-
CVE-2026-98937
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
perf/core: Check kernel access when kernel callchains are requested
perf_event_open() currently gates perf_allow_kernel() only on
!attr.exclude_kernel.
However, users can still request kernel callchain collection with
attr.exclude_callchain_kernel == 0 even when attr.exclude_kernel == 1.
That still requires kernel profiling privilege, but the existing check
does not enforce it.
Update the permission check to call perf_allow_kernel() when either
kernel sampling is requested or kernel callchains are requested.
This keeps permission checks aligned with requested data and prevents
unprivileged use of kernel callchain capture.
-
CVE-2026-98933
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
usb: hub: use shorter 120ms post resume hold for SS root hubs
Holding a USB3 hub PM runtime reference for 200ms at hub resume triggers
an AMD platform issue. Users running Android adb report crashes after
adb has been polling and waking up the USB subsystem once a second for
some time. Vendors are working on a solution. Disabling USB runtime PM
is one way to prevent this issue, but it is also proven that reducing the
hold time to 120ms in resume also mitigates it. See Link for more
details.
Reducing the hold time to 120ms for the USB3 roothub is in itself a valid
change and optimization, as the current 200ms is excessive: a root hub
has no upstream suspended hub whose wake propagation needs to be
accounted for, but still need some time for USB3 link training to
complete.
Keep the 200ms hold for external hubs that commit 8f5b7e2bec1c
("usb: hub: fix detection of high tier USB3 devices behind suspended
hubs") is intended for.
-
CVE-2026-98931
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
mtd: spinand: fix NULL pointer dereference with no ECC engine
When "nand-no-ecc-engine" is set in DT, nanddev_get_ecc_engine() takes
the NAND_ECC_ENGINE_TYPE_NONE path and returns success while leaving
nand-ecc.engine NULL. The SPI-NAND code nevertheless dereferences it
unconditionally to test for a pipelined engine, so probing such a
device oopses immediately.
Rather than open-coding the test three times, add a
nand_ecc_is_pipelined() helper to the NAND core that folds the NULL
check into the integration comparison, and use it everywhere. Future
callers then cannot reintroduce the problem.
-
CVE-2026-98926
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Remove sink usage from DPMS
[Why]
stream-sink is optional and can be null, so should always be checked
before dereference. Additionally, most of its usage in DPMS sequences
is for stream->sink->link, which can be replaced with stream->link,
as the two should always be the same.
[How]
* Replace stream->sink->link in DPMS on/off
* Add assert to USB4 BW allocation where sink is required
* Avoid inconsistencies in resource access, e.g. don't repeat
stream->link after it was already saved to a local variable
* Pull out effective VPG calculation to helper getter
* Formatting fixes
-
CVE-2026-98925
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix self-redirect copied_seq double-counting
When a BPF stream_verdict program redirects an skb back to the same
socket (self-redirect with BPF_F_INGRESS), sk_psock_verdict_apply()
calls tcp_eat_skb() which advances tcp_sk-copied_seq. However, the
skb is then delivered to the socket's psock ingress queue and later
read by tcp_bpf_recvmsg_parser(), which also advances copied_seq via
the copied_from_self accounting path. This double-counting causes
copied_seq to advance by 2x the actual data length, triggering:
TCP recvmsg seq # bug 2: copied BF2E806, seq BF2E7FD, \
rcvnxt BF2E806, fl 0
WARNING: net/ipv4/tcp.c:2745 at tcp_recvmsg_locked+0x72b/0x2640
Call Trace:
tcp_recvmsg+0x10a/0x500
sock_recvmsg+0x168/0x1d0
__sys_recvfrom+0x19a/0x2a0
__x64_sys_recvfrom+0xe4/0x1f0
do_syscall_64+0xf7/0x530
entry_SYSCALL_64_after_hwframe+0x77/0x7f
cleanup rbuf bug: copied BF2E806 seq BF2E806 rcvnxt BF2E806
WARNING: net/ipv4/tcp.c:1609 at tcp_cleanup_rbuf+0xf2/0x1c0
Call Trace:
tcp_recvmsg_locked+0x8d1/0x2640
tcp_recvmsg+0x10a/0x500
sock_recvmsg+0x168/0x1d0
__sys_recvfrom+0x19a/0x2a0
__x64_sys_recvfrom+0xe4/0x1f0
do_syscall_64+0xf7/0x530
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fix this by converting self-redirect verdict to __SK_PASS at the
beginning of sk_psock_verdict_apply(). This bypasses the
__SK_REDIRECT case entirely (which calls sk_psock_eat_skb), letting
the __SK_PASS path queue the skb to the psock ingress queue. The
data is then read via tcp_bpf_recvmsg_parser(), which advances
copied_seq exactly once through copied_from_self. Cross-socket
redirects continue through __SK_REDIRECT with sk_psock_eat_skb()
unchanged.
