then ran into it:
WARN_ON(!cmp)
Changing the type shouldn't really happen, but can be triggered by a
rogue AP/device, so drop the check and remove any entries matching
the comparison.
-
CVE-2026-98326
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: mesh: release the channel if start fails
ieee80211_join_mesh() acquires a channel context and then calls
ieee80211_start_mesh(), which can fail. In that case, the chanctx
isn't released then interface removal will attempt to unassign it
after it's removed from the driver, hitting:
wlan0: Failed check-sdata-in-driver check, flags: 0x0
WARNING: net/mac80211/driver-ops.c:366 at drv_unassign_vif_chanctx
ieee80211_assign_link_chanctx
__ieee80211_link_release_channel
ieee80211_link_release_channel
ieee80211_teardown_sdata
unregister_netdevice_many_notify
_cfg80211_unregister_wdev
ieee80211_remove_interfaces
ieee80211_unregister_hw
mac80211_hwsim_del_radio
hwsim_exit_net
Correctly release the channel on start failures.
-
CVE-2026-98317
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
neighbour: Enforce min/max to NDTPA_INTERVAL_PROBE_TIME_MS.
NDTPA_INTERVAL_PROBE_TIME_MS sets .type and .min but misses
.validation_type, so no validation is applied:
# ynl --family rt-neigh --do setneightbl \
--json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 0}}'
# ynl --family rt-neigh --dump getneightbl --output-json | \
jq '.[] | select(.name == "arp_cache" and has("config"))
| .parms["interval-probe-time-ms"]'
0
Moreover, nla_get_msecs() uses msecs_to_jiffies(), and u64 is
silently cast to u32, so a larger value can bypass the min check:
e.g. 4294967296 == 0x100000000
# ynl --family rt-neigh --do setneightbl \
--json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 4294967296}}'
# ynl --family rt-neigh --dump getneightbl --output-json | \
jq '.[] | select(.name == "arp_cache" and has("config"))
| .parms["interval-probe-time-ms"]'
0
msecs_to_jiffies() returns MAX_JIFFY_OFFSET if the value is
larger than INT_MAX. Also, INT_MAX ms overflows int NEIGH_VAR()
when HZ 1000 (Alpha, MIPS), and passing a negative integer to
queue_delayed_work(unsigned long delay) causes sign extension,
which wraps around the expiry time to the past, resulting in it
being handled as 0 delay in the timer wheel.
Let's use NLA_POLICY_FULL_RANGE() and limit the max to 1 day.
The same max check is applied to sysctl as well.
Note that this controls the probe interval for NTF_MANAGED
entries, so the max of 1 day is unlikely to break any
deployments.
-
CVE-2026-98316
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
ALSA: bcd2000: Fix race between rawmidi and disconnect
Although we tried to fix the potential UAF issues at USB disconnect on
bcd2000 driver, there is still an overlooked case -- namely, when a
rawmidi trigger callback has been already running at USB disconnect
handling, the in-flight function (e.g. bcd2000_midi_send()) could
still access the URB, because the previous URB NULL-check & clearance
was considered only for the URB complete callbacks, but not about the
parallel rawmidi operations.
For addressing the race, this patch introduced a new spinlock that
covers each rawmidi operation as well as the rawmidi handling in the
complete callback. The URB is cleared with the lock, so it guarantees
that the pending rawmidi task already finished or a NULL check is
effective.
-
CVE-2026-98311
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: virt_wifi: don't transfer operstate before register
virt_wifi_newlink() calls netif_stacked_transfer_operstate() before
register_netdevice(). If the lower device is dormant, that queues the
new netdev on lweventlist while it is still uninitialized. If
registration fails after that, for example because of an invalid name
such as "bad/name", free_netdev() immediately frees the object. A
later linkwatch_fire_event() then use-after-frees the list entry.
Move the transfer to after netdev_upper_dev_link(), as macvlan and
ipvlan already do.
