-
CVE-2026-98244
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
btrfs: clear free space tree creation state on rebuild failure
btrfs_rebuild_free_space_tree() sets BTRFS_FS_CREATING_FREE_SPACE_TREE
before rebuilding the free space tree. Several error paths return
without clearing this flag.
The transaction restart failure path can leave the flag set on a live
filesystem, causing delayed reference processing to be skipped. Clear it
on all free space tree rebuild failure paths. Keep
BTRFS_FS_FREE_SPACE_TREE_UNTRUSTED set, since a failed rebuild leaves
the free space tree untrusted. Callers must fall back to extent-tree
caching.
-
CVE-2026-98243
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
dma-buf/dma-fence: fix checking signaling bit for timeline and driver name v3
The patch "dma-buf: dma-fence: Fix potential NULL pointer dereference"
changed the check to test for the ops pointer instead of the signaled
bit to avoid a potential NULL dereference when the ops pointer has been
cleared.
The problem is now that the ops pointer is cleared only when neither the
release nor the wait callback is implemented and this isn't true for a lot
of dma_fence implementations yet. So those implementations lost the RCU
protection after signaling of the returned string resulting in potential
use after free.
Add the signaling check additional to the ops pointer check so that we
have both the protection against NULL dereference as well as the RCU
protection after signaling for the returned string.
v2: improve comments to note RCU protection and explain why we check
both signaling state and ops pointer
v3: some comment improvements suggested by Philip
-
CVE-2026-98238
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: validate the netif index in t7xx_ccmni_recv_skb()
The netif index carried in the DPMAIF PIT header is five bits wide,
but ccmni_inst[] only has room for NIC_DEV_MAX (21) entries.
t7xx_ccmni_recv_skb() indexes the array without a bounds check, so
indexes 21 to 31 read past it. The out-of-bounds value lands in the
callback table that follows the array, which is never NULL, so the
existing !ccmni check does not catch it and the driver dereferences
whatever sits there as a struct t7xx_ccmni.
Drop the skb when the index is out of range.
Verified in a QEMU guest with a fault injector setting the netif
index to 25: the unpatched driver reads a value past ccmni_inst[],
which lands in the callback table, and dereferences it far enough to
queue the skb. With this check the packet is dropped. Well-formed
traffic on index 0 is unaffected.
Changes in v2: none.
-
CVE-2026-98234
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/sched: hhf: cap hh_flows_limit at change time
hhf_change() stores TCA_HHF_HH_FLOWS_LIMIT with no upper bound. A huge
hh_flows_limit lets each new heavy-hitter flow pass the
hh_flows_current_cnt check in alloc_new_hh() and forces a fixed-size
kzalloc(GFP_ATOMIC) per flow under spoofed traffic, for unbounded memory
growth.
Bound the attribute with NLA_POLICY_MAX() at 2*HH_FLOWS_CNT (the
hhf_init() default) and report the rejected value via extack. The
deprecated nested parse is kept: legacy tc does not set NLA_F_NESTED on
TCA_OPTIONS. Configs relying on hh_limit above the default were relying
on unbounded, unsafe behaviour and are not supported going forward.
hhf_init() also ran hhf_change() before setting the default
hh_flows_limit, so a user-supplied hh_limit at add time was clobbered
back to 2048. Set the default before hhf_change() so the configured
value sticks.
This is a follow-up to commit eb56a495f59b ("net/sched: hhf: clamp
quantum in change and init paths"), which bounded the quantum of the
same qdisc; the hh_flows_limit bound is the remaining unbounded knob of
that series' scope.
Conditions to recreate the bug: CAP_NET_ADMIN in a user namespace;
tc qdisc change dev X root hhf hh_limit 4294967295 succeeds and the
value is echoed by tc qdisc show, unbounding heavy-hitter flow
allocations; also tc qdisc add dev X root hhf hh_limit 500 stores 2048
instead of 500.
-
CVE-2026-98231
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
xfrm: serialize state GC with device state flush
The deferred-device pass in xfrm_dev_state_flush() finds states under
xfrm_state_dev_gc_lock, but drops the lock before calling
xfrm_dev_state_free() because the driver callback may sleep. The device
GC list does not hold an xfrm_state reference, so the state GC worker can
destroy the same state concurrently.
