-
CVE-2026-93173
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf,lsm: Drop bpf_prog_free from sleepable_lsm_hooks
__bpf_prog_put_rcu() is the call_rcu() callback for non-sleepable programs.
security_bpf_prog_free() called from there fires bpf_prog_free in softirq;
if a sleepable LSM prog is attached to that hook, might_fault() BUGs:
BUG: sleeping function called from invalid context
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 5038
preempt_count: 101, expected: 0
Call Trace:
IRQ
__bpf_prog_enter_sleepable+0x1cd/0x320 kernel/bpf/trampoline.c:1255
bpf_trampoline_6442549705+0x53/0xd7
security_bpf_prog_free+0xde/0x130 security/security.c:5465
__bpf_prog_put_rcu+0xab/0xd0 kernel/bpf/syscall.c:2365
rcu_do_batch kernel/rcu/tree.c:2617 [inline]
handle_softirqs+0x236/0x800 kernel/softirq.c:622
The call_rcu/call_rcu_tasks_trace split reflects the freed program's
sleepability, not that of any attached observer.
security_bpf_prog_free() also frees prog->aux->security, which has to stay
after the grace period, so drop bpf_prog_free from sleepable_lsm_hooks
rather than move the call. Non-sleepable observers still run there.
-
CVE-2026-93170
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx_dma: Fix channel idle state management in AXIDMA and MCDMA interrupt handlers
Fix a race condition in AXIDMA and MCDMA irq handlers where the channel
could be incorrectly marked as idle and attempt spurious transfers when
descriptors are still being processed.
The issue occurs when:
1. Multiple descriptors are queued and active.
2. An interrupt fires after completing some descriptors.
3. xilinx_dma_complete_descriptor() moves completed descriptors to
done_list.
4. Channel is marked idle and start_transfer() is called even though
active_list still contains unprocessed descriptors.
5. This leads to premature transfer attempts and potential descriptor
corruption or missed completions.
Only mark the channel as idle and start new transfers when the active list
is actually empty, ensuring proper channel state management and avoiding
spurious transfer attempts.
-
CVE-2026-93165
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: sensorhub: Fix memory overread in ring handler
`max_response` and `sensor_num` are read from different EC commands:
- `max_response` is from cros_ec_get_proto_info().
ec_dev-max_response = info->max_response_packet_size -
sizeof(struct ec_host_response);
- `sensor_num` is from cros_ec_get_sensor_count().
sensor_num = cros_ec_get_sensor_count(ec);
With a malfunctioning EC firmware, it is possible that the `msg->insize`
(i.e., `fifo_info_length` in the context) could be clamped in
cros_ec_cmd_xfer() because `msg->insize` is greater than `max_response`.
int fifo_info_length =
sizeof(struct ec_response_motion_sense_fifo_info) +
sizeof(u16) * sensorhub->sensor_num;
This means the number of read bytes could be less than expected. As a
result, the subsequent memcpy() in cros_ec_sensorhub_ring_handler()
overreads the `resp->fifo_info` buffer.
Check the return value of cros_ec_cmd_xfer_status() and abort if the
number of bytes read does not match the expected length.
-
CVE-2026-93159
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-sha204a - fix heap info leak on I2C transfer failure
The nonblocking RNG path allocates a work_data structure to track the
state of an in-flight asynchronous I2C request. This pointer is stored
in rng-priv and later consumed by the read path once the transaction
completes.
If the underlying I2C transfer fails, the completion callback is invoked
with a non-zero status. In this case, the allocated work_data is not
usable for producing RNG output and must not remain associated with the
hwrng state.
Previously, the failure path only logged a warning but left the pointer
state uncleared, which can result in subsequent read attempts observing
stale state and interpreting it as valid completion data.
Fix this by freeing the pending work_data. The I2C transaction reports
an error. This ensures that failed requests do not leave residual state
behind that could be interpreted as valid RNG data on later reads.
Clearing rng->priv is done at the subsequent call to nonblocking read.
-
CVE-2026-93157
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
hwrng: xilinx-trng - propagate timeout before any data is read
xtrng_readblock32() polls for 16-byte chunks but returns the number of
bytes read even when the first poll times out. Its caller then treats a
zero return as a short successful read, and partial reads for full
32-byte blocks can make the tail copy use a fixed block offset rather
than the amount already produced.
