-
CVE-2026-97981
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Count dropped frames as NAPI work
The RX loop only consumes budget when it successfully delivers a frame.
Error paths keep consuming descriptors without reducing the budget, so a
stream of bad frames can process the entire receive ring in one poll.
Move the budget accounting to a common end-of-frame path. This counts
each completed frame as NAPI work whether it was delivered or dropped,
matching the behavior of the vendor driver.
-
CVE-2026-97980
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
s390/debug: Fix NULL pointer dereference in debug_set_level()
Commit a2cec6863709 ("s390/debug: Add s390dbf kernel parameter")
incorrectly removed a null-id check from debug_set_level(), introducing
a possible NULL pointer dereference for debug-API users that put
debug_register() results unchecked into debug_set_level().
Fix this by moving the check from the internal _debug_set_level()
variant back to the external debug_set_level() wrapper.
-
CVE-2026-97975
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del()
A NULL pointer dereference in klist_put() occurs when a child device (such
as a BNEP network device in bnep_session) is concurrently being
unregistered while hci_conn_del_sysfs() reparents child devices.
This is caused by a race condition between hci_conn_del_sysfs() and
concurrent child device unregistration (e.g. bnep_session calling
unregister_netdev()). During device unregistration, device_del() snapshots
a non-NULL parent pointer. Concurrently, hci_conn_del_sysfs() finds the
child device using device_find_any_child() and calls device_move() to
reparent it to NULL, which removes the node from its parent's klist and
clears knode_parent. Subsequently, device_del() calls
klist_del(&dev-p->knode_parent) using the stale parent snapshot, causing
klist_put() to dereference knode_klist(n)->put on an already removed node,
resulting in a NULL pointer dereference.
This race was introduced by commit 27aabf27fd01 ("Bluetooth: fix
use-after-free in device_for_each_child()"), which replaced
device_find_child(..., __match_tty) with device_find_any_child() in
hci_conn_del_sysfs(). That change was intended to avoid a use-after-free
where conn->dev outlived its parent hdev->dev when child devices held
references to conn->dev, because conn->dev only held a reference to
hdev->dev while registered in sysfs.
Fix the issue properly by taking an explicit reference to the parent device
with get_device(&hdev->dev) in hci_conn_init_sysfs() and dropping it with
put_device(parent) in bt_link_release() when the conn device is freed. This
ensures that hdev->dev remains valid for the entire lifecycle of conn->dev,
resolving the underlying use-after-free. With the parent reference held
properly, restore the __match_tty filter in hci_conn_del_sysfs() so that
device_move() is only invoked on persistent RFCOMM TTY devices as
originally intended, eliminating the race condition with unregistering
network devices.
-
CVE-2026-98108
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix chan mode for LE_CONN_REQ + EXT_FLOWCTL pchan
l2cap_new_connection() sets default value of channel mode to match the
parent channel. l2cap_le_connect_req() left this at the default, and
created L2CAP_MODE_EXT_FLOWCTL channels if listening pchan has that
mode. This causes FLAG_DEFER_SETUP channels to reply to
L2CAP_LE_CONN_REQ with L2CAP_ECRED_CONN_RSP, which is incorrect.
It can also result to stack OOB write (of l2cap_alloc_cid determined
values) in l2cap_ecred_rsp_defer(), as l2cap_le_connect_req() does not
limit maximum number of deferred channels or check for duplicate ident.
Fix by setting chan-mode correctly in l2cap_le_connect_req().
Also check channel mode in l2cap_ecred_rsp_defer(), and do WARN_ON_ONCE
instead of OOB write to make it less brittle.
-
CVE-2026-98107
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix out-of-bounds write in l2cap_ecred_connect
l2cap_chan_connect() tries to ensure there are no more than
L2CAP_ECRED_CONN_SCID_MAX pending ECRED channels, so they fit in the
same L2CAP_ECRED_CONN_REQ that l2cap_ecred_connect() constructs.
However, the check only counts deferred channels. If 6 L2CAP sockets
are connected at the same time in order DDDDND (D=deferred,
N=non-deferred), the last can bump the total to max+1. It results to
one __le16 written out of bounds of the scid array, and an invalid
ECRED_CONN_REQ being sent.
Fix by leaving room for the non-deferred pending ECRED channels in the
counting in l2cap_chan_connect(), so the limit can't be exceeded.
Move counting under same critical section where the channel is added.