The race can proceed as follows:
CPU 0 CPU 1
find x on the device GC list
drop xfrm_state_dev_gc_lock
read x-xso.dev
xfrm_state_gc_destroy(x)
xfrm_dev_state_free(x)
xfrm_state_free(x)
continue xfrm_dev_state_free(x)
Both paths can invoke the driver callback and drop the device reference.
CPU 0 can also access the xfrm_state after CPU 1 has freed it.
KASAN reported:
BUG: KASAN: slab-use-after-free in xfrm_dev_state_free+0x24c/0x2a0
Read of size 8 at addr ffff88810bbaa960 by task poc/102
Call Trace:
xfrm_dev_state_free+0x24c/0x2a0
xfrm_dev_state_flush+0x353/0x400
xfrm_dev_event+0x26d/0x3a0
notifier_call_chain+0xc0/0x280
__dev_notify_flags+0x169/0x250
netif_change_flags+0xe7/0x160
dev_change_flags+0x96/0x220
devinet_ioctl+0x7f4/0x1880
Allocated by task 87:
xfrm_state_alloc+0x1e/0x5c0
xfrm_add_sa+0xe7f/0x5820
xfrm_user_rcv_msg+0x4f3/0x940
Freed by task 57:
kmem_cache_free+0xcb/0x3d0
xfrm_state_gc_task+0x4a8/0x650
process_one_work+0x63a/0x1070
Serialize xfrm_state destruction against the deferred-device pass with a
mutex. Keep xfrm_state_dev_gc_lock limited to list operations and retain
the existing callback and device-reference release ordering.
-
CVE-2026-98226
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
mm, swap: fix SWAP_USAGE_OFFLIST_BIT collision with real usage count
SWAP_USAGE_OFFLIST_BIT is embedded in the si-inuse_pages usage counter,
and is meant to sit above any value that counter can reach. However, it
is defined from BITS_PER_TYPE(atomic_t), so it is bit 30. On a system
with 4 KiB pages the flag collides with the usage count once that count
reaches 4 TiB.
swap_usage_in_pages() masks bit 30 out, so whenever the real count has
that bit set, every caller of it reads 4 TiB low:
* /proc/swaps understates Used by 4 TiB.
* A raw count of exactly 2^30 masks to zero, so try_to_unuse() takes its
"if (!swap_usage_in_pages(si)) goto success;" early exit and swapoff
tears the device down while pages are still swapped out. Nothing in
the rest of swapoff aborts the teardown, so those pages are lost.
Independently of swapoff, the collision also corrupts the counter and the
plist. On a device in normal use, a free that leaves bit 30 set in the
count makes swap_usage_sub() see the flag where there is only count, and
call add_to_avail_list(). It clears the bit with
fetch_and(~SWAP_USAGE_OFFLIST_BIT), leaving the stored count 4 TiB below
the real one, and calls plist_add() on a device that is already listed,
tripping the WARN_ON(!plist_node_empty(node)) in plist_add() and linking
the node a second time.
Change the definition of SWAP_USAGE_OFFLIST_BIT to be based on
atomic_long_t instead. Note that the usage counter field itself is of
this same type, so it is still a valid bit.
-
CVE-2026-98220
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix NULL sched deref in kfunc sub-sched error paths
When the root scheduler has sub-scheds attached, the COMPAT kfunc
wrappers scx_bpf_select_cpu_and() and scx_bpf_dsq_insert_vtime() refuse
the call and report to @p's scheduler:
scx_error(scx_task_sched(p), "... must be used");
The wrappers are reachable with tasks that have no scheduler.
scx_bpf_select_cpu_and() is in the select_cpu kfunc group, which
scx_kfunc_context_filter() opens to BPF_PROG_TYPE_SYSCALL programs;
scx_bpf_dsq_insert_vtime() is in the enqueue_dispatch group, which
ops.enqueue() and ops.dispatch() may call with any KF_RCU task -- the
group has no kf_tasks validation, and scx_dsq_insert_preamble() checks
task ownership with scx_task_on_sched() precisely because @p may be an
arbitrary task.
scx_task_sched(p) is p-scx.sched, which is NULL for tasks past
sched_ext_dead() -- which clears it via scx_disable_and_exit_task() on
exit -- and for idle tasks, which the enable paths skip as they are
never scheduled through SCX. It is also an rcu_dereference_protected()
that expects @p's pi_lock or rq lock, which neither wrapper holds.
