-
CVE-2026-98365
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access
mr_check_range() validates that [iova, iova+length) falls within the
registered MR range using wraparound-prone arithmetic:
if (iova mr-ibmr.iova ||
iova + length > mr->ibmr.iova + mr->ibmr.length)
A remote peer can craft an RDMA-Write/Read RETH so that iova + length
wraps to 0 (e.g. iova=0xfffffffffffffff8, length=8), bypassing the
check. rxe_mr_iova_to_index() then computes a huge index (int idx, only
guarded by WARN_ON) and rxe_mr_copy_xarray() dereferences
mr->page_info[huge], causing an out-of-bounds read/write and a kernel
oops that is triggerable by an unauthenticated remote peer.
Rewrite the check in overflow-safe form; the first two clauses guarantee
that the subsequent subtractions do not underflow:
if (iova < mr->ibmr.iova ||
length > mr->ibmr.length ||
iova - mr->ibmr.iova > mr->ibmr.length - length)
With the fix, mr_check_range() returns -EINVAL for the crafted iova and
the responder reports REMOTE_ACCESS_ERROR instead of triggering the OOB.
-
CVE-2026-98361
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Restore HMM_PFN_WRITE check in ODP write paths
Commit 0b261d7c1cd3 ("RDMA/rxe: Break endless pagefault loop for RO
pages") dropped the access permission test from rxe_check_pagefault()
and left only HMM_PFN_VALID. A page faulted in read-only, for example
a page-cache folio behind a PROT_READ file mapping, then satisfies the
check and ODP write operations (RDMA WRITE, RDMA READ response, SEND
payload, atomics) modify it through kmap without ever breaking CoW.
An unprivileged user can register an ODP MR over such a mapping and
have incoming RDMA traffic overwrite the page cache of a file it only
holds O_RDONLY, including /etc/passwd or setuid binaries. This is the
same primitive class as Dirty COW and CVE-2022-2590.
mlx5 has the missing invariant: its ODP path sets the device write bit
only for pfns that carry HMM_PFN_WRITE. Restore it in rxe by requiring
HMM_PFN_WRITE in rxe_check_pagefault() for every operation except
RXE_PAGEFAULT_RDONLY. A write to a non-writable VMA now fails the one
fault attempt with -EPERM from hmm_vma_fault() instead of re-faulting
forever. For a writable VMA the fault breaks CoW and the write lands
in the private page.
Keep pmem flushes on the read-only check. arch_wb_cache_pmem() never
modifies memory, and the FLUSH access bits do not make the umem
writable, so classifying flushes as writes would make every flush
against a flush-only MR fail.
-
CVE-2026-98360
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: insert mcg into mcg_tree only after rxe_mcast_add() succeeds
rxe_get_mcg() publishes a newly allocated multicast group in
rxe-mcg_tree before programming the backing Ethernet multicast address
with rxe_mcast_add(), which runs outside mcg_lock. A local userspace
RDMA client reaches this path with ATTACH_MCAST on a UD QP; if
rxe_mcast_add() then returns an error (for example -ENODEV when the
backing netdev has been removed, or a propagated dev_mc_add() error),
the unwind frees the published group without removing it from the tree.
A later lookup of the same MGID dereferences the freed struct rxe_mcg
from __rxe_lookup_mcg().
Fix this by keeping the new mcg private until rxe_mcast_add() succeeds.
Split the tree publication into __rxe_publish_mcg(), call rxe_mcast_add()
before taking the tree reference, and free the still-private mcg on
failure. Because the group is never visible in mcg_tree until the
multicast address is programmed, no concurrent caller can look it up or
attach a QP to a group that is about to be torn down, so the error path
needs no conditional unwind. If another caller publishes the same MGID
while the address is being programmed, the post-add re-check under
mcg_lock finds the winner; this caller then drops its private object and
balances its own rxe_mcast_add() with rxe_mcast_del() before returning
the winner.
Reproduced by forcing the rxe_mcast_add() error return under KASAN:
without the change the next attach to the same MGID reports a
slab-use-after-free in __rxe_lookup_mcg(); with it the forced failure
returns cleanly. A no-injection attach/detach regression, including a
two-QP shared join/leave and re-attach, stays KASAN- and leak-clean.