Although race conditions involving this appear unreachable, it's easier
to see.
Also add WARN_ON_ONCE check in l2cap_ecred_defer_connect() to make this
less brittle.
-
CVE-2026-98104
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: fix duplicate handle when node ID pool is exhausted
gen_new_kid() falls back to returning max (htid | 0xFFF) when both
idr_alloc_u32() ranges are full, instead of reporting an error.
u32_change() trusts that value and inserts a new knode with a handle
that is already live in the hash table, breaking handle uniqueness
within the table's node ID space.
The handle was never reserved in ht-handle_idr, so every later error
path that does idr_remove(&ht->handle_idr, handle) removes the
reservation of a different, live knode, which is then reused — one
failed add compounds into further duplicates.
The 4095 limit is per (table, bucket) — ht->handle_idr is per hash
table and the range is derived from htid (bucketid), so a table with
divisor 256 can legitimately hold 256*4095 knodes.
The sibling helper gen_new_htid() has the same silent in-band failure:
it returns 0 when the tp_c handle pool (1..0x7FF) is full, and
u32_init() publishes the root hash table with handle 0 without
checking. Two root tables with handle 0 alias in u32_lookup_ht(),
allowing cross-tcf_proto knode add/lookup/delete. Add the same
exhaustion check that the divisor path already has.
Return an error so u32_change() fails with ENOSPC/ENOMEM when the
node ID space is exhausted, and so u32_init() fails with -ENOMEM
when the hash table ID space is exhausted. The extack message
distinguishes pool exhaustion (-ENOSPC) from a transient allocation
failure (-ENOMEM).
Conditions to recreate the bug:
- CONFIG_NET_SCHED=y, CONFIG_CLS_U32=y (or =m with module loaded)
- Create a clsact qdisc on a device, then add 4095 u32 filters with
auto-generated handles to fill the node ID space for the root hash
table (single bucket). The 4096th auto-handle filter add triggers
the duplicate handle (fh 800::fff reused). Reachable at Level 2
(unshare -Urn, namespace-local CAP_NET_ADMIN).
- For gen_new_htid: create 2047 u32 proto entries on the same block
to fill the tp_c handle pool, then create one more. The root table
gets handle 0 and aliases with other handle-0 root tables.
-
CVE-2026-98103
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
igmp: convert struct ip_sf_list to RCU
Commit 23d2b94043ca ("igmp: Add ip_mc_list lock in ip_check_mc_rcu")
added spin_lock_bh(&im-lock) to ip_check_mc_rcu() to prevent a
use-after-free while iterating im->sources during concurrent deletions.
However, ip_check_mc_rcu() is called from RCU read-side critical
sections in packet receive and route lookup fast paths (e.g.
__mkroute_output(), ip_route_input_rcu(), and __udp4_lib_rcv()).
When igmpv3_send_cr() or igmpv3_send_report() holds &pmc->lock and
calls add_grec() -> igmpv3_newpack() -> ip_route_output_ports(),
an XFRM policy matching a multicast destination triggers
xfrm_tmpl_resolve_one() -> xfrm4_get_saddr() -> __mkroute_output() ->
ip_check_mc_rcu(). This attempts to acquire &im->lock while &pmc->lock
is already held on the same CPU, triggering a lockdep recursive locking
warning / deadlock.
Fix this by converting IPv4 struct ip_sf_list to RCU, mirroring the
IPv6 implementation in net/ipv6/mcast.c:
1. Add struct rcu_head to struct ip_sf_list and annotate sf_next,
sources, and tomb as __rcu pointers.
2. Use rcu_assign_pointer() and kfree_rcu() for list updates and
deletions.
3. Remove spin_lock_bh(&im->lock) from ip_check_mc_rcu() and traverse
im->sources locklessly with for_each_psf_rcu(), reading and writing
counter fields with READ_ONCE() and WRITE_ONCE().
Note: RCU conversion of /proc/net/mcfilter will be done in a
separate patch.
-
CVE-2026-98097
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
tipc: Dont send random pad bytes in RESET/ACTIVATE messages
The interface name is passed in a fixed length (TIPC_MAX_IF_NAME) buffer.
Replace the strcpy(data, l-if_name) with memcpy() so that the
pad bytes are actually written (l->if_name[] is zero padded)
rather than sending random bytes from the skb to the remote system.
Replace two other strcpy() with strscpy().
