-
CVE-2026-98727
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
nvme-multipath: set BLK_FEAT_ZONED only after the zone info is known
The namespace head is marked zoned at allocation time based only on the
command set identifier. If the zone info query reports a zero zone size,
the path namespace is registered without zoned limits while the head
still advertises the zoned capability with a zone size of zero, and
reporting zones or writing to the head then shifts by ilog2(0).
Drop the zoned feature from the head allocation and let the head limits
refresh stack it in from the path namespace instead.
-
CVE-2026-98721
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: cadence: Initialize IRQ state before requesting IRQ
The Cadence NAND interrupt handler uses both the IRQ lock and completion
object. Registering the IRQ before initializing them leaves a window in
which a pending interrupt can access uninitialized synchronization state.
Initialize them before registering the handler.
-
CVE-2026-98720
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Force MSR bitmap refresh if runtime eVMCS controls are modified
Force a refresh of the vmcs02 MSR bitmap during nested VM-Enter if the
runtime eVMCS controls (pin, primary, secondary, etc.) are being updated.
If L1 isn't intercepting TPR writes, runs L2 with TPR virtualization, and
then runs the same L2 with TPR virtualization disabled, KVM will fail to
refresh msr_bitmap02 and leave TPR in passthrough mode even though TPR
virtualization is disabled. I.e. failure to refresh the bitmap lets L2 (or
L1 by proxy) read and write L0's TPR.
-
CVE-2026-98716
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Use the active VMCB's MSR bitmap when checking if MSR is intercepted
Use the MSR permission bitmap of the active VMCB instead of assuming that
KVM is always using vmcb02's bitmap when L2 is active, as KVM uses msrpm02
if and only if L1 wants to intercept MSR accesses, i.e. if and only if KVM
needs to merge msprm01 with msrpm12.
Don't bother tracking the virtual address of the bitmap that's being used,
as __va() is cheap on x86, and caching the virtual address would introduce
yet another source of potentially stale information.
-
CVE-2026-98715
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Preserve TLB control (i.e. pending TLB flush) on failed VMRUN
Don't reset the VMCB's TLB control back to "do nothing" on a failed VMRUN,
as empirical testing shows that the CPU performs the requested TLB flush if
and only if VMRUN is successful, i.e. clearing TLB control on a failed
VMRUN effectively drops a TLB flush.
Explicitly track the need to flush all ASIDs on a per-CPU basis, as the
ASID reuse condition is tied to the pCPU, not to the vCPU. As a bonus,
this also obviates the need to avoid clobbering FLUSH_ALL_ASID with
TLB_CONTROL_FLUSH_ASID, e.g. in svm_flush_tlb_asid().
Deliberately don't bother saving/restoring the "old" tlb_ctl on failure,
in quotes because it's not exactly the old tlb_ctl, it's the tlb_ctl from
after pre_svm_run(), but before updating tlb_ctl for flush_all_asids. If
VMRUN fails and TLB_CONTROL_FLUSH_ALL_ASID is forced, then the next
successful run of the VMCB *may* unnecessarily flush all ASIDs, which
strictly speaking could result in noisy neighbor issues. However, the
fact that new_asid() is already guest-triggerable, because of KVM's flawed
behavior of clearing the ASID on emulated INIT, means that a guest can
already trigger a flush of all ASIDs at roughly the same rate. And once
KVM stops clobbering the ASID on emulated INIT, *or* assigns a static ASID
to each vCPU, this flaw goes away.
-
CVE-2026-98710
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlegacy: 3945: free EEPROM data on remove
il3945_pci_probe() calls il_eeprom_init(), which allocates memory for
the EEPROM data. The probe failure paths release this allocation with
il_eeprom_free(), but the remove path does not free it after a
successful probe.
As a result, the EEPROM data is leaked when the PCI device is removed.
Free the EEPROM data in il3945_pci_remove() before releasing the
mac80211 hardware structure.
This issue was found by manual code inspection.
-
CVE-2026-98709
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: count only matching reservations in reserved switch
ieee80211_vif_use_reserved_switch() validates a replacement by counting
assigned links on ctx-replace_ctx and treating reservations too
broadly. A link can still be assigned to the old channel context while
holding a reservation that belongs to a different replacement
operation.
That can make the current replacement appear complete too early. If
another link finalizes first, the function can free the
WILL_BE_REPLACED chanctx while the unmatched link and driver still use
it, leading to a use-after-free in later beacon generation.
Require an in-place reservation to point at the current replacement
context, and require the reserved and assigned contexts to be the
matching replacement pair, before counting or moving the link.
-
CVE-2026-98706
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: drain PS delivery work during station teardown
Removing an AP or mesh station can notify the driver and wake TXQs after
the station has already been removed from the driver, and can update
num_sta_ps and the power-save queues after station cleanup has purged
them.
sta_deliver_ps_frames() tests sta-dead only before it starts delivery. A
worker that passes that test can be delayed while teardown sets sta->dead
and removes the station from the driver; when it resumes it still runs the
full delivery.