-
CVE-2026-98357
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
IB/isert: wait for deferred control PDU completions before releasing the connection
isert_send_done() hands ISTATE_SEND_TASKMGTRSP, ISTATE_SEND_REJECT and
ISTATE_SEND_TEXTRSP completions off to isert_comp_wq and returns. The work
item then runs isert_completion_put() - isert_put_cmd(), which reads
isert_conn->conn and takes conn->cmd_lock.
Nothing orders that work item against teardown. isert_wait_conn() queues
isert_release_work, which frees isert_conn, and iscsit_close_connection()
frees the iscsit_conn right after it returns, so the queued work can run
against freed memory.
Count the deferred control PDU completions per connection and let
isert_wait_conn() wait for them before the release work is queued.
ISTATE_SEND_LOGOUTRSP is deliberately not counted: that branch runs
iscsit_logout_post_handler(), which ends up waiting for
conn->conn_wait_comp, and that completion is only sent by
iscsit_close_connection() after it has called iscsit_wait_conn().
Waiting for it here would deadlock. Its wait stays the existing
isert_wait4logout().
The splat below is from a kernel with tracing printk()s and an msleep(200)
injected into isert_do_control_comp() to widen the window:
BUG: KASAN: slab-use-after-free in isert_put_cmd+0x53d/0x620
Read of size 8 at addr ffff8881054f1038 by task kworker/u17:1/182
CPU: 0 UID: 0 PID: 182 Comm: kworker/u17:1 Tainted: G B 7.2.0-rc5-TWIDE-gb8babf08acc7 #1 PREEMPT(lazy)
Tainted: [B]=BAD_PAGE
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: isert_comp_wq isert_do_control_comp
Call Trace:
TASK>
dump_stack_lvl+0x53/0x70
print_report+0xd0/0x630
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? _raw_spin_unlock_irqrestore+0x3e/0x70
? isert_put_cmd+0x53d/0x620
kasan_report+0xce/0x100
? isert_put_cmd+0x53d/0x620
isert_put_cmd+0x53d/0x620
? isert_completion_put+0x305/0x330
? isert_do_control_comp+0x2ef/0x310
process_one_work+0x633/0x1030
? assign_work+0x11d/0x370
worker_thread+0x45b/0xd10
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x2c6/0x3b0
? recalc_sigpending+0x15c/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x36e/0x5a0
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x572/0xdd0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
Allocated by task 48:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__kmalloc_cache_noprof+0x158/0x370
isert_cma_handler+0x1e3/0x2ae0
cma_cm_event_handler+0x3e/0x240
cma_ib_req_handler+0x17d9/0x4490
cm_process_work+0x41/0x330
cm_work_handler+0x5727/0xc160
process_one_work+0x633/0x1030
worker_thread+0x45b/0xd10
kthread+0x2c6/0x3b0
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
Freed by task 184:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x121/0x380
iscsit_close_connection+0x7cf/0x1e60
iscsit_take_action_for_connection_exit+0x1b6/0x360
iscsi_target_tx_thread+0x472/0x690
kthread+0x2c6/0x3b0
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
-
CVE-2026-98345
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: check IP header size in cfg80211_classify8021d()
A frame that looks like IP can be transmitted, but be too short, so
the DS field is read incorrectly:
BUG: KMSAN: uninit-value in cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027
cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027
ieee80211_select_queue+0x37a/0x9e0 net/mac80211/wme.c:180
__ieee80211_subif_start_xmit+0x60f/0x1d90 net/mac80211/tx.c:4304
ieee80211_subif_start_xmit+0xa8/0x6d0 net/mac80211/tx.c:4538
...
packet_sendmsg+0x9173/0xa2a0 net/packet/af_packet.c:3108
Use skb_header_pointer() like the MPLS case.
-
CVE-2026-98344
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: Fix device kref underflow in dma_chan_put()
dma_chan_get() takes chan-device->ref only on the slow path:
/* no kref on fast path */
if (chan->client_count) {
__module_get(owner);
chan->client_count++;
return 0;
}
if (!try_module_get(owner))
return -ENODEV;
if (!dma_device_get(chan->device)) { // calls kref_get_unless_zero()
dma_chan_put() drops the ref unconditionally, so every fast-path
get/put pair drops one extra device reference.
The bug fires when two conditions hold together: a non-private
provider has a persistent client holding chan->client_count > 0
and another client cycles dmaengine_get()/dmaengine_put().
When the kref hits zero, the subsequent dma_find_channel() returns
NULL even though the provider module is still loaded.
Fix this by dropping device->ref only on the last put, matching the
single slow-path get.
