-
CVE-2026-98003
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Do not reallocate GA log buffers on resume
Commit c5e1a1eb9279 ("iommu/amd: Simplify and Consolidate Virtual APIC
(AVIC) Enablement") moved the GA log allocation from iommu_init_pci()
to enable_iommus_vapic(), which is called on every resume.
iommu_init_ga_log() assigns iommu-ga_log and iommu->ga_log_tail
unconditionally. Each resume therefore replaces the boot-time pointers
and leaks both old allocations. The function also uses GFP_KERNEL from a
syscore resume callback, where interrupts are disabled and the non-boot
CPUs are offline.
Return early if both buffers are already allocated. Clear the pointers
in free_ga_log() so a partial allocation failure cannot leave ga_log
dangling.
-
CVE-2026-97995
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
virtio_console: do not free control-out buffers on remove
__send_control_msg() publishes &portdev-cpkt as the control-out
virtqueue cookie. remove_vqs() walks every virtqueue and passes leftover
cookies to free_buf(), which treats them as struct port_buffer and
reads sgpages.
If a control message is still on c_ovq when the device is unbound,
free_buf() reads past the ports_device object.
KASAN reported slab-out-of-bounds in free_buf():
free_buf
remove_vqs
virtcons_remove
unbind_store
The object was the ports_device allocated in virtcons_probe().
Drain c_ovq without freeing. The packet lives in portdev and is released
with it.
-
CVE-2026-97979
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ice: add missing xa_destroy for sched_node_ids
Commit 16dfa49406bc ("ice: Introduce new parameters in ice_sched_node")
added a sched_node_ids xarray to the port info structure, but never called
xa_destroy on it.
Since xarrays can allocate internal memory, this can result in a memory
leak even if every element in the xarray has been removed.
The xarray is currently embedded in the port_info structure. This appears
to have been done because its use is within functions that take the
port_info as a primary argument.
However, this complicates managing the lifecycle of the field. The
port_info structure is allocated in ice_init_hw() using devm, and it is
not released until the devm cleanup when the driver is unloaded.
The ice_init_hw() function is called in many places, including devlink
reload, and possibly during DDP load after updating the Tx scheduler
layout.
Adding a call of xa_destroy to the ice_deinit_hw() causes Sashiko to raise
multiple concerns due to potential ordering issues and possible ways that
port_info could be a dangling reference.
To handle this, move the sched_node_ids out of port_info and into the hw
structure. All users of the array already have a pointer to hw anyways, and
there is only one sched_node_ids per adapter. While here, remove the overly
verbose comment explaining the nature of the sched_node_ids xarray.
Add the missing xa_destroy to the cleanup path and to ice_deinit_hw(),
ensuring that we properly release the xarray memory.
This was caught by Sashiko during development of unrelated code.
-
CVE-2026-97977
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: Fix UAF of btusb_data by rx_work
btusb_close() and btusb_flush() cancel data-rx_work with the
asynchronous cancel_delayed_work(), so if btusb_rx_work() is already
running on another CPU it keeps running after the cancel returns.
btusb_disconnect() calls hci_unregister_dev(), which invokes
btusb_close(), and then frees the btusb_data. A still running
btusb_rx_work() then dereferences the freed data:
while ((skb = skb_dequeue(&data->acl_q)))
data->recv_acl(data->hdev, skb);
Use cancel_delayed_work_sync() instead. In btusb_close() the cancel also
has to happen after btusb_stop_traffic(), otherwise an URB completion
racing with the cancel can requeue the work right after it has been
waited for.
-
CVE-2026-97963
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: initialize ptp_lock at probe time
priv-ptp_lock is only initialized in stmmac_ptp_register(), which runs
during __stmmac_open(). However, the lock is also used while the
interface is down and has never been opened: tc_taprio_configure()
invokes the PTP gettime64() callback to compute the EST base time when
offloading a TAPRIO schedule, and stmmac_get_time() takes
priv->ptp_lock. Using an uninitialized rwlock is undefined behaviour.
Move the rwlock_init() to __stmmac_dvr_probe(), together with the other
private locks, so that ptp_lock is always valid regardless of the
interface state.
-
CVE-2026-97955
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: mana: restore the XDP program pointer when pre-allocation fails
mana_xdp_set() publishes the new program into apc-bpf_prog before it
allocates anything, because mana_pre_alloc_rxbufs() sizes the buffers
from it via mana_get_rxbuf_cfg(). When that allocation fails the
function returns the error directly, skipping the err_dealloc_rxbuffs
label which is the only place that restores the previous pointer.
The attach is reported as failed, so the BPF core drops the reference it
held for the caller and the program can be freed, while apc->bpf_prog
still points at it. The next consumer of mana_xdp_get() - typically
mana_chn_setxdp() from mana_alloc_queues() on the following ifup, or
after a TX timeout reset - then calls bpf_prog_add() on freed memory.