Return the poll error when no data has been read, preserve partial
positive returns after some data is available, stop the generator on all
collection exits, and append tail bytes at the current output count.
-
CVE-2026-93155
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
crypto: keembay - Fix AEAD unregister count in error path
register_aes_algs() registers the AEAD algorithms before registering the
skcipher algorithms. If skcipher registration fails, the function unwinds
the earlier AEAD registration with crypto_engine_unregister_aeads(), but it
passes ARRAY_SIZE(algs), which is the skcipher table size.
Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper
iterates over the same table that was registered. Also clarify the nearby
comment: the crypto registration helpers clean up algorithms registered
within the same call, while this function must still unwind earlier
successful registration steps.
-
CVE-2026-93148
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject MEM_ALLOC BTF accesses past object bounds
BTF struct walks relax the struct-size check for accesses through a
trailing flexible array. That is valid for ordinary BTF type walking, but
PTR_TO_BTF_ID | MEM_ALLOC values point to objects allocated with the static
BTF type size.
When walking a MEM_ALLOC object, reject the access before applying the
flexible-array relaxation if the access range extends past the struct size.
Apply the same policy to struct ID matching so kfunc and kptr type checks
do not walk past the allocated object bounds either.
-
CVE-2026-93124
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: asus-wireless: Fail probe when there is no ACPI match
Every platform driver can be forced to match a device that does not match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device ACPI companion
object need to verify its presence.
asus_wireless_probe() returns success when acpi_match_acpi_device()
finds no match, leaving behind an input device that never reports
anything because the notify handler is not installed. Worse, when the
driver is force-bound to a device without an ACPI companion, probe
still succeeds and stores a NULL companion pointer, which
asus_wireless_remove() later passes to acpi_dev_remove_notify_handler(),
leading to a NULL pointer dereference on unbind.
Return -ENODEV when the device does not match the ID table. This also
covers the missing-companion case, because acpi_match_acpi_device()
rejects a NULL device. Perform the check before allocating any driver
state, instead of after the input device has already been registered.
-
CVE-2026-93122
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uac: validate rate list length before storing
UAC1 and UAC2 configfs rate-list attributes parse a comma-separated
list of sampling rates and store each parsed value in fixed-size arrays.
The arrays have UAC_MAX_RATES entries, but the store paths do not check
that the input contains at most that many tokens before writing through
opts-name##s[i++].
Writing more than ten rates therefore writes past the end of the
p_srates[] or c_srates[] array in struct f_uac1_opts or struct
f_uac2_opts.
With CONFIG_UBSAN_BOUNDS enabled, writing an 11-entry rate list to the
UAC1 p_srate attribute reports:
UBSAN: array-index-out-of-bounds
drivers/usb/gadget/function/f_uac1.c:1669:1
index 10 is out of range for type 'int [10]'
__ubsan_handle_out_of_bounds.cold
f_uac1_opts_p_srate_store
configfs_write_iter
vfs_write
ksys_write
do_syscall_64
The same reproducer against the UAC2 p_srate attribute reports:
UBSAN: array-index-out-of-bounds
drivers/usb/gadget/function/f_uac2.c:2087:1
index 10 is out of range for type 'int [10]'
__ubsan_handle_out_of_bounds.cold
f_uac2_opts_p_srate_store
configfs_write_iter
vfs_write
ksys_write
do_syscall_64
Reject additional tokens once UAC_MAX_RATES entries have been parsed.
Also keep the original kstrdup() pointer for kfree(), because strsep()
advances the parsing cursor. Freeing the advanced cursor leaks the
original buffer on successful parses and can free an interior pointer on
some error paths.
-
CVE-2026-93118
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: aspeed_udc: check endpoint DMA allocation
ast_udc_probe() allocates a coherent DMA buffer used as the backing store
for endpoint buffers. ast_udc_init_ep() derives per-endpoint buffer
pointers from udc-ep0_buf, so a failed allocation is dereferenced during
probe.
