-
CVE-2026-98522
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Propagate map failures correctly from pvr_mmu_map_sgl()
Map failure from pvr_mmu_map_sgl() interface was not returned correctly
to pvr_mmu_map() interface. This resulted in pvr_mmu_map() interface to
continue instead of returning an error to caller.
Fix it by returning a proper error code from pvr_mmu_map_sgl() interface.
Call stack for crash:
[ 1179.286237] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
[ 1179.295067] Mem abort info:
[ 1179.297877] ESR = 0x0000000096000004
[ 1179.301656] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1179.306987] SET = 0, FnV = 0
[ 1179.310048] EA = 0, S1PTW = 0
[ 1179.313198] FSC = 0x04: level 0 translation fault
[ 1179.318096] Data abort info:
[ 1179.320993] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 1179.326483] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 1179.331546] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 1179.336895] user pgtable: 4k pages, 48-bit VAs, pgdp=000000009822a000
[ 1179.343402] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000
[ 1179.350243] Internal error: Oops: 0000000096000004 [#2] SMP
[ 1179.355908] Modules linked in: powervr gpu_sched drm_shmem_helper drm_gpuvm drm_exec xhci_plat_hcd xhci_hcd dwc3 usbcore usb_common snd_soc_simple_card snd_soc_simple_card_utils dwc3_am62 at24 sa2ul sha512 libsha512 sha256 authenc sch_fq_codel fuse dm_mod ipv6
[ 1179.378992] CPU: 1 UID: 1000 PID: 680 Comm: deqp-vk Tainted: G D 6.17.0 #1 PREEMPT
[ 1179.388120] Tainted: [D]=DIE
[ 1179.390994] Hardware name: Texas Instruments AM625 SK (DT)
[ 1179.396467] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1179.403415] pc : pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr]
[ 1179.410140] lr : pvr_mmu_op_context_unmap_curr_page+0x58/0x134 [powervr]
[ 1179.416848] sp : ffff8000839ab8c0
[ 1179.420153] x29: ffff8000839ab8c0 x28: 0000000000000001 x27: 000000008f386000
[ 1179.427283] x26: ffff000016d1df98 x25: 0000000000247000 x24: 00000000000001e6
[ 1179.434413] x23: 0000000000000002 x22: 000000000000ffff x21: 0000000000000247
[ 1179.441540] x20: 0000000000000245 x19: ffff000016d1df60 x18: 0000000000000002
[ 1179.448668] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001
[ 1179.455793] x14: 0000000000060810 x13: ffff80007fffffff x12: ffff000004190480
[ 1179.462921] x11: ffff8000853f7000 x10: ffff8000811ae000 x9 : ffff0000041900b8
[ 1179.470051] x8 : 0000000000000000 x7 : 00000000990c4001 x6 : 0000000000000007
[ 1179.477177] x5 : ffff000016d1df60 x4 : 0000000000000000 x3 : ffff00000a7d8000
[ 1179.484306] x2 : 00000000000001ff x1 : 0000000000000000 x0 : 0000000000000000
[ 1179.491433] Call trace:
[ 1179.493872] pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr] (P)
[ 1179.500582] pvr_mmu_map+0x31c/0x388 [powervr]
[ 1179.505027] pvr_vm_gpuva_map+0x40/0x88 [powervr]
[ 1179.509732] __drm_gpuvm_sm_map+0x250/0x44c [drm_gpuvm]
[ 1179.514952] drm_gpuvm_sm_map+0x48/0x5c [drm_gpuvm]
[ 1179.519822] pvr_vm_bind_op_exec+0x64/0x70 [powervr]
[ 1179.524785] pvr_vm_map+0x1f8/0x2a8 [powervr]
[ 1179.529142] pvr_ioctl_vm_map+0x12c/0x188 [powervr]
[ 1179.534018] drm_ioctl_kernel+0xb8/0x128
[ 1179.537941] drm_ioctl+0x21c/0x4ec
[ 1179.541337] __arm64_sys_ioctl+0xac/0x108
[ 1179.545344] invoke_syscall+0x44/0x100
[ 1179.549091] el0_svc_common.constprop.0+0x40/0xe0
[ 1179.553790] do_el0_svc+0x1c/0x28
[ 1179.557106] el0_svc+0x34/0xf0
[ 1179.560159] el0t_64_sync_handler+0xd0/0xe4
[ 1179.564334] el0t_64_sync+0x198/0x19c
[ 1179.567996] Code: 54000300 35000360 f9402261 79409a62 (f9400421)
[ 1179.574081] ---[ end trace 0000000000000000 ]---
-
CVE-2026-98520
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix use-after-free and multi-container gap in kfd_dev_mapping
kfd_dev_mapping caches the address_space of the first /dev/kfd opener
so that the GPU reset path can call unmap_mapping_range() to zap all
userspace mappings of doorbell and MMIO ranges. This design has two
bugs that both manifest under SRIOV with multiple containers:
1. Use-after-free / rwsem deadlock. The cached pointer refers to an
inode owned by the first opener's container. When that container
exits and its inode is released, kfd_dev_mapping becomes a dangling
pointer. A subsequent GPU reset dereferences it inside
unmap_mapping_range(), which takes i_mmap_rwsem on the freed inode,
causing a hard hang observable as an uninterruptible rwsem wait.