-
CVE-2026-98304
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: restore the hardware filters on open
bcmgenet_hfb_init() runs INIT_LIST_HEAD() on priv-rxnfc_list, which drops
every rule off the list, and bcmgenet_open() calls it on each ifup. Every
rule the user configured is silently lost:
# ethtool -N eth0 flow-type ether dst $MAC action 0
Added rule with ID 0
# ethtool -n eth0 | grep -c Filter:
1
# ip link set eth0 down && ip link set eth0 up
# ethtool -n eth0 | grep -c Filter:
0
Initialise the lists once at probe and restore the rules on open, as
bcmgenet_resume() already does.
-
CVE-2026-98294
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: Do not write to the serial port after it is closed
hci_uart_close() closes the serdev port if HCI_QUIRK_NON_PERSISTENT_SETUP
is set (for example, for the WCN399x family). A failed hci_dev_open_sync()
following a successful qca_setup() calls hdev-close() but not
hdev->shutdown(), so the port is closed while power->vregs_on is left true.
qca_serdev_remove() then passes its power->vregs_on test and calls
qca_power_off(), which writes to the closed port unconditionally.
Seen on a WCN3988 by unbinding the driver after a controller failure. The
trace below is from a 7.0.0 based kernel, where qca_power_off() was still
named qca_power_shutdown():
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000038
Call trace:
tty_set_termios+0x50/0x238 (P)
ttyport_set_baudrate+0x84/0xc0
serdev_device_set_baudrate+0x24/0x40
qca_power_shutdown+0x158/0x1fc [hci_uart]
qca_serdev_remove+0x54/0x68 [hci_uart]
serdev_drv_remove+0x1c/0x2c
device_remove+0x4c/0x80
device_release_driver_internal+0x1cc/0x224
device_driver_detach+0x18/0x24
unbind_store+0xb4/0xc0
Check HCI_UART_PROTO_READY, which hci_uart_close() clears in the same place
it closes the port, before writing to it. The regulator disable is left
unconditional so the controller is still powered down.
The dangling serport->tty that turns this into a use-after-free is
addressed in a separate patch.
-
CVE-2026-98287
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
pppoatm: ensure a writable skb header and linear data
In pppoatm_send(), LLC encapsulation checks whether there is sufficient
headroom for the 4-byte LLC header, but does not ensure that the skb header
is writable.
Normal transmit packets passing through ppp_start_xmit() have their header
unshared via skb_cow_head(). However, packets can also reach pppoatm_send()
via PPP channel bridging (PPPIOCBRIDGECHAN) without going through
ppp_start_xmit().
Use skb_cow_head() to ensure both sufficient headroom and a writable
header before pushing the LLC header.
While at it:
- Call pskb_may_pull(skb, 1) before inspecting skb-data[0] to prevent
out-of-bounds reads on zero-length or non-linear frames (e.g. from
bridging).
- Defer SC_COMP_PROT protocol compression until after pppoatm_may_send()
succeeds. This eliminates the temporary skb allocation on admission failure
and completely removes the fragile "undo" heuristic at the nospace label,
avoiding any risk of reading uninitialized headroom or performing an
unbalanced skb_push().
-
CVE-2026-98282
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
powerpc/iommu: Fix the overflow validation in iommu_tce_check_ioba
The commit b1af23d836f8 ("KVM: PPC: iommu: Unify TCE checking") unified
IOBA parameter checking across KVM and VFIO into iommu_tce_check_ioba().
While doing so, the passed in argument npages is ignored and constant
value '1' is used leaving out a possible overflow as the callers can
legitimately be using npages 1 for H_STUFF_TCE or H_PUT_TCE_INDIRECT
cases.
Fix this by accounting for 'npages', checking for arithmetic overflow,
and verifying that the entire requested range (ioba - offset + npages)
does not exceed the table capacity 'size'.
-
CVE-2026-98278
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: remove WARN_ON_ONCE() from the dev_fill_forward_path() loop check
ipip_fill_forward_path() and ip6_tnl_fill_forward_path() look up the
route to the tunnel's remote endpoint and set ctx-dev to its device,
which is the tunnel itself when that route resolves back to the tunnel.
dev_fill_forward_path() then makes no progress and trips
WARN_ON_ONCE(last_dev == ctx->dev) as soon as a flowtable tries to
offload a flow through the tunnel. That routing loop is a configuration
any CAP_NET_ADMIN user can set up, and ip_tunnel_xmit() and
ip6_tnl_xmit() already treat it as a tx error, so remove the warning and
just fail the walk, as commit 008e7a7c293b ("net: remove WARN_ON_ONCE
when accessing forward path array") did for the path stack overflow.
