-
CVE-2026-98181
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/gud: fix out-of-bounds write in gud_plane_atomic_check()
The plane property loop uses req-properties[num_properties + i] as write
index while simultaneously incrementing `num_properties` inside the loop.
At iteration i, num_properties has also incremented by i, so the write
is done at `initial_num_properties + 2*i`, skipping every other index and
advancing by 2 per iteration.
With just 2 connector and 32 plane properties the last write happens at
index 64, one slot past the end of the 64-slot (indices 0–63)
allocation. A USB device can trigger OOB by advertising the maximum
number of properties.
Fix by dropping the redundant `+ i`; num_properties is already the correct
running index, as gud_connector_fill_properties() fills the preceding
slots.
-
CVE-2026-98161
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
nvdimm: pmem: keep PREFLUSH before data writes
pmem_submit_bio() records a REQ_PREFLUSH error, but continues to copy the
bio data and can later overwrite the error with a successful REQ_FUA flush.
That lets data writes run after a failed preflush and can complete the bio
successfully despite the failed ordering barrier.
Run the REQ_PREFLUSH flush synchronously before touching the bio data and
complete the bio with the flush error if it fails. Keep asynchronous flush
chaining for REQ_FUA. At that point, data copy has completed and the parent
bio can wait for the chained flush bio.
-
CVE-2026-98153
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
nvme: fix racy access to FDP placement id array
nvme_query_fdp_info() is called per-path and therefore prone to races.
It populates head-nr_plids/head->plids for fdp registration.
But nothing protects that pair from concurrent access - two paths scanning
the same namespace can race to populate it.
Avoid the race by moving this initialization work to nvme_alloc_ns_head()
which is called once per shared namespace.
-
CVE-2026-98152
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: fix queue leak when connect backlog is exceeded
When pending disconnecting queues exceed the backlog limit, the
connect path only drops the device reference and leaks the newly
allocated queue and its IB resources.
-
CVE-2026-98145
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: reject a command chain that carries no commands
A chain whose command_count is zero passes the payload length check,
because struct_size(payload, data, 0) is just the header. The fill loop
then does not run, so offset stays zero and the request is submitted with
a zero-length buffer.
On firmware without AIE2_NPU_COMMAND that ends at the opcode check, since
op is still ERT_INVALID_CMD and aie2_get_chain_msg_op() answers
MSG_OP_MAX_OPCODE. aie2_get_npu_chain_msg_op() answers
MSG_OP_CHAIN_EXEC_NPU whatever it is given, so there the submission
continues to drm_clflush_virt_range(cmd_buf, 0), which reads the byte
before the buffer and faults on the vmap guard page. EXEC_CMD is
reachable by any process that can open the render node.
Reject the request instead.
-
CVE-2026-98134
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: check_cond_jmp_op(): properly infer if register is null
Nicholas Carlini reported a bug when verifier can incorrectly infer
that a pointer is non-null. The bug occurs when two pointers are
compared and one of them has a type w/o PTR_MAYBE_NULL flag,
but which allows a value to be NULL at runtime.
Here is an example:
// `a` is PTR_TO_MEM | MEM_RDONLY | PTR_UNTRUSTED
// `a` is 0 at runtime.
// `b` is PTR_TO_MAP_VALUE | PTR_MAYBE_NULL
void *a = bpf_rdonly_cast(0, 0);
int *b = bpf_map_lookup_elem(...);
if (a == b)
*b = 42; // verifier does not catch null pointer dereference
This happens because of a special case in check_cond_jmp_op(),
which attempts to strip PTR_MAYBE_NULL flags from pointer types,
when processing comparisons like `rA == rB`, if either rA or rB can't
be null.
The non-null property is derived based on the absence of
PTR_MAYBE_NULL flag on rA's or rB's type. But that is not sufficient
for types like PTR_TO_MEM, as in the example.
This patch replaces type_may_be_null() call with reg_not_null(),
which contains an allowlist of types for which absence of
PTR_MAYBE_NULL actually means that the value can't be NULL at runtime.
At the moment, the list in the reg_not_null() omits two types for
which PTR_MAYBE_NULL is applicable: PTR_TO_XDP_SOCK and PTR_TO_BUF.
In order to remain backward compatible, and assuming that only
comparison between pointers of the same type makes sense,
this commit extends reg_not_null(). W/o such an extension e.g.
verifier_jeq_infer_not_null/null_ptr_to_map_value fails.
reg_not_null() can be extended further, but I deem that out of scope
for the fix at hand. Explicit base_type(...) != PTR_TO_BTF_ID
checks in the check_cond_jmp_op() can be removed with migration to
reg_not_null(), but that is a behavioural change, as the special case
would start matching for PTR_TO_BTF_ID that is also is_trusted_reg().
