-
CVE-2026-98407
•
published on October 14, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: fix heap OOB write on key removal
When a key is removed (data == NULL), rsi_hal_load_key() runs:
memset(&set_key[FRAME_DESC_SZ], 0, frame_len - FRAME_DESC_SZ);
set_key is a struct rsi_set_key *, so the subscript is scaled by
sizeof(struct rsi_set_key) (160 bytes): &set_key[FRAME_DESC_SZ] is
skb-data + 2560, and the memset writes 144 zero bytes starting
2.4KB past the end of the 160-byte skb data buffer, corrupting
unrelated heap objects. The intended byte offset would have been
(u8 *)set_key + FRAME_DESC_SZ.
The write fires on every DISABLE_KEY callback, so plain disconnects,
roams and interface teardowns trigger it on real networks.
The memset is redundant: the whole buffer is zeroed right after
allocation, so the frame sent to the device is byte-identical
without it. Drop the else branch; normal operation is unaffected.
Discovered by Atuin - Automated Vulnerability Discovery Engine.
-
CVE-2026-98405
•
published on October 14, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix missing iov bounds check in parse_posix_sids()
In parse_posix_sids(), sidsbuf_end is calculated using the server-supplied
out_len without being validated against the actual length of the received
iov (iov_len).
If a server provides an inflated out_len, sidsbuf_end will point past the
end of the iov. This defeats the bounds guards in posix_info_sid_size(),
allowing out-of-bounds reads into adjacent kernel memory.
Fix this by rejecting responses where the calculated sidsbuf_end would
exceed the received iov boundaries or cause pointer wraparound.
-
CVE-2026-98404
•
published on October 14, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: Fix a NULL vs ERR_PTR() bug in virtio_gpu_user_framebuffer_create()
Smatch complains that returning a NULL here will lead to a NULL pointer
dereference in drm_mode_addfb2(). Return an error pointer instead.
-
CVE-2026-98402
•
published on October 14, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: icmp: avoid invalid transport header access in icmp_send tracepoint
syzbot reported a WARNING triggered by DEBUG_NET_WARN_ON_ONCE():
WARNING: at skb_transport_header include/linux/skbuff.h:3087 [inline]
WARNING: at udp_hdr include/linux/udp.h:23 [inline]
WARNING: at do_trace_event_raw_event_icmp_send include/trace/events/icmp.h:30 [inline]
WARNING: at trace_event_raw_event_icmp_send+0x48c/0x6ec include/trace/events/icmp.h:11
Call trace:
skb_transport_header include/linux/skbuff.h:3087 [inline]
udp_hdr include/linux/udp.h:23 [inline]
do_trace_event_raw_event_icmp_send include/trace/events/icmp.h:30 [inline]
trace_event_raw_event_icmp_send+0x48c/0x6ec include/trace/events/icmp.h:11
__traceiter_icmp_send include/trace/events/icmp.h:11 [inline]
__do_trace_icmp_send include/trace/events/icmp.h:11 [inline]
trace_icmp_send+0x320/0x49c include/trace/events/icmp.h:11
__icmp_send+0xcfc/0x11d8 net/ipv4/icmp.c:1013
ipv4_send_dest_unreach net/ipv4/route.c:1280 [inline]
ipv4_link_failure+0x57c/0x8dc net/ipv4/route.c:1287
dst_link_failure include/net/dst.h:438 [inline]
vti_tunnel_xmit+0xe40/0x17a4 net/ipv4/ip_vti.c:307
TP_fast_assign() unconditionally calls udp_hdr(skb) before checking
whether the packet is UDP. Furthermore, __icmp_send() can be invoked
from paths (e.g., link failures, ARP errors, forwarding, AF_PACKET)
where skb-transport_header was never initialized (~0U).
Under CONFIG_DEBUG_NET=y, calling skb_transport_header(skb) triggers
DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb)).
Fix this by:
1. Only parsing transport info when iph->protocol == IPPROTO_UDP.
2. Using skb_header_pointer() at skb_network_offset(skb) + (iph->ihl < 2)
to safely fetch the UDP header without assuming transport_header is set.