2. Multi-container gap. Only the first opener's address_space is cached;
VMAs created by later openers live in a different address_space and
are never reached by unmap_mapping_range(). After a GPU reset those
stale mappings keep doorbell and MMIO pages accessible to guest
userspace with no GPU behind them, risking PCIe transaction timeouts
and NMI panics.
Fix both bugs with the same approach used by DRM core (drm_drv.c):
create a private pseudo-filesystem at module init time and allocate one
anonymous inode from it. In kfd_open() redirect every opener's
file-f_mapping to that inode's address_space. The inode is
module-owned, lives exactly as long as the amdgpu module, and collects
VMAs from all openers in one address_space. A single
unmap_mapping_range() call in the reset path then correctly reaches
every container's mappings with no dangling pointer risk.
The hang manifests as an NMI backtrace on the GPU reset workqueue stuck
spinning in rwsem_down_read_slowpath() with a corrupted i_mmap_rwsem:
Workqueue: amdgpu-reset-dev xgpu_ai_mailbox_flr_work [amdgpu]
Call Trace:
TASK>
kvm_wait+0x1f/0x40
__pv_queued_spin_lock_slowpath+0x31d/0x3a0
_raw_spin_lock_irq+0x51/0x80
rwsem_down_read_slowpath+0xb3/0x550
down_read+0x48/0xd0
unmap_mapping_range+0x71/0x140
kfd_dev_unmap_mapping_range+0x5b/0x140 [amdgpu]
amdgpu_amdkfd_clear_kfd_mapping+0xd8/0x190 [amdgpu]
amdgpu_device_gpu_recover+0x232/0x450 [amdgpu]
xgpu_ai_mailbox_flr_work+0xb5/0xc0 [amdgpu]
process_one_work+0x18e/0x3e0
worker_thread+0x2e3/0x420
kthread+0x10a/0x230
(cherry picked from commit 1128b4a52de1572e87431de837fd9850cb99542c)
-
CVE-2026-98519
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix runtime PM leak in amdgpu_debugfs_test_ib_show()
amdgpu_debugfs_test_ib_show() resumes the device with
pm_runtime_get_sync() before taking the reset domain semaphore with
down_write_killable(). If the write lock acquisition is interrupted,
the function returns without calling pm_runtime_put_autosuspend(),
leaking the runtime PM reference acquired for the device and keeping
the GPU awake.
Drop the runtime PM reference on the interrupted down_write_killable()
error path before returning.
(cherry picked from commit ec30a576c2d4c0364549e6c04218f50704ef56c8)
-
CVE-2026-98516
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: Fix bridge reference leak in nv1a_ram_new()
pci_get_domain_bus_and_slot() takes a reference to the PCI device,
which is never released once the memory size has been read from its
config space. Drop the reference before returning.
-
CVE-2026-98512
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: RCU-free the scheduler-containing nouveau_sched
struct nouveau_sched embeds a struct drm_gpu_scheduler (base).
nouveau_sched_destroy() calls nouveau_sched_fini() (which does
drm_sched_fini(&sched-base)) and then frees the object with plain
kfree(sched).
drm_sched_fence_get_timeline_name() returns fence->sched->name, and the
scheduler fence keeps a .release callback so it is not ops-detached on
signalling. A finished fence exported to userspace via drm_syncobj /
sync_file therefore keeps pointing at &sched->base after nouveau_sched_destroy(),
and a later get_timeline_name() -- reachable unprivileged through
SYNC_IOC_FILE_INFO -- dereferences freed memory (KASAN slab-use-after-free
read).
