-
CVE-2026-98139
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ntfs: only count successfully cleared runs when freeing clusters
ntfs_cluster_free_from_rl_nolock() adds a run's length to nr_freed
whenever the error bookkeeping condition is false, which includes
cases where ntfs_bitmap_clear_run() actually failed - e.g. a second
run failing with the same errno as an earlier one, or any failure
after a non-ENOMEM error was already recorded. Since a failed
ntfs_bitmap_clear_run() rolls back its partial modifications, no
bits were cleared for that run, yet its length still inflates
vol-free_clusters, corrupting statfs output and the allocator's
free space gate.
Only count runs whose bitmap clear succeeded.
-
CVE-2026-98131
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix dma mapping leak in stmmac_tso_xmit()
In stmmac_tso_xmit(), if the DMA mapping of an skb fragment fails, the
frame is dropped but the DMA mappings already created for the linear
part and for the fragments mapped before the failure are never
unmapped, leaking DMA mappings.
Fix the leak by walking back over the descriptors used by the frame and
releasing each of them with stmmac_free_tx_buffer(). Moreover, release
the descriptors with stmmac_release_tx_desc() unmapping the DMA buffers.
-
CVE-2026-98128
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add()
mpi3mr_get_tgtdev_by_addr() increments the target device kref when it
returns a device. If a subsequent error triggers a goto out_fail after
the tgtdev reference is acquired, the reference is never released
because the out_fail path does not call mpi3mr_tgtdev_put(). This
prevents the target device structure from ever being freed.
Add a tgtdev put in the out_fail path, guarded by a NULL check since
tgtdev is only acquired for SAS_END_DEVICE types and the same cleanup
path is shared by earlier error cases where tgtdev is still NULL.
-
CVE-2026-98124
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb/client: invalidate fscache for fallocate range operations
smb3_zero_range(), smb3_punch_hole(), smb3_insert_range(), and
smb3_collapse_range() modify file contents through server-side range
operations. These operations discard the affected page cache, but leave
the FS-Cache cookie valid, so a later read may return data cached before
the range operation.
Fix this by invalidating FS-Cache after outstanding I/O has completed
and before modifying the file on the server.
Run the following as root on a CIFS mount with fsc enabled and an active
CacheFiles backend:
bash -c '
MNT=/mnt/cifs
FILE="$MNT/repro"
# Generate four 1 MiB random blocks: [A][B][C][D].
dd if=/dev/urandom of=/tmp/src bs=1M count=4 status=none
# Expected contents after zeroing B: [A][zero][C][D].
cp /tmp/src /tmp/expected
dd if=/dev/zero of=/tmp/expected bs=1M seek=1 count=1 \
conv=notrunc status=none
cp /tmp/src "$FILE"
# Populate FS-Cache, then discard the page cache.
sync
echo 1 /proc/sys/vm/drop_caches
cat "$FILE" > /dev/null
sync
echo 1 > /proc/sys/vm/drop_caches
fallocate --zero-range -o 1M -l 1M "$FILE"
if cmp -s /tmp/expected "$FILE"; then
echo "readback: OK"
else
echo "readback: STALE DATA"
fi
'
Before this change, the readback differs from /tmp/expected:
readback: STALE DATA
After this change, it matches:
readback: OK
-
CVE-2026-98120
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix subreq ref leak
Fix a subrequest ref leak in netfs_unbuffered_write() in the event that
subreq-io_iter ends up zero length during preparation.
-
CVE-2026-98117
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix potential UAF/KASAN warning
Currently, trace_cachefiles_coherency() is being passed a pointer to a
__be64 lain over the coherency data in struct cachefiles_xattr so that it
can display the first 8 bytes. However, the data is of variable length and
could even be 0 bytes. This could lead to a UAF or KASAN warning.
Fix this by making sure the buffer has room for at least 8 bytes and that
those 8 bytes are pre-cleared.
Further, those bytes are not 8-byte aligned, so fix the tracepoint to
extract the data as four 2-byte words (they are 2-byte aligned) and
reassemble the __be64. The compiler will convert this into a single 8-byte
load where the CPU supports it.
-
CVE-2026-98112
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix listener task lifetime on netdev events
The listener thread exits when its listening socket is shutdown. The
netdevice notifier shuts down the socket before calling kthread_stop(), so
the task_struct can be freed before kthread_stop() gets its reference.
Create the listener in a stopped state and hold an extra task_struct
reference until kthread_stop_put() completes. Also stop and release
listeners before freeing their interface records during TCP teardown.
-
CVE-2026-98111
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: validate version TLV value lengths
btintel_parse_version_tlv() verifies that a complete TLV is present in
the response, but it does not ensure that the value is long enough for
the specific TLV type. A short value can therefore cause an
out-of-bounds read through get_unaligned_le16(), get_unaligned_le32(),
or memcpy().