-
CVE-2026-98092
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: yc: fix memory leak in acp6x_pdm_dma_close()
acp6x_pdm_dma_close() does not free the runtime-private_data buffer
allocated in acp6x_pdm_dma_open(). Add the missing kfree.
-
CVE-2026-98091
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
btrfs: detach failed sprout device from transaction update list
When creating the first metadata chunk for a sprout filesystem,
create_chunk() adds the new device to the transaction dev_update_list
through device-post_commit_list.
If the subsequent system chunk creation fails, btrfs_init_new_device()
aborts the transaction and releases the device while post_commit_list is
still linked. This triggers a warning in btrfs_free_device() and leaves
the transaction list referencing freed memory.
Detach the device while holding chunk_mutex before releasing it.
-
CVE-2026-98085
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: backtrack_insn(): Handle ld_{abs,ind} subprog exit edge
Nicholas Carlini reported a bug in precision backtracking mechanism
for BPF_LD | BPF_{IND,ABS} instructions. These instructions are
modelled as two branches:
- fallthrough;
- implicit exit from current subprogram.
The implicit exit case was not handled by the backtrack_insn()
function. When backtracking such a path backtrack_insn() did not
call bt_subprog_enter(), which meant that backtracking continued
manipulating precision marks in a caller frame, while looking at
instructions in a callee frame.
This lead to segmentation faults during verification (see the
selftest), or unsound state pruning.
-
CVE-2026-98083
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix transaction use-after-free in raid stripe insertion
If allocation of a RAID stripe extent fails,
btrfs_insert_one_raid_extent() aborts and ends the transaction before
returning -ENOMEM.
btrfs_finish_one_ordered(), the production caller through
btrfs_insert_raid_extent(), still owns the transaction handle. It handles
the error by aborting the transaction and then reaches the common exit
path, which ends the transaction again.
The premature end can free the handle and drop its transaction reference.
Transaction cleanup can then free the transaction before the caller's
second abort accesses the handle and transaction, resulting in
use-after-free.
Keep the abort at the failure site, but let the caller's common exit path
end the transaction once, after it has finished using both objects.
-
CVE-2026-98080
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not force reloc root creation during qgroup_account_snapshot()
[BUG]
When running btrfs/252 with quota enabled through MKFS_OPTIONS="-O quota",
it has a high chance to trigger the following kernel warning and flips
the fs RO:
BTRFS info (device dm-2): relocating block group 30408704 flags metadata|dup
------------[ cut here ]------------
WARNING: fs/btrfs/extent-tree.c:879 at lookup_inline_extent_backref+0x74b/0x960 [btrfs], CPU#4: btrfs/2173
CPU: 4 UID: 0 PID: 2173 Comm: btrfs Not tainted 7.2.0-rc6-custom+ #457 PREEMPT(full) 3adc6528fb66f7a55fe1095385818e742f200aab
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:lookup_inline_extent_backref+0x74b/0x960 [btrfs]
Call Trace:
TASK
insert_inline_extent_backref+0x7c/0x160 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
__btrfs_inc_extent_ref+0xa9/0x270 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
__btrfs_run_delayed_refs+0x4af/0x11c0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
btrfs_run_delayed_refs+0x9d/0xf0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
create_pending_snapshot+0x39d/0xf00 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
create_pending_snapshots+0x9b/0xc0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
btrfs_commit_transaction+0x280/0xeb0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
prepare_to_relocate+0x147/0x200 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
relocate_block_group+0x6b/0x5e0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
btrfs_relocate_block_group+0x92c/0x2380 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
btrfs_relocate_chunk+0x3f/0x1a0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
btrfs_balance+0xa2c/0x19c0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
btrfs_ioctl+0x2839/0x2d30 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72]
__x64_sys_ioctl+0x416/0x9a0
do_syscall_64+0xe1/0x790
entry_SYSCALL_64_after_hwframe+0x4b/0x53
---[ end trace 0000000000000000 ]---
BTRFS info (device dm-2): leaf 4593991680 gen 233 total ptrs 175 free space 5953 owner 2
BTRFS info (device dm-2): refs 3 lock_owner 2173 current 2173
item 0 key (166772736 METADATA_ITEM 1) itemoff 16250 itemsize 33
extent refs 1 gen 222 flags 2
ref#0: tree block backref root 266
[ Skip the tree dump ]
item 174 key (263225344 METADATA_ITEM 0) itemoff 10328 itemsize 33
extent refs 1 gen 162 flags 258
ref#0: tree block backref root 267
BTRFS error (device dm-2): extent item not found for insert, bytenr 179847168 num_bytes 16384 parent 4594335744 root_objectid 273 owner 0 offset 0
BTRFS error (device dm-2): failed to run delayed ref for logical 179847168 num_bytes 16384 type 182 action 1 ref_mod 1: -117
[CAUSE]
The above error is showing that there is a tree reference to a metadata
extent that is no longer there.