This is reachable from an ordinary "ip link set dev ethX xdp obj ..."
whenever the per-queue RX buffer pre-allocation cannot be satisfied.
Restore the previous program on that error path.
-
CVE-2026-97950
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
configfs: pin the symlink target's dirent instead of chasing -ci_dentry
create_link() reads the target's configfs_dirent from
item->ci_dentry->d_fsdata, relying on the item reference taken by
get_target(). That reference pins the item, not its dentry: the dentry is
pinned by DCACHE_PERSISTENT, which configfs_remove_dir() releases via
simple_rmdir() while the item is still alive. A symlink racing with rmdir
of its target can therefore find ->ci_dentry freed and its dirent
released, triggering WARN_ON(!atomic_read(&sd->s_count)) in configfs_get().
Take the dirent in get_target() as well, under ->d_lock and atomically
with the item reference, and pass it down to create_link(). A hashed
dentry has not been killed yet, so its ->d_fsdata reference keeps the
dirent alive there.
-
CVE-2026-97947
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
x86/amd_node: Fix potential NULL pointer dereference
amd_smn_read/write() are exported functions around __amd_smn_rw(), so
they are always available even if amd_smn_init() fails. In that case,
'amd_roots' is NULL and __amd_smn_rw() will access uninitialized memory.
Then, commit:
83518453074d ("x86/amd_node: Add SMN offsets to exclusive region access")
added the 'smn_exclusive' flag, which indicated the calls to
pci_request_config_region_exclusive() succeeded, to prevent
concurrent userspace access.
Commit:
0a4b61d9c2e4 ("x86/amd_node: Fix AMD root device caching")
re-ordered initialization so pci_request_config_region_exclusive() is
called earlier and a failure exits amd_smn_init() before allocating
'amd_roots'. The setting of 'smn_exclusive' moved to the end of
amd_smn_init(), after 'amd_roots' is allocated. It became redundant
and can be removed.
Replace 'smn_exclusive' with directly checking 'amd_roots', to fix a
potential NULL pointer dereference and to simplify the logic.
[ bp: Reorg commit message, touchup comment. ]
[ mingo: Rebase & further touchups. ]
-
CVE-2026-97943
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Acquire init_mm write lock on collapse to avoid UAF
x86 implements page attribute modification using its Change Page
Attributes (CPA) mechanism.
This tracks properties of ranges such as cache mode through x86 page
attributes, and as part of that logic manipulates kernel page tables.
Since commit:
41d88484c71c ("x86/mm/pat: restore large ROX pages after fragmentation")
ranges of kernel page table entries can be collapsed into
huge page table entries as part of this logic.
As part of this collapse, it frees the page tables which the collapsed
entries previously pointed to, and it does so without any relevant locks
being held to preclude concurrent kernel page table walkers.
The only way this code can be reached is if CPA_COLLAPSE is specified, and
this is only set in set_memory_rox() via:
set_memory_rox()
- change_page_attr_set_clr()
-> cpa_flush()
-> cpa_collapse_large_pages()
Notable users of this are execmem and BPF when manipulating executable
mappings.
However, this is problematic for ptdump as it walks ranges it does not own
and thus runs the risk of a use-after-free on page tables freed underneath
it.
In addition, concurrent CPA collapse operations are possible which can also
cause races.
Resolve the issue by acquiring the mmap write lock on init_mm across the
whole operation.
It is safe to acquire a sleeping lock as all the callers invoke
set_memory_rox() from process context and in any case,
change_page_attr_set_clr() calls vm_unmap_alias() which ultimately takes a
mutex, disallowing atomic context here.
-
CVE-2026-97942
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
x86/alternatives: Exclude text poking against change_page_attr()
From time to time, the following BUG can be observed
in the x86 alternatives patching code [0]:
kernel BUG at arch/x86/kernel/alternative.c:2576!
> Oops: invalid opcode: 0000 [#1] SMP NOPTI
> CPU: 0 UID: 0 PID: 355 Comm: (udev-worker) Not tainted 7.1.3-1-default #1 PREEMPT(full) openSUSE Tumbleweed 8c1795b03ec64f997e57a8ad38b1161e3b98da64
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022
> RIP: 0010:__text_poke+0x2aa/0x450
> Call Trace:
> TASK>
> smp_text_poke_batch_finish+0x2a7/0x320
> __static_call_transform+0xb7/0x220
> arch_static_call_transform+0x5b/0xb0
> __static_call_init+0xe9/0x270
> static_call_module_notify+0x11f/0x150
> notifier_call_chain+0x61/0xe0
> blocking_notifier_call_chain_robust+0x63/0xc0
> load_module+0x1c92/0x20c0
> init_module_from_file+0xd8/0x140
> idempotent_init_module+0x100/0x2f0
> __x64_sys_finit_module+0x71/0xe0
> do_syscall_64+0xe1/0x610
> entry_SYSCALL_64_after_hwframe+0x76/0x7e
which matches the following BUG_ON() in alternative.c:
/*
* If something went wrong, crash and burn since recovery paths are not
* implemented.
