-
CVE-2026-99138
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
tcp: fix use-after-free in do_tcp_getsockopt(TCP_CC_INFO)
do_tcp_getsockopt() reads icsk-icsk_ca_ops and dereferences the
get_info function pointer without rcu_read_lock(). With BPF struct_ops
congestion control, ca_ops can point to dynamically allocated memory
that is freed concurrently, resulting in a use-after-free when the
kernel dereferences or calls through the stale pointer.
BUG: KASAN: slab-use-after-free in do_tcp_getsockopt+0x2037/0x23e0
Read of size 8 at addr ffff888013701258 by task exploit/149
do_tcp_getsockopt+0x2037/0x23e0 (net/ipv4/tcp.c:4564)
tcp_getsockopt+0x91/0xf0
__sys_getsockopt+0xf7/0x170
Fix this by wrapping the ca_ops load and get_info call within
rcu_read_lock()/rcu_read_unlock(), and using READ_ONCE() to load
the icsk_ca_ops pointer.
-
CVE-2026-99125
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
s390/pai: Handle multiple PMU stop callback invocations
Handle the following scenario:
The kernel protects itself against a very high sampling load and
throttles the sampling using:
perf_event_throttle() -- PMU->stop()
Shortly later the scheduler may terminate the task and removes it from the
CPU. It again calls
PMU->stop()
which results in two invocations of PMU->stop() called back to back.
Protect against this and check the PERF_HES_STOPPED bit on function
entry. If it is already set return.
Clear bit PERF_HES_STOPPED in PMU->start().
Prohibit ioctl(fd, PERF_EVENT_IOC_PERIOD, ...) call for this event.
It sets perf_event::event_limit to a positive value and causes
perf_event_overflow() to invoke pai_stop() call back function when
perf_event::event_limit hits zero. This is not supported because the
sample events CRYPTO_ALL and NNPA_ALL are only taken at schedule out
of a task.
Use list_for_each_entry_safe() for safe iteration over syswide_list
in pai_have_samples().
-
CVE-2026-99124
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
s390/pci: Fix leak of uninitialized kernel data in SCLP report
While report_error_write() checks that the provided buffer is at least
as large as the header struct, but not that it is large enough to
contain the report with the length claimed by report-length. If
user-space provides a short buffer, meaning a larger report->length than
the actually written payload, up to around 4K of kernel data from past
the kmalloc(len + 1) sized buffer allocated in kernfs_fop_write_iter()
will leak into the SCLP report.
However, as the entity processing the SCLP is privileged and able to
access at least the page including the report, this does not leak data
that entity could not access but it is still an out of bounds read and
a malformed error report that should be rejected.
-
CVE-2026-99118
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/i915/dmc: Harden DMC firmware payload parsing
Validate the conversion of the DMC firmware size from dwords to bytes
using check_mul_overflow() before calculating the firmware payload size.
Reject zero-length payloads and zero MMIO counts in the DMC firmware
header so malformed firmware is caught early. Also set dmc_fw_size only
after the payload allocation succeeds.
(cherry picked from commit efde6601a1f1daedfe3dcc2816c934ddb44e3eef)
-
CVE-2026-99114
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: initialize FileSystemControlFlags in FS_CONTROL_INFORMATION
smb2_get_info_filesystem() reports 48 bytes for FS_CONTROL_INFORMATION,
that is the whole of struct smb2_fs_control_info, but never assigns
FileSystemControlFlags. Those four bytes go to the client as they are
found in the response buffer.
The buffer is zeroed on allocation, so a standalone request leaks
nothing. A compound request can leak: the offset of the next response
is advanced by the length pinned for the previous one, so a reply that
was written into the buffer and then dropped in favour of the short
error response of smb2_set_err_rsp() stays there, and the next reply is
laid over it with only the header cleared.
ksmbd does not implement quota tracking, so report no control flags.
-
CVE-2026-99110
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix heap overflow in cifs_do_set_acl()
cifs_set_acl() validates ACL size using posix_acl_xattr_size():
4 + (count * 8) // 4-byte header + 8 bytes per ACE
cifs_do_set_acl() then calls posix_acl_to_cifs() to write the CIFS
wire format into the same buffer:
6 + (count * 10) // 6-byte header + 10 bytes per ACE
An ACL that passes the xattr-based check in cifs_set_acl() can
overflow the heap when posix_acl_to_cifs() writes the larger CIFS
format.