Reject values shorter than the minimum required by each known TLV type.
Also reject responses that do not contain the Command Complete Status
field.
-
CVE-2026-98105
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: oa_tc6: Improve the error recovery
When oversubscribed traffic causes lot of buffer overflow errors,
probably due to loss of data chunks, driver fails to find a
data chunk with end_valid bit set, before it runs out of sk buffer
space. As a result, assert is seen during skb_put.
Now, check is made if skb buffer has enough tailroom for the
incoming data before accepting. If there is no room, current
frame is abandoned and it will start looking for a data chunk
with start_valid bit, that is a new frame.
SK buffer allocation error is considered as recoverable error.
rx_buf_overflow flag is too specific and no longer the only
condition this flag is used for. Therefore it is renamed as
wait_until_start_valid. This is more appropriate as this flag
is used to look for the next data chunk with SV bit set, after
failures like buffer overflow, buffer allocation failure, skb pointer
validity besides buffer overflow error.
Not writing to status0 if it reads 0.
-
CVE-2026-98098
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
tipc: fix NULL deref in tipc_named_node_up() on empty publication list
User-space applications can bind a large number of service addresses to
one or more sockets. Each binding of a local-scope service address inserts
one entry (publication) into the TIPC name table. If the number of these
publications exceeds TIPC_MAX_PUBL (65535), protocol service types
(such as node state and link state) are no longer inserted into the name
table. This causes two issues:
1. User-space applications subscribing to node or link up/down events
stop receiving notifications.
2. A NULL pointer dereference can occur:
BUG: kernel NULL pointer dereference, address: 00000000000000d0
...
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc4-default+ #5 PREEMPT(full)
...
RIP: 0010:tipc_named_node_up (./include/linux/skbuff.h:2251 net/tipc/name_distr.c:195 net/tipc/name_distr.c:221)
...
Call Trace:
IRQ
tipc_node_write_unlock (net/tipc/node.c:428)
tipc_rcv (net/tipc/node.c:934 net/tipc/node.c:2189)
tipc_udp_recv (net/tipc/udp_media.c:389)
Thread 1 (tipc_net_finalize) | Thread 2 (named_distribute)
-----------------------------|-----------------------------
| ...
| list_for_each_entry(publ, pls, binding_node) {
| ...
| __skb_queue_tail(list, skb);
| ...
| }
| ...
| hdr = buf_msg(skb_peek_tail(list));
... |
tipc_nametbl_publish(); |
If 'tipc_nametbl_publish()' (Thread 1) fails because the number of
local publications reaches TIPC_MAX_PUBL, list (Thread 2) will be empty. As a
result, NULL is passed to 'buf_msg()', leading to a NULL pointer dereference.
Fix these issues by allowing protocol service types (node state, link state,
and topology server) to be inserted into the name table unconditionally.
This ensures that users subscribing to these types always receive
notifications. In addition, the maximum number of local user publications is
reduced to (TIPC_MAX_PUBL - 1). This ensures that the maximum bulk size
calculated in tipc_link_set_queue_limits() remains valid.
-
CVE-2026-98088
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Avoid out-of-bounds cpumask_of_node() call in _base_assign_reply_queues()
dev_to_node() can return NUMA_NO_NODE (-1) on systems without NUMA
topology information for the PCI device, such as single-socket boards
that don't expose device-to-node affinity. Passing -1 directly into
cpumask_of_node() indexes node_to_cpumask_map[-1], an out-of-bounds
array read caught by UBSAN:
UBSAN: array-index-out-of-bounds in arch/x86/include/asm/topology.h:72:28
index -1 is out of range for type 'cpumask *[1024]'
Fall back to cpu_online_mask when no NUMA node is available, rather than
assuming dev_to_node() always returns a valid node index.
-
CVE-2026-98087
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate
A migrate_disable()'d RT task cannot be moved to another CPU, but the
scheduler still keeps such a task on that CPU's pushable list
(rq-rt.pushable_tasks) and still marks the runqueue RT-overloaded
(rq->rt.overloaded = 1). So the RT balancer keeps treating this CPU as
having a task to move away, and keeps trying to move the task, but the
push can never succeed. When the head is pinned, push_rt_task() does not
give up either. It falls back to pushing rq->curr instead, using the
per-CPU stopper, as added by commit a7c81556ec4d ("sched: Fix
migrate_disable() vs rt/dl balancing").
The CPU spends tens of milliseconds in this retry loop. The core is
isolated for real-time work, but during the loop nearly half of its time
is consumed by pushes that cannot succeed.
An ftrace capture of the affected CPU, with sched_switch enabled and
commit 94894c9c477e ("sched/rt: Skip currently executing CPU in
rto_next_cpu()") applied, shows where the CPU time went. Two SCHED_FIFO
tasks at equal priority shared the CPU, taskA migrate_disable()'d and
queued, taskB as rq->curr. In one 89 ms window, taskB got only 52 ms of
CPU. The other 37 ms went to the stopper thread.