*/
BUG_ON(!pages[0] || (cross_page_boundary && !pages[1]));
This can happen if vmalloc_to_page() fails, for any reason. Such can happen
if text poking races with CPA, which can possibly result in the collapsing
of page tables (or breaking of PMD hugepages). It is not a problem for most
users of vmalloc_to_page() (they solely own the vmalloc'd range) but, when
CONFIG_ARCH_HAS_EXECMEM_ROX=y, various modules own a single execmem vmalloc
range, and can call set_memory_*() in parallel on it. This can happen to
race against __text_poke and cause havoc in vmalloc_to_page().
Fix it by excluding against CPA using the init_mm mmap read lock.
[ dhansen: Fix up SoB ordering. The actual code flow here was:
Pedro=>Lorenzo=>Mike=>Me which is reflected in the SoB chain
now. I *believe* Mike simply picked up Lorenzo's update to
Pedro's post from the Link ]
-
CVE-2026-97934
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix memory corruption from a "STACKTRACE" histogram key
"cpu", "CPU", "stacktrace" and "STACKTRACE" are generic fields, defined
with an offset and a size of zero so that the filter code can match them
by name. parse_field() maps them onto their common_* equivalents for
backward compatibility, but unlike the common_* names it hands the
placeholder back to the caller instead of NULL.
create_hist_field() takes a non-NULL field as a promise that the record
carries a stacktrace and picks HIST_FIELD_FN_STACK, so the __data_loc
word is read from offset 0, that is from common_type, and its low 16
bits are followed as an offset into the record. What is found there
becomes the length of an unbounded memcpy. Pick an event whose id is
small enough that the offset stays inside its own record and the length
is a kernel text address:
# cd /sys/kernel/tracing
# echo 'hist:keys=STACKTRACE' events/ftrace/print/trigger
# echo hello > trace_marker
Oops: general protection fault, probably for non-canonical address
RIP: 0010:rb_next+0x23/0x60
/IRQ>
RIP: 0010:memcpy+0xc/0x30
event_hist_trigger+0x2e7/0x12c0
Kernel panic - not syncing: Fatal exception in interrupt
Leave the field NULL, which is what the comment above the branch says
the code does and what common_stacktrace already does. FILTER_CPU and
FILTER_COMM are left alone, their create_hist_field() branches never
look at the field.
-
CVE-2026-97931
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ALSA: us122l: Prevent write upgrades for read mappings
The hwdep mmap callback rejects read-buffer mappings that are initially
writable, but leaves VM_MAYWRITE set on mappings created with PROT_READ.
A process that can open the hwdep node O_RDWR can later use mprotect() to
make the mapping writable.
The read allocation begins with struct usb_stream. Its read_size member is
used by the fault handler to decide which pages belong to the read buffer.
The read VMA intentionally remains expandable because pcm_usb_stream uses
mremap() after reading that size. Changing read_size first can therefore
map and access pages beyond the allocation. The same member is also
consumed by usb_stream_free(), where changing it can make
free_pages_exact() release pages outside the allocation.
Clear VM_MAYWRITE for read-buffer mappings after rejecting an initially
writable VMA. This keeps the separate output-buffer mapping writable while
preventing later permission upgrades.
-
CVE-2026-97929
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usbusx2y: validate URB actual_length in interrupt callback
i_usx2y_in04_int() processes the interrupt URB data without checking
urb-actual_length. A short transfer from a malfunctioning device
would cause the handler to process uninitialized heap data from the
kmalloc-allocated in04_buf, which is then copied to the mmap-accessible
ctl_snapshot[] array.
Fix by using kzalloc() for in04_buf to zero-initialize the buffer,
and adding an actual_length check to skip processing on short
transfers while still resubmitting the URB.