Check the allocation before endpoint setup. The existing probe error path
called ast_udc_remove(), which unregisters the gadget unconditionally and
is not safe before usb_add_gadget_udc() succeeds. Add a local cleanup
helper for probe failures so pre-registration failures only unwind the
resources that were actually initialized.
This was found by a local static analysis checker for unchecked allocator
returns while scanning Linux 6.16. The change was checked by applying it
to current mainline and by running checkpatch. I do not have access to
Aspeed UDC hardware, so no runtime testing was performed.
-
CVE-2026-93107
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Avoid reprocessing the current packet after the QP enters the error state
When do_complete() finds the QP in the error state it returns
RESPST_CHK_RESOURCE. Before commit 49dc9c1f0c7e ("RDMA/rxe: Cleanup
reset state handling in rxe_resp.c") this was the flush loop:
check_resource() had an error-state branch that fetched each remaining
recv WQE and completed it with IB_WC_WR_FLUSH_ERR, without touching
the current packet. That commit removed the error-state branch from
check_resource() (draining is now done at rxe_receiver() entry) but
kept the do_complete() error-state return.
As a result, when a QP moves to the error state while a packet is
being completed - e.g. an rdma_cm disconnect racing with receive
processing - the responder state machine loops back into the request
processing chain with the already-completed packet still in hand:
check_resource() fetches a fresh recv WQE, execute()/send_data_in()
copies the same packet payload again, do_complete() posts another
IB_WC_SUCCESS CQE (qp-resp.status is still 0), and control returns
to the error-state check. The loop re-executes the same packet once
per posted recv WQE (observed: ~1000 duplicate IB_WC_SUCCESS
completions of one SEND, one per ~8us, matching the RQ occupancy)
until the RQ is exhausted, after which qp->resp.wqe is NULL and
send_data_in() dereferences it:
BUG: kernel NULL pointer dereference, address: 0000000000000014
Workqueue: rxe_wq do_work
RIP: copy_data+0x29/0x1f0
Call Trace:
send_data_in+0x25/0x50
rxe_receiver+0xf36/0x1dd0
The duplicate completions are indistinguishable from real receives to
the ULP. During an rds stress test, the message was accepted as new and
delivered the same datagram to user space hundreds of times, corrupting
the stream; any ULP that relies on RC exactly-once delivery is affected.
A live packet reaching the error-state check in do_complete() has
been executed and completed exactly once and must be consumed, not
re-processed. Return RESPST_CLEANUP for it (dequeue and free); keep
returning RESPST_CHK_RESOURCE for the pkt == NULL case.
-
CVE-2026-93106
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
crash_dump: release keyring reference at the correct time
restore_dm_crypt_keys_to_thread_keyring() gets a reference to the user
keyring before restoring the saved dm-crypt keys.
The same keyring reference is then passed to add_key_to_keyring() for each
saved key, but add_key_to_keyring() drops that reference on every call.
This is only balanced when exactly one key is restored. With multiple
keys, the keyring reference is dropped too many times and may trigger a
refcount underflow or use-after-free.
When more than five keys are restored, a refcount underflow/use-after-free
warning can be triggered.
The early error paths after lookup_user_key() also return without dropping
the keyring reference.
Keep ownership of the keyring reference in
restore_dm_crypt_keys_to_thread_keyring(), drop it once on all exit paths,
and make add_key_to_keyring() only use the reference without consuming it.
-
CVE-2026-93103
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Preserve unit 0 on allocation failure
hfi1_free_devdata() assumes that the device was inserted into the unit
table and unconditionally erases dd-unit. If xa_alloc_irq() fails, the
zero-initialized unit remains zero, so full cleanup can remove an
unrelated device from index 0.
Release only the rdmavt allocation and return immediately while the unit
table has not acquired the device.
-
CVE-2026-93102
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Free RX data on late probe failure
hfi1_init_dd() allocates the shared AIP/VNIC RX support before returning.
If hfi1_init() or hfi1_register_ib_device() later fails, init_one() tears
down the device data without calling hfi1_free_rx(). This leaks netdev_rx
and its dummy netdev.
Free the RX support after IB unregistration and before postinit_cleanup(),
as done on normal device removal.