-
CVE-2026-98393
•
published on October 14, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: ipv4: Fix UDP length overflow with PMTU discover and big MTU
This commit bounds cork-base.fragsize to IP_MAX_MTU to avoid a
possible overflow of UDP length that triggers a WARN in
udp_set_len_short when setsockopt IP_MTU_DISCOVER is set to
IP_PMTUDISC_PROBE, and a large packet is sent over a netdev with an
unusually large MTU.
Steps to reproduce:
1. Set device MTU bigger than IP_MAX_MTU + 20. cork->base.fragsize will
be set to that MTU in ip_setup_cork.
2. Set IP_MTU_DISCOVER to IP_PMTUDISC_PROBE. It lets maxnonfragsize be
set to device MTU (cork->fragsize) in __ip_append_data, rather than
to IP_MAX_MTU.
3. Send 65528 bytes of payload (+8 bytes of UDP header, +20 bytes of
IPv4 header). Device MTU allows it (it's only one byte bigger than
IP_MAX_MTU + IPv4 header, and the device MTU is bigger than that).
4. The UDP length in the built packet is 65536, which overflows the
16-bit length field and triggers the WARN in udp_set_len_short.
Note: IP_PMTUDISC_DO with IPv4 is safe, because ip_dst_mtu_maybe_forward
always clamps at IP_MAX_MTU, unlike ip6_dst_mtu_maybe_forward.
The Fixes tag points at the first commit where I could reproduce the
overflow with IPv4 and IP_PMTUDISC_PROBE.
-
CVE-2026-98392
•
published on October 14, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: fix tx_handle bounds off-by-one
Valid indices into txq-urbd0s/tfds/bufs are 0..txq->count-1, so
tfd_index == txq->count is already out of range. Change the guard in
btintel_pcie_msix_tx_handle() from '> txq->count' to '>= txq->count'.
This issue was reported by Claude Mythos.
-
CVE-2026-98391
•
published on October 14, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Guard page-fault worker with runtime PM check
During VM teardown, the VM's runtime PM reference is dropped
asynchronously, allowing the device to autosuspend while stale page
faults belonging to the now-dead VM are still queued. When the
page-fault worker later tries to ack one of these, it calls into
guc_ct_send_locked() on an already-suspended device, tripping:
Assertion `!xe_pm_runtime_suspended(xe)` failed!
WARNING at xe_device.c:1267 xe_device_assert_mem_access+0x11c/0x140 [xe]
A live VM/exec queue always holds a PM reference while it has
outstanding work, so if the device is suspended at ack time, the
owning context is already gone and the fault is stale.
Take a runtime PM reference across the entire pagefault
queue worker to safely deliver acks for torn-down VMs.
v3:
- Move PM ref to the generic xe_pagefault_queue_work using
guard(xe_pm_runtime)(xe) instead of tracking it in the GuC
backend(Matt Brost).
v2:
- Hold PM ref across the entire batch (begin/end) instead of per-ack.
This prevents the device from autosuspending mid-batch, which would
leave write_only acks written but the end flush skipped, and skip
counter++, desyncing the cadence check.(Himal)
- Add a comment explaining stale faults.(Himal)
(cherry picked from commit fcc2431d2213dc4d04250c4f1ae87d9c3ae0d455)
[Rodrigo: Added xe_device struct for compatibility while cherry-picking]
-
CVE-2026-98382
•
published on October 9, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject dev-bound-only programs on other devices
__bpf_offload_dev_match() falls back to comparing offdev pointers after an
exact netdev mismatch. Bound-only programs normally have NULL offdevs, so
unrelated netdevs compare equal. A bound-only program on an
offload-registered netdev can instead inherit a real offdev and match a
sibling port. With CAP_BPF and CAP_NET_ADMIN, a caller can use
bpf(BPF_LINK_CREATE) with a different target ifindex to run metadata kfuncs
specialized for the bound driver on the target driver's xdp_buff. Running a
veth-bound program on tun reads beyond tun's bare stack xdp_buff as a
veth_xdp_buff.
