-
CVE-2026-99143
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Keep the predicate limit separate from program capacity
predicate_parse() adds two to nr_preds to reserve the terminal TRUE
and FALSE entries. It also uses that increased value as the limit for
parsed predicates. If the initial count is smaller than the number
actually parsed, the program can fill the allocation and subsequent
accesses can go past its end.
Keep nr_preds as the predicate limit and use a separate value for the
allocation size. This leaves space for both terminal entries and a
zeroed entry when parsing stops at the limit.
-
CVE-2026-99142
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Check operator stack capacity before pushing
predicate_parse() uses the first operator stack entry before processing
any opening parentheses. A push then increments top before writing.
The existing check still permits that write when top already points to
the last allocated entry, which can access beyond the operator stack.
Reject the push when top reaches the last allocated entry.
-
CVE-2026-99137
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
cifs: don't update i_size in cifs_do_truncate without a cached handle
If find_writable_file() returns null, cifs_file_flush will return
0 without issuing set_file_size, and the outer 'if (!rc)' block
will set i_size to 0 before telling the server to truncate. If
the cifs_open() then fails, the inode will have size 0, while
the server file is unchanged.
Move the netfs_resize_file() and cifs_setsize() into the 'if
(cfile)', so they only run after a successful set_file_size.
In the no-handle else branch, evict stale pages with
truncate_inode_pages before the O_TRUNC open to dispose of old
cache pages, and let the open response set the i_size.
-
CVE-2026-99135
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix infinite loop on discard with large tag size
When integrity_metadata handles a discard, it fills a buffer with
DISCARD_FILLER and writes it over the tags, max_blocks blocks at a
time. If the kmalloc fails, the buffer is the on-stack array
checksums_onstack and max_size is set to HASH_MAX_DIGESTSIZE. So if the
tag size is larger than HASH_MAX_DIGESTSIZE, max_blocks is zero, bi_size
is never decremented and the loop never terminates.
Fix this by using sizeof(checksums_onstack) as max_size. The array has
MAX_TAG_SIZE bytes since commit b93b6643e9b5 ("dm integrity: fix a
crash with unusually large tag size"), so max_blocks is at least 1.
-
CVE-2026-99132
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
xfs: don't hold buffer locks across sync transaction commit in xfs_sync_sb_buf
xfs_sync_sb_buf() holds sb/rtsb buffer locks across a synchronous
xfs_trans_commit(), which flushes the CIL push workqueue internally.
If shutdown occurs during the CIL push, xfs_buf_item_unpin() needs to
lock these buffers to fail them, causing a deadlock:
setlabel: holds buf lock - flush_workqueue(xfs-cil)
CIL push worker: xfs_buf_item_unpin -> xfs_buf_lock(same buf)
Remove the xfs_trans_bhold() calls so that commit releases the buffer
locks normally. After the sync commit, re-acquire the buffers via
mp->m_sb_bp / mp->m_rtsb_bp for the on-disk writeback.
-
CVE-2026-99126
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
s390/ctcm: Prevent XID null dereference
The mpc_validate_xid() function sets grp-saved_xid2->xid2_flag2 to 0x40
to signal XID validation error. If peer XID is NULL or r/w channel
pairing mismatch happens, grp->saved_xid2 is never initialized. An
attempt to set the flag in such case leads to NULL dereference.
Fix this by using the always available priv->xid->xid2_flag2 instead of
grp->saved_xid2->xid2_flag2 for validation errors.
-
CVE-2026-99123
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: validate packet source for connected sockets
virtio_transport_recv_pkt() looks up sockets first by the full source and
destination tuple, then by destination only in the bound table. The
fallback is needed for listening and connecting sockets, but sockets remain
in the bound table after connect(), so it can also return a non-listening
socket.
The fallback does not validate the source address. In TCP_SYN_SENT, a
RESPONSE from an unrelated source can transition the victim socket to
TCP_ESTABLISHED while its stored remote address remains unchanged.