-
CVE-2026-93097
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
cxl/mbox: Break poison list loop on an empty payload
A device that returns count == 0 with CXL_POISON_FLAG_MORE set on every
iteration never advances nr_records, so the max_errors guard never
trips and the do/while loops forever while holding poison.mutex. That
hangs the sysfs-triggered scan thread and blocks all subsequent poison
operations on the device. The existing "Protect against an uncleared
_FLAG_MORE" guard was intended to bound a misbehaving device but does
not cover the count == 0 case.
Stop the loop on an empty payload so a malfunctioning or malicious
device cannot wedge the poison scan.
-
CVE-2026-93094
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix dp_link_peer dangling references on AP vdev rollback
ath12k_mac_vdev_create() for an AP vdev creates the bss self-peer via
ath12k_peer_create(), which finishes by calling
ath12k_dp_link_peer_assign() to publish the dp_link_peer in the
dp_hw-dp_peers[peerid_index] RCU table, in the dp_peer's
link_peers[] array, and in the per-addr rhashtable.
If a step after ath12k_peer_create() fails the function jumps to
err_peer_del, which open-codes a WMI peer_delete and waits for the
unmap / delete_resp events. The wait_for_peer_delete_done() path
relies on ath12k_dp_link_peer_unmap_event() freeing the dp_link_peer
when the unmap arrives, but err_peer_del never calls
ath12k_dp_link_peer_unassign() first. The published references in
the dp_hw RCU table, dp_peer->link_peers[] and the rhashtable are
left pointing at the dp_link_peer that unmap_event then frees,
producing dangling pointers and use-after-free on subsequent
lookups.
Replace the open-coded sequence with a call to ath12k_peer_delete(),
which already does ath12k_dp_link_peer_unassign() before sending the
WMI command. This drops the published references before the
dp_link_peer is freed, in the same order as the normal teardown path
in ath12k_mac_remove_link_interface().
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3
-
CVE-2026-93089
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Free transport channel on IDR failure
If transport channel setup succeeds but the following IDR insertion fails,
the error path destroys the transport device and frees the channel info
without invoking the transport cleanup callback.
Call chan_free() before destroying the device so transport specific
resources such as IRQs, mailbox channels and mapped shared memory are
released consistently with the normal teardown path.
-
CVE-2026-93084
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Drop handle on protocol bind failures
The SCMI bus notifier acquires an SCMI handle when the driver core emits
BUS_NOTIFY_BIND_DRIVER, before invoking the protocol driver probe
callback. The protocol probe path only checks whether sdev-handle is
set.
If device_link_add() fails after the handle has been acquired, the
protocol device can still bind with a valid handle but without the
dependency link to the SCMI parent. A concurrent parent unbind can then
miss the child and tear down the SCMI instance while the child still
holds a handle into it.
If the protocol driver probe later fails, for example with
-EPROBE_DEFER, the driver core emits BUS_NOTIFY_DRIVER_NOT_BOUND rather
than BUS_NOTIFY_UNBOUND_DRIVER. The SCMI notifier only released the
handle on BUS_NOTIFY_UNBOUND_DRIVER, so each failed protocol-device bind
leaked the SCMI instance users refcount and left sdev->handle set after
the failed probe.
Make the link helper report failure and drop the acquired handle if the
link cannot be created. Also handle BUS_NOTIFY_DRIVER_NOT_BOUND in the
same cleanup path used for unbind so failed probes balance the earlier
BUS_NOTIFY_BIND_DRIVER acquisition.
-
CVE-2026-93083
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Unwind TX receiver mailbox setup failure
mailbox_chan_setup() can request an additional unidirectional TX
receiver channel after successfully acquiring the primary channel. If
that second request fails, the function returns immediately and leaves
the primary channel allocated.
Unwind the primary mailbox channel before returning the error so probe
deferral or other setup failures do not leave the channel busy for later
probe attempts.
-
CVE-2026-93082
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Unwind P2A receiver mailbox setup failure
mailbox_chan_setup() can request an additional P2A receiver channel after
successfully acquiring the primary P2A channel. If that later request
fails, the function returns immediately and leaves the primary channel
allocated.
Unwind the primary mailbox channel before returning the error so probe
deferral or other setup failures do not leave the channel busy for later
probe attempts.