-
CVE-2026-98696
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
USB: serial: fix driver deregistration order
USB serial driver modules register one driver for the USB bus and one or
more drivers for the ports on the USB serial bus.
When unloading a driver module, the USB driver must be deregistered
before the USB serial bus drivers so that I/O is stopped before
unbinding the ports to avoid use-after-free in completion handlers
accessing port data.
Note that the "new_id" attributes must first be removed to prevent new
ids from being added and triggering a probe of the USB driver after it
has been deregistered.
-
CVE-2026-98691
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Tear down inactive DP tunnels when the domain is stopped
tb_stop() only tears down DMA tunnels so a DP tunnel that is still
waiting for dprx_work to complete keeps that work queued while the
routers are removed and the control channel is stopped. The work only
stops once the DPRX timeout has passed and because it requeues itself
until then the flush_workqueue() in tb_domain_remove() won't wait for its
final run. The callback then runs against a domain that is already torn
down. A reference to that domain is kept so the completion waiting for
that domain to disappear in unbind will block until the timeout is
eventually reached.
Tear down DP tunnels that are not active yet as well which also cancels
that work. Tunnels for displays that are already alive are untouched and
keep working.
-
CVE-2026-98681
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb: client: split cifsFileInfo bitfields to avoid shared-byte RMW races
The invalidHandle, swapfile, oplock_break_cancelled, offload,
and status_file_deleted fields are stored in the same bitfield byte
in struct cifsFileInfo, but are updated in different code paths that
may run simultaneously, and are protected by different locks. Since
bitfield assignments generate byte-level read-modify-write operations,
a modification to one flag can overwrite a concurrent modification to
another flag.
To avoid these races, convert these flags from a bitfield to
separate bool fields.
-
CVE-2026-98674
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
iio: adc: adi-axi-adc: Initialize state mutex
The AXI ADC register access paths serialize transactions with st-lock,
but probe does not initialize it. Initialize the mutex before registering
the backend.
-
CVE-2026-98671
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
iio: adc: sun4i-gpadc-iio: clean up on thermal zone registration failure
If devm_thermal_of_zone_register() fails, probe returns without
unregistering the IIO map array or disabling runtime PM.
Jump to err_map to release them.
-
CVE-2026-98669
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: serialize buffer teardown with mode claims
Buffer-mode claims hold mlock to guarantee that the device remains in
buffer mode until the claim is released. Normal buffer updates take
info_exist_lock followed by mlock in iio_update_buffers().
However, iio_device_unregister() disables and deactivates all buffers
without taking mlock. This can invalidate buffer state, including
active_scan_mask, while a buffer-mode claim is held.
Take mlock in iio_disable_all_buffers() so that unregister honors the
mode-claim lifetime guarantee. The info_exist_lock - mlock ordering
matches iio_update_buffers().
-
CVE-2026-98662
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
iio: light: gp2ap020a00f: drain irq_work after free_irq
The threaded IRQ handler queues data-work through irq_work_queue() so
the trigger is polled from a per-CPU context. free_irq() does not flush
an irq_work the handler already queued, so after gp2ap020a00f_remove()
returns that work may still run and call iio_trigger_poll() on data->trig,
which the devm cleanup has already freed, causing a use-after-free.
Add irq_work_sync(&data->work) after free_irq() in remove() and in the
probe error path, mirroring commit 78601726d4a5 ("iio: trigger: sysfs:
fix use-after-free on remove").
Found by an in-house static analysis tool, confirmed by manual review.
-
CVE-2026-98652
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Add missing srcu in kvm_s390_set_irq_state()
Like kvm_s390_inject_vcpu(), kvm_s390_set_irq_state() also needs the
kvm-srcu or the slots lock when performing the Store status operation.
Fix by taking kvm->srcu in kvm_s390_set_irq_state().
-
CVE-2026-98648
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
s390/uv: Prevent potential out-of-bounds read
When the system has more than 85 secrets, the uv_secret_list struct
array only holds up to 85 items per page, resulting in an out of bounds
read in find_secret_in_page if the targeted secret is in the next page
or not stored at all.
Fix this by looping over the number of stored secrets which is the
per sub-list count of stored secrets and not the overall count.
-
CVE-2026-98632
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: Dequeue pending mesh_send_sync entries on cancel
In send_cancel(), pending mesh_tx objects are removed from the
hdev-mesh_pending list and freed via mesh_send_complete(). However, if
a mesh transmission was already queued onto hdev->cmd_sync_work_list via
mesh_next(), the queued entry retains a raw pointer to mesh_tx.
When hci_cmd_sync_work later processes the entry, it attempts to execute
mesh_send_sync and its destroy callback mesh_send_start_complete using
the already freed mesh_tx pointer, leading to a use-after-free.
Fix this by invoking hci_cmd_sync_dequeue() for mesh_send_sync on the
target mesh_tx before completing it. If the entry is found and dequeued,
its destroy callback will complete and free the object; otherwise,
mesh_send_complete() is called directly.