Subsequent RW packets from that source are delivered through the same
destination-only fallback.
This was reproduced with capability-empty processes under different UIDs.
The attacker discovered the target tuple through unprivileged AF_VSOCK
sock_diag and caused the victim socket to read 16 attacker-chosen bytes;
the intended peer-side socket read 0 of those 16 bytes.
Add vsock_check_source() to validate the transport, source port and source
CID against the peer stored in a non-listening socket. The local transport
is the CID exception because its packets are generated internally with
VMADDR_CID_LOCAL as their source, including connections using CID aliases.
Use the helper after lock_sock() in the virtio receive path.
-
CVE-2026-99120
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Cope with the SS bit being set in #NPF exit codes
When running Hyper-V from Windows 11, KVM is seeing the SS bit set
in nested page fault error codes produced for shadowed NPT. The AMD
manual is unclear about when SS is set, including whether it can be set
when SupervisorShadowStackEn (bit 6) is not set in the MISC_CTL field
of the VMCB.
Nevertheless, the unexpected SS bit causes out of bounds accesses in
permission_fault(), seen as either WARNs or UBSAN reports:
kernel: UBSAN: array-index-out-of-bounds in arch/x86/kvm/mmu.h:225:27
kernel: index 34 is out of range for type 'u16 [16]'
(in this case, the page fault error code is 34*2=0x44, i.e. SS|U; the
report shows SS|U|W happening as well). Fix the handling of unknown
error codes by dropping SS and (with a WARN) any bits not among those
that permission_fault() expects to receive.
At the same time, given the uncertainty about when hardware sets SS,
follow the processor's behavior when constructing the fault's error
code, and preserve the SS bit as passed to FNAME(walk_addr_generic).
While the behavior is surprising, there's a possibility that Hyper-V
expects it (Hyper-V does not even enable CET unless it finds MBEC/GMET!),
so retain the information when reflecting the fault to L1 instead of
unconditionally discarding it.
Bisection shows that this started happening with commit 687ee95c1b6d ("KVM:
nSVM: enable GMET for guests"), even though SHSTK was available to guests
since Linux 6.18. However, this is not because bit 1 of MISC_CTL (GMET)
somehow enables reporting the SS bit; rather, it's simply that Hyper-V
never uses CET unless GMET is also present. The WARN is reproducible
even with gmet=0, with some hacking of kvm-unit-tests's cet.c testcase
to ensure that the first access to the shadow stack triggers a page fault.
-
CVE-2026-99119
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: actually validate userq BOs
This was supposed to loop over the individual evicted list, as the
kernel and always_valid evicted lists were already handled in
amdgpu_vm_validate.
Without this, BOs that were created and evicted before a userq was made
would never end up in an eviction fence rearm.
Also add the missing ref to the BO before drm_exec locks and refs it.
(cherry picked from commit 18decfc9e8cc0fa70b6de9944cc27a37729edfbd)
-
CVE-2026-99117
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: don't truncate the port group walk on teardown
__br_multicast_disable_port_ctx() and br_multicast_del_port() walk
port-mglist with hlist_for_each_entry_safe(). However,
br_multicast_find_del_pg() can also delete other entries from the same
list through br_multicast_fwd_src_remove() or __fwd_del_star_excl().
If such an entry is the iterator's saved next node, hlist_del_init()
clears its ->next and terminates the walk early. The reproducer triggers
this in both teardown walks, leaving port groups in the bridge mdb with
a dangling ->key.port after del_nbp() frees the port:
BUG: KASAN: slab-use-after-free in __mdb_fill_info+0x1191/0x1320
__mdb_fill_info+0x1191/0x1320
br_mdb_dump+0x594/0xe40
rtnl_mdb_dump+0x1cf/0x5d0
Use hlist_del_init_rcu() to unlink the group while preserving ->next.
br_multicast_del_pg() and the teardown walks run under
br->multicast_lock. The GC worker must acquire the same lock before
detaching the group for destruction, so the node remains alive while
the walk uses the preserved pointer.