-
CVE-2026-98923
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
arm64: io: Reject non-user protection in ioremap_prot()
Mapping a stack-top page via /dev/mem with PROT_NONE and then
reading that process's /proc/pid/cmdline triggers a spurious WARN
in ioremap_prot() through generic_access_phys():
WARNING: ./arch/arm64/include/asm/io.h:275 at generic_access_phys
Call trace:
generic_access_phys+0x1c8/0x228 (P)
__access_remote_vm+0x2b4/0x398
access_remote_vm+0x14/0x30
get_mm_cmdline+0xf8/0x2a0
proc_pid_cmdline_read+0x68/0x120
generic_access_phys() passes the protection derived from the user PTE
to ioremap_prot(). On arm64, a PROT_NONE mapping is represented by a
present-invalid PTE, so pte_present() still returns true and the
protection reaches ioremap_prot().
A PROT_NONE mapping does not have PTE_USER, causing the existing
WARN_ON_ONCE() in ioremap_prot() to fire even though this is a valid
user mapping. Execute-only mappings have the same issue and must not
be readable through this path either.
ioremap_prot() should therefore reject protection values without
PTE_USER without warning. This makes the access fail cleanly for
PROT_NONE and execute-only mappings while retaining the existing
user-protection contract.
-
CVE-2026-98922
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: emac: move setting of netops to fix crash
fixes the following crash on driver initialization:
|BUG: Kernel NULL pointer dereference on read at 0x00000158
|Faulting instruction address: 0xc0566b40
|Oops: Kernel access of bad area, sig: 11 [#1]
|BE PAGE_SIZE=4K PowerPC 44x Platform
|Modules linked in:
|CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: GW 7.3.0-rc3+ #1
|Tainted: [W]=WARN
|Hardware name: MyBook Live APM821XX 0x12c41c83 PowerPC 44x Platform
|NIP: c0566b40 LR: c05648f8 CTR: c04c1e9c
|REGS: c1053a20 TRAP: 0300 Tainted: GW (7.3.0-rc3+)
|MSR: 0002b000 CE,EE,FP,ME CR: 24008808 XER: 00000000
|DEAR: 00000158 ESR: 00000000
|GPR00: c05648f8 c1053b10 c1063600 c1030000 c5ab3000 00000000 [...]
|GPR08: 00000002 00000000 00000000 c1053b40 84002808 00000000 [...]
|GPR16: cfffd210 00000002 c0beafcc cfffc960 00000000 c1030644 [...]
|GPR24: c0beafbc c1037000 00000000 0000000a 00000000 c1030000 [...]
|NIP [c0566b40] phy_link_topo_add_phy+0x2c/0x1d0
|LR [c05648f8] phy_attach_direct+0x1a4/0x368
|Call Trace:
|[c1053b10] [c0811e04] klist_put+0x54/0xb4 (unreliable)
|[c1053b40] [c05648f8] phy_attach_direct+0x1a4/0x368
|[c1053b70] [c0564ae8] phy_connect_direct+0x2c/0x60
|[c1053b90] [c056c7a8] of_phy_connect+0x50/0x74
|[c1053bc0] [c0572a88] emac_probe+0xd50/0x119c
|[c1053c90] [c04cb770] platform_probe+0x74/0xa4
|[c1053cb0] [c04c8f08] really_probe+0x120/0x2b0
|[c1053cd0] [c04c9254] __driver_probe_device+0x1bc/0x1fc
|[c1053d00] [c04c9334] driver_probe_device+0x38/0xa8
|[c1053d30] [c04c9560] __driver_attach+0xf4/0x10c
|[c1053d50] [c04c6af8] bus_for_each_dev+0x68/0xd0
|[c1053d90] [c04c7c34] bus_add_driver+0xcc/0x1ec
|[c1053dc0] [c04c9f6c] driver_register+0xcc/0x110
|[c1053de0] [c0aa3f40] emac_init+0x1c4/0x200
This bug showed up starting with v7.3-rc1. At the NIP in
phy_link_topo_add_phy() is a netdev_need_ops_lock() check.
