-
CVE-2026-98045
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark faultable stack helpers as sleepable
The faultable variants of bpf_get_stack() and bpf_get_task_stack() pass
may_fault=true into the common stack collection code. Resolving user-space
build IDs may then call build_id_parse_file() and block on filesystem
reads.
Neither helper prototype sets might_sleep. Since prototype selection uses
the sleepability of the whole program, the verifier can still allow these
helpers from a non-sleepable region within that program, such as an
explicit RCU or preemption-disabled region. The task-stack helper can also
be called from a non-sleepable timer callback of a sleepable program.
Mark both faultable prototypes as sleepable. The existing helper context
check then rejects these calls while continuing to allow them in genuinely
sleepable contexts.
-
CVE-2026-98044
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject legacy packet loads from callbacks
check_ld_abs() models a failed BPF_LD_ABS or BPF_LD_IND in a
subprogram as an implicit return with R0 set to zero. It calls
prepare_func_exit() to explore this synthesized path.
When the load is reached directly from a synchronous callback,
prepare_func_exit() enforces the callback return contract and marks R0
precise. R0 is not derived from a real instruction on this path, so
precision backtracking reaches the callback call with R0 still requested
and triggers the "callback unexpected regs" verifier bug. A privileged
program loader can therefore cause a verifier warning and an -EFAULT
BPF_PROG_LOAD.
These legacy packet-load instructions are deprecated. Reject them from
callbacks rather than complicating their implicit-return model. Check all
active frames before constructing the implicit return so nested static
subprograms cannot hide the callback context.
Global functions are verified independently with a fresh frame zero, so
an active-frame check cannot identify a global function called from a
callback. Also check the complete subprogram call graph during stack-depth
validation and reject a function containing a legacy load when any caller
is a callback. This covers global and static descendants without making
has_ld_abs transitive, preserving its per-function BTF return-type check.
Ordinary uses outside callbacks remain supported.
-
CVE-2026-98043
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Don't infer non-NULL from a pointer with an unbounded offset
reg_not_null() decides that a register holds a non-NULL value by
looking at its type alone. For pointer types that allow arithmetic the
type only guarantees a non-NULL base, in case of an unbound offset
the runtime offset value might still add up to NULL.
Consider the followng program:
r6 = bpf_map_lookup_elem(map, &0); /* present */
if (r6 == 0) return 0;
r7 = bpf_map_lookup_elem(map, &1); /* absent, NULL at runtime */
r8 = r7;
r8 -= r6; /* pointer - pointer: unknown scalar, -r6 */
r8 <= 1;
r8 >= 1; /* any non-negative offset is accepted by */
/* check_reg_sane_offset_ptr() */
r6 += r8; /* verifier: map value; runtime: zero */
if (r7 != r6) return 0;
*(u8 *)(r7 + 0); /* r7 is inferred non-NULL, both are zero */
At runtime both registers are zero, the comparison is true and the
load faults with NULL pointer dereference.
Require the offset to be within +-BPF_MAX_VAR_OFF in reg_not_null().
-
CVE-2026-98031
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
nexthop: Initialize extack in remove_nh_grp_entry()
remove_nh_grp_entry() prints the extack message when a listener fails
to replace the reduced nexthop group. However, extack is not
initialized and listeners are not required to set a message when
returning an error. Neither netdevsim nor mlxsw do so when an
allocation fails, resulting in the dereference of an uninitialized
stack pointer.
Fix by zero-initializing extack, as was done in commit 6347c5314cee
("nexthop: initialize extack in nh_res_bucket_migrate()").
-
CVE-2026-98028
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
eth: nfp: drop the replaced rule from the list when reprogramming fails
nfp_net_fs_add() replaces an existing rule by deleting it from the
hardware, decrementing nn-fs.count and programming the new one. If
nfp_net_fs_add_hw() fails the old entry stays on nn->fs.list - only the
success path reaches list_replace() - so the list is one longer than
nn->fs.count, and it advertises a rule whose hardware entry has already
been torn down.
nn->fs.count is what ETHTOOL_GRXCLSRLCNT reports, so userspace then sizes
its buffer one entry short of what the GRXCLSRLALL walk wants to write.
That used to overwrite one u32 past the allocation; since the walk is
bounded it is a permanent -EMSGSIZE instead, as nothing ever resyncs the
counter.
-
CVE-2026-98019
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: mark a NULL call argument precise
check_func_arg() allows bpf_register_is_null() for nullable arguments
w/o marking the underlying scalar register precise. Hence a checkpoint
created on such a path would prune against arbitrary scalar value.
check_helper_call() enforces second parameter of the
bpf_get_local_storage() to be zero, w/o marking the underlying scalar
register precise. Hence a checkpoint created on such a path would
prune against arbitrary scalar value.
