-
CVE-2026-97994
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
vhost/vdpa: reject VRING_NUM larger than device max
vhost_vring_set_num() accepts any non-zero power-of-two queue size that
fits in 16 bits. vhost-vdpa then passes that value to set_vq_num()
without comparing it with get_vq_num_max().
A process with access to /dev/vhost-vdpa-* can therefore configure a
queue larger than the device advertises. With vdpa_sim, the worker can
walk descriptors beyond the mapped descriptor ring. KASAN reports a
16-byte out-of-bounds read, corresponding to one vring_desc, in the
vringh IOTLB path:
BUG: KASAN: out-of-bounds in _copy_from_iter
Read of size 16
copy_from_iotlb
copydesc_iotlb
vringh_getdesc_iotlb
vdpasim_net_work
Cache get_vq_num_max() immediately after reset. Some backends derive
it from writable queue-size state, so querying it after SET_NUM may
return the current size instead of the device capability. Invalidate
the cached value before reset so a failed reset leaves SET_NUM
disabled.
For VHOST_SET_VRING_NUM, copy the complete vring state once and use
the same index and size for validation, vq-num, and set_vq_num().
This ensures that validation and use operate on the same copied values.
-
CVE-2026-97991
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim_blk: reject out-of-range sector starts
vdpasim_blk_check_range() logs an invalid start sector but continues
validating the request. The subsequent unsigned capacity subtraction can
underflow and let an out-of-range buffer offset reach the data path.
The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT
copies guest data to blk-buffer + offset through
vringh_iov_pull_iotlb(), causing an out-of-bounds write in
_copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from
blk->buffer + offset to the guest through vringh_iov_push_iotlb(),
causing an out-of-bounds read in _copy_to_iter().
VIRTIO_BLK_T_WRITE_ZEROES passes blk->buffer + offset to memset(),
causing an out-of-bounds write.
Reject starts at or beyond the capacity before the subtraction. Treat the
capacity boundary as invalid because the IN and OUT paths round byte counts
down to sectors for validation but later copy the original byte counts. A
sub-sector request at the capacity boundary would otherwise still access
past the end of the buffer.
I found this bug myself, though the patch was written with AI assistance.
-
CVE-2026-97986
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
virtio_input: stop callbacks before unregistering input device
virtinput_remove() unregisters the input device before resetting the
virtio device. virtinput_recv_events() drops vi-lock around input_event(),
so clearing vi->ready does not stop a callback that passed the entry check.
It can still use vi->idev, requeue buffers and kick the queue.
Reset first, as virtinput_freeze() already does. With the preceding core
change, reset waits for callbacks before input_unregister_device() can
free vi->idev. Recheck vi->ready after taking the lock again: keep draining
completed events so an input packet is not truncated, but stop requeueing
buffers and kicking the queue.
With evdev attached, input_unregister_handle() currently waits for an RCU
grace period, which also waits out IRQ callbacks. This masks the lifetime
bug on PCI and MMIO, but does not protect sleepable callbacks on other
transports.
-
CVE-2026-97983
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
vduse: return compat ioctl results directly
The compat handler handles VDUSE_IOTLB_GET_FD and VDUSE_VQ_GET_INFO, but
then calls the native handler. Their different command sizes make native
dispatch return -ENOIOCTLCMD.
For GET_FD, this overwrites receive_fd()'s return value after the
descriptor is installed, leaking one fd per call. Return handled compat
results directly and use native dispatch only for other commands.
-
CVE-2026-97982
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Fix budget accounting
The gmac_rx() function returns the remaining NAPI budget, but its
caller treats the return value as the number of packets received. An
idle poll therefore reports a full budget and remains scheduled.
Return the number of received packets instead. Preserve the existing
free queue refill accounting by adding that count directly; continuing
to subtract it from the budget would invert the refill behavior.
-
CVE-2026-97976
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: validate packet_len before skb_put_data
btintel_pcie_submit_rx_work() reads packet_len from rfh_hdr without
checking if it exceeds the RX buffer size. An oversized packet_len
can lead to an out-of-bounds read in skb_put_data().
Validate packet_len to ensure it is non-zero and does not exceed
BTINTEL_PCIE_BUFFER_SIZE - sizeof(*rfh_hdr), logging an error when
invalid.
This issue was reported by Claude Mythos. It can be simulated either by
using customized firmware configured to return an invalid packet_len or
by modifying rfh_hdr-packet_len in the driver before calling
btintel_pcie_submit_rx_work().