-
CVE-2026-98787
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix missing migration protection in __rhtab_map_lookup_and_delete_batch()
bpf_mem_cache_free_rcu() uses this_cpu_ptr() which requires migration
to be disabled. All callers of rhtab_delete_elem() disable migration
except __rhtab_map_lookup_and_delete_batch(), which calls it under
rcu_read_lock() only.
On CONFIG_PREEMPT_RCU, rcu_read_lock() does not disable preemption or
migration, so the task can migrate between CPUs during the delete loop,
causing this_cpu_ptr() to trigger:
BUG: using smp_processor_id() in preemptible [00000000] code
Fix by wrapping the delete loop in migrate_disable()/migrate_enable()
in __rhtab_map_lookup_and_delete_batch(), matching the migration
protection that the other callers already provide.
-
CVE-2026-98779
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix ACP MFD device leak on init failure
acp_hw_init() registers ACP child devices with mfd_add_devices() before
attaching them to the ACP power domain and initializing the hardware.
If attaching a child to the power domain fails, or if the ACP reset or
clock enable operation times out, the failure path frees only the
source cell, resource, and platform-data allocations. The child
platform devices already registered by mfd_add_devices() remain
registered and are never released.
Remove the children from the power domain and unregister the MFD
devices on failures that occur after mfd_add_devices() succeeds. Keep
mfd_add_devices() failures on the existing cleanup path since the MFD
core already rolls back partially registered children itself.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
(cherry picked from commit 63da68d6a2279ec945581c990c5a59a5ae8b5560)
-
CVE-2026-98777
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
binder: fix leaked fd fixups on TF_UPDATE_TXN supersede
When a TF_UPDATE_TXN transaction supersedes a pending async transaction
in a frozen process, the outdated transaction is freed with kfree()
directly. This skips binder_free_txn_fixups(), leaking all
binder_txn_fd_fixup entries and their fget()'d struct file references.
The leaked file refcounts never reach zero, so the struct file objects
are permanently pinned in memory. They survive process exit and
accumulate across invocations until file-max exhaustion.
Every other transaction cleanup path (binder_free_transaction(),
binder_transaction() error paths, binder_release_work()) correctly
calls binder_free_txn_fixups(). Add the missing call before kfree()
in the t_outdated cleanup block.
-
CVE-2026-98776
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
binderfs: fix UAF write in binder_add_device
binderfs_binder_device_create() publishes the new dentry with
d_make_persistent() and then calls simple_done_creating(), which drops
the parent directory lock and the creator's dentry reference. It then
calls binder_add_device() to register the device in the global
binder_devices list.
After simple_done_creating() releases the parent directory lock, a
concurrent unlinkat() can remove the new device entry. Dropping the
creator's dentry reference can then trigger binderfs_evict_inode(),
freeing the device. binder_add_device() later accesses the freed
object, causing UAF write.