I omit the behavioural change from this commit.
-
CVE-2026-98133
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ntfs: leave HasEA flag untouched on setxattr failure
In ntfs_set_ea(), the exit path unconditionally updates the HasEA
flag based on ea_info_qsize. When an error occurs before
ea_info_qsize is updated, NInoClearHasEA() hides existing on-disk
EAs until the inode is evicted.
Only update the flag on success.
-
CVE-2026-98132
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: don't downgrade half-dead scalar zero spills to STACK_ZERO
states.c:__clean_func_state() can downgrade scalar zero spill to
STACK_ZERO in the following case:
*(u64 *)(r10 - 8) = 0;
... checkpoint ...
r1 = *(u32 *)(r10 - 4);
... no reads from r10-8 ...
Here 4 bytes at r10-8 are dead and verifier changes scalar spill to a
combination: 0000pppp (p stands for poison). Such a change breaks
precision propagation chains. All places that produce STACK_ZERO
should call bpf_mark_chain_precision() for the zero source.
This patch fixes the bug in a simplest way possible:
avoids converting stack spills of zero to STACK_ZERO.
Two smarter approaches are possible:
- do bpf_mark_chain_precision() from __clean_func_state()
- check slot liveness information in check_stack_write_fixed_off()
I investigated both and the changes required are a bit tricky,
hence go with a simple fix for the time being.
-
CVE-2026-98130
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
sctp: fix a TOCTOU race in SCTP_CMD_TIMER_START
The SCTP_CMD_TIMER_START handler checks timer_pending() before calling
timer_reduce(). The timer can expire and detach between these operations,
causing timer_reduce() to rearm the timer without taking the association
reference required for the newly armed timer.
The timer callback later unconditionally drops its association reference,
which can leave the association reference count unbalanced and result in
use-after-free during association teardown.
Use the return value of timer_reduce() to determine whether the timer was
actually armed. Take the association reference only when timer_reduce()
successfully starts a new timer, closing the race between checking the
timer state and rearming it.
This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero
Day Initiative.
-
CVE-2026-98127
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for insert range
smb3_insert_range() does not check if the new file size
(i_size + len) is valid. This allows FALLOC_FL_INSERT_RANGE to bypass
RLIMIT_FSIZE, exceed s_maxbytes, or produce a size outside the loff_t
range.
Use check_add_overflow() to calculate the new EOF. Validate it with
inode_newsize_ok() before modifying the file.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072 # RLIMIT_FSIZE = 3 MiB
# A regular write is stopped at 3 MiB.
dd if=/dev/zero of="$FILE" bs=1M count=4 status=none
stat -c "size after write: %s" "$FILE"
# Insert 2 MiB into a 2 MiB file.
truncate -s 2M "$FILE"
fallocate -i -o 0 -l 2M "$FILE"
stat -c "size after insert: %s" "$FILE"
'
Before this change, the regular write stops at the 3 MiB limit, but
insert range grows the file to 4 MiB:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
size after insert: 4194304
After this change, insert range also fails at the limit and leaves the
2 MiB file unchanged:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
fallocate: fallocate failed: File too large
size after insert: 2097152
-
CVE-2026-98126
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for zero range
When FALLOC_FL_ZERO_RANGE is used without FALLOC_FL_KEEP_SIZE,
smb3_zero_range() may extend EOF without checking RLIMIT_FSIZE, allowing
the file to grow beyond the caller's file-size limit.
Fix this by calling inode_newsize_ok() before sending the zero-range
request when the operation would extend EOF.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072
truncate -s 2M "$FILE"
fallocate --zero-range -o 0 -l 4M "$FILE"
echo "fallocate rc=$?"
stat -c "file size=%s" "$FILE"
'
Before this change, the operation succeeds despite the 3 MiB limit:
fallocate rc=0
file size=4194304
After this change, fallocate fails and leaves the file at 2 MiB.
-
CVE-2026-98119
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
netfs: break unbuffered write when netfs_alloc_subrequest() fails
syzbot reported a null-ptr-deref below [1] following a fault injection in
netfs_alloc_subrequest(). [0]
When netfs_alloc_subrequest() fails, subreq is NULL.
Later, netfs_prepare_write() tries to initialize members of
subreq(e.g., source), the issue in [1] is triggered.
Let's handle the error of netfs_prepare_write() properly.