Per the dma-fence lifetime contract the exporter must keep the data backing a
signalled fence alive for an RCU grace period. Free the scheduler-containing
object with kfree_rcu() instead of kfree().
-
CVE-2026-98510
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vm: nuke PTs only after unlinking contested VMAs
In xe_vm_close_and_put(), external-BO VMAs are queued on the contested
list for deferred destruction via xe_vma_destroy_unlocked(). However,
xe_vm_pt_destroy() was previously invoked before processing contested
VMAs, destroying vm-pt_root while those VMAs were still linked to their
respective buffer objects (vm_bo->list.gpuva).
If a concurrent thread evicts one of those shared buffer objects,
xe_bo_trigger_rebind() holding only bo->resv walks the BO's VMAs and, in
fault mode, calls xe_vm_invalidate_vma() -> xe_pt_zap_ptes(). Because
vm->pt_root[tile->id] is already NULL, dereferencing pt->level causes a
NULL ptr deref.
Fix this by deferring xe_vm_free_scratch() and xe_vm_pt_destroy() until
after all contested VMAs have been unlinked and destroyed.
User is reporting hitting a NULL ptr deref in xe_pt_zap_ptes(), which
could be explained by this race.
(cherry picked from commit c2863648959489767f08892fd6e90577d2ea0b6a)
-
CVE-2026-98509
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: fix memory leak of fence event on execbuffer failure
virtio_gpu_execbuffer_ioctl() reserves a DRM event with
drm_event_reserve_init() when VIRTGPU_EXECBUF_RING_IDX selects a ring that
userspace has enabled polling for. virtio_gpu_init_submit() does this
before the BO handles, the command buffer, the syncobj arrays and the
in-fence are processed, so every later error path runs with the event
already pending, including plain argument validation failures such as an
invalid bo_handle or an in-syncobj that carries no fence.
On those paths, virtio_gpu_cleanup_submit() drops the out-fence without
cancelling the event. The fence is freed without ever having been emitted,
taking the only driver-side pointer to the event with it. Closing the DRM
file does not help. drm_events_release() unlinks pending events but
deliberately leaves the freeing to the driver's later drm_send_event(),
which never runs for an orphaned event, so the allocation is leaked
permanently.
Found when fuzzing the virtio driver with Syzkaller:
BUG: memory leak
unreferenced object 0xffff88802c176e80 (size 96):
comm "syz.1.367", pid 10561, jiffies 4294960122
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
c8 6e 17 2c 80 88 ff ff 00 00 00 00 00 00 00 00 .n.,............
backtrace (crc e1973c6b):
kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline]
slab_post_alloc_hook mm/slub.c:4597 [inline]
slab_alloc_node mm/slub.c:4917 [inline]
__kmalloc_cache_noprof+0x49d/0x6f0 mm/slub.c:5485
_kmalloc_noprof include/linux/slab.h:988 [inline]
_kzalloc_noprof include/linux/slab.h:1309 [inline]
virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:282 [inline]
virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline]
virtio_gpu_execbuffer_ioctl+0xbbf/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505
drm_ioctl_kernel+0x1f4/0x3e0 drivers/gpu/drm/drm_ioctl.c:817
drm_ioctl+0x5f4/0xc70 drivers/gpu/drm/drm_ioctl.c:914
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fix by cancelling and freeing the DRM event on the execbuffer error path
before dropping the fence. Clear the fence's event pointer after
cancellation so it does not retain a dangling pointer.
-
CVE-2026-98506
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: do not dissolve gigantic pages without runtime support
dissolve_free_hugetlb_folio() doesn't check
hstate_is_gigantic_no_runtime(h) though remove_hugetlb_folio()/
update_and_free_hugetlb_folio() silently bail for such folios, so it frees
a still-listed folio and, on vmemmap restore failure, the
add_hugetlb_folio() rollback corrupts the free list.