-
CVE-2026-98342
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: wait for RCU readers before releasing dma_device
dma_issue_pending_all() walks the dma_device_list with
list_for_each_entry_rcu() under rcu_read_lock(). dma_device_release()
unlinks the device with list_del_rcu() and then calls
device-device_release() (which in many drivers, such as plx_dma.c,
directly calls kfree()).
Because there is no grace period between unlinking the device and
freeing it, concurrent RCU readers in dma_issue_pending_all() can
access the device after it has been freed.
The lockless walk originally relied on clients holding a dmaengine
reference to pin the provider module, and therefore the device, for as
long as they might traverse the list. Commit 8ad342a86359 ("dmaengine:
Add reference counting to dma_device struct") decoupled the dma_device
lifetime from the module reference, so the device can now be released
while a reader is still walking the list.
Add synchronize_rcu() before the device is freed, so RCU readers are
guaranteed to have finished. Keep it unconditional: providers that do
not implement device_release() free the device themselves once
dma_async_device_unregister() returns. This call will delay for a grace
period with dma_list_mutex held, which is safe and only teardown path is
delayed.
-
CVE-2026-98336
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't offload TC setup on AP_VLAN interfaces
AP_VLAN interfaces are purely virtual, so don't try to offload
TC setup to drivers. We can't really use the AP interface either
since we may not know it all the time, and it could technically
even change.
Just reject the TC offload so things get done in software.
-
CVE-2026-98335
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: abort chanswitch when leaving a mesh
The code in ieee80211_stop_mesh() leaves CSA active, but leaving
the mesh released the channel context, so the CSA finalize work
crashes:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000003
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
RIP: 0010:ieee80211_put_srates_elem+0x42/0x640 net/mac80211/util.c:3272
Call Trace:
ieee80211_mesh_build_beacon+0xa83/0x1b50 net/mac80211/mesh.c:1093
ieee80211_mesh_rebuild_beacon+0xc7/0x170 net/mac80211/mesh.c:1147
ieee80211_mesh_finish_csa+0x131/0x210 net/mac80211/mesh.c:1542
ieee80211_set_after_csa_beacon net/mac80211/cfg.c:4085 [inline]
__ieee80211_csa_finalize net/mac80211/cfg.c:4133 [inline]
ieee80211_csa_finalize+0x633/0x1150 net/mac80211/cfg.c:4155
cfg80211_wiphy_work+0x2ab/0x450 net/wireless/core.c:438
Abort the channel switch properly.
-
CVE-2026-98333
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reset the LED state when ifup fails
When the first interface comes up, the radio LED is turned on. This can
start the TPT trigger timer, which continues running.
But if bringing up the interface fails then the timer keeps running and
won't be stopped by anything, eventually it can be freed:
ODEBUG: free active (active state 0) object: ffff888127e12130 object type: timer_list hint: tpt_trig_timer+0x0/0x300 net/mac80211/led.c:145
WARNING: CPU: 0 PID: 5923 at lib/debugobjects.c:612 debug_print_object+0x1a2/0x2b0
debug_check_no_obj_freed+0x4b7/0x600 lib/debugobjects.c:1129
kfree+0x436/0x670 mm/slub.c:6818
ieee80211_led_exit+0x162/0x1c0 net/mac80211/led.c:210
ieee80211_unregister_hw+0x27e/0x3a0 net/mac80211/main.c:1706
rt2x00lib_remove_dev+0x55b/0x670
Undo the LED state in the error path.
-
CVE-2026-98322
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_nat: fully initialise new_addr in netmap setup
nft_nat_setup_netmap() builds the mapped address in an on-stack
union nf_inet_addr. For an IPv4 mapping it writes only the 4-byte .ip
member and the loop runs a single 32-bit iteration, but it then copies
the whole 16-byte union into range-min_addr and range->max_addr, so the
upper 12 bytes reach nf_nat_setup_info() uninitialised.
KMSAN reports an uninit-value in nf_nat_setup_info() reached from
nft_nat_eval(). The IPv6 path fills all 16 bytes and is not affected.
Zero-initialise new_addr.
-
CVE-2026-98321
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat: unregister and release hooks on error
If nf_hook_entries_insert_raw() fails, the NAT hooks get never released,
resulting in a memleak.
Postpone setting nat_proto_net-nat_hook_ops when the hooks are
registered to simplify the error path to decide whether the nat hooks
need unwinding.