[0]
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
Call Trace:
netfs_alloc_subrequest+0x116/0x3f0
netfs_prepare_write+0x76/0x7b0
netfs_unbuffered_write+0x75c/0x2020
netfs_unbuffered_write_iter_locked+0x7d6/0xa80
netfs_unbuffered_write_iter+0x442/0x720
v9fs_file_write_iter+0xbf/0x100
vfs_write+0x6ac/0x1050
[1]
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
RIP: 0010:netfs_prepare_write+0xbc/0x7b0 fs/netfs/write_issue.c:173
Call Trace:
netfs_unbuffered_write+0x75c/0x2020 fs/netfs/direct_write.c:111
netfs_unbuffered_write_iter_locked+0x7d6/0xa80 fs/netfs/direct_write.c:290
netfs_unbuffered_write_iter+0x442/0x720 fs/netfs/direct_write.c:382
v9fs_file_write_iter+0xbf/0x100 fs/9p/vfs_file.c:409
new_sync_write fs/read_write.c:595 [inline]
-
CVE-2026-98276
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: lock the socket in sock_gettstamp()
sk-sk_flags must only be changed while holding the socket lock,
because sock_set_flag() and sock_reset_flag() use non atomic
operations (__set_bit() and __clear_bit()).
sock_gettstamp() is one of the last places where a bit of sk->sk_flags
is changed from a syscall without owning the socket lock, through
sock_enable_timestamp(sk, SOCK_TIMESTAMP).
sk_set_memalloc() and sk_clear_memalloc() also change sk->sk_flags
without the socket lock, but their callers (nbd, iscsi_tcp, nvme-tcp,
sunrpc, wireguard) need a careful audit, this will be addressed in a
separate patch.
Jungwoo Lee and Wongi Lee reported an UDP socket use-after-free
caused by this bug: a SIOCGSTAMPNS_NEW ioctl racing with bind()
can cancel the SOCK_RCU_FREE bit that udp_lib_get_port() just set,
because both threads perform a read-modify-write on the same word.
CPU 0 (bind) CPU 1 (SIOCGSTAMPNS_NEW)
-------------------------------- ----------------------------
read sk_flags = F read sk_flags = F
compute F | BIT(SOCK_RCU_FREE) compute F | BIT(SOCK_TIMESTAMP)
store F | BIT(SOCK_RCU_FREE)
sk_add_node_rcu(sk, ...)
store F | BIT(SOCK_TIMESTAMP)
After the lost update, SOCK_RCU_FREE is clear while the socket is
visible to lockless UDP receive lookups. sk_destruct() then frees
the socket immediately instead of waiting for a RCU grace period,
while the receive path still holds a reference-less pointer to it:
BUG: KASAN: slab-use-after-free in ipv4_pktinfo_prepare+0x30/0x410
Read of size 8 at addr ffff888008806610 by task exploit/207
CPU: 0 UID: 1000 PID: 207 Comm: exploit Not tainted 6.12.95+ #1
ipv4_pktinfo_prepare+0x30/0x410
udp_queue_rcv_one_skb+0x51c/0x1180
udp_unicast_rcv_skb+0x109/0x350
ip_protocol_deliver_rcu+0x14b/0x310
ip_local_deliver_finish+0x29d/0x390
ip_local_deliver+0x24d/0x2a0
Only grab the socket lock when SOCK_TIMESTAMP has to be set,
to keep the common case lockless.
-
CVE-2026-98268
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
perf: Fix null pointer access in is_include_guest_event()
A typical module unload occurring event when there is an active perf
connection leads to freeing of the pmu pointer. The call log is something
like:
..
__pmu_detach_event
pmu_detach_event
pmu_detach_events
perf_pmu_unregister
..
__pmu_detach_event() sets event-pmu to null. When the perf connection
finally is closed, the following stack trace is observed:
Oops: general protection fault, kernel NULL pointer dereference
...
RIP: 0010:_free_event+0x3e/0x370
...
Call Trace:
...
perf_event_release_kernel+0x260/0x2d0
perf_release+0x12/0x20
A call to mediated_pmu_unaccount_event() inside _free_event() is the root
cause of this crash. Adding a check inside is_include_guest_event() ensures
we don't accidentally access a null pmu ptr. In addition to this, we will
now call mediated_pmu_unaccount_event() before clearing the pmu ptr so that
nr_include_guest_events counts are maintained correctly.
-
CVE-2026-98257
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
rds: ib: use rds_conn_drop() on protocol version mismatch
rds_ib_cm_connect_complete() runs from the RDMA-CM event handler with
conn-c_cm_lock held. When the peer negotiates a protocol version
older than RDS_PROTOCOL_COMPAT_VERSION, the handler calls
rds_conn_destroy(), which is only safe in the rmmod path: it
synchronously tears the connection down and flush_work()es the
shutdown work cp_down_w.