Validate the CIFS format size against the remaining buffer space and
USHRT_MAX before converting--data_count is __u16, so sizes above
USHRT_MAX truncate the on-wire packet length, causing the server to
apply a partial ACL. Replace MaxDataCount = 1000 with
min(CIFSMaxBufSize, USHRT_MAX).
-
CVE-2026-99109
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject SetEA requests that do not fit the request buffer
CIFSSMBSetEA() copies the caller's extended attribute value into the
SMB request buffer without checking that it fits. The requirement is
stated in the source but was never implemented:
/*BB add length check to see if it would fit in
negotiated SMB buffer size BB */
/* if (ea_value_len buffer_size - 512 (enough for header)) */
if (ea_value_len)
memcpy(parm_data->list.name + name_len + 1,
ea_value, ea_value_len);
The only bound applied on the way in is in cifs_xattr_set():
#define MAX_EA_VALUE_SIZE CIFSMaxBufSize
...
if (size > MAX_EA_VALUE_SIZE)
CIFSMaxBufSize is the full payload capacity of the buffer, so a value
of exactly that size leaves no room for the SMB header, the TRANS2
parameter block, the fealist header and the EA name that are written
ahead of it in the same object.
SendReceive() already enforces the correct limit on this very length:
if (in_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE)
but it is called after the copy has taken place. An unprivileged
setxattr(2) on an SMB1 mount with a 250-byte name and a 16384-byte
value writes 16384 bytes starting 345 bytes into a 16588-byte
cifs_request object, ending 141 bytes past it:
BUG: KASAN: slab-out-of-bounds in CIFSSMBSetEA+0xabc/0xde0
Write of size 16384 at addr ffff888003aa0159 by task init/68
__asan_memcpy+0x3c/0x60
CIFSSMBSetEA+0xabc/0xde0
cifs_xattr_set+0xd3a/0xff0
__vfs_setxattr+0x13e/0x1a0
The buggy address is located 345 bytes inside of
allocated 16588-byte region
Apply SendReceive()'s limit to the assembled request before the copy
rather than after it, and widen the byte counters so the sum cannot
wrap before it is tested.
byte_count is also tested against U16_MAX, because it is stored in the
16-bit pSMB->ByteCount. That becomes reachable when CIFSMaxBufSize is
raised at module load, where it may be set as high as 1024*127: with a
5-byte EA name and a 65521-byte value, count is exactly U16_MAX while
byte_count is 65556, and cpu_to_le16() would truncate it to 20 and
transmit a frame whose ByteCount does not match its length. Testing
byte_count covers count as well, since byte_count is the larger of the
two and count's only 16-bit consumer is written after this point.
check_add_overflow() is evaluated first so that total_len is assigned
before it is reported.
-
CVE-2026-99108
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix FITRIM range alignment
ntfs_trim_fs() aligns the start of a free extent up to the device discard
granularity, but derives the discard length by aligning the original extent
length down. When the free extent start is not discard-aligned, adding that
length to the aligned start can extend the discard past the free extent and
into allocated clusters.
For example, with 4 KiB clusters and 32 KiB discard granularity, the free
extent [4 KiB, 36 KiB) becomes the discard range [32 KiB, 64 KiB), so
28 KiB beyond the free extent may be discarded.
Align the absolute end of the free extent down and derive the length from
the two aligned endpoints. Skip extents that contain no full discard unit.
Reproduced with a 4 KiB-cluster NTFS filesystem on scsi_debug configured
for 32 KiB discard granularity and read-zero-after-trim. Before this
change, FITRIM zeroed seven allocated 4 KiB clusters following an unaligned
32 KiB hole. With this change, the same data remains intact across FITRIM
and remount.
-
CVE-2026-99104
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix the bypass dispatch claim for schedulers bypassed by an ancestor
scx_bypass() claims bypass dispatch when the scheduler's depth goes from
zero to one and releases it when the depth returns to zero, but propagates
only the depth to the descendants, not the claim. A descendant that starts
bypassing with its ancestor never claims, and one whose own bypass ends
under the ancestor's keeps its claim, as its depth does not return to zero.
A sub-scheduler enable whose bypass ends under a PM suspend thus leaks its
claim: the parent keeps hosting bypass dispatch and the sub-scheduler's next
bypass trips the WARN_ON_ONCE() on the claim. A sub-scheduler disable that
starts under a PM suspend has no claim, so once the resume lifts the root's
bypass its tasks sit on the parent's bypass DSQs with nobody consuming them.