Preserving ->next means a walk can now reach a group that an earlier
iteration already deleted as a side effect. That group is off mp->ports,
so br_multicast_find_del_pg() would fall through its port scan and hit
the trailing WARN_ON(1). Skip such groups at the top of that helper: a
port group is put on port->mglist when it is created and only unlinked
when it is deleted, so hlist_unhashed() identifies exactly this case.
-
CVE-2026-99112
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flower: validate mask pointer after nla_next()
fl_set_enc_opt() iterates the key's nested tunnel-option attributes
with nla_for_each_attr() while advancing a single mask pointer via
nla_next() at the bottom of each loop, so the mask cursor is driven
by the number of key attributes rather than by the mask's own
attributes. The nla_ok() added by commit c96adff956191 ("cls_flower:
call nla_ok() before nla_next()") only validates the mask pointer
that was just consumed; the pointer produced by nla_next() is used by
the next iteration (fl_set_geneve_opt() and siblings) without any
validation.
The mask's nested attributes are validated with NL_VALIDATE_LIBERAL,
which merely warns on trailing bytes that do not form a complete
attribute. A mask carrying one valid attribute plus 1-3 residue
bytes (or a non-aligned attribute length making msk_depth negative)
therefore reaches the next iteration with msk_depth != 0, so neither
the !msk_depth check in fl_set_enc_opt() nor the !depth check in the
per-type helpers fires. nla_type() then reads past the mask payload
and nla_parse_nested_deprecated() iterates with an nla_len taken
from those bytes, reading well beyond the mask attribute (KASAN:
slab-out-of-bounds read in __nla_validate_parse from fl_change()).
Validate the advanced mask pointer as well: when the mask is not
legitimately exhausted (msk_depth != 0) and the new pointer fails
nla_ok(), reject the filter with -EINVAL. An exactly exhausted mask
still skips the check, preserving exact-match behaviour for the
remaining key attributes.
-
CVE-2026-99111
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix data corruption with concurrent writes and O_TRUNC
cifs_do_truncate() flushes dirty pages with filemap_write_and_wait()
and truncates the file on the server, but in the old code both
operations ran without holding i_rwsem or invalidate_lock. A
concurrent buffered write via netfs_perform_write() -- which only
needs i_rwsem shared -- could dirty new pages after the flush but
before the local truncation, and those pages would be silently
discarded by cifs_setsize() - truncate_pagecache().
Fix by acquiring inode_lock (exclusive i_rwsem) and
filemap_invalidate_lock at the top of cifs_do_truncate(), so the
entire flush-truncate-resize sequence is atomic with respect to:
- buffered writes (blocked by exclusive i_rwsem, since
netfs_start_io_write takes i_rwsem shared),
- read page faults (blocked by exclusive invalidate_lock, since
filemap_fault takes it shared),
- writeback collection (blocked by netfs_wb_begin/netfs_wb_end
around the server truncate and local resize, since
netfs_writepages also acquires the wb lock).
-
CVE-2026-99107
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix incorrect MFT record pointer passed to ntfs_attr_record_resize
ntfs_new_attr_flags() passes the wrong MFT record to ntfs_attr_record_resize().
When the attribute is in an extent record, ctx-mrec points to the extent
but the function receives the base record pointer m, causing incorrect
size calculations in memmove.
Fix by passing ctx->mrec (the actual MFT record containing the attribute)
instead of m (the base MFT record) to ntfs_attr_record_resize().
-
CVE-2026-99106
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: free the userptr ranges when a CS fails after parser_bos
amdgpu_cs_parser_bos() allocates an HMM range for every userptr entry of
the BO list and looks up the user pages. Those ranges are only freed when
amdgpu_cs_parser_bos() itself fails or when amdgpu_cs_submit() checks
them under the notifier lock. If amdgpu_cs_patch_jobs(),
amdgpu_cs_vm_handling(), amdgpu_cs_sync_rings() or the early part of
amdgpu_cs_submit() fails, nothing frees them: neither
amdgpu_cs_parser_fini() nor amdgpu_bo_list_free() touch e-range.