That shutdown work (rds_conn_shutdown()) needs cp_cm_lock, which is
the very lock the event handler still holds, so the flush never
completes: the two workers wait on each other and the RDS connection
workqueues stall for good.
All other RDMA-CM failure paths (REJECTED, CONNECT_ERROR,
DISCONNECTED) use rds_conn_drop(), which marks the connection
RDS_CONN_ERROR and schedules the shutdown work asynchronously. Use
it here as well.
-
CVE-2026-98242
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
dma-buf: Fix silent overflow for phys vec to sgt
In case MMIO size is bigger than 4G and peer2peer DMA goes
through host bridge, we trigger a code path that assigns the
total linked IOVA (which is greater than 4G) to mapped_len.
Previously, `mapped_len` was declared as 32-bit `unsigned int`.
When accumulating `size_t` lengths, this leads to a silent wrap-around.
This truncation causes truncated lengths to be passed to functions
like `fill_sg_entry()`.
Fix this by changing `mapped_len` to `size_t` (64-bit). While
at it, fix similar potential overflow issues in `calc_sg_nents`
by using `check_add_overflow()` for `nents` and using
`unsigned int` for the loop iterator in `fill_sg_entry` to match.
-
CVE-2026-98241
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
ipv6: xfrm: use full sockets in local error paths
xfrm6_local_rxpmtu() and xfrm6_local_error() dereference skb-sk as if it
always pointed at a full IPv6 socket.
That is not guaranteed. TCP SYN-ACK skbs can be owned by a
TCP_NEW_SYN_RECV request_sock while the output path itself is driven by the
full listener. If rerouting selects an IPv6 XFRM tunnel route with a lower
MTU, the local PMTU/error handling path can reach these callbacks with that
mini-socket still attached to the skb.
The callbacks then miscast the request socket as a full inet/IPv6 socket and
can read beyond the request_sock allocation when they access inet_sock or
ipv6_pinfo state.
Resolve the owner with skb_to_full_sk() in both callbacks and bail out when
no full socket is attached. This matches the surrounding XFRM IPv6 PMTU/error
logic, which already reasons about full sockets with skb_to_full_sk().
-
CVE-2026-98237
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: wwan: mhi_wwan_mbim: guard against a cyclic NDP chain
The NDP traversal in mhi_mbim_rx() only stops when wNextNdpIndex is
zero. Nothing requires the offsets to advance, so a modem that
points an NDP at itself, or at an earlier NDP, keeps the loop
spinning forever on one CPU.
Break out when the next NDP offset is not larger than the current
one.
Verified in a QEMU guest with a fault injector feeding the driver's
receive callback an NTB whose single NDP points at itself: the
unpatched driver spins in mhi_mbim_rx() with one CPU pinned at 100%
and the thread never returns. With this check the loop terminates
within one iteration.
Changes in v2: move the non-increasing check to the wNextNdpIndex
retrieval site, as suggested by Loic Poulain, instead of tracking
the previous offset in a separate variable.
-
CVE-2026-98229
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
xfrm: save input state data before secpath resets
xfrm_input() stores the current xfrm_state in the skb secpath while it
continues receive-side processing. Some input paths can reset that secpath
before xfrm_input() has finished dereferencing the state.
Receive callback users such as VTI and XFRM interfaces can reset the
secpath. The VTI receive path does so before checking whether the packet
crosses network namespaces, while the XFRM interface path does so only for
cross-network-namespace packets. The XFRM_MAX_DEPTH error path can also
reset the secpath before the final drop callback reports the current
state's protocol.
If secpath_reset() drops the last state reference while the state is
concurrently deleted, xfrm_input() can still dereference the freed state
when selecting transport_finish() or reporting the drop callback protocol.
Save the state protocol on the stack while the state is still valid,
and use the already saved address family for transport_finish(). A larval
XFRM_STATE_ACQ state has no type, so retain nexthdr as its protocol. This
preserves the existing drop-path fallback while avoiding the post-reset
state dereferences without adding an extra state reference to every
received packet.
-
CVE-2026-98227
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
memstick: ms_block: destroy io_queue workqueue on removal
msb_init_disk() creates the per-card ordered workqueue msb-io_queue with
alloc_ordered_workqueue(). It is torn down with destroy_workqueue() only
on the init error path; msb_remove() never destroys it. msb_stop() merely
flushes the queue, and neither msb_data_clear() nor put_disk() free it. As
a result every card insert/remove cycle leaks the workqueue and its
kworker, exhausting kernel memory over repeated cycles.
Destroy the workqueue in msb_remove() after the disk has been removed and
the queue drained.