This was added by the following
commit ded86da4bbb7 ("net: ethtool: relax ethnl_req_get_phydev() locking assertion")
The bug shows up because at the time of_phy_connect() was called, the
netdev_ops were *not yet* determined. My fix is to move the code that
sets netdev_ops+commac.ops+ethtool_ops further up as emac_init_config()
derives that by looking at the device-tree and sets the required
dev->phy_mode accordingly.
During review, the Sashiko bot's AI stated that the commac assignment
became a dead store. Great catch! To keep the original behavior as-is,
one mentioned option "set dev->commac.ops = &emac_commac_ops only in
the non-gige case?" sounded like a great plan. So the dev->commac.ops
assignment for the non-gige-case moves into the else block.
This patch was tested on a WD MyBook Live (RGMII). the device now works again.
-
CVE-2026-98919
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: harden adjust_idledly() against divide-by-zero and overflow
adjust_idledly() has several corner-case issues flagged during review:
1. If xe_gt_clock_init() failed to recognise the crystal clock,
gt-info.timestamp_base is 0, which makes idledly_units_ps also 0.
The subsequent DIV_ROUND_CLOSEST(..., idledly_units_ps) is then a
divide-by-zero and panics the kernel.
2. The tick-to-ns conversions are done in u32:
idledly * idledly_units_ps, (maxcnt - 1) * 1000
Both overflow u32 before DIV_ROUND_CLOSEST() sees them.
3. If IDLE_WAIT_TIME reads back as 0, maxcnt evaluates to 0 and
the maxcnt - 1 clamp wraps to 0xFFFFFFFF in u32.
4. The register only stores whole ticks, so the clamped ns value has
to be converted to ticks and back. DIV_ROUND_CLOSEST() can round
that conversion up past maxcnt:
maxcnt = 640 ns, one tick = 666664 ps
clamp: maxcnt - 1 = 639 ns
ns -> ticks: 639000 / 666664 = 0.958 -> rounds to 1 tick
tick -> ns: 1 * 666664 / 1000 = 667 ns
667 ns is programmed into RING_IDLEDLY, but 667 >= maxcnt (640),
so xe_gt_WARN_ON() fires again on every subsequent init.
Return early if timestamp_base is 0 (the unknown-crystal path).
Do the conversions in u64 via the *_ULL() helpers so they cannot wrap.
Clamp with a floor (DIV_ROUND_DOWN_ULL) so the programmed delay stays
strictly below maxcnt, and guard the maxcnt == 0 case with a zero delay
while still writing RING_IDLEDLY so INHIBIT_SWITCH_UNTIL_PREEMPTED is
cleared.
v2: Drop the redundant warn on the timestamp_base == 0 path;
xe_gt_clock_init() already warns on an unrecognised crystal clock.
Keep the early return to avoid the divide-by-zero. - Vinay
v3: Field-mask the RING_IDLEDLY write with REG_FIELD_PREP(IDLE_DELAY, ...)
instead of writing the raw tick count, which could clobber
INHIBIT_SWITCH_UNTIL_PREEMPTED and reserved bits. Split the
inhibit-switch clear from the maxcnt clamp so a set inhibit bit no
longer forces a needless delay overwrite when the delay itself is
already valid. Use gt_to_xe(gt) instead of gt_to_xe(hwe->gt).
(cherry picked from commit d864065ea25e9d12897c175de9176ce46677e176)
-
CVE-2026-98911
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: fix the error path in dpaa2_switch_rx()
In case of an error in dpaa2_switch_rx(), the dpaa2_switch_free_fd()
function is called in order to free the FD. This is incorrect since the
dpaa2_switch_free_fd() is intended to be used on Tx frame descriptors,
meaning that it expects in the software annotation area of the FD data
to find a valid skb pointer on which to call dev_kfree_skb().