-
CVE-2026-98502
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
HID: alps: unregister DualPoint Stick input device on remove
alps_input_configured() allocates a second input device ("DualPoint
Stick") with input_allocate_device() and registers it, but the
alps_driver struct has no .remove handler and input2 is not tracked in
hdev-inputs. The default remove path (hid_hw_stop -> hidinput_disconnect)
only iterates hdev->inputs, so input2 is never unregistered and leaks
on every device removal.
Add a .remove handler that stops the device first (preventing URB
callbacks from touching input2 during teardown) and then unregisters
input2.
-
CVE-2026-98496
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: airoha: npu: cancel wdt_work after releasing the WDT IRQ
airoha_npu_remove() calls cancel_work_sync() on each core's wdt_work,
but the watchdog IRQ that queues it is requested with devm_request_irq()
and is freed only after .remove() returns. airoha_npu_wdt_handler() can
therefore schedule_work() again once the cancel has returned. struct
airoha_npu, which contains the work, is devm_kzalloc()'d and is freed in
that same unwind, so the late work dereferences freed memory.
Register the work with devm_work_autocancel() before devm_request_irq()
and drop .remove(). Devres runs in reverse order, so the IRQ is freed
before cancel_work_sync(), including when probe fails. A cancel left in
.remove() cannot get that order. Initializing the work first also stops
a pending watchdog interrupt from queuing an uninitialized work item.
Probe currently calls INIT_WORK() only after devm_request_irq().
This issue was identified during our ongoing static-analysis research
while reviewing kernel code.
-
CVE-2026-98489
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: atl1c: fix soft lockup on out-of-range tpd_cons read
The hardware can report an out-of-range tpd_cons (seen as 0xffff)
while the PCIe link/MAC is resetting. An out-of-range value can
never be reached and the loop below would spin forever. To avoid
a soft lockup treat it as "nothing new to clean" instead.
Reproduced on two machines, same NIC (Qualcomm Atheros AR8151 v2.0,
4-port), triggered by rebooting a Mikrotik CCR2004 PCIe card that
the ports are directly linked to:
- Ubuntu 26.04.1 LTS, kernel 7.0.0-31-generic. The link-flap
precursor, before the lockup was captured with a full trace
elsewhere:
atl1c 0000:05:00.0 enp5s0f0: NETDEV WATCHDOG: CPU: 4: transmit queue 2 timed out 489984 ms
atl1c 0000:05:00.0: MAC state machine can't be idle since disabled for 10ms second
atl1c 0000:05:00.0: atl1c: enp5s0f0 NIC Link is Up65535 Mbps Full Duplex
65535 (0xffff) here is the same value tpd_cons reads back once the
loop below gets stuck.
- Proxmox VE, kernel 7.0.14-11-pve. Same NIC/trigger, this time
caught by the soft lockup watchdog with a full stack trace:
watchdog: BUG: soft lockup - CPU#12 stuck for 354s! [napi/eth%d-0:329]
CPU: 12 UID: 0 PID: 329 Comm: napi/eth%d-0 Tainted: P O L 7.0.14-11-pve #1 PREEMPT(lazy)
RIP: 0010:atl1c_clean_tx+0x142/0x2d0 [atl1c]
Call Trace:
__napi_poll+0x32/0x1e0
napi_threaded_poll_loop+0x286/0x2e0
napi_threaded_poll+0xfd/0x140
kthread+0xf7/0x130
ret_from_fork+0x2da/0x3a0
ret_from_fork_asm+0x1a/0x30
-
CVE-2026-98485
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_rt: fix zero-address non-strict match out-of-bounds read
rt_mt6_check() permits rules to be configured with rtinfo-addrnr == 0
even when address matching (IP6T_RT_FST_MASK) is requested.
In the IP6T_RT_FST_NSTRICT path, rt_mt6() evaluates packet routing
addresses against rtinfo->addrs[i] and terminates backwards at the bottom
of the loop:
if (ipv6_addr_equal(ap, &rtinfo->addrs[i])) {
i++;
}
if (i == rtinfo->addrnr)
break;
When addrnr is 0, if the first packet address matches rtinfo->addrs[0],
i is incremented to 1. Because i is now strictly greater than addrnr (0),
the loop termination condition (i == rtinfo->addrnr) is bypassed and will
never be satisfied.
