-
CVE-2026-98264
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
ALSA: virtio: reset device before deleting virtqueues
virtsnd_remove() and virtsnd_freeze() delete the virtqueues before
resetting the device. del_vqs() frees the vring backing, but does not
provide a generic device quiesce operation. In particular, modern
virtio-pci keeps enabled queues active until the device is reset.
Reset the device before deleting the virtqueues so it can no longer
access the vring memory when that memory is released. This also covers
probe failures after DRIVER_OK, which unwind through virtsnd_remove().
-
CVE-2026-98251
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
openvswitch: avoid reallocating confirmed conntrack labels
ovs_ct_get_conn_labels() adds the labels extension when a conntrack
entry does not have one. Confirmed conntracks can be read locklessly,
so adding an extension may reallocate and free the extension block
while another CPU accesses it.
Only add the extension for unconfirmed conntracks. A confirmed
conntrack without labels now fails the caller's label operation instead
of reallocating its extension storage.
-
CVE-2026-98247
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_codec: validate vendor codec count length
The Read Local Supported Codecs parsers consume the variable-sized
standard codec array before parsing the vendor codec count. Although the
initial reply-size check includes a vendor count byte in the fixed layout,
it does not guarantee that the byte remains after the standard codec array.
If a controller reply ends immediately after that array, calculating the
vendor codec array size reads vnd_codecs-num beyond the skb data. Use
skb_pull_data() to validate and consume each codec header before using its
count in both command variants.
-
CVE-2026-98246
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Serialize local codec list cleanup
hci_dev_close_sync() clears hdev-local_codecs after releasing hdev->lock.
Codec list additions and both traversals in sco_sock_getsockopt() use that
lock, but the close path does not. A close and BT_CODEC query can therefore
interleave as follows:
hci_dev_close_sync() sco_sock_getsockopt()
hci_dev_lock()
fetch codec entry
hci_codec_list_clear()
kfree(entry)
read entry->id
The reader then accesses an entry which the close path has freed. KASAN
BUG: KASAN: slab-use-after-free in sco_sock_getsockopt+0xfa0/0xfe0
Read of size 1 at addr ffff8881001c3450
Call Trace:
sco_sock_getsockopt+0xfa0/0xfe0
do_sock_getsockopt+0x537/0x7b0
__sys_getsockopt+0xf2/0x170
Allocated by task 92:
hci_codec_list_add.isra.0+0x2c/0x440
hci_read_codec_capabilities+0x224/0x590
hci_read_supported_codecs+0x2c2/0x640
Freed by task 92:
kfree+0x131/0x3c0
hci_codec_list_clear+0xd8/0x160
hci_dev_close_sync+0x92a/0xfa0
Take hdev->lock around the clear operation at its existing point in the
close path. This makes the clear wait for active readers and prevents a new
traversal until the list is empty without changing teardown ordering.
-
CVE-2026-98239
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: lan743x: fix RX checksum use-after-free
lan743x_rx_process_buffer() adds each non-first receive buffer to the
head skb's frag_list. On the last descriptor, lan743x_rx_trim_skb()
linearizes the head and frees the fragment skb metadata.
The checksum-success path then writes ip_summed through the local skb
pointer, which still points to the final fragment. This causes a
use-after-free write when a packet spans more than one receive buffer.
Set ip_summed on the surviving head skb instead. Multi-buffer receive
can occur after a live MTU increase because existing ring entries keep
their old buffer size until they are replenished.
A KUnit test invoking lan743x_rx_process_buffer() with a two-buffer
packet produced a one-byte KASAN use-after-free write before this change.
The same test passed after the change. The driver object also builds
with W=1. This was not tested on physical LAN743x hardware.
-
CVE-2026-98236
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: wwan: mhi_wwan_mbim: check skb_copy_bits() return value
mhi_mbim_rx() ignores the return value of skb_copy_bits() when it
copies each datagram out of the NTB. The datagram offset and length
come from the DPE, which is only checked to lie within the NTB
itself, so a modem can point a datagram outside the received skb.
The copy then fails and the freshly allocated skbn is passed to
netif_rx() with its uninitialized contents still in place, leaking
kernel heap memory into the network stack.