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:veth_xdp_rx_timestamp (drivers/net/veth.c:1673)
Call Trace:
...
tun_build_skb (drivers/net/tun.c:1739)
tun_get_user (drivers/net/tun.c:1856)
tun_chr_write_iter (drivers/net/tun.c:2091)
vfs_write (fs/read_write.c:595 fs/read_write.c:687)
ksys_write (fs/read_write.c:739)
do_syscall_64 (arch/x86/entry/syscall_64.c:84)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Kernel panic - not syncing: Fatal exception in interrupt
Restrict non-offloaded programs to exact netdev matches and retain the
shared-offdev fallback only for genuinely offloaded multi-port programs.
-
CVE-2026-98373
•
published on October 7, 2026
In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: preserve mremap address delta when skipping page tables
move_hugetlb_page_tables() optimizes mremap() by advancing to the last
entry in the page table when the source page table does not exist, either
initially or after unsharing a PMD table. The common loop increment then
steps to the first entry in the next page table.
However, the code advances both the source and destination addresses to
the last entries in their respective page tables, which is wrong. The
destination address must be advanced only by the same amount as the source
address.
If the source and destination offsets within their page tables differ, the
destination address can be advanced too far, causing follow-up issues.
Fix this by advancing the destination address by the source advance
distance.
With a reproducer, we were able to trigger a kernel panic on x86-64. With
this fix in place, we can no longer reproduce the issue.
-
CVE-2026-98368
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
esp: downgrade zerocopy managed frags before mutating skb frags
On the out-of-place output path (esp-inplace == false) ESP rewrites the
skb frag array: esp_output_head() appends a trailer frag and
esp_output_tail() replaces the frags with a destination page, both
referenced with get_page().
When the skb carries zerocopy managed frags (SKBFL_MANAGED_FRAG_REFS) the
payload frags are owned by the ubuf and must not be referenced or
unreferenced individually, but ESP mutates the frag array without ever
downgrading the skb. This breaks the managed-frag invariant two ways:
- esp_ssg_unref() walks the source scatterlist and drops a page
reference for every frag, including the ubuf-owned payload frags,
pushing their refcount below the GUP pin bias while the pages are
still pinned, i.e. a use-after-free of the zerocopy pages;
- esp_output_tail() installs its destination page as frag 0 with
get_page() but leaves SKBFL_MANAGED_FRAG_REFS set, so
skb_release_data() takes the skip_unref branch and never drops that
reference, leaking the x->xfrag page at packet rate.
Fix this the way every other frag-mutating site does (__ip_append_data(),
__ip6_append_data(), tcp_sendmsg_locked()) and call
skb_zcopy_downgrade_managed() before ESP touches the frag array: it takes
a real reference on each existing frag and clears SKBFL_MANAGED_FRAG_REFS,
so the per-frag unref in esp_ssg_unref() and the frag release in
skb_release_data() are both balanced and no mixed-ownership frag array is
left behind.
-
CVE-2026-98367
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Clear association under lock if siw_qp_modify fails in siw_accept
We need to clear cep before release state_lock as siw_qp_llp_close and
siw_qp_modify-siw_qp_llp_close did.
Otherwise if siw_qp_modify() fails in siw_accept(), the QP's state_lock
is released before the error path cleanup. A concurrent ibv_modify_qp()
transitioning the QP to ERROR can race in this window:
siw_accept() ibv_modify_qp(ERROR)
---------------------- ----------------------
siw_qp_modify() fails
up_write(&qp->state_lock)
down_write(&qp->state_lock)
nextstate_from_idle():
if (qp->cep)
siw_cep_put(qp->cep) - frees cep
qp->cep = NULL
goto error
cep->qp = NULL <- UAF
Clear qp->cep and drop the association reference taken by siw_cep_get(),
all under the write lock held from the initial down_write(&qp->state_lock).
Thread B therefore sees qp->cep == NULL, skips its own put, and cannot free
the cep before siw_accept() is done with it.