Grouping these two into one patch, as they share the same fixes tag.
-
CVE-2026-98017
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/sched: defer qdisc freeing after failed creation
An RTM_NEWQDISC request can make clsact bind a populated shared ingress
block during -init(), publishing an embedded mini_Qdisc to lockless
readers. If the same request has an invalid TCA_RATE, estimator setup
fails after ->init(); the unwind removes the pointer but synchronously
frees its containing qdisc while tc_run() may still hold it.
Retire failed qdiscs through the same RCU helper as normal destruction.
Inline the synchronous free into the callback now that no direct callers
remain.
-
CVE-2026-98016
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix use-after-free race in sample_restore_put()
Concurrent teardown of TC sample rules sharing the same restore
context may re-read restore-count after dropping restore_lock.
At that point another thread may already have completed cleanup and
freed the restore object.
Use the result of the refcount decrement while holding restore_lock to
determine whether cleanup is needed.
-
CVE-2026-98014
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: E-Switch, prevent mc_list repopulation during vport disable
In mlx5_esw_vport_disable(), move esw_apply_vport_rx_mode() ahead
of esw_vport_change_handle_locked() so vport-allmulti_rule is
NULL before the change handler observes it.
During FW-fatal recovery the disable runs while dev->state ==
INTERNAL_ERROR. The promisc query inside esw_update_vport_rx_mode()
fails and returns early, leaving vport->allmulti_rule intact, so
esw_update_vport_mc_promisc() runs and adds MLX5_ACTION_ADD entries
to vport->mc_list whose flow rules are then installed in the FDB
by esw_add_mc_addr(). esw_destroy_legacy_table() tears down the
FDB with those refs still held, corrupting the sub-tree and
leaving dangling flow_rule pointers in vport->mc_list.
Two-stage failure on `echo 1 > /sys/bus/pci/devices/bdf>/reset`:
refcount_t: underflow; use-after-free.
tree_put_node+0xef/0x110 [mlx5_core]
clean_tree+0x44/0xd0 [mlx5_core] (x5)
mlx5_fs_core_cleanup+0x57/0x1c0 [mlx5_core]
mlx5_unload+0x65/0xd0 [mlx5_core]
... mlx5_health_try_recover
BUG: unable to handle page fault for address: 0000000003000055
down_write+0x1c/0x60
mlx5_del_flow_rules+0x33/0x1f0 [mlx5_core]
esw_del_mc_addr+0x7b/0x170 [mlx5_core]
esw_apply_vport_addr_list+0x56/0xf0 [mlx5_core]
esw_vport_change_handle_locked+0x28b/0x310 [mlx5_core]
mlx5_esw_vport_enable+0x270/0x4a0 [mlx5_core]
... mlx5_load ... mlx5_health_try_recover
esw_apply_vport_rx_mode(false, false) clears vport->allmulti_rule
via its local state machine even when the FW del fails. With the
rule NULL the !IS_ERR_OR_NULL(allmulti_rule) gate in the change
handler closes, no rules are installed during disable, and the
reload starts with a clean mc_list.
-
CVE-2026-98004
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
iommu/riscv: Serialize command queue publishing
Serialize command queue publishing so software producer state advances only
after a command is written and the hardware tail is updated. Wait for
hardware consumption outside the queue lock when the command queue is full
so other CPUs are not blocked behind a long poll.
-
CVE-2026-97997
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
virtio_ring: fix stale descriptor flags after a failed packed add
In a packed ring the AVAIL and USED bits sit in the descriptor itself,
so writing them makes that descriptor available. Those bit combinations
flip meaning on every round of the ring, tracked by a wrap counter, so
invalidating or validating a descriptor means inverting both bits.
Commit 1ce9e6055fa0 ("virtio_ring: introduce packed ring support") has
virtqueue_add_packed() make every descriptor of a chain available as it
maps the chain, and write the head last. The device consumes the ring in
order and stops at a head that is not available yet, so it never reaches
the rest.
When vring_map_one_sg() fails partway, unmap_release unmaps the segments
and restores avail_used_flags, but the descriptors it wrote to in the
ring stay marked with AVAIL and USED bits. The head is now the only
entry that keeps the device from consuming these stale entries.
For example, the ring would look like this now.