Passing NULL to scx_error() reaches scx_vexit(), which dereferences
sch->exit_info, oopsing the kernel.
One concrete trigger exercised while developing the fix: a
BPF_PROG_TYPE_SYSCALL program calling the select_cpu_and wrapper on an
exited-but-not-reaped task while a sub-scheduler was attached (its pid
stays findable while the zombie is unreaped; faulting instruction is
the scx_vexit() prologue "mov r15,[rdi+0x398]" with RDI=NULL and 0x398
the offset of sch->exit_info):
sched_ext: BPF scheduler "kfunc_subsched_null" enabled
sched_ext: BPF sub-scheduler "kfunc_subsched_null" enabled
sched_ext: Unassociated program run_select_cpu_ (id 76)
BUG: kernel NULL pointer dereference, address: 0000000000000398
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 7 UID: 0 PID: 8201 Comm: kfunc_test_runn Tainted: G W
RIP: 0010:scx_vexit+0x25/0xa0
Code: ... 4c> 8b bf 98 03 00 00 ...
CR2: 0000000000000398
Call Trace:
__scx_exit+0x4f/0x70
scx_bpf_select_cpu_and+0xab/0xb0
bpf_prog_430ed61a7b66e03a_run_select_cpu_and+0x9c/0xe7
? __x64_sys_bpf+0x2c/0x40
bpf_prog_test_run_syscall+0x130/0x2f0
__sys_bpf+0x930/0x10d0
? __x64_sys_bpf+0x2c/0x40
__x64_sys_bpf+0x2c/0x40
do_syscall_64+0xbc/0x460
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Read @p's scheduler under RCU instead, which the wrappers can do from
their guard(rcu)(): fault it when it can be determined, and when it
can't be determined -- @p is a task past sched_ext_dead() or an idle
task -- there is nothing obviously wrong to report, so just refuse the
call as before without faulting any scheduler.
These COMPAT wrappers are scheduled for eventual removal once the
deprecation grace period elapses, but until then -- and regardless of
their removal timeline -- they must not oops the kernel on a task they
are handed.
-
CVE-2026-98215
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
selinux: preserve user SID across nested backing files
SELinux saves the user file SID in a backing-file security blob so it
remains available after mmap() replaces vma-vm_file with a backing file.
For nested backing files (overlayfs over overlayfs, or FUSE passthrough
backed by overlayfs), user_file may itself be a backing file. Its
fsec->sid is the SID of the mounter that opened it, rather than the user
that opened the top-level file. mprotect() then checks fd { use } against
the mounter SID. This can incorrectly deny access without a domain
transition, or check the wrong target SID after one.
Copy the saved user SID when user_file is a backing file. Keep using the
regular file SID for the first backing layer.
With two nested overlayfs mounts and SELinux enforcing,
mprotect(PROT_READ) returns EACCES with an fd { use } denial against the
mounter SID. With this change, mprotect() succeeds.
Tested on arm64 QEMU with a small BusyBox initramfs and a purpose-built
SELinux policy. The original test was also repeated with Fedora Cloud
Base 44 userspace and gave the same result.
-
CVE-2026-98208
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
mmc: sdio_uart: fix xmit_fifo leak when the port table is full
sdio_uart_add_port() allocates the transmit fifo before claiming a
slot in sdio_uart_table[]. When all UART_NR slots are taken, it
returns -EBUSY with the fifo still allocated, but the probe error
path only kfree()s the port, leaking the transmit fifo.
Free the fifo in the failure path of sdio_uart_add_port() itself so
the function retains nothing on error.