The existing cancel_work_sync() sits near the end of
__cleanup_single_sta(), after the final driver state transition and after
PS accounting and queue purging, so it drains the worker only once the
state it has to protect has already changed. Before commit d34ba2168a3c
("mac80211: don't delay station destruction") cleanup was deferred
through the same ordered workqueue as the delivery work, which kept the
two ordered.
Cancel the work after setting sta->dead and before moving the driver
state, and move the existing cancellation to the start of
__cleanup_single_sta(). The first drain closes the driver-lifetime window;
driver callbacks during the remaining state transitions can still queue
drv_deliver_wk through ieee80211_sta_block_awake(), so retain the second
drain at the start of __cleanup_single_sta(). That drain also covers
insertion failures, which reach cleanup without setting sta->dead.
-
CVE-2026-98694
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Fix KASAN reported use-after-free when request is canceled
Alan reported that when doing stress testing sometimes KASAN notices
use-after-free during control channel operation (stripped down keeping
the relevant parts):
BUG: KASAN: slab-use-after-free in tb_cfg_request_sync+0x240/0x250 [thunderbolt]
Read of size 24 at addr ffff88811067f290 by task kworker/u40:2/1760
TASK
tb_cfg_request_sync+0x240/0x250 [thunderbolt]
tb_cfg_read_raw+0x367/0x510 [thunderbolt]
tb_cfg_read+0xec/0x240 [thunderbolt]
tb_port_get_link_generation+0x258/0x420 [thunderbolt]
tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt]
tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt]
tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt]
tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt]
tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt]
process_one_work+0x675/0x1230
worker_thread+0x5e6/0xf70
kthread+0x365/0x470
ret_from_fork+0x54d/0x710
ret_from_fork_asm+0x1a/0x30
Allocated by task 1760:
__kmalloc_cache_noprof+0x1ee/0x550
tb_cfg_read_raw+0x1d3/0x510 [thunderbolt]
tb_cfg_read+0xec/0x240 [thunderbolt]
tb_port_get_link_generation+0x258/0x420 [thunderbolt]
tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt]
tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt]
tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt]
tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt]
tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt]
process_one_work+0x675/0x1230
worker_thread+0x5e6/0xf70
kthread+0x365/0x470
ret_from_fork+0x54d/0x710
ret_from_fork_asm+0x1a/0x30
Freed by task 926:
kfree+0x18f/0x4a0
tb_cfg_request_put+0xb7/0xe0 [thunderbolt]
tb_cfg_request_work+0x82/0x120 [thunderbolt]
process_one_work+0x675/0x1230
worker_thread+0x5e6/0xf70
kthread+0x365/0x470
ret_from_fork+0x54d/0x710
ret_from_fork_asm+0x1a/0x30
Second to last potentially related work creation:
__queue_work+0x575/0xd00
queue_work_on+0x77/0x80
tb_cfg_request_cancel+0xc7/0x260 [thunderbolt]
tb_cfg_request_sync+0x1f6/0x250 [thunderbolt]
tb_cfg_read_raw+0x367/0x510 [thunderbolt]
tb_cfg_read+0xec/0x240 [thunderbolt]
tb_port_get_link_generation+0x258/0x420 [thunderbolt]
tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt]
tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt]
tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt]
tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt]
tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt]
process_one_work+0x675/0x1230
worker_thread+0x5e6/0xf70
kthread+0x365/0x470
ret_from_fork+0x54d/0x710
ret_from_fork_asm+0x1a/0x30
The last stack trace is helpful because it shows that we are cancelling
a request and looking at tb_cfg_request_cancel() what might happen is
that tb_cfg_request_work() completes right before tb_cfg_request_cancel()
starts and because of this it will call schedule_work() queueing the
same work to run again. However, it is already removed from the
request_queue and reference count is dropped so when
tb_cfg_request_work() triggers again it will access memory that is
already released.
Fix this so that we first make sure a cancelled request is not handed
away from tb_cfg_request_find() or scheduled to run. Then instead of
relying on the worker to clean up the request we will do it in
tb_cfg_request_cancel() after the work is canceled from running. Make
tb_cfg_request_dequeue() release the request only if it was actually
removed from the queue.
-
CVE-2026-98685
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb: client: discard post-EOF pagecache when extending a file via clone range
cifs_remap_file_range() discarded the pagecache only for the folios
overlapping the destination region, so when a clone extends the file the
folio straddling the old EOF - which may hold data dirtied past EOF
through an mmap - was never dropped and became visible as file content
once the file was extended.
Start the discard at the smaller of fstart and the old EOF. i_size is
still old here, so nothing past the old EOF is flushed to the server.
-
CVE-2026-98678
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad4030: fix invalid oversampling_ratio validation
In ad4030_set_avg_frame_len(), the logarithm is calculated before input
validation. Passing zero or negative values leads to an undefined result
from ilog2().