With "ref_verify" mount option (requires CONFIG_BTRFS_DEBUG), there is
some extra debug output:
BTRFS error (device dm-2): dumping block entry [180961280 16384], num_refs 0, metadata 1, from disk 0
BTRFS error (device dm-2): root entry 256, num_refs 18446744073709551615
BTRFS error (device dm-2): root entry 273, num_refs 18446744073709551615
BTRFS error (device dm-2): Ref action 3, root 273, ref_root 273, parent 0, owner 0, offset 0, num_refs 1
btrfs_force_cow_block+0x129/0x7d0 [btrfs]
btrfs_cow_block+0x10a/0x250 [btrfs]
btrfs_search_slot+0x5eb/0xf40 [btrfs]
btrfs_insert_empty_items+0x3a/0x70 [btrfs]
insert_with_overflow+0x53/0x130 [btrfs]
btrfs_insert_dir_item+0x125/0x290 [btrfs]
btrfs_add_link+0xaa/0x410 [btrfs]
btrfs_rename+0x5ea/0xcd0 [btrfs]
btrfs_rename2+0x28/0x60 [btrfs]
vfs_rename+0x5b2/0xe10
filename_renameat2+0x244/0x430
__x64_sys_rename+0x48/0x70
do_syscall_64+0xe1/0x790
entry_SYSCALL_64_after_hwframe+0x4b/0x53
---truncated---
-
CVE-2026-98077
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: fix OOB read in sip_skip_whitespace()
sip_skip_whitespace() returns dptr unchanged when its own loop
exhausts the buffer (dptr == limit), instead of NULL like its sibling
sip_follow_continuation() returns on its own "no more data" path.
ct_sip_get_header() only checks for NULL after calling it:
dptr = sip_skip_whitespace(dptr, limit);
if (dptr == NULL)
break;
if (*dptr != ':' || ++dptr = limit)
break;
so a recognized header name followed only by spaces/tabs running to
the exact end of the SIP payload, with no colon, makes the very next
statement read one byte past the buffer.
Make both "no more data" outcomes return NULL, matching the
convention sip_follow_continuation() already uses and that both
existing callers already check for.
-
CVE-2026-98076
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing/probes: Fix use-after-free on field name/type of events with multiple probes
The fields of a probe-based dynamic event (kprobe, uprobe, eprobe and
fprobe events) are created in traceprobe_define_arg_fields() by handing
the probe_arg name/type strings to trace_define_field(), which only
stores the pointers without copying. Those strings are owned by the
trace_probe and are freed when that probe is removed.
An event can have several probes attached. The field list is defined
only once, by the first probe that registers the event, but it is kept
alive by any surviving sibling probe. Deleting just that first probe by
symbol -
# primary A: fields are defined from A's args
echo 'p:kprobes/ev vfs_read a1=$arg1' kprobe_events
# append B: shares A's event call
echo 'p:kprobes/ev vfs_write a1=$arg1' >> kprobe_events
# delete only A (matched by symbol), B survives
echo '-:kprobes/ev vfs_read' >> kprobe_events
frees A's args (trace_probe_cleanup() -> traceprobe_free_probe_arg()),
but trace_probe_unlink() keeps the trace_probe_event because the probe
list is not empty. The event call stays registered via B while its
fields now reference freed memory. Any field lookup then reads it, e.g.
echo 'a1 == 1' > events/kprobes/ev/filter
BUG: KASAN: slab-use-after-free in strcmp+0xa7/0xb0
Call Trace:
strcmp
trace_find_event_field
parse_pred
process_preds
create_filter
apply_event_filter
event_filter_write
field->name references parg->name (kstrdup'd, freed with the probe) and,
for array arguments, field->type references parg->fmt (kmalloc'd, freed
with the probe) - the scalar type otherwise points at the static
fmttype rodata, which is safe.
Have traceprobe_define_arg_fields() duplicate the name and type strings
and anchor the copies on the trace_probe_event, which embeds the event
call and outlives every individual probe; trace_probe_event_free()
releases them.