-
CVE-2026-98319
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm: Fix drm_pending_vblank_event leak in error path for out_fence_ptr
When an out_fence_ptr is provided but DRM_MODE_PAGE_FLIP_EVENT is not
set, a drm_pending_vblank_event will be allocated. If later, there is an
allocation failure or another failure at setup_out_fence(), that event
will not have base.fence set and it will not be released at
complete_signaling().
Release the event and set crtc_state-event to NULL just like in the
DRM_MODE_PAGE_FLIP_EVENT case when there is a failure at
drm_event_reserve_init(). That is, prepare_signaling() releases the
event and there is nothing to be done at complete_signaling(). Use
drm_event_cancel_free() as that will also undo drm_event_reserve_init()
in case it has been called.
-
CVE-2026-98315
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
ntfs: protect runlist updates with the runlist lock
ntfs_non_resident_attr_shrink() calls runlist helpers that require the
runlist write lock, but did not hold it while freeing clusters and
truncating the runlist. Serialize those operations and the resident
conversion with the runlist lock.
ntfs_attr_map_cluster() can merge a newly allocated run before updating
mapping pairs. If the update fails, free the clusters and restore both
the in-memory runlist and on-disk mapping pairs from a saved runlist.
Mark the volume in error if either rollback step fails.
-
CVE-2026-98310
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/xe/shrinker: Take a runtime PM ref before shrinking non-system memory
__xe_shrinker_walk() walks the SYSTEM and TT LRUs without a runtime PM
reference. Shrinking a bo outside system memory invalidates its GPU
mappings, which needs the device resumed, so while it is runtime
suspended the page table zap trips an assert and the TLB invalidation
returns -ENODEV:
WARNING: drivers/gpu/drm/xe/xe_bo.c:770 at xe_bo_move_notify+0x1fc/0x450 [xe]
xe_bo_shrink+0x20f/0x2b0 [xe]
__xe_shrinker_walk+0x174/0x410 [xe]
xe_shrinker_scan+0x10c/0x1e0 [xe]
do_shrink_slab+0x176/0x7e0
drop_caches_sysctl_handler+0x9c/0xf0
Take a reference before walking a memory type other than XE_PL_SYSTEM
and stop there if it cannot be acquired. Reuse the shrinker's existing
acquire path, which resumes the device directly where reclaim allows
that and otherwise queues the PM worker for a later scan. Stop the walk
once the scan target is met, so a satisfied scan does not wake the
device. System memory is still reclaimed while the device is suspended.
Gate this on xe_device_is_l2_flush_optimized(), the same condition under
which xe_bo_trigger_rebind() issues the invalidation for a non-fault-mode
vm, so reclaim is unaffected elsewhere. The System CCS copy already has
its own reference in xe_bo_shrink().
Only a non-fault-mode vm can reach this, since a fault-mode vm requires
LR mode and that holds a runtime PM reference for the vm's lifetime.
Reproduced with igt@xe_madvise@dontneed-before-exec while the GPU is
runtime suspended.
v2: simplify needs_rpm check. (Matt)
retarget Fixes tag since the issue occurs with the non-fault-mode
path added by 4e7ebff69aed.
v3: handle this in xe_shrinker.c instead of xe_bo.c (Thomas)
v4: stop the walk once the scan target is met. (Sashiko)
v5: rebase on the freed page accounting fix. (Sashiko)
v6: reuse the shrinker acquire path so runtime pm can be resumed
directly instead of always queueing a worker. (Thomas)
v7: replace xe_pm_runtime_put() with xe_shrinker_runtime_pm_put(). (Thomas)
(cherry picked from commit 628f92b28bf4c371c10207daf6fc4caee0c0db2e)
-
CVE-2026-98309
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Use managed KMS polling to fix UAF on unbind
vc4_kms_load() calls drm_kms_helper_poll_init() but the driver provides
no matching drm_kms_helper_poll_fini(). The output poll work stays
scheduled after unbind and runs on the freed drm_device:
# modprobe vc4; rmmod vc4; sleep 10
BUG: KASAN: slab-use-after-free in delayed_work_timer_fn
BUG: KASAN: slab-use-after-free in drm_client_dev_hotplug [drm]
Workqueue: events output_poll_execute [drm_kms_helper]
Allocated by task 171: __devm_drm_dev_alloc
Freed by task 262 (rmmod): drm_dev_put / component_del
Use drmm_kms_helper_poll_init() so polling is finalized with the device,
as other drivers do.