Z - pre-previous command
A - previous command
B - aborted command
C - current command
[A1 DONE] [A2 DONE] C1 EMPTY [B2] [B3] [Z1 DONE]
When the driver now attempts to issue the C command, the next add starts
at the same head as B. If C spans less descriptors than B, there is no
end marker because AVAIL and USED bits were still in place. And that
means the device will start interpreting these stale entries (B2/B3) as
another command entry, which then blocks the queue.
This effect typically happens in swiotlb configurations under memory
pressure, because vring_map_one_sg() can then fail with larger I/O
requests which then leads to command abortions.
There are broadly 2 ways to avoid leaving those flags behind:
1) Defer those flags too until the chain is complete.
2) Rewrite those flags for the previous wrap counter.
Implement the second option in both packed add paths. The first option
traverses the chain a second time on every successful add. The second
option invalidates all added descriptors when any add fails.
With this patch applied, a packed virtqueue keeps completing requests
after a failed add.
-
CVE-2026-97996
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
virtio: fix use-after-free in unregister_virtio_device()
device_unregister() is device_del() plus put_device(). When the caller
holds no extra reference, that drops the last one and runs the release
callback, which for several transports frees the memory the embedded
struct virtio_device sits in. unregister_virtio_device() then calls
virtio_debug_device_exit(), which reads dev-debugfs_dir out of the freed
object.
Affected transports are the ones whose release callback frees and whose
remove path takes no reference: virtio_mmio, virtio_vdpa, virtio_uml,
mlxbf-tmfifo and virtio_ccw. virtio_pci is unaffected because
virtio_pci_remove() brackets the call with get_device() and put_device().
Remove the debugfs entries before the device can go away. They are only
accessed through the protected debugfs interface, so
debugfs_remove_recursive() waits for in-progress file operations before
returning. Tearing them down while the device is still alive is therefore
safe.
Reproduced on User-Mode Linux with CONFIG_KASAN and CONFIG_VIRTIO_DEBUG
by unbinding a virtio-uml device:
BUG: KASAN: slab-use-after-free in virtio_debug_device_exit+0x36/0x4d
Read of size 8 at addr 00000000616e0b10 by task init/1
__asan_report_load8_noabort
virtio_debug_device_exit+0x36/0x4d
unregister_virtio_device+0x48/0x75
virtio_uml_remove
platform_remove
device_release_driver_internal
unbind_store
Freed by task 1:
kfree
virtio_uml_release_dev
device_release
kobject_put
put_device
device_unregister
With this applied, the report is gone and unbind is clean.
-
CVE-2026-97994
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
vhost/vdpa: reject VRING_NUM larger than device max
vhost_vring_set_num() accepts any non-zero power-of-two queue size that
fits in 16 bits. vhost-vdpa then passes that value to set_vq_num()
without comparing it with get_vq_num_max().
A process with access to /dev/vhost-vdpa-* can therefore configure a
queue larger than the device advertises. With vdpa_sim, the worker can
walk descriptors beyond the mapped descriptor ring. KASAN reports a
16-byte out-of-bounds read, corresponding to one vring_desc, in the
vringh IOTLB path:
BUG: KASAN: out-of-bounds in _copy_from_iter
Read of size 16
copy_from_iotlb
copydesc_iotlb
vringh_getdesc_iotlb
vdpasim_net_work
Cache get_vq_num_max() immediately after reset. Some backends derive
it from writable queue-size state, so querying it after SET_NUM may
return the current size instead of the device capability. Invalidate
the cached value before reset so a failed reset leaves SET_NUM
disabled.
For VHOST_SET_VRING_NUM, copy the complete vring state once and use
the same index and size for validation, vq-num, and set_vq_num().
This ensures that validation and use operate on the same copied values.
-
CVE-2026-97991
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim_blk: reject out-of-range sector starts
vdpasim_blk_check_range() logs an invalid start sector but continues
validating the request. The subsequent unsigned capacity subtraction can
underflow and let an out-of-range buffer offset reach the data path.
The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT
copies guest data to blk-buffer + offset through
vringh_iov_pull_iotlb(), causing an out-of-bounds write in
_copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from
blk->buffer + offset to the guest through vringh_iov_push_iotlb(),
causing an out-of-bounds read in _copy_to_iter().
VIRTIO_BLK_T_WRITE_ZEROES passes blk->buffer + offset to memset(),
causing an out-of-bounds write.
Reject starts at or beyond the capacity before the subtraction. Treat the
capacity boundary as invalid because the IN and OUT paths round byte counts
down to sectors for validation but later copy the original byte counts. A
sub-sector request at the capacity boundary would otherwise still access
past the end of the buffer.
I found this bug myself, though the patch was written with AI assistance.