-
CVE-2026-97928
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: skip the VMID 0 flush for VRAM
Clear-on-release only runs on VRAM, which amdgpu_ttm_map_buffer() reaches
via its direct MC address without programming a GART window, yet the wipe
still forces a VMID 0 flush. On GFX11 (e.g. Navi33) that spurious SDMA
flush can wedge the engine; only flush when a GART window is actually used.
v2: Let amdgpu_ttm_map_buffer() return whether the VMID 0 flush is needed,
and drive the clear and copy paths from that. (Christian)
v3: Make the vm_needs_flush output parameter mandatory instead of
allowing NULL. (Christian)
(cherry picked from commit a306e406e570b74318ff7d80e5b07b540ca1d3a9)
-
CVE-2026-97926
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ufs: validate cylinder group metadata before caching it
ufs_read_cylinder() copies the cylinder group index and the rotor
positions straight from the on-disk group and caches them without any
check:
ucpi-c_cgx = fs32_to_cpu(sb, ucg->cg_cgx);
ucpi->c_rotor = fs32_to_cpu(sb, ucg->cg_rotor);
ucpi->c_frotor = fs32_to_cpu(sb, ucg->cg_frotor);
ucpi->c_irotor = fs32_to_cpu(sb, ucg->cg_irotor);
They are then used as indices during allocation and free:
- c_cgx indexes the cylinder summary array as
UFS_SB(sb)->fs_cs(ucpi->c_cgx), so a value past s_ncg writes a 32
bit count outside the s_csp allocation.
- c_frotor becomes a bitmap scan start, start = c_frotor >> 3, and
then length = ((s_fpg + 7) >> 3) - start. A start beyond the block
bitmap wraps the unsigned length to a huge value, so ubh_scanc()
walks far past the cylinder group buffers. c_irotor drives the
inode bitmap the same way.
A crafted image can set any of these freely, turning an ordinary
allocation into an out of bounds access.
Reject a cylinder group whose recorded index does not match the group
being read, or whose rotors fall outside the group, before the metadata
is cached. Valid filesystems keep cg_cgx equal to the group number and
the rotors within the group, so only malformed images are rejected.
-
CVE-2026-97920
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Keep the entry count when the histogram stats allocation fails
print_entries() uses n_entries both as the number of sort entries and as
its own return value, so the -ENOMEM it stores when the stats allocation
fails overwrites the count that the cleanup still needs:
n_entries = tracing_map_sort_entries(map, ...);
if (n_entries 0)
return n_entries;
...
if (!stats) {
n_entries = -ENOMEM;
goto out;
}
...
out:
tracing_map_destroy_sort_entries(sort_entries, n_entries);
tracing_map_destroy_sort_entries() takes an unsigned int and loops up to
it, so -ENOMEM arrives as 4294967284. It walks an array of at most
map-max_elts pointers and calls destroy_sort_entry(), which dereferences
and frees, on whatever lies past the end.
Reading the hist file of a trigger with a .percent value, with that
allocation forced to fail:
BUG: KASAN: vmalloc-out-of-bounds in tracing_map_destroy_sort_entries+0xa0/0xb0
Read of size 8 at addr ffffc90000045000 by task init/1
tracing_map_destroy_sort_entries+0xa0/0xb0
hist_show+0x6f7/0x1df0
seq_read_iter+0x2b8/0x1190
vfs_read+0x176/0xa40
The buggy address belongs to a 4-page vmalloc region starting at
ffffc90000041000 allocated at tracing_map_sort_entries+0x5c/0xd50
A few pages further the fault is fatal. The registers at the oops confirm
the bound: the loop's end pointer less the array start, over the pointer
size, is 4294967284.
Return the error in a separate variable and leave n_entries holding the
count, the way tracing_map_sort_entries() does on its own error path.
The stats block is only entered for a value carrying .percent or .graph,
which __create_val_field() has rejected since v6.3, so this cannot be
reached in mainline as it stands. It becomes reachable again with
"tracing: hist: let values keep the percent and graph modifiers", so it
should be applied first.
-
CVE-2026-97917
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Validate full buffer range in ivpu_to_cpu_addr
Add a size parameter to ivpu_to_cpu_addr() and validate that the
whole [vpu_addr, vpu_addr + size) range stays within the BO.
-
CVE-2026-97913
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Ensure cmd stream ends with a stop op
While the QSIZE register setting should prevent an out of bounds access
of the command stream, it is not clear whether the h/w generates an
interrupt in this case as is required (to prevent a timeout). As a stop op
is expected end of the command stream, let's just ensure it is present. A
stop op in the middle of the command stream also makes no sense.
-
CVE-2026-97911
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Ensure SRAM region size matches job
It is possible for userspace to set the job SRAM size to 0, but then still
have SRAM accesses in the command stream. When the job SRAM size is 0,
setting the region base register is skipped and a stale base address from
a prior job is used.
Check the region size against the job's SRAM size instead of just the size
of the SRAM. The job's SRAM size was already checked against the total SRAM
size.
-
CVE-2026-97973
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: macb: destroy the phylink instance on the probe error path
macb_mii_init() creates a phylink instance on both of its success paths,
but the probe unwind frees the netdev without destroying it, so a failing
macb_alloc_tieoff() or register_netdev() leaks the instance.
Destroy it at err_out_unregister_mdio, which is only reachable once
macb_mii_init() has succeeded, so bp-phylink is valid there.