If a crafted IPv6 packet contains matching routing addresses, i will
advance past IP6T_RT_HOPS (16). The subsequent call to ipv6_addr_equal()
reads beyond struct ip6t_rt, triggering UBSAN/KASAN out-of-bounds warnings
or kernel panics.
Fix this by:
1. Rejecting rules in rt_mt6_check() where IP6T_RT_FST_MASK is set but
rtinfo->addrnr is zero.
2. In rt_mt6(), moving the termination condition (i rtinfo->addrnr)
into the for-loop header condition and removing the backwards break
at the end of the loop body.
-
CVE-2026-98484
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: skip expired catchall elements on insert and delete
nft_setelem_catchall_insert() looks up duplicates with
nft_set_elem_active() only, while nft_set_catchall_lookup() and the
dump path additionally skip expired elements.
Once a catchall element with a timeout expires, this predicate drift
makes it invisible to userspace dumps, yet it still blocks
re-insertion: with NLM_F_EXCL the request fails with -EEXIST, and
without it the request reports success but silently inserts nothing.
The stale entry only goes away when the (user-tunable) gc interval
elapses, so the catchall rule may silently stop matching for an
arbitrarily long time after its first expiration.
The delete path shows the same drift: nft_setelem_catchall_deactivate()
picks the first active-next entry in the catchall list, so with an
expired entry still pending GC it retires the stale entry instead of
the fresh one, and it deactivates an element that userspace no longer
sees instead of failing with -ENOENT.
Align both walks with the lookup and dump predicates: only an element
that is active and not expired counts as a duplicate or delete
candidate, using the per-netns timestamp taken at transaction start,
in line with the set backend .insert/.deactivate and catchall GC sync
paths.
-
CVE-2026-98483
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
nfc: fix use-after-free in nfc_get_local_general_bytes
Commit 6709d4b7bc2e ("net: nfc: Fix use-after-free caused by
nfc_llcp_find_local") attempted to fix a use-after-free (UAF) issue by
invoking nfc_llcp_local_put(local) after accessing local-gb. However,
if the reference count drops to zero, local is freed immediately,
leading to a use-after-free when callers access the returned pointer.
Alternative approaches using dynamic allocation (e.g. kmemdup) introduced
memory leaks because callers consistently treat the returned pointer as
borrowed memory.
Fix this properly by refactoring nfc_llcp_general_bytes() and
nfc_get_local_general_bytes() to accept a caller-provided output buffer
(out_gb) and its maximum length (gb_max_len). The general bytes are
safely copied into out_gb before calling nfc_llcp_local_put(local),
ensuring safe lifetime management without ownership transfer complications.
Update all callers across drivers (microread, pn533, pn544, st21nfca,
digital_dep, and nci) to provide their own destination buffers and pass
them to nfc_get_local_general_bytes().
-
CVE-2026-98475
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
s390/cmf: Fix virtual vs physical address confusion
The measurement block address is an absolute address. Define the
associated schib_config and schib fields as dma64_t to enable automatic
detection of incorrect assignments. Also add the missing virt_to_dma64()
translation.
Without this fix, a wrong address will be used by firmware when storing
extended format channel measurement data on kernels built with
CONFIG_RANDOMIZE_IDENTITY_BASE=y.
-
CVE-2026-98470
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Don't WARN on an unknown VM ioctl in protected mode
kvm_pkvm_ioctl_allowed() WARNs when kvm_get_cap_for_kvm_ioctl() doesn't
find the ioctl number in vm_ioctl_caps[], and kvm_arch_vm_ioctl() calls
it for every number the generic code doesn't handle, so
ioctl(vm_fd, 0xdeadbeef) from userspace taints a pKVM host and panics it
under panic_on_warn. The lookup is fed userspace input: return false,
and userspace gets the -EINVAL kvm_arch_vm_ioctl() returns for that
number on a host without pKVM.
-
CVE-2026-98467
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix null ptr deref on nested wp/unmap, teardown race
Commit 7270cc9157f4 ("KVM: arm64: nv: Handle VNCR_EL2 invalidation from MMU
notifiers") introduced VNCR_EL2 invalidation in both kvm_nested_s2_unmap()
and kvm_nested_s2_wp().
However at the point of this being performed concurrent stage 2 teardown of
a nested guest can cause kvm-arch.mmu.pgt to be set to NULL.