Found by a modified Syzkaller:
BUG: KASAN: slab-use-after-free in hlist_add_head include/linux/list.h:1073 [inline]
BUG: KASAN: slab-use-after-free in binder_add_device+0xa9/0xc0 drivers/android/binder.c:7068
Write of size 8 at addr ffff88805b340c00 by task syz.1.532/11389
CPU: 0 UID: 0 PID: 11389 Comm: syz.1.532 Not tainted 7.2.0 #4 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
TASK
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x10e/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xf7/0x600 mm/kasan/report.c:482
kasan_report+0xe4/0x120 mm/kasan/report.c:595
hlist_add_head include/linux/list.h:1073 [inline]
binder_add_device+0xa9/0xc0 drivers/android/binder.c:7068
binderfs_binder_device_create.isra.0+0x724/0x990 drivers/android/binderfs.c:196
binder_ctl_ioctl+0x186/0x1b0 drivers/android/binderfs.c:241
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff9027a833d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ff903674018 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ff902a35fa0 RCX: 00007ff9027a833d
RDX: 0000200000000500 RSI: 00000000c1086201 RDI: 0000000000000004
RBP: 00007ff902850733 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ff902a36038 R14: 00007ff902a35fa0 R15: 00007ffd7166bfa0
Allocated by task 11389:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:57
kasan_save_track+0x14/0x30 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__kmalloc_cache_noprof+0x2e4/0x6f0 mm/slub.c:5489
_kmalloc_noprof include/linux/slab.h:988 [inline]
_kzalloc_noprof include/linux/slab.h:1309 [inline]
binderfs_binder_device_create.isra.0+0x17a/0x990 drivers/android/binderfs.c:148
binder_ctl_ioctl+0x186/0x1b0 drivers/android/binderfs.c:241
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 11389:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:57
kasan_save_track+0x14/0x30 mm/kasan/common.c:78
kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:253 [inline]
__kasan_slab_free+0x5f/0x80 mm/kasan/common.c:285
kasan_slab_free include/linux/kasan.h:235 [inline]
slab_free_hook mm/slub.c:2677 [inline]
slab_free mm/slub.c:6377 [inline]
kfree+0x2fc/0x6e0 mm/slub.c:6692
binderf
---truncated---
-
CVE-2026-98768
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
usb: typec: anx7411 - stop the IRQ before destroying the workqueue
The IRQ is devm-managed, so it can still queue plat-work while
remove() is tearing the queue down. Disable it first.
-
CVE-2026-98766
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: aspeed-vhub: cancel wake work on device removal
wake_work is armed from the gadget .wakeup callback to resume suspended
downstream ports, and it is never cancelled in ast_vhub_remove(), so a
work item queued before or during removal can run after devm has freed
vhub and its ports, a use-after-free.
Cancelling the work alone is not sufficient: usb_gadget_wakeup() takes
no lock and the unbind path never clears wakeup_en, so a remote-wakeup
request in flight on another CPU can re-arm the work after the cancel
and before vhub is freed.
ast_vhub_del_dev() already clears d-registered under vhub->lock before
unregistering the gadget. Refuse the wakeup in ast_vhub_udc_wakeup()
once d->registered is clear: the check and the schedule_work() are then
atomic against the unbind, so a wakeup that passed before the flag was
cleared is drained by the cancel_work_sync() after the del_dev loop,
and one that arrives later returns without arming. Also move INIT_WORK()
to the top of ast_vhub_probe(), since the probe error path reuses
ast_vhub_remove() and would otherwise cancel a never-initialized work
item.
This issue was found by an in-house static analysis tool.
-
CVE-2026-98763
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
usb: core: clear both ep_in and ep_out for non-ep0 control endpoints
In usb_enable_endpoint(), non-zero control endpoints (where
usb_endpoint_xfer_control(&ep-desc) is true) populate both
dev->ep_in[epnum] and dev->ep_out[epnum] with the same struct
usb_host_endpoint pointer.
However, usb_disable_endpoint() only clears either dev->ep_out[epnum] or
dev->ep_in[epnum] depending on the direction bit of epaddr when
reset_hardware is set, leaving the opposite direction's array slot
pointing to the disabled/freed endpoint.
Clear both dev->ep_out[epnum] and dev->ep_in[epnum] when disabling a
non-ep0 control endpoint with reset_hardware set, and update the
function kerneldoc accordingly.
Tested in QEMU against Linux 7.3.0-rc3 using dummy_hcd and raw-gadget to
enumerate a USB device with a non-zero control endpoint
(bEndpointAddress 0x01, bmAttributes USB_ENDPOINT_XFER_CONTROL),
verifying that both dev->ep_in[1] and dev->ep_out[1] are cleared when
the interface is disabled.
-
CVE-2026-98760
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tipd: fix uninitialized typec_partner_desc in tps6598x_connect()
tps6598x_connect() passes a stack-allocated typec_partner_desc to
typec_register_partner() after initializing only usb_pd, accessory and
identity.
typec_register_partner() copies attach and deattach from the descriptor
into the partner. With those fields left unset, garbage function pointers
may be stored and later invoked from typec_partner_link_device() when a USB
device is linked to the port. Uninitialized pd_revision and usb_capability
similarly leak stack data through partner sysfs.
Zero-initialize the descriptor so optional callbacks remain NULL and the
remaining fields are zero.