-
CVE-2026-98206
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
Input: cyttsp5 - clamp the HID report size before memcpy
The size field comes from the device and is used as the memcpy()
length into response_buf, which is CY_MAX_INPUT bytes.
-
CVE-2026-98204
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
Input: rmi_smbus - fix out-of-bounds read in rmi_smb_write_block()
When chunking writes into SMBus blocks in rmi_smb_write_block(), the
loop calculates block_len using the original total length (len) instead
of the remaining length (cur_len).
If len is greater than 32 bytes (SMB_MAX_COUNT), block_len remains 32
for every iteration, even on the final partial chunk where fewer than 32
bytes remain. This causes smb_block_write() to read 32 bytes from the
advanced data buffer pointer, reading past the end of the input buffer.
Fix this by calculating block_len using cur_len and advancing the buffer
and address pointers by block_len.
-
CVE-2026-98200
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (hp-wmi-sensors) Fix use-after-free in fungible_show()
nsensor-current_state is dynamically replaced as the sensor's state
changes. update_numeric_sensor_from_wobj() does this by freeing the
old string and installing a new one:
if (strcmp(trimmed, nsensor->current_state)) {
new_string = hp_wmi_strdup(dev, trimmed);
if (new_string) {
devm_kfree(dev, nsensor->current_state);
nsensor->current_state = new_string;
}
}
This function is only ever called from hp_wmi_update_info() while
state->lock is held, so the free-and-replace itself is properly
serialized against concurrent updates.
fungible_show(), however, reads the same pointer after the lock has
already been dropped:
err = hp_wmi_update_info(state, info);
if (err)
return err;
switch (prop) {
...
case HP_WMI_PROPERTY_CURRENT_STATE:
seq_printf(seqf, "%s\n", nsensor->current_state);
break;
hp_wmi_update_info() takes state->lock internally and releases it
before returning, so by the time fungible_show() dereferences
nsensor->current_state in seq_printf(), no lock is held. Two
processes reading a sensor's current_state debugfs entry at
overlapping times (or one reading it while another read of the same
sensor triggers a refresh) can race: one thread's seq_printf() can
be part-way through printing the string at the moment another
thread's call into update_numeric_sensor_from_wobj() frees it with
devm_kfree() and installs a new pointer, causing a use-after-free
read.
Take state->lock around the read in fungible_show() as well, so it
can never run concurrently with the free-and-replace in
update_numeric_sensor_from_wobj().
-
CVE-2026-98199
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) increase number of phases and add new mask
Increase the number of phases to 16 as a new upcoming device supports
such a number.
While at it, add a new mask for controlling the source of the output
voltage.
Note (groeck):
This patch was meant to prepare for support of MAX20826 and compatible
devices, which support more than 10 phases per page. However, Sashiko
reports that the mp2975 driver already supports up to 14 phases, and the
mp2856 driver supports up to 12 phases. This already has the potential for
out-of-bounds writes when probing the affected chips, making this patch a
bug fix.
-
CVE-2026-98196
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmsmac: fix UAF in brcms_free_timer()
brcms_free_timer() calls brcms_del_timer() which uses the non-synchronous
cancel_delayed_work() to cancel the timer's underlying delayed work. If
the work callback (_brcms_timer) is already running, cancel_delayed_work()
returns false without waiting, and brcms_free_timer() proceeds to kfree(t)
while the callback still accesses t through container_of().
Add an explicit cancel_delayed_work_sync() after brcms_del_timer() to
guarantee that any in-flight callback has completed before the timer
structure is freed.
-
CVE-2026-98192
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: wcn36xx: Fix potential use-after-free in TX ack timer teardown
wcn36xx_dxe_deinit() tears down the TX ack timer with timer_delete(),
which only dequeues the timer and does not wait for a callback that is
already executing; the preceding free_irq() calls synchronize the
interrupt handlers only. The callback, wcn36xx_dxe_tx_timer(), can
therefore be running past the teardown and use the wcn freed along
with the ieee80211_hw in wcn36xx_remove(): it takes wcn-dxe_lock,
reads wcn->tx_ack_skb and passes wcn->hw to
ieee80211_tx_status_irqsafe().