-
CVE-2026-97986
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
virtio_input: stop callbacks before unregistering input device
virtinput_remove() unregisters the input device before resetting the
virtio device. virtinput_recv_events() drops vi-lock around input_event(),
so clearing vi->ready does not stop a callback that passed the entry check.
It can still use vi->idev, requeue buffers and kick the queue.
Reset first, as virtinput_freeze() already does. With the preceding core
change, reset waits for callbacks before input_unregister_device() can
free vi->idev. Recheck vi->ready after taking the lock again: keep draining
completed events so an input packet is not truncated, but stop requeueing
buffers and kicking the queue.
With evdev attached, input_unregister_handle() currently waits for an RCU
grace period, which also waits out IRQ callbacks. This masks the lifetime
bug on PCI and MMIO, but does not protect sleepable callbacks on other
transports.
-
CVE-2026-97983
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
vduse: return compat ioctl results directly
The compat handler handles VDUSE_IOTLB_GET_FD and VDUSE_VQ_GET_INFO, but
then calls the native handler. Their different command sizes make native
dispatch return -ENOIOCTLCMD.
For GET_FD, this overwrites receive_fd()'s return value after the
descriptor is installed, leaking one fd per call. Return handled compat
results directly and use native dispatch only for other commands.
-
CVE-2026-97982
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Fix budget accounting
The gmac_rx() function returns the remaining NAPI budget, but its
caller treats the return value as the number of packets received. An
idle poll therefore reports a full budget and remains scheduled.
Return the number of received packets instead. Preserve the existing
free queue refill accounting by adding that count directly; continuing
to subtract it from the budget would invert the refill behavior.
-
CVE-2026-97976
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: validate packet_len before skb_put_data
btintel_pcie_submit_rx_work() reads packet_len from rfh_hdr without
checking if it exceeds the RX buffer size. An oversized packet_len
can lead to an out-of-bounds read in skb_put_data().
Validate packet_len to ensure it is non-zero and does not exceed
BTINTEL_PCIE_BUFFER_SIZE - sizeof(*rfh_hdr), logging an error when
invalid.
This issue was reported by Claude Mythos. It can be simulated either by
using customized firmware configured to return an invalid packet_len or
by modifying rfh_hdr-packet_len in the driver before calling
btintel_pcie_submit_rx_work().
-
CVE-2026-97965
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
vxlan: initialize _md in vxlan_xmit_one()
If a VXLAN device is configured with both VXLAN_F_COLLECT_METADATA and
VXLAN_F_GBP, and a packet is transmitted through it using an external
ip_tunnel_info that lacks the IP_TUNNEL_VXLAN_OPT_BIT flag, md is left
pointing to the uninitialized _md stack variable:
if (test_bit(IP_TUNNEL_VXLAN_OPT_BIT, info-key.tun_flags)) {
if (info->options_len sizeof(*md))
goto drop;
md = ip_tunnel_info_opts(info);
}
Because IP_TUNNEL_VXLAN_OPT_BIT is not set, md is not updated and remains
pointing to _md. Later, vxlan_build_skb() is called with md, which
eventually calls vxlan_build_gbp_hdr():
if (vxflags & VXLAN_F_GBP)
vxlan_build_gbp_hdr(vxh, md);
Inside vxlan_build_gbp_hdr(), md->gbp is read:
if (!md->gbp)
return;
gbp = (struct vxlanhdr_gbp *)vxh;
...
if (md->gbp & VXLAN_GBP_DONT_LEARN)
gbp->dont_learn = 1;
If the stack contains garbage, this causes:
1) VXLAN_HF_GBP flag to be spuriously set in the VXLAN header.
2) gbp->dont_learn and gbp->policy_applied to be set from stack bits.
3) gbp->policy_id to receive 16 bits of uninitialized kernel stack data,
leaking it onto the wire.
Fix this by zero-initializing _md. If IP_TUNNEL_VXLAN_OPT_BIT is not
present, md->gbp remains 0, and vxlan_build_gbp_hdr() returns early
without modifying the VXLAN header.
-
CVE-2026-97964
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ppp_synctty: ensure a writeable skb header
ppp_sync_txmunge() checks headroom before prepending the address and
control bytes, but does not ensure that the skb header is writable.
A received skb can reach this function through PPP channel bridging
without passing through ppp_start_xmit(), which calls skb_cow_head().
For example, a PPPoE frame may share its buffer with a clone queued to
an AF_PACKET socket. If it is bridged to a synchronous tty channel, the
address/control bytes can overwrite data still visible to that socket.
Use skb_cow_head() to ensure both sufficient headroom and a writable
header.