Free the skb and account an error when the copy fails.
Verified in a QEMU guest with a fault injector pointing a DPE
outside the received NTB: the copy fails, and the unpatched driver
hands the uninitialized skbn to the network stack (observed as
"unknown protocol" on bytes that were never written). With this
check the failed datagram is dropped and counted as an rx error.
Changes in v2: factor the free-and-count sequence out into
mhi_mbim_rx_drop(), shared with the unknown-protocol path, as
suggested by Loic Poulain.
-
CVE-2026-98233
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/packet: clear RX owner on VNET header error
Commit 61fad6816fc1 ("net/packet: tpacket_rcv: avoid a producer race
condition") added rx_owner_map and made tpacket_rcv() claim a V1 or V2
ring slot before converting the virtio-net header. If the conversion
fails, the drop path leaves the slot claimed.
With a one-frame TPACKET_V2 ring, an unsupported UDP GSO packet leaves
the only slot unavailable, so the ring also drops the next valid packet.
Clear the ownership bit on this error path. TPACKET_V3 already clears
its block state here.
-
CVE-2026-98232
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Validate MODE SENSE lengths in scsi_cdl_enable()
scsi_cdl_enable() uses length fields returned by MODE SENSE to locate
the ATA feature mode page in a 64-byte stack buffer. A target can report
a total length shorter than its mode header and block descriptors. The
unsigned subtraction used for the MODE SELECT length can wrap, and the
separately computed buf_data can point beyond buf.
During automatic scan, enable is false, so the read-modify-write of
buf_data[4] can clear the low two bits of a target-selected
out-of-bounds stack byte. scsi_mode_select() can then copy up to 64
bytes from outside the buffer into the outgoing MODE SELECT payload,
disclosing stack contents to the target.
This is reachable while scanning a USB storage device that identifies as
an ATA device and advertises CDL support. No filesystem mount or
userspace access to the block device is required.
On upstream commit cee9395acd80 ("Linux 7.3-rc1"), a build-specific,
one-vCPU QEMU/Raw Gadget proof using QEMU-only multi-UDC allocator
sampling executed a fixed proof command inside the guest and created a
UID-0-owned marker during automatic enumeration, with KASLR and NX
enabled.
The issue was independently found during security research at Drivesec
S.r.l.
Cap the available length to the buffer size. Validate and consume the
mode header and block descriptor lengths before using the page, and
require the five bytes needed to access the CDL field.
-
CVE-2026-98230
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
xfrm: use hlist_del_init_rcu for state_cache and state_cache_input
Commit 14acf9652e56 ("xfrm: defensively unhash xfrm_state lists in
__xfrm_state_delete") converted bydst/bysrc/byseq/byspi from
hlist_del_rcu() to hlist_del_init_rcu() so that a second
__xfrm_state_delete() on the same object becomes a no-op rather than a
write through LIST_POISON pprev. It missed state_cache and
state_cache_input, which kept hlist_del_rcu():
- hlist_del_rcu() leaves pprev = LIST_POISON2 (non-NULL), so
hlist_unhashed() returns false.
- hlist_del_init_rcu() leaves pprev = NULL, so hlist_unhashed()
returns true.
A second __xfrm_state_delete() therefore enters __hlist_del() on the
already-deleted state_cache/state_cache_input nodes and does
WRITE_ONCE(*pprev, next) through LIST_POISON2 — a write use-after-free
once the slab is reused. The corruption can in turn cause a subsequent
hlist_for_each_entry_rcu traversal to follow a dangling next pointer,
producing the read use-after-free reported in xfrm_input_state_lookup().
Switch state_cache and state_cache_input to hlist_del_init_rcu() to
match the other four lists, closing the write use-after-free and, with
it, the read use-after-free it spawns.
-
CVE-2026-98228
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
mips: select CONFIG_WEAK_REORDERING_BEYOND_LLSC from CONFIG_EYEQ
On I6500 CPU cores, lld and scd give no ordering guarantees (same as all
other instructions). To respect the assumption that arch_cmpxchg() is
fully ordered, we must inject sync instructions above and below our
lld/scd loops using the already in place WEAK_REORDERING_BEYOND_LLSC
infrastructure.