The scheduler kept trying to push taskA, the pinned head of the pushable
list, fell back to pushing taskB instead, and woke the stopper 5204
times. Every one of those pushes failed and no task was moved. taskA
stayed runnable and queued the whole time, and never ran.
Pushing taskB fails on a re-check. find_lock_lowest_rq() drops the rq
lock to take the target rq lock, then checks again with
"task != pick_next_pushable_task(rq)".
The task being pushed is taskB, but the pick returns taskA, the head of
the pushable list. taskB is rq->curr, and set_next_task_rt() removes the
running task from that list, so taskB can never be the head. The check
expects a candidate taken from the pushable list, but the fallback
pushes rq->curr, which is never on that list. So the check fails every
time.
.--> push-IPI arrives
| |
| v
| pushable head = taskA -> pinned, cannot be pushed
| |
| v
| so push taskB instead -> wake migration/N, a stop-class
| | thread, so it preempts taskB
| v
| re-check compares taskB against the pushable head,
| which is still taskA -> give up
| |
| v
| nothing moved, taskA still queued, rq still overloaded
| |
'----------'
repeats every ~17 us, 5204 times, for 89 ms
The loop cannot stop itself. Every round leaves the runqueue
exactly as it was, so the next push-IPI does the same thing. In
the capture it ended only when taskB went to sleep on its own.
taskA was then picked locally and left the pushable list.
CPU time per task in the window, from sched_switch:
taskB 51.95 ms real work
migration/N 37.18 ms nothing moved
taskA 0.00 ms queued the whole time, never picked
idle 0.01 ms
Counts over the same window:
7667 push-IPIs handled on this CPU
17481 pick_next_pushable_task() returned taskA, still pinned
5204 find_lock_lowest_rq() gave up on the re-check
1 push that actually completed
0 migrations of taskA
The CPU times and the window length come from the standard
sched_switch tracepoint. The counts needed tracepoints added inside
the RT balancer for this investigation.
The self-IPI path is closed by the rto_next_cpu() fix above, and that
part works. But the runqueue is still marked overloaded, because the
pinned task is still advertised as pushable. Other CPUs now send the
push-IPIs during their own RT balancing, and the same loop runs again.
Closing the self-IPI path did not stop a pinn
---truncated---
-
CVE-2026-98079
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
btrfs: zstd: fix lost wakeup when waiting for a workspace
A writer can sleep forever in zstd_get_workspace() even though a workspace
is free. When zstd_alloc_workspace() fails, the task is queued on
zwsm-wait and schedules unconditionally, never re-testing the pool.
zstd_put_workspace() publishes the workspace and then calls cond_wake_up(),
which only wakes when a sleeper is already visible, so a workspace returned
between the failed allocation and prepare_to_wait() wakes nobody. The
window is wide: zstd_alloc_workspace() goes through kvmalloc() and may
enter reclaim.
Only a max level workspace triggers the wakeup and one is deliberately kept
allocated as the fallback every waiter waits for, so once its wakeup is
lost the writer stays in TASK_UNINTERRUPTIBLE until some other task happens
to return one. Re-check the pool after prepare_to_wait() has published the
waiter, and use the workspace if one turned up.
-
CVE-2026-98078
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix reversed sequence option serialization
hton_seq() expects the host-order source first and the unaligned
network-order destination second. The version 1 sync sender passes these
arguments in reverse for both sequence blocks. This leaves 24 bytes of the
kmalloc-backed message unwritten. It may disclose stale heap data and
replace the live connection sequence state with values read from the
buffer.
Pass the connection sequence state as the source and the message payload as
the destination for both blocks.
-
CVE-2026-98065
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject key-less BTF for hash maps
map_check_btf() allows a key-less BTF (btf_key_type_id == 0) only for
maps that have a -map_check_btf callback, and leaves the actual
decision to that callback. Hash maps used to have no ->map_check_btf,
so a key-less BTF was rejected outright.