Fix this by extracting the dma_unmap_page() from
dpaa2_switch_build_linear_skb() directly into the dpaa2_switch_rx()
function. This allows us to directly use free_pages() in case of an
error before an SKB was created and kfree_skb() afterwards.
-
CVE-2026-98910
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Unwind debug trap enable on copy_to_user failure
If kfd_dbg_trap_enable() fails while copying runtime_info to userspace,
it had already activated the trap, set debug_trap_enabled, taken an extra
process reference, and opened the debug event file. Return -EFAULT without
unwinding that state, leaving inconsistent trap state and a refcount
imbalance that could break later DISABLE/ENABLE.
On copy_to_user failure, deactivate the trap and undo the rest of the
enable setup before returning.
-
CVE-2026-98909
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: cpsw_new: unregister devlink on port registration failure
cpsw_probe() registers devlink before registering the CPSW ports.
If cpsw_register_ports() fails, the error path only unregisters the
notifiers and then releases the lower level resources. It does not undo
the successful cpsw_register_devlink() call, leaving the devlink instance
and its parameters registered after probe has failed.
Add a devlink cleanup label for the path where devlink registration has
already succeeded, and use it when port registration fails.
-
CVE-2026-98907
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
btrfs: protect sb_write_pointer() with invalidate lock
sb_write_pointer() reads the super block from the block device page cache
using read_cache_page_gfp(). This has the same race with BLKBSZSET as the
one fixed by commit 3f29d661e568 ("btrfs: sync read disk super and set
block size").
Take the mapping invalidate lock around read_cache_page_gfp() to
serialize the read against block size changes.
-
CVE-2026-98906
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: restore RX state on reload failure
lan966x_fdma_reload() backs up rx-page_pool and rx->fdma before
reallocating the RX resources for the new MTU. If the allocation fails,
the restore path puts these fields back before restarting RX.
However, the reload path also updates rx->page_order and rx->max_mtu
before calling lan966x_fdma_rx_alloc(). These fields are not restored on
failure, so RX can be restarted with the old pages, old FDMA state and
old page pool, but with the page geometry from the failed new MTU.
This can make the XDP path advertise a frame size derived from the new
page_order while the actual RX pages still come from the old allocation.
For example, after a failed reload to a jumbo MTU, xdp_init_buff() may be
called with a frame size larger than the restored RX pages.
lan966x_fdma_rx_alloc_page_pool() also registers the newly allocated page
pool with each port's XDP RXQ before fdma_alloc_coherent() is called. If
fdma_alloc_coherent() fails, the new page pool is destroyed, but the
rollback path does not restore the per-port XDP RXQ mem model
registration either.
Save and restore rx->page_order and rx->max_mtu, and restore the old page
pool registration for each port's XDP RXQ before RX is started again.
This keeps the restored RX state consistent after a failed reload.
-
CVE-2026-98899
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: mark the rcu locked areas properly
When we bump the uref counter, there's no need to keep
the rcu lock because the referred hash table can't
disappear. Also, from the same reason in mtype_gc we
need the rcu lock and not a spinlock.
-
CVE-2026-98894
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/ras: reset CPER ring on corrupt entry size
When CPER ring overflow handling advances the read pointer, it trusts the
parsed entry size from the current ring contents. Corrupt CPER data can
produce an entry size that does not advance rptr after dword conversion
and pointer masking.
In that case the recovery loop keeps testing the same location while
holding the CPER ring mutex. This can hang the worker that is writing the
next CPER record.
Detect a no-progress rptr update and reset the CPER ring to an empty
state instead. This drops the corrupt contents and lets the writer leave
the recovery path without spinning.
-
CVE-2026-98889
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix sched scan IE sizing
Scheduled scan built the probe request before iwl_mvm_scan_fits(),
so oversized IEs could be copied into the fixed preq buffer before
length validation. Move iwl_mvm_build_scan_probe() after the fits
check.
Also advertise max_sched_scan_ie_len using iwl_mvm_max_scan_ie_len()
so userspace limits account for driver-inserted DS/TPC bytes.