The reproducer above triggers reliably; the field lookup and the delete
both run under event_mutex, so this is a dangling reference after
removal rather than a race.
The issue was found by the autokbug dynamic kernel fuzzer at Tencent
Yunding Lab.
-
CVE-2026-98067
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
erofs: disable LZ4 rolling decompression for now
LZ4 rolling decompression [1] was introduced to reduce the memory
footprint of temporary pages:
For many cases, it is needed for users to read small data within
a compressed extent (pcluster), either due to random small read, or
since uptodate folios (typically order-0) cannot be reused for
decompression again since decompression algorithm refills
already-uptodate folios.
Rolling decompression works because LZ4 is LZ77-based and only refers
to the most recent 64 KiB of decompressed data, so in theory only a
bounded rolling window of temporary pages is needed when decompressing.
It can save a lot of temporary memory, e.g.
601,960-byte data can be compressed into a 256k LZ4 compressed extent,
which means it needs 146 extra pages per request in the worst case if
rolling decompression is disabled.
However, the upstream LZ4 implementation is not under EROFS' control:
For example, the literal copy memmove() may still **copy long literals
backward** on x86 based on the address comparison even when the source
and destination ranges do not overlap (IOWs, inline decompression
doesn't need to be considered here). That breaks the rolling assumption
and makes the optimization broken.
Disable it for now to make sure the data correctness first since EROFS
is used everywhere now: The rolling window approach can be revived once
we either ensure that the official LZ4 code always copies forward for
non-overlapping ranges or maintain our own LZ4 implementation in EROFS.
The main impact is a higher runtime memory footprint; However, recent
commit 0f6273ab4637 ("erofs: add a reserved buffer pool for lz4
decompression") helps mitigate this when enabled but it's still not
perfect.
[1] https://www.usenix.org/conference/atc19/presentation/gao
§ 3.3 Decompression
-
CVE-2026-98064
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL-ptr-deref when showing a void BTF type
btf_modifier_show() resolves the modifier and then calls
btf_type_ops(t)-show() unconditionally. For the void type (type_id 0,
BTF_KIND_UNKN) kind_ops[] has no entry, so ->show is NULL.
A "const void" (a modifier resolving to void) cannot be a map key or
value - map_check_btf() rejects it because void has no size - so the map
dump path does not reach it. But bpf_snprintf_btf() takes a type_id
straight from the BPF program, and passing such a "const void" from the
vmlinux BTF NULL-derefs:
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
RIP: 0010:btf_modifier_show (kernel/bpf/btf.c:2914)
Call Trace:
TASK>
btf_type_show (kernel/bpf/btf.c:8251)
btf_type_snprintf_show (kernel/bpf/btf.c:8321)
bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047)
bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829)
__sys_bpf (kernel/bpf/syscall.c:4804)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Fall back to btf_df_show() when the resolved type has no show op; it
emits the "" placeholder already used for kinds like
FWD and FUNC. bpf_snprintf_btf() then returns the length as usual.
-
CVE-2026-98062
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark signal tracepoint siginfo arguments as scalar
The signal_generate and signal_deliver tracepoints declare their info
argument as a struct kernel_siginfo pointer. btf_ctx_access() therefore
treats it as a trusted pointer for tp_btf programs.
Signal delivery also uses SEND_SIG_NOINFO and SEND_SIG_PRIV as special
values for this argument. Those values are zero and one respectively,
and are not pointers. A tp_btf program can currently dereference either
value and fault the kernel. In particular, signal_generate can run from
timer interrupt context, turning the fault into a kernel panic.
Record both tracepoints in raw_tp_null_args[] and mark argument one as
a non-pointer. This preserves scalar access to the cookie while rejecting
direct and helper-mediated pointer use. Merely marking it nullable would
not suffice because SEND_SIG_PRIV is nonzero.
-
CVE-2026-98055
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Clean up the bus when fetching ML caps fails
snd_hdac_ext_bus_get_ml_capabilities() may fail and its return code
shall be checked and accounted for. Address the issue by updating the
error-path for avs_pci_probe().
At the same time, if the function in question succeeds but the next part
of avs_pci_probe() fails, the hlink list shall be cleaned up before
leaving the scope.
-
CVE-2026-98054
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Fix unbalanced module reference count
strace_open() invokes try_module_get() which on success takes
the module reference. If any follow up operation causes
strace_open() to fail, the refcount shall be put down.