That changed when htab and rhtab gained a ->map_check_btf to register a
dtor - htab in commit 1df97a7453ee ("bpf: Register dtor for freeing
special fields") and rhtab in commit 6905f8601298 ("bpf: Allow special
fields in resizable hashtab"). Neither looks at the key, so a key-less
hash map now passes map_check_btf() and gets created. Reading it back
through bpffs feeds the key type_id 0 into btf_type_seq_show();
btf_type_by_id() returns the void type, kind_ops[BTF_KIND_UNKN] is NULL,
and btf_type_show() dereferences it:
RIP: 0010:btf_type_show+0x223/0x2e0 kernel/bpf/btf.c:8232
RSP: 0018:ffffc9000399f868 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000005 RSI: 0000000000000000 RDI: 0000000000000028
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: ffffc9000399f970 R11: 0000000000000001 R12: ffffffff9b96b140
R13: ffffc9000399f8e0 R14: ffff88803d393c00 R15: 0000000000000003
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000000000 CR3: 000000003d213000 CR4: 0000000000352ef0
DR0: 0000000039ae8f55 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
TASK>
btf_type_seq_show_flags+0xca/0x120 kernel/bpf/btf.c:8250
htab_map_seq_show_elem+0x12e/0x350 kernel/bpf/hashtab.c:1669
map_seq_show+0x13d/0x1e0 kernel/bpf/inode.c:293
traverse.part.0.constprop.0+0x107/0x650 fs/seq_file.c:112
traverse fs/seq_file.c:99 [inline]
seq_read_iter+0x93f/0x1270 fs/seq_file.c:196
seq_read+0x344/0x4d0 fs/seq_file.c:163
vfs_read+0x1e4/0xb40 fs/read_write.c:572
ksys_pread64 fs/read_write.c:764 [inline]
__do_sys_pread64 fs/read_write.c:772 [inline]
__se_sys_pread64 fs/read_write.c:769 [inline]
__x64_sys_pread64+0x1eb/0x250 fs/read_write.c:769
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x123/0x790 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reject a key-less BTF in htab_map_check_btf() and rhtab_map_check_btf(),
restoring the previous behavior.
-
CVE-2026-98063
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL-ptr-deref in btf_var_show()
btf_var_show() calls btf_type_id_resolve() unconditionally, which
dereferences btf-resolved_ids. That is NULL for a base BTF - e.g. the
vmlinux BTF that bpf_snprintf_btf() renders against - since base BTF is
not resolved during parsing. btf_modifier_show() guards this with
'if (btf->resolved_ids)', but btf_var_show() does not.
A BPF program that passes the type_id of a BTF_KIND_VAR from the vmlinux
BTF to bpf_snprintf_btf() thus NULL-derefs:
KASAN: probably user-memory-access in range [0x46638-0x4663f]
RIP: 0010:btf_var_show (kernel/bpf/btf.c:2929)
Call Trace:
TASK>
btf_type_show (kernel/bpf/btf.c:8259)
btf_type_snprintf_show (kernel/bpf/btf.c:8329)
bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047)
bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829)
__sys_bpf (kernel/bpf/syscall.c:4804)
do_syscall_64 (arch/x86/entry/syscall_64.c:84)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Resolve the var's type directly with btf_type_skip_modifiers() when
resolved_ids is NULL, mirroring btf_modifier_show().
-
CVE-2026-98058
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark syscall helpers as sleepable
bpf_sys_bpf() executes the bpf(2) syscall body, which can take mutexes,
allocate with GFP_KERNEL, and wait for an RCU grace period.
bpf_sys_close() reaches close_fd() and filp_close(), which can sleep as
well.
Both helpers are limited to BPF_PROG_TYPE_SYSCALL, whose main program is
sleepable. That does not make every callback sleepable: a syscall program
can register a bpf_timer callback, and the verifier checks that callback
in a non-sleepable context while retaining the syscall helper set.
Without .might_sleep on the prototypes, such a callback can invoke
bpf_sys_bpf() from hrtimer softirq context and trigger a
scheduling-while-atomic failure. bpf_sys_close() is exposed through the
same missing context check.
Set .might_sleep on both prototypes so the existing helper-context check
rejects them from timer callbacks and other atomic regions. Calls from the
sleepable main body remain valid.
-
CVE-2026-98057
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Add checking nr_subbufs to persistent ring buffer validation
Sashiko reported that the code was using meta-nr_subbufs without making
sure that it matched the nr_pages + 1 on data that was assuming the two
were the same.
Add a check to the persistent ring buffer validation code to make sure
that the saved nr_subbufs matches what we expect.
-
CVE-2026-98051
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: fix tx_spb_ring_full() checking same slot cnt times
The loop initialised next_index from intf-tx_spb_index on every
iteration, so incr_ring() always produced the same result and only
one slot was ever tested. Move the initialisation before the loop
so each iteration advances next_index and the function correctly
checks that cnt consecutive descriptor slots are available before
allowing a new transmission.
-
CVE-2026-98048
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: don't rewrite bpf_fastcall patterns entered by a jump
mark_fastcall_pattern_for_call() must ensure that matched
"spill; call; fill" instruction series is not interrupted by a jump.
Otherwise the rewrite applied by bpf_remove_fastcall_spills_fills()
is not sound.
Record the instructions targeted by jumps in
insn_aux_data[*].jump_target when the CFG is built and use this flag
to stop growing a pattern at such an instruction. Jumps to the first
spill are fine.
Note that existing insn_aux_data[*].jmp_point field can't be reused,
as it marks subprogram return instructions.