Claim for every descendant whose depth goes from zero to one in the
propagation and release every scheduler in the subtree whose depth returned
to zero once the tasks have moved out of the bypass DSQs. A parent that is
bypassing itself when a descendant claims consumes only its own bypass DSQs,
empty until it leaves bypass and becomes the host.
-
CVE-2026-9254
•
published on August 24, 2026
An unauthenticated OS command injection vulnerability exists in the parental control functionality of Archer BE800 V1, BE3600 V1, and AX75 V1 due to improper filtering and neutralization of special characters in certain parameters. A LAN-based attacker can inject arbitrary commands and execute them with root privileges.
Successful exploitation may result in complete device compromise and impact the confidentiality, integrity, and availability of the affected device and network traffic.
-
CVE-2026-9239
•
published on October 30, 2026
The Meow Gallery plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Attachment Alt Text (aria-label attribute) in all versions up to, and including, 5.5.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The vulnerable code path is only reachable when a gallery item is rendered as a link (i.e., link_href is non-empty), and exploitation relies on the fact that WordPress's sanitize_text_field() strips angle-bracketed tags but preserves double quotes, allowing an attacker to break out of the aria-label attribute context and inject event-handler attributes such as onclick.
-
CVE-2026-9209
•
published on October 8, 2026
mJobTime through build 15.7.3.32 contains an unauthenticated SQL execution vulnerability in the Login.aspx admin panel handlers, where the runQueryButton postback and exportSqlQuery_Server PageMethod execute caller-supplied SQL against the backing Sybase SQL Anywhere database using DBA/sysadmin privileges with no server-side authentication enforced beyond a client-side sessionStorage flag. Attackers can submit arbitrary SQL through these exposed endpoints to invoke xp_cmdshell and xp_read_file, achieving pre-authentication remote code execution as LocalSystem via a single HTTP request.
-
CVE-2026-9191
•
published on October 12, 2026
Progress MarkLogic Server 12.x releases before 12.1.0 and 11.x releases before 11.3.7 do not sufficiently isolate user-supplied code executed through certain REST and XDBC evaluation paths from HTTP request, response, and session state. An attacker able to execute code through an affected path could perform unauthorized actions or compromise an authenticated session.
-
CVE-2026-9160
•
published on September 11, 2026
Improper neutralization of special elements used in a template engine vulnerability in Arma Digital Media Inc. Website Template allows Code Injection.
This issue affects Website Template: through 11092026. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-9317
•
published on September 4, 2026
Nango before 0.71.6 contains a missing authentication vulnerability in the runner tRPC server that allows unauthenticated attackers to execute arbitrary JavaScript code by invoking the exposed start procedure without credentials. Attackers with network access to the runner port can send requests to the unauthenticated start procedure, bypassing the unenforced RUNNER_SECRET_KEY environment variable, to achieve remote code execution within the runner process.
-
CVE-2026-9268
•
published on October 13, 2026
GitLab has remediated an issue in GitLab EE affecting all versions from 13.6 before 19.2.8, 19.3 before 19.3.5, and 19.4 before 19.4.2 that, under certain conditions, could have allowed an authenticated user with limited permissions to modify project CI/CD deployment rollback settings without proper authorization, due to insufficient access control checks.
-
CVE-2026-9232
•
published on September 19, 2026
The Easy Appointments plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.12.27 via the handle_customers_ajax. This makes it possible for authenticated attackers, with contributor-level access and above, to extract the full customer dataset from the ea_customers table, including personally identifiable information such as names, email addresses, mobile numbers, dates of birth, and physical addresses.
-
CVE-2026-9215
•
published on September 8, 2026
A cross site request forgery (CSRF) vulnerability in the listed NETGEAR models allows an attacker who can leverage social engineering techniques on a router administrator to tamper with router configuration and disrupt router operations with active assistance from the router administrator. There is no confidentiality impact due to this vulnerability.
-
CVE-2026-9186
•
published on September 4, 2026
IBM Langflow OSS 1.0.0 through 1.11.2 allows remote authenticated attackers to bypass localhost-only MCP configuration installation by spoofing X-Forwarded-For: 127.0.0.1 header, enabling arbitrary writes to IDE config files (~/.cursor/mcp.json, etc.).
-
CVE-2026-9176
•
published on September 10, 2026
IBM WebSphere Application Server 9.0, and 8.5 is vulnerable to a security bypass due to improper authentication controls. A local attacker could exploit this vulnerability to escalate privileges and gain unauthorized access to protected resources.