Fix this by using timer_shutdown_sync(), which waits for a running
callback and also prevents the timer from being rearmed again. The
timer is set up again by wcn36xx_dxe_init() on the next start, so the
start/stop cycle is unaffected.
This issue was found by an in-house static analysis tool.
-
CVE-2026-98191
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: release runtime PM ref on regdomain config failure
wlcore_regdomain_config() gets a runtime PM reference before sending
the regulatory-domain command. When
wlcore_cmd_regdomain_config_locked() fails, the function queues recovery
and returns without dropping that reference.
Release the reference after handling the command result so both success
and failure paths balance the preceding
pm_runtime_resume_and_get(). The recovery worker takes a separate
runtime PM reference and cannot release the reference held here.
-
CVE-2026-98189
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix RX buffer OOB-write in wilc_wlan_handle_isr_ext()
wilc_wlan_handle_isr_ext() takes the RX transfer size from the
device-reported interrupt status register (a 15-bit field shifted left by 2,
up to 131068 bytes) and reads that many bytes from the device into
rx_buffer, which is only WILC_RX_BUFF_SIZE (96K) large. The wrap
check only handles the current offset; the size itself is never
compared against the buffer, so a bogus SDIO device can make the driver
OOB-write rx_buffer by up to ~32K with data it controls.
The oversized transfer also leaves rx_buffer_offset past the end of
the buffer, after which the unsigned wrap check stops working and
the overflow can repeat.
Drop any transfer whose size exceeds the RX buffer, acknowledging
the data interrupt and re-arming the RX engine so the bogus frame is
discarded and reception can continue. This also restores the
rx_buffer_offset = WILC_RX_BUFF_SIZE invariant the wrap check
relies on.
This is not expected to change driver behavior in most cases:
without this check, an oversized transfer would most likely
corrupt neighboring kernel memory instead of completing anyway, and
the drop path performs the same interrupt acknowledgment and RX
engine re-arming as the normal path, so subsequent transfers are
received unaffected.
Discovered by Atuin - Automated Vulnerability Discovery Engine.
-
CVE-2026-98185
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: validate scan response extents
mwifiex_ret_802_11_scan() subtracts the fixed response fields and the
firmware-provided BSS length from resp-size without first proving that
either extent fits. A short response or oversized BSS length can
therefore underflow tlv_buf_size and make the TLV parser walk beyond the
command response.
Compute the fixed extent from the selected normal or background scan
response. Validate that the fixed fields and BSS data fit before deriving
the TLV extent and entering the parser.
-
CVE-2026-98184
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: prevent authentication frame length truncation
mwifiex_cfg80211_authenticate() derives the authentication frame length
from req-ie_len and req->auth_data_len, both of type size_t, but stores
it in a u16.
NL80211_ATTR_AUTH_DATA only has a minimum length policy. Since nla_len is
a u16, a single attribute can carry up to 65531 bytes of payload, so the
sum can exceed U16_MAX before it is assigned to pkt_len. The truncated
pkt_len determines the skb frame area, while the copy length remains
req->auth_data_len - 4, resulting in a heap buffer overflow.
For example, with auth_data_len equal to 65510 and no IEs, the sum is
65546. It is truncated to 10 and then reduced by four to 6. The driver
appends only six bytes to the skb with skb_put(), but then copies 65506
user-provided bytes into the authentication body.
Reaching this path requires CAP_NET_ADMIN in the user namespace owning
the network namespace, an up station netdev, and a suitable BSS/SAE
authentication request.
Compute the length in size_t, reject values that cannot be represented by
the firmware's u16 frame length field, and only then assign it to pkt_len.
-
CVE-2026-98183
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: avoid out-of-bounds read for empty PREQ elements
ieee80211_mesh_preq_size_ok() derives the location of the PREQ bottom
fields before checking whether the element contains even the fixed
header. ieee80211_mesh_hwmp_preq_get_bottom() reads the flags byte to
account for the optional Address Extension field. Consequently, an
empty PREQ element causes a one-byte read beyond its declared payload.
Move the helper call after both size checks, so the bottom fields are
only accessed when they are present.