Validate that the input is strictly positive prior to computing its
logarithm.
-
CVE-2026-98677
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad_sigma_delta: fix use-after-free on unbind
ad_sd_buffer_postenable() allocates sigma_delta-samples_buf with
devm_krealloc() at runtime, so its devres entry sits after all
probe-time entries of the driver. devm resources are released in
reverse allocation order, which means unbind frees samples_buf before
iio_device_unregister() disables the buffers and detaches the trigger
pollfunc. The data ready IRQ is still enabled at that point, so
ad_sd_trigger_handler() can still run and memcpy() incoming samples
into the freed samples_buf.
Fix this by preallocating the buffer in
devm_ad_sd_setup_buffer_and_trigger(), before the triggered buffer and
the IRQ are set up, so it is freed only after iio_device_unregister()
has drained the trigger handler via free_irq(). Size it for the worst
case of all sequencer slots being active; ad_sd_validate_scan_mask()
already caps the number of active channels at num_slots.
This issue was found by an in-house static analysis tool.
-
CVE-2026-98673
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
iio: adc: pac1934: check ACPI label duplication
A label duplication failure currently reaches the terminating-byte
write. Release the ACPI result and abort before accessing the missing
label; earlier labels are managed by devres.
Detected by static analysis and reviewed with AI-assisted source auditing.
-
CVE-2026-98668
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Ensure bounce buffer used for unaligned case is zeroed.
iio_push_to_buffers_with_ts_unaligned() leaks uninitialized heap memory
to userspace if the data passed in is not a multiple of 8 bytes and the
timestamp is enabled. Specify __GFP_ZERO for the devm_krealloc()
to ensure any extra space is cleared.
-
CVE-2026-98664
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis16400: fix unprotected debugfs reads
adis16400_serial_number_fops is open coded and never calls
debugfs_file_get(), so debugfs_remove_recursive() does not wait for a
read in progress and unbind frees the iio_dev underneath it.
Commit ae1d37a9bb4b ("iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE
instead of DEFINE_SIMPLE_ATTRIBUTE") converted product_id and
flash_count to DEFINE_DEBUGFS_ATTRIBUTE, which protects itself, but
moved all three files to debugfs_create_file_unsafe().
serial_number prints three registers as "%.4x-%.4x-%.4x" and
DEFINE_DEBUGFS_ATTRIBUTE() formats a single u64, so it cannot be
converted without changing what the file returns. adis16475 and
adis16550 already use debugfs_create_file() for their open coded
files. Use it here too.
-
CVE-2026-98663
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
iio: imu: adis16480: fix unprotected debugfs reads
The firmware_revision and firmware_date file operations are open coded
and never call debugfs_file_get(), which debugfs_create_file_unsafe()
requires. debugfs_remove_recursive() therefore does not wait for a read
in progress, and unbind frees the iio_dev underneath it.
Use debugfs_create_file() instead.
-
CVE-2026-98656
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
iio: trigger: cancel reenable_work before freeing trigger
iio_trigger_notify_done_atomic() defers -reenable() into
trig->reenable_work on the system workqueue, and the worker dereferences
the owning trigger through container_of(). Nothing cancels this work
before iio_trig_release() frees the trigger, so a worker armed by the
last in-flight IRQ can outlive the free and touch freed memory.
Cancel it at the top of iio_trig_release(), which every free path
reaches through the device core's final put_device().
Found by an in-house static analysis tool.
-
CVE-2026-98655
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
perf: Require kernel access for text poke events
Perf events with exclude_kernel=1 can be opened without kernel perf
access. However, exclude_kernel does not suppress text-poke sideband
records. Every PERF_RECORD_TEXT_POKE is marked PERF_RECORD_MISC_KERNEL
and contains a raw kernel instruction address.
An unprivileged task can therefore open and mmap a task-local software
event with text_poke=1. Both opening a count-only tracepoint event and
configuring UDP GRO for ESP-in-UDP cause updates to inline static calls;
the observer receives the relocated addresses of the modified instructions.
For a known kernel image, any such address reveals the runtime kernel
text base despite KASLR.
Call perf_allow_kernel() whenever attr.text_poke is set, regardless of
exclude_kernel. Events that neither monitor kernel execution nor request
text-poke records retain their existing permissions.
-
CVE-2026-98653
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix _gaccess_shadow_fault()
In some circumstances, it is possible that the page of nested guest
memory that is being shadowed is not present at all in the parent guest
gmap. dat_entry_walk() will not find any leaf entry and return with
-ENOENT, which will erroneously be propagated all the way to userspace.
Fix by manually calling gmap_link() on the memory of the nested guest
that is being shadowed if the mapping was not already present.
-
CVE-2026-98651
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Properly handle NULL pointer in dat_cond_set_storage_key()
Some callers pass NULL as oldkey. Calling page_cond_set_storage_key()
will cause that NULL pointer to get dereferenced.
Fix by checking for NULL and assigning the pointer to a dummy local
variable to avoid crashes.