Otherwise, bad things can happen:
[ 34.054496] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000000, epc == a80000080838e01c, ra == a80000080838dfc4
[ 34.054559] Oops[#1]:
[ 34.069561] CPU: 3 UID: 0 PID: 170 Comm: pipe_race Not tainted 7.2.0-rc6-01553-gb73c35220968-dirty #103 VOLUNTARY
[ 34.079932] Hardware name: Mobile EyeQ5 MP5 Evaluation board
[ 34.085592] $ 0 : 0000000000000000 0000000000000001 0000000000000000 0000000000000000
[ 34.093616] $ 4 : a800000808ee2618 000000000b7a879d 0000000000001000 0000000000000000
[ 34.101638] $ 8 : 0000000000e3f2c9 0000000000000000 a800000808a2a9f8 0000000000000000
[ 34.109660] $12 : a8000008139ffcd8 ffffffff84080018 a80000080837fae0 7878787878787878
[ 34.117682] $16 : a800000807e82940 0000000000001000 0000000000000000 0000000000000000
[ 34.125704] $20 : a800000802920e00 a8000008139ffdf8 a800000802649400 0000000000e3f2c9
[ 34.133726] $24 : 0000000000000006 00000001200406e0
[ 34.141783] $28 : a8000008139fc000 a8000008139ffd10 0000000000e3f2c8 a80000080838dfc4
[ 34.149837] epc : a80000080838e01c anon_pipe_read+0xd4/0x428
[ 34.155697] ra : a80000080838dfc4 anon_pipe_read+0x7c/0x428
[ 34.161549] Status: 140000e3 KX SX UX KERNEL EXL IE
[ 34.166551] Cause : 40800408 (ExcCode 02)
[ 34.170574] BadVA : 0000000000000000
[ 34.174161] PrId : 0001b028 (MIPS I6500)
[ 34.178183] Process pipe_race (pid: 170, threadinfo=000000005ca35720, task=00000000e1013890, tls=000000014ebbb780)
[ 34.188568] Stack : a800000802649400 0000000000000000 0000000000000000 a8000008139ffdd0
[ 34.196623] 0000000000000fba a800000808ee0000 0000000000000001 a8000008130c3e80
[ 34.204676] a8000008080d1280 a8000008139ffd58 a8000008139ffd58 1dbd2b22ea1dd500
[ 34.212729] a800000802649400 a800000808ee0000 ffffffffffffffea 0000000000000001
[ 34.220783] 0000000000001000 0000000000000000 00000001200ae518 ffffffffffffffff
[ 34.228836] 000000fffbe0e530 a80000080837edf4 000000fffbe0e530 0000000000000000
[ 34.236890] 0000000000000000 0000000000000000 000000014ebb55a0 0000000000001000
[ 34.244943] 0000000000000001 a800000802649400 0000000000000000 0000000000000000
[ 34.252996] 0000000000000000 0000400400000000 0000000000000000 1dbd2b22ea1dd500
[ 34.261049] 00000000140000e3 a800000802649400 a800000802649400 a800000808ee0000
[ 34.269103] ...
[ 34.271568] Call Trace:
[ 34.274026] [a80000080838e01c] anon_pipe_read+0xd4/0x428
[ 34.279533] [] vfs_read+0x25c/0x318
[ 34.284607] [] ksys_read+0x104/0x138
[ 34.289763] [] syscall_common+0x44/0x68
[ 34.295187]
[ 34.296689] Code: f84000cf 02209825 de020010 d8400004 02002825 0040f809 02802025 f84000c3
[ 34.306504]
[ 34.308099] ---[ end trace 0000000000000000 ]---
My initial reproducer was the xdp-tools test suite. A standalone
reproducer would be an lld/scd loop that, when the read is reordered by
the CPU, triggers a fault. We can achieve this from userspace by
stressing an anonymous pipe, which uses a mutex. Program used:
// SPDX-License-Identifier: GPL-2.0
// pipe_race.c - reproducer for MIPS LL/SC reordering vs fs/pipe.c
//
// Two userspace processes on an anonymous pipe:
// parent = writer: tight write() loop
// child = reader: tight read() loop
#define _GNU_SOURCE
#include
#include
#include
#include
#include
#include
#include
#include
#include
---truncated---
-
CVE-2026-98223
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
mm: filemap: retain mapped dropbehind folios
Fault-around can map ready dropbehind folios without going through the
normal page-cache lookup that clears dropbehind. A mapping represents a
competing cached user, so retain the folio instead of forcibly unmapping
it when writeback completes.