-
CVE-2026-98307
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: cleanup arsta in ath11k_mac_peer_cleanup_all()
When mac80211 removes a sta, it calls .sta_state() which in turn calls
ath11k_mac_station_remove(). In that function we clean up both peers &
arsta related resources.
But when the firmware crashes, ath11k calls ieee80211_restart_hw(), which
assumes that all driver related resources are cleaned up beforehand. This
cleanup is supposedly done by ath11k_mac_peer_cleanup_all() but does not
in fact free arsta-rx_stats / tx_stats.
Extract the arsta cleanup from ath11k_mac_station_remove() into a
new ath11k_mac_station_cleanup() and call it from both there and
ath11k_mac_peer_cleanup_all().
This should handle kmemleaks reports like:
unreferenced object 0xffffff801ae66400 (size 1024):
comm "hostapd", pid 1306, jiffies 4295011565
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc d61c08ec):
kmemleak_alloc+0x3c/0x50
__kmalloc_cache_noprof+0x2b0/0x3e0
ath11k_mac_op_sta_state+0x1dc/0xb10
drv_sta_state+0xac/0x6f8
sta_info_insert_rcu+0x314/0x5e0
sta_info_insert+0x14/0x38
ieee80211_add_station+0x10c/0x1a0
nl80211_new_station+0x3e8/0x680
genl_family_rcv_msg_doit+0xc0/0x120
genl_rcv_msg+0x1b4/0x258
netlink_rcv_skb+0x4c/0x108
genl_rcv+0x38/0x60
netlink_unicast+0x190/0x278
netlink_sendmsg+0x15c/0x370
____sys_sendmsg+0x120/0x290
___sys_sendmsg+0x70/0xa0
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1
-
CVE-2026-98306
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
seg6: set IPSKB_L3SLAVE from IP6SKB_L3SLAVE on IPIP decapsulation
When an SRv6 packet arrives on an interface enslaved to a VRF,
vrf_ip6_rcv() sets IP6SKB_L3SLAVE in IP6CB, but decap_and_validate()
has never set IPSKB_L3SLAVE in IPCB. The bit stayed clear in the
common case, and with CONFIG_IPV6_MIP6 the leftover frag_max_size of
a reassembled outer packet could even set it, with no VRF involved.
Commit 44930446dde4 ("ipv6: seg6: clear IPv4 control block on IPIP
decapsulation") then made the unreliable bit reliably clear.
The effect of the missing flag is visible with End.DX4 when a
delivery to a local address of the node reaches the socket lookup.
For example, a UDP socket bound to the enslaved ingress interface
does not receive any of the decapsulated packets, while an unbound
socket outside the VRF does.
This contradicts Documentation/networking/vrf.rst: by default the
scope of an unbound UDP or TCP socket is limited to the default VRF.
Set IPSKB_L3SLAVE for IPv4 in decap_and_validate(), which already does
the same for IPv6. The socket lookup then matches the decapsulated
packet like any other packet received on that enslaved interface. Such
a packet matches an unbound UDP or TCP socket only when
udp_l3mdev_accept or tcp_l3mdev_accept is set.
-
CVE-2026-98301
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mst: move switchdev call outside rcu
This is a follow-up of one of sashiko's pre-existing bug reports.
br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs
while holding rcu_read_lock() which invokes the blocking switchdev
notifier chain and may sleep. Nonzero MSTI changes come from netlink
with rtnl held. Move the switchdev call before entering the rcu section and
assert that rtnl is held.
The call cannot be deferred because netlink needs its error and extack.
Also DSA reads the old bridge MST state during the callback and checks it.
A deferred callback will be late and will see the updated state.
-
CVE-2026-98298
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: mmp_pdma: fix wrong sg length in mmp_pdma_prep_slave_sg()
In mmp_pdma_prep_slave_sg(), for_each_sg() iterates the scatterlist
putting each entry into 'sg', but the entry length is read from 'sgl'
(the list head) instead of 'sg' (the current entry):
for_each_sg(sgl, sg, sg_len, i) {
addr = sg_dma_address(sg);
avail = sg_dma_len(sgl); /* should be 'sg' */
Consequently 'avail' is always the length of the first entry. For
multi-sg lists this causes out-of-bounds reads when a later entry is
shorter than the first, and silent data loss when it is longer.
Single-sg or uniformly-sized lists happen to mask the issue.