-
CVE-2026-98366
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: validate access flags before swapping the MR's PD
rxe_rereg_user_mr() reassigns mr-ibmr.pd first and only then
validates the IB_MR_REREG_ACCESS argument:
if (flags & IB_MR_REREG_PD) {
rxe_put(old_pd);
rxe_get(pd);
mr->ibmr.pd = ibpd;
}
if (flags & IB_MR_REREG_ACCESS) {
if (access & ~RXE_ACCESS_SUPPORTED_MR)
return ERR_PTR(-EOPNOTSUPP);
mr->access = access;
}
Both flags pass the entry check because RXE_MR_REREG_SUPPORTED is
IB_MR_REREG_PD | IB_MR_REREG_ACCESS, so a caller can reach the access
check with mr->ibmr.pd already reassigned.
mr->ibmr.pd is owned by the core, which adjusts pd->usecnt only on the
success path: ib_uverbs_rereg_mr() jumps to put_new_uobj on a driver error
without undoing the reassignment, so mr->pd == new_pd while the usecnts
still charge the MR to orig_pd. ib_dereg_mr_user() then decrements
new_pd, whose count can reach zero while a memory window still references
it; uverbs_free_pd() frees the PD on that count alone and rxe_mw_cleanup()
writes to freed memory:
BUG: KASAN: slab-use-after-free in __rxe_put+0x31/0xa0
Write of size 4 at addr ffff8881301dd690 by task rxe_poc/591
__rxe_put+0x31/0xa0
rxe_mw_cleanup+0x42/0x200
__rxe_cleanup+0x115/0x370
rxe_dealloc_mw+0x4c/0x80
Allocated by task 591:
ib_uverbs_alloc_pd+0x258/0x540
Freed by task 591:
ib_dealloc_pd_user+0x174/0x210
uverbs_free_pd+0x8d/0xc0
ib_uverbs_dealloc_pd+0x18e/0x1d0
Validate the access flags before mutating any state so the callback either
applies every requested change or none.
-
CVE-2026-98364
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
xfrm: hold net_device reference under RCU in bundle creation
xfrm_bundle_create() and xfrm_create_dummy_bundle() read dst-dev into
a local pointer without taking a device reference, then pass it to
xfrm_fill_dst(). A concurrent RTM_DELLINK replaces dst->dev via
dst_dev_put() and frees the old net_device, causing a use-after-free
when xfrm6_fill_dst() later dereferences the stale dev pointer.
BUG: KASAN: slab-use-after-free in xfrm6_fill_dst+0x82c/0x860
(net/ipv6/xfrm6_policy.c:86 netdev_hold())
Read of size 8 at addr ffff8880142fe588 by task exploit/153
Call Trace:
xfrm6_fill_dst+0x82c/0x860
xfrm_resolve_and_create_bundle+0x21d4/0x2bd0
xfrm_lookup_with_ifid+0x485/0x1640
ip6_dst_lookup_flow+0x19b/0x1e0
udpv6_sendmsg+0x1443/0x2dd0
Fix this by reading dst->dev via dst_dev_rcu() and keeping the RCU
read-side critical section active until xfrm_fill_dst() has taken the
required device references.
-
CVE-2026-98359
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Reject unregistering netdevs in ib_get_eth_speed
ib_device_get_netdev() intentionally returns a referenced net_device even
when it is unregistering, so matching and cleanup callers can still find
the association. The reference keeps struct net_device allocated, but does
not guarantee that the device remains operational.
ib_get_eth_speed() uses the returned device operationally by invoking its
ethtool callback. Although that call is made under RTNL, the function does
not verify the registration state first. An asynchronous RDMA port query
can therefore call into a netdev after NETDEV_UNREGISTER and ndo_uninit
have completed.
Check for NETREG_REGISTERED while holding RTNL and return -ENODEV for a
device which is being unregistered. Keeping RTNL across the check and the
ethtool operation prevents unregister from starting between them.
Keep the speed fallback and warning under RTNL as well, so the warning can
safely read netdev-name. Drop the netdev reference before releasing RTNL
once all accesses to the device are complete.
-
CVE-2026-98353
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Use IRQ-safe XArray helpers for QP and CQ tables
Locked QP and CQ lookups from EQ interrupts can deadlock with
create-path XArray updates. If an interrupt arrives while the create
path holds the plain xa_lock, the lookup spins forever trying to
acquire the same lock.
Use IRQ-safe XArray helpers for all QP and CQ create-path updates,
including the GSI QP store and error paths. Initialize both arrays with
XA_FLAGS_LOCK_IRQ so sleeping allocations preserve interrupt state.