For a mapped folio, folio_unmap_invalidate() can call
unmap_mapping_folio(), which takes i_mmap_rwsem and may sleep. Retaining
mapped folios avoids this path when folio_end_dropbehind() runs in
non-preemptible task context.
Tal was able to trigger a sleeping-in-atomic warning due to this [1].
Unmapped dropbehind folios continue through the existing invalidation path.
-
CVE-2026-98221
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Fix tpm2_load_cmd() boundary check
tpm2_load_cmd() does boundary checks against the ASN.1 size i.e.,
payload-blob_len. Address this by passing the decoded blob size to
tpm2_load_cmd(), and use it for the boundary checks.
-
CVE-2026-98217
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
IB/mlx4: Fix use-after-free on pkey sysfs registration failure
register_pkey_tree() ignores errors from register_one_pkey_tree() and
continues registering the remaining slaves. The per-slave error path has
already released the pkey parent kobjects, but their pointers remain
stored in the device. A later device cleanup therefore passes the stale
pointers to kobject_put(), causing a use-after-free.
Clear the parent pointers after releasing a failed slave tree and skip
unregistered trees during device cleanup. This preserves the existing
best-effort registration behavior while preventing a second cleanup of
the failed tree.
-
CVE-2026-98216
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
IB/hfi1: Fix the PIO_CRED credit-return mmap
hfi1_file_mmap()'s PIO_CRED case must hand user space the single
credit-return page that holds this context's entry. That page is the
second or third page of the per-node credit-return allocation once the
hardware send context index reaches 64 or 128, so the failure below is
intermittent: when the entry lands on the first page the offset is zero
and everything works.
Two things are wrong.
First, cr_page_offset is a byte offset but .va is a struct
credit_return *, so adding it is pointer arithmetic and scales the offset
by sizeof(struct credit_return) == 64. memvirt then lands 256 KiB or
512 KiB past a 10240-byte allocation. With an IOMMU translating, that
address is inside the vmalloc range but in no vm_area, so
dma_mmap_coherent() - iommu_dma_mmap() finds no pages, vmalloc_to_pfn()
returns page_to_pfn(NULL), and remap_pfn_range() installs a frame above
MAXPHYADDR. The first user read then takes:
psm2_ep_open_pr: Corrupted page table at address 7a14d007e000
PGD 800000013886a067 P4D 800000013886a067 PUD 13886b067 PMD 13886c067
PTE 800049168e911235
Oops: Bad pagetable: 000d [#1] SMP PTI
Second, and still wrong once the arithmetic is corrected,
dma_mmap_coherent() describes a whole coherent buffer and selects the
page within it with vma->vm_pgoff. Offsetting cpu_addr has no effect:
for a vmap'd allocation iommu_dma_mmap() uses cpu_addr only to locate the
vm_area and then maps pages[vm_pgoff], which hfi1_file_mmap() has just
set to 0. User space therefore always receives the first credit-return
page, every credit read is for the wrong context, and send PIO stalls
forever.
Use the DMA API as intended: pass the base of the allocation with its
full length and select the page with vm_pgoff. A separate length is
needed because memlen must keep describing the VMA for the existing size
check. The dma-direct path stays correct as well, since dma_direct_mmap()
adds the same vm_pgoff to the base pfn.
Tested on a Dell T7610 (Xeon E5-2650 v2, Intel IOMMU in DMA-FQ mode)
against a Threadripper PRO 3995WX peer, both Omni-Path 100. Before this
change psm2_ep_open() Oopses the kernel; with only the arithmetic
corrected psm2_ep_open() succeeds but any transfer that uses send PIO
hangs, PSM2_SDMA=2 (send PIO disabled) completing normally while
PSM2_SDMA=0 (send PIO only) hangs every time. With this change send PIO,
send DMA and the default mixed mode all work.