-
CVE-2026-98887
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211_hwsim: reject undersized HWSIM_ATTR_TX_INFO
hwsim_tx_info_frame_received_nl() casts the HWSIM_ATTR_TX_INFO payload
to a struct hwsim_tx_rate * and unconditionally reads
IEEE80211_TX_MAX_RATES entries (8 bytes) from it. The policy only bounds
the attribute from above (NLA_BINARY .len is a maximum) and the op sets
GENL_DONT_VALIDATE_STRICT, so a short or zero-length attribute is
accepted and the loop reads past the payload.
Require the exact length in the policy, so a malformed attribute is
rejected before the handler runs.
-
CVE-2026-98886
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/gma500: return errors from Oaktrail HDMI I2C reads
xfer_read() waits for the HDMI I2C transaction to reach
I2C_TRANSACTION_DONE, but it ignores both timeout and signal returns from
wait_for_completion_interruptible_timeout(). If the interrupt never
advances the transaction state, the loop can wait forever.
Return -ETIMEDOUT when the completion wait expires, propagate interrupted
waits, and make the I2C master_xfer callback return the first transfer
error instead of reporting a successful message count.
-
CVE-2026-98884
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
mmc: core: Add validation for host-provided max_segs
The max_segs field is of type unsigned short, and if a host driver
sets an excessively large value, it may be truncated to zero. This
can cause mmc_alloc_sg() to call kmalloc_objs() with a zero size
allocation request, which leads to undefined behavior.
Under the SLUB allocator, kmalloc(0) returns a special pointer
(ZERO_SIZE_PTR). The subsequent 'if (sg)' check will evaluate to
true, and sg_init_table() will then attempt to access invalid memory,
resulting in a crash:
dwmmc_rockchip 2a310000.mmc: Successfully tuned phase to 133
mmc1: new UHS-I speed SDR104 SDHC card at address aaaa
Unable to handle kernel paging request at virtual address 0000001ffffffff0
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000102c88000
[0000001ffffffff0] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 2 UID: 0 PID: 102 Comm: kworker/2:1 Not tainted 7.0.0-rc6-next-20260331-00013-g4d93c25963c5-dirty #80 PREEMPT
Hardware name: Rockchip RK3576 EVB V10 Board (DT)
Workqueue: events_freezable mmc_rescan
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : sg_init_table+0x2c/0x50
lr : sg_init_table+0x24/0x50
sp : ffff8000837db710
x29: ffff8000837db710 x28: 000000000000c000 x27: 0000000000000300
x26: 0000000000000000 x25: 0000000000000040 x24: ffff0000c46a0000
x23: 0000000000000000 x22: ffff0000c0c73c00 x21: 0000000000000010
x20: 0000000000000010 x19: 0000000000000000 x18: 000000000000002c
x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000000
x14: 0000000000000400 x13: ffff8000837dc000 x12: 0000000000000000
x11: ffff0000c0c73ca0 x10: 0000000000000040 x9 : 459ec1f0abbdbb00
x8 : 0000001fffffffe0 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000035579 x4 : 0000000000000901 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000010
Call trace:
sg_init_table+0x2c/0x50 (P)
mmc_mq_init_request+0x64/0x90
blk_mq_alloc_map_and_rqs+0x3ac/0x480
blk_mq_alloc_set_map_and_rqs+0x98/0x1e0
blk_mq_alloc_tag_set+0x1c0/0x290
mmc_init_queue+0x120/0x370
mmc_blk_alloc_req+0x150/0x420
To prevent this, add a validation check in mmc_mq_init_request() to
detect when sg_len (derived from max_segs) is zero. If sg_len is zero,
we return an error and print an error message, allowing host driver
developers to identify and fix incorrect max_segs configuration.
This is a defensive measure that ensures the MMC core fails gracefully
when host drivers provide invalid max_segs values, rather than crashing
with a page fault.
-
CVE-2026-98882
•
published on October 23, 2026
In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Add range checks for dec_output_info
If the driver's dec_output_info contains invalid data the driver can
write in invalid memory. Add a range check for that.
This fixes this smatch error:
drivers/media/platform/chips-media/wave5/wave5-vpuapi.c:588 wave5_vpu_dec_get_output_info() error: buffer overflow 'inst-frame_buf' 64 = 127