This happens in kvm_flush_shadow_all() -> kvm_arch_flush_shadow_all() ->
kvm_free_stage2_pgd() and is performed under the kvm->mmu_lock.
Commit ec14c272408a ("KVM: arm64: nv: Unmap/flush shadow stage 2 page
tables") introduced the teardown of the entire nested MMU range, which then
invokes stage2_apply_range() with resched=true:
mmu_notifier_invalidate_range_start()
-> ... -> kvm_mmu_notifier_invalidate_range_start()
-> kvm_mmu_unmap_gfn_range()
-> kvm_unmap_gfn_range()
-> kvm_nested_s2_unmap()
-> kvm_stage2_unmap_range()
-> __unmap_stage2_range()
-> stage2_apply_range()
This means that stage2_apply_range() can drop the kvm->mmu_lock and thus
concurrent progress can be made in lockstep with
kvm_arch_flush_shadow_all().
If kvm_arch_flush_shadow_all() advances ahead of stage2_apply_range() and
completes its operation it guarantees a NULL pointer deref.
Since kvm_free_stage2_pgd() is performed under the kvm->mmu_lock this will
either be observed NULL or not and serialised against
kvm_free_stage2_pgd().
Resolve the issue by abstracting the invalidation to a new function,
kvm_invalidate_vncr_ipa_all(), and check that the pgt is non-NULL before
dereferencing it.
-
CVE-2026-98463
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Derive SCX_RQ_IN_WAKEUP from the core enqueue flags
schedule_deferred_locked() skips scheduling a deferred action while
SCX_RQ_IN_WAKEUP is set and relies on the task_woken_scx() call that follows
a wakeup enqueue to run it. enqueue_task_scx() sets the flag from the merged
enqueue flags, which include the flags stashed for a remote activation.
move_remote_task_to_local_dsq() thus sets SCX_RQ_IN_WAKEUP on the
destination rq when the moved task was woken up, although no
task_woken_scx() follows that activation.
An IMMED insert into a busy destination requests a local reenqueue during
that enqueue. The request gets linked but not scheduled and stays pending
until an unrelated wakeup or preemption on that CPU runs the deferred
actions. The IMMED task sits behind the running task in the meantime. If
nothing runs them before the scheduler is disabled, the request outlives the
scheduler and points into its freed per-cpu area, which the next scheduler
dereferences from run_deferred().
Test the core enqueue flags for the wakeup bit. Only the core's wakeup path
is followed by task_woken_scx().
-
CVE-2026-98462
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: fix CIS hold ownership on reuse
Commit 69997d50ec57 ("Bluetooth: ISO: handle bound CIS cleanup via
hci_conn") made hci_bind_cis() and hci_connect_cis() return a
connection with one hold for the ISO layer. hci_bind_cis() currently
takes that hold only after configuring a CIS, so its BT_CONNECTED and
matching BT_BOUND paths return a bare lookup result. Its configuration
failure path can likewise call hci_conn_drop() before taking a hold.
Take the hold before any state-dependent return or configuration error
so every successful return follows the documented ownership contract
and every error drop is balanced.
hci_connect_cis() also assumes hci_conn_link() always takes a new CIS
hold before dropping the one returned by hci_bind_cis(). However, the
helper returns an existing link without taking another hold. In that
case, preserve the CIS hold for the caller and drop the redundant LE
hold because the existing link already owns its parent hold. Returning
early also avoids changing an existing CIS back to BT_CONNECT.
-
CVE-2026-98461
•
published on October 18, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sock: validate event length before filtering
is_filtered_packet() reads the event code from skb-data[0] without first
checking that the skb is nonempty. When an opcode filter is configured,
it also reads the command opcode at offsets 3 or 4 without checking that
a Command Complete or Command Status event is long enough.
hci_send_to_sock() invokes the filter before hci_event_packet() validates
the event header. A malformed event supplied by a controller or a vhci
device can therefore cause an out-of-bounds read.
Keep the unmasked event code for the opcode checks. The masked value is
needed for the 64-bit event bitmap, but using it to identify command events
aliases event codes above 0x3f. In particular, Synchronous Train Complete
(0x4f) was treated as Command Status (0x0f) even though its payload has no
opcode.
Reject actual command events that are too short for the field being
inspected. A truncated command event cannot match a configured opcode.