-
CVE-2026-98212
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
mmc: hsq: Fix use-after-free in retry work
mmc_hsq_pump_requests() queues retry_work when request_atomic() returns
-EBUSY; today sdhci-sprd is the only consumer that implements
request_atomic(). The work is embedded in a devm-allocated mmc_hsq, but
is never cancelled during driver removal. Work still pending at unbind
can therefore run after the devm allocation has been released and
dereference hsq-mmc and hsq->mrq.
Use devm_work_autocancel() to cancel and drain retry_work before the devm
allocation is released. By the time devres cleanup begins,
mmc_remove_host() has already stopped the host, so no new requests can
arm the work.
This issue was found by an in-house static analysis tool.
-
CVE-2026-98197
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (w83791d) remove fan/pwm 4-5 sysfs group on remove
When the fan/pwm 4-5 pins are not used as GPIO, w83791d_probe()
creates the w83791d_group_fanpwm45 sysfs group on the I2C client
device.
The probe error path removes this group when a later initialization
step fails, but the normal remove path only removes w83791d_group.
As a result, the optional fan/pwm 4-5 sysfs files can remain after the
driver is unbound.
The callbacks associated with these files access the driver data,
which is devm allocated and released after driver unbind. Leaving the
sysfs files behind can therefore result in accesses to stale driver
data.
Remove w83791d_group_fanpwm45 during normal teardown as well.
This issue was found by manual code inspection.
-
CVE-2026-98194
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas_tf: fix UAF in lbtf_free_adapter()
lbtf_free_adapter() calls lbtf_free_cmd_buffer() to free the command
buffers before calling timer_delete_sync() to wait for the command
timer callback. If the timer callback (command_timer_fn) is already
running when lbtf_free_cmd_buffer() frees the command array, the
callback dereferences priv-cur_cmd->cmdbuf which points to freed
memory.
Swap the order so that timer_delete_sync() runs first, ensuring any
in-flight callback has completed before the command buffers are freed.
-
CVE-2026-98188
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: validate curve data length in the calibration curve converters
p54_convert_rev0() and p54_convert_rev1() read calibration curve
data from the device-supplied EEPROM entry using channel and
points-per-channel counts taken verbatim from that same entry, so
an entry that declares more data than it carries drives an
out-of-bounds read past the EEPROM buffer (verified with a KASAN
reproducer of the conversion loop). The sibling converters
p54_convert_output_limits() and p54_convert_db() already validate
their counts against the entry length; this path was missed.
Reject the entry when the counts do not fit in the entry data.
-
CVE-2026-98171
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs
Fix several related bounds checking and pointer lifecycle issues in
receive_encrypted_standard()'s handling of compound encrypted frames:
- Clear next_buffer after assigning it to server-bigbuf. A stale
next_buffer pointer can lead to a use-after-free on subsequent
error paths.
- Update pdu_length to the decrypted plaintext size (buf_size). Using
the pre-decryption length allows NextCommand to point into stale
ciphertext residue.
- Reject next_cmd values smaller than MID_HEADER_SIZE(server).
- Fix an integer overflow in the upper bound check by verifying
pdu_length - next_cmd MID_HEADER_SIZE(server), ensuring the
trailing slice is large enough for a header.
-
CVE-2026-98169
•
published on October 6, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential OOB read in smb3_enum_snapshots()
If snapshot_array_size is smaller than GMT_TOKEN_SIZE,
smb3_enum_snapshots() sets ret_data_len to
sizeof(struct smb_snapshot_array) without verifying the actual length
of the server's reply.
Because SMB2_ioctl() places no lower bound on the server-supplied
OutputCount and allocates retbuf to exactly that length, a short reply
results in ret_data_len exceeding the size of retbuf. The subsequent
copy_to_user() then reads past the end of retbuf, leaking adjacent slab
memory to userspace. The subsequent clamp check is ineffective as it
only reduces ret_data_len.
Fix this by rejecting replies shorter than
sizeof(struct smb_snapshot_array) with -EIO. Note that the bound is set
to the 12-byte struct size rather than the 16-byte
MIN_SNAPSHOT_ARRAY_SIZE defined in MS-SMB2 3.3.5.15.1, because 12 bytes
is exactly what copy_to_user() attempts to read.