Each such CS then leaks the range, its hmm_pfns array (8 bytes per page
of the userptr BO) and the BO reference the range holds. An IB on a ring
that patches the CS in place (e.g. VCN) with an unmapped va_start fails
in amdgpu_cs_patch_ibs() and takes this path.
Free the ranges on those error paths. Ranges amdgpu_cs_submit() already
dropped are NULL, so freeing them again is a no-op.
(cherry picked from commit c52a9542ed7cfd527feb938bd0accada2ac8d267)
-
CVE-2026-99100
•
published on October 28, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: validate firmware record lengths
The p54 firmware parser accesses component ID and component version
records without checking that their lengths cover the fields being read.
A malformed record can therefore make the parser read past the record.
Validate the component ID and component version record lengths before
accessing their data. The descriptor record is also checked against the
shortest descriptor length found in the supported firmware images.
Reject descriptor values that underflow the RX offset or produce an empty
RX range before updating the driver state.
-
CVE-2026-9040
•
published on September 8, 2026
A race condition vulnerability in Arm Ltd Bifrost GPU Kernel Driver, Arm Ltd Valhall GPU Kernel Driver, Arm Ltd Arm 5th Gen GPU Architecture Kernel Driver allows a local non-privileged user process to perform improper GPU memory processing operations to cause a denial of service or disclose sensitive information.
This issue affects Bifrost GPU Kernel Driver: from r12p0 through r49p5, from r50p0 through r51p0, from r54p1 through r54p2; Valhall GPU Kernel Driver: from r19p0 through r49p5, from r50p0 through r54p3, r55p0; Arm 5th Gen GPU Architecture Kernel Driver: from r41p0 through r49p5, from r50p0 through r54p3, r55p0.
-
CVE-2026-9036
•
published on September 3, 2026
IBM Netezza Software 11.3.0.3 through Interim Fix 002 does not validate or improperly validates TLS certificate validation, which could allow an attacker to obtain sensitive information using man in the middle techniques.
-
CVE-2026-9033
•
published on August 20, 2026
An unauthenticated attacker with network access to the captive portal service of an affected device can terminate active captive portal sessions, including forcing logout of specific users or clearing all active sessions. Affected users must re-authenticate to regain access.
Successful exploitation may allow termination of individual or all active captive portal sessions, causing temporary service disruption and requiring users to re-authenticate.
-
CVE-2026-9004
•
published on September 22, 2026
The WP-CRM System – Manage Clients and Projects plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.4.6 via the 'contact_id' parameter. This makes it possible for authenticated attackers, with contributor-level access and above, to extract full names, email addresses, phone numbers, mobile numbers, fax numbers, and physical address information of arbitrary CRM contact records by enumerating the contact_id parameter.
-
CVE-2026-99284
•
published on November 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: propagate shared-frag marker in skb_zerocopy()
skb_zerocopy() moves frag descriptors from @from into @to and takes a
reference on each frag, but it does not copy skb_shinfo(from)-flags into
skb_shinfo(to)->flags. A destination skb holding the same page-cache
backed frags as the source therefore reports skb_has_shared_frag() as
false.
That breaks the invariant relied on by later in-place writers. ESP input
checks skb_has_shared_frag() before deciding whether an uncloned
nonlinear skb can skip skb_cow_data(); with the marker lost, an skb that
skb_zerocopy() built for nfnetlink_queue or for an openvswitch upcall is
decrypted in place, letting an unprivileged user write into the page
cache of a root-owned read-only file.
Propagate SKBFL_SHARED_FRAG when frag descriptors are copied, as done for
the other frag-transfer helpers.