Additionally, ensure the transmission queue advances after cancellation
or errors. In mesh_send_start_complete(), call mesh_next() on error
unless err is -ECANCELED, because hci_cmd_sync_dequeue() holds
hdev->cmd_sync_work_lock and calling mesh_next() synchronously would
deadlock. Instead, advance the queue in send_cancel() once the lock is
released and if no transmission is in progress.
-
CVE-2026-98631
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
xsk: Use a 32-bit compare in xsk_map_gen_lookup
xsk_map_gen_lookup() loads a u32 key and compares it with max_entries
using BPF_JMP_IMM. BPF immediates are sign-extended to 64 bits, so a
max_entries value of 0x80000000 or higher becomes a threshold larger
than every zero-extended 32-bit key. An out-of-range index then skips
the bounds check and the generated lookup reads past xsk_map[].
Compare with BPF_JMP32_IMM so the check stays in 32-bit unsigned range.
-
CVE-2026-98625
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: publish HW_DEAD after worker is done
flow_offload_work_del() sets NF_FLOW_HW_DEAD before the work handler
clears NF_FLOW_HW_PENDING. Once a flow is both HW_DYING and HW_DEAD, a
concurrent garbage collection pass can remove it and schedule it for RCU
freeing.
The offload worker holds neither an RCU read lock nor a reference to the
flow. If it is preempted after publishing HW_DEAD, the RCU callback can
free the flow before the worker resumes and clears HW_PENDING, resulting
in a use-after-free.
Move HW_DEAD publication to the common worker epilogue after the pending
bit is cleared, making it the final flow access by destroy work. Order all
preceding flow accesses before publishing the bit that allows garbage
collection to free the object.
-
CVE-2026-98622
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: don't WARN on benign flow_offload_alloc() failure
flow_offload_alloc() returns NULL when the conntrack entry is dying
(e.g. raced with a conntrack flush) or when the GFP_ATOMIC allocation
fails; both are expected under load and neither is a kernel bug. This
path runs from softirq on every committed packet, so with
panic_on_warn=1 an unprivileged user can panic the box just by racing
a conntrack flush against a `tc ... action ct commit` classifier.
Reproduced with a custom repro under QEMU: a small, fixed set of UDP
flows through `tc filter ... action ct commit` on lo, raced against
threads flooding bare ctnetlink CT_DELETE (flush) requests. Hits
WARNING: net/sched/act_ct.c:437 (tcf_ct_flow_table_add(), inlined
into tcf_ct_act() in this build) within ~15s on the unpatched kernel;
same setup is clean on the patched kernel. The fix itself is
behavior-preserving: both branches already did `goto err_alloc`
before and after, only the WARN is removed.
-
CVE-2026-98621
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: gue: reject invalid REMCSUM offsets
The REMCSUM option carries an absolute checksum start and checksum field
offset. gue_remcsum() passes them to skb_remcsum_process(), whose
partial path stores offset - start in the u16 skb-csum_offset variable.
If offset is less than start, this underflows.
A forwarded packet can retain CHECKSUM_PARTIAL and reach a NETIF_F_HW_CSUM
driver which trusts the metadata, leading skb_copy_and_csum_dev() to write
two bytes about 64 KiB beyond the destination buffer.
Reject reversed tuples in validate_gue_flags(), after the existing length
validation, so all GUE parsers enforce the ordering in one place.
-
CVE-2026-98613
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Bound ownership depth through local kptrs and graph roots
Program-allocated objects can own other local objects through referenced
kptrs. bpf_obj_free_fields() follows those pointers through
__bpf_obj_drop_impl() synchronously, before the object storage is freed
through RCU. A self-referential local kptr type therefore permits arbitrarily
deep object chains, and dropping the head can exhaust the kernel stack.
Long acyclic type chains have the same problem.
btf_check_and_fixup_fields() still assumes referenced kptrs only point to
kernel types and checks ownership through list and rbtree roots only. Its
existing rule is sufficient for graph-only cycles: the target of each graph
edge must contain a node, so every type in a cycle has both a root and a
node. The rule rejects such a type owning another root, breaking every
cycle. It also limits graph-only chains to three types, or two if the first
type contains a node, and conservatively rejects longer acyclic chains.
The missing local-kptr edges, rather than a missed graph-only cycle, are the
bug introduced by support for bpf_kptr_xchg() into local kptrs.
Replace that restriction with one bounded ownership walk covering graph
roots and local referenced kptrs. Run it after all BTF records have been
fixed up, reject cycles and paths deeper than eight record-bearing types,
and cache each type's suffix depth while checking it against the remaining
budget. This also permits the longer acyclic graph-only layouts rejected
by the old rule; update their existing BTF tests accordingly.
Keep the bound independent of MAX_CALL_FRAMES because recursive destruction
can run below a BPF call chain. A plain local pointee without special-field
metadata adds only a final non-recursing drop. Non-owning kptrs and
kernel-BTF kptrs do not recurse through local records and remain outside the
walk. Include local percpu-kptr edges too, although allocation of percpu
objects with special fields is currently forbidden, so that relaxing that
restriction cannot bypass the ownership bound.
btf_check_and_fixup_fields() continues to initialize graph_root.value_rec,
including for separately allocated map records. The ownership relationships
belong to immutable program BTF and only need validation at BTF load time.