-
CVE-2026-98348
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: libipw: reject too-short association responses
libipw_handle_assoc_resp() reads the capability, status and aid fields
of the 30-byte association response prefix and then computes the
information element length as
stats-len - sizeof(*frame)
stats->len is a u16 and sizeof() has type size_t, so the subtraction is
evaluated as size_t and wraps instead of going negative. Truncating
that to the u16 length parameter of libipw_parse_info_param() turns a
frame shorter than the fixed fields into a length near 64 KiB, and the
parser then reads past the receive buffer.
Both the ipw2100 and ipw2200 management receive paths reach this
function having established only that the frame carries the generic
24-byte three-address header.
Reject the frame before any fixed field is touched.
Found by an AI-assisted review of length arithmetic in management frame
parsers. Verified with a KUnit case under Generic KASAN on arm64 under
QEMU; I do not have the hardware, so it is not tested on a real device.
-
CVE-2026-98343
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel()
When dma_device_put() drops the last reference on chan-device->ref,
dma_device_release() runs and may free the dma_device along with its
channels.
dma_chan_put() then still reads chan->device->owner via
dma_chan_to_owner() for the trailing module_put(). KASAN catches it:
slab-use-after-free in dma_chan_put+0x3e6/0x4c0
Read of size 8 by task insmod/6319
Freed by task 6319:
kfree+0x225/0x470
dma_chan_put+0x395/0x4c0
dmaengine_put+0xf8/0x160
Cache the module owner in dma_chan_put() before the put so the trailing
module_put() does not need chan->device.
-
CVE-2026-98338
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: ibss: ref BSS entry for joined event
When the IBSS is joined, we only record the BSSID/channel in the event
and look up the BSS entry when processing it. However, that's racy,
e.g. a new scan with NL80211_SCAN_FLAG_FLUSH can remove it, causing a
warning in the event work:
!bss
WARNING: net/wireless/ibss.c:37 at __cfg80211_ibss_joined+0x3d3/0x440
Workqueue: cfg80211 cfg80211_event_work
cfg80211_process_wdev_events+0x39f/0x5b0 net/wireless/util.c:1144
cfg80211_process_rdev_events+0xa1/0x110 net/wireless/util.c:1179
cfg80211_event_work+0x2f/0x40 net/wireless/core.c:393
Do the lookup early (the driver is expected to only join an IBSS that
has a BSS entry) and keep a reference to it.
-
CVE-2026-98337
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't start a ROC while scanning
The ROC work can be pending when a scan starts (which requires
ROC list to be empty, but that's possible), and then a new ROC
can be added to the list and the work will pick it up.
Avoid starting that ROC if a scan made it between things, as
otherwise we'll hit a warning later:
WARNING: net/mac80211/offchannel.c:404 at ieee80211_start_next_roc+0x256/0x2d0
Workqueue: events_unbound cfg80211_wiphy_work
Call Trace:
__ieee80211_scan_completed+0x4fd/0xe40 net/mac80211/scan.c:537
ieee80211_scan_work+0x472/0x1ff0 net/mac80211/scan.c:1193
cfg80211_wiphy_work+0x410/0x570 net/wireless/core.c:513
-
CVE-2026-98331
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: unlist vifs when their netdev is unregistered
mac80211 only removes vifs from the local-interfaces list when
an interface is removed via ieee80211_if_remove(), before it
unregisters the netdev. However, it's possible for a netdev to
be unregistered without going through that: When the netns that
holds the wiphy is destroyed, the wiphy is supposed to move to
the init_ns, but that can run into allocation failures.
Then, mac80211 has an interface listed that doesn't exist, and
will eventually hit
BUG: failure at net/wireless/core.h:141/wiphy_to_rdev()!
...
_cfg80211_unregister_wdev+0x24/0x36a [cfg80211]
cfg80211_unregister_wdev+0x15/0x1d [cfg80211]
ieee80211_remove_interfaces+0x1ff/0x257 [mac80211]
ieee80211_unregister_hw+0x73/0x1d1 [mac80211]
mac80211_hwsim_del_radio+0x114/0x166 [mac80211_hwsim]
Remove the interface from the list in ->ndo_uninit if it's still
around to avoid this.