-
CVE-2026-98611
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Check params size before reading reserved fields
bpf_crypto_ctx_create() is a kfunc whose second argument is declared
with the __sz annotation, so the verifier only guarantees that
params__sz bytes of params are valid. The function nevertheless reads
params-reserved[0] and params->reserved[1] (offsets 14 and 15) before
comparing params__sz against the size of struct bpf_crypto_params, so a
BPF program can pass a shorter buffer and have the kernel read past the
region that was validated for it.
Move the size check in front of the reserved field reads.
-
CVE-2026-98610
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_hfsc: bound the classify inner-filter walk with a drift budget
hfsc_classify() applies the "filter may only point downwards" level check
only when the filter result carries no bound class. A filter created with
a flowid gets res.class set once at bind time, so the check never runs for
it during classification. hfsc_adjust_levels() can later raise a class's
level without revalidating existing bindings, leaving two binds that were
each legal at bind time pointing at each other; the classify walk then
bounces between two interior classes forever with the qdisc lock held and
BH disabled — a soft lockup from a single packet. The stuck walk trips
the watchdog:
watchdog: BUG: soft lockup - CPU#3 stuck for 13s! [ping:444]
RIP: 0010:u32_classify+0x542/0x17f0
...
tcf_classify+0x66/0xa0
hfsc_enqueue+0x166/0xdf0
Bound the traversal with a budget of non-descending hops, the only way a
configured walk can move without descending the class tree once levels
drift after bind time. The budget is cumulative over the whole walk and
is deliberately not reset on a descending hop: a chain that alternates a
descent with a lateral hop would return the budget every lap and never
trip. Descending hops never decrement it, so legitimately deep trees are
unaffected and a terminating lateral chain still classifies normally.
Drop the packet with a rate-limited warning once the budget is exhausted,
mirroring the merged HTB fix.
This is a follow-up to commit 729c4896ab82 ("net/sched: sch_htb: limit
htb_classify inner-class filter hops"), which bounded the same classify
loop on the HTB side but left the HFSC walk unbounded.
Conditions to recreate the bug:
- CONFIG_NET_SCHED, CONFIG_NET_SCH_HFSC, CONFIG_NET_CLS_U32,
CONFIG_LOCKUP_DETECTOR.
- Build a cycle with two legal-at-bind-time flowid binds and a level
drift: class X 1:1 (child of root) with leaf child 1:10; class Y 1:2
(sibling of X) with children 1:20 and 1:200; root u32 filter flowid
1:1; filter on X flowid 1:2 (legal when Y is a leaf); after Y's level
rises to 2, filter on Y flowid 1:1 (legal then). Send one packet (ping
on the device). Unfixed kernel: classify spins with the qdisc lock
held; with softlockup_panic=1 it panics.
- Reachable from unprivileged user via unshare -Urn (CAP_NET_ADMIN).
-
CVE-2026-98606
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: release the GEM object on virtio_gpu_vram_create() errors
virtio_gpu_vram_create() frees the object with a bare kfree(vram) on
both error paths after drm_gem_private_object_init() has run, and on the
second one after drm_gem_create_mmap_offset() has linked obj-vma_node
into the device's VMA offset manager. The freed object stays in that
interval tree, so a later lookup or insertion walks freed memory, and
the dma_resv and gpuva lock are never destroyed.
Call drm_gem_object_release() before kfree() on both paths.
-
CVE-2026-98605
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: samsung-dsim: fix TE GPIO lifetime for host attach
When the Exynos DSI driver was generalized into samsung-dsim, the TE
GPIO acquisition was switched from gpiod_get_optional() to
devm_gpiod_get_optional() while keeping the matching gpiod_put() calls.
That combination is wrong for a managed descriptor.
However, dropping the puts and keeping the managed get is also wrong:
samsung_dsim_register_te_irq() runs from the DSI host attach callback,
and host detach/reattach can happen without destroying the device that
owns the managed action. A second attach would then request the GPIO
again without having released it.
Switch back to a non-managed gpiod_get_optional() and keep the explicit
gpiod_put() on the request_irq() error path and in
samsung_dsim_unregister_te_irq().
[Luca: remove unnecessary comment]
-
CVE-2026-98602
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: fix out-of-bounds reads on short RX/TX frames and control fallthrough
Fix multiple out-of-bounds reads in Bluetooth BNEP frame processing:
1. In bnep_rx_frame() and bnep_ctrl_frame() (net/bluetooth/bnep/core.c),
use pskb_may_pull() to verify the BNEP header, control type byte,
filter count, and extension headers exist before reading them, and
return 0 after handling BNEP_CONTROL instead of falling through to
Ethernet frame submission when no extension headers follow.
2. In bnep_net_xmit() (net/bluetooth/bnep/netdev.c), verify skb-len >=
ETH_HLEN with pskb_may_pull() before reading the 14-byte Ethernet
header to prevent an out-of-bounds heap read and infoleak on short
AF_PACKET TX frames.