-
CVE-2026-97965
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
vxlan: initialize _md in vxlan_xmit_one()
If a VXLAN device is configured with both VXLAN_F_COLLECT_METADATA and
VXLAN_F_GBP, and a packet is transmitted through it using an external
ip_tunnel_info that lacks the IP_TUNNEL_VXLAN_OPT_BIT flag, md is left
pointing to the uninitialized _md stack variable:
if (test_bit(IP_TUNNEL_VXLAN_OPT_BIT, info-key.tun_flags)) {
if (info->options_len sizeof(*md))
goto drop;
md = ip_tunnel_info_opts(info);
}
Because IP_TUNNEL_VXLAN_OPT_BIT is not set, md is not updated and remains
pointing to _md. Later, vxlan_build_skb() is called with md, which
eventually calls vxlan_build_gbp_hdr():
if (vxflags & VXLAN_F_GBP)
vxlan_build_gbp_hdr(vxh, md);
Inside vxlan_build_gbp_hdr(), md->gbp is read:
if (!md->gbp)
return;
gbp = (struct vxlanhdr_gbp *)vxh;
...
if (md->gbp & VXLAN_GBP_DONT_LEARN)
gbp->dont_learn = 1;
If the stack contains garbage, this causes:
1) VXLAN_HF_GBP flag to be spuriously set in the VXLAN header.
2) gbp->dont_learn and gbp->policy_applied to be set from stack bits.
3) gbp->policy_id to receive 16 bits of uninitialized kernel stack data,
leaking it onto the wire.
Fix this by zero-initializing _md. If IP_TUNNEL_VXLAN_OPT_BIT is not
present, md->gbp remains 0, and vxlan_build_gbp_hdr() returns early
without modifying the VXLAN header.
-
CVE-2026-97964
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ppp_synctty: ensure a writeable skb header
ppp_sync_txmunge() checks headroom before prepending the address and
control bytes, but does not ensure that the skb header is writable.
A received skb can reach this function through PPP channel bridging
without passing through ppp_start_xmit(), which calls skb_cow_head().
For example, a PPPoE frame may share its buffer with a clone queued to
an AF_PACKET socket. If it is bridged to a synchronous tty channel, the
address/control bytes can overwrite data still visible to that socket.
Use skb_cow_head() to ensure both sufficient headroom and a writable
header.
-
CVE-2026-97962
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Move representor vnic reporter to eswitch devlink port
The representor vnic devlink health reporter is created and destroyed
along the representor netdev (un)load path, which is not serialized by
the devlink instance lock. Destroying the reporter from there triggers
a devl_assert_locked() splat on driver unbind:
WARNING: net/devlink/core.c:259 at devl_assert_locked+0x54/0x70, CPU#2: bash/3758
Modules linked in: mlx5_vdpa vringh vdpa mlx5_ib mlx5_fwctl mlx5_core ...
CPU: 2 UID: 0 PID: 3758 Comm: bash Tainted: G W 6.19.0+ #1 PREEMPT
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), ...
RIP: 0010:devl_assert_locked+0x54/0x70
Call Trace:
TASK
devl_health_reporter_destroy+0x3a/0x1b0
mlx5e_vport_rep_unload+0x12d/0x2b0 [mlx5_core]
mlx5_eswitch_unregister_vport_reps+0x1b8/0x220 [mlx5_core]
? __esw_offloads_unload_rep+0x190/0x190 [mlx5_core]
? kernfs_remove_by_name_ns+0xc3/0xf0
device_release_driver_internal+0x3b2/0x560
unbind_store+0xce/0xf0
Move the reporter's lifecycle to the eswitch devlink port (un)register
paths, which are already serialized by the devlink instance lock, and
store the handle on mlx5_devlink_port. Use the port's mlx5_vport as the
reporter priv since the diagnose callback only needs a device handle and
a vport number, and mlx5_vport carries both and is initialized before
any representor driver probes.
-
CVE-2026-97958
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: Don't replay RTM_GETCHAIN in tc_ctl_chain().
If a netlink socket sends RTM_GETCHAIN requests repeatedly
without recv()ing the responses, tc_ctl_chain() hogs CPU and
triggers Hung Task splat. [0]
As caught in the stack trace, netlink_attachskb() could confuse
tc_ctl_chain() by returning -EAGAIN when the userspace netlink
socket's receive buffer is full.
The replay: label exists since commit 32a4f5ecd738 ("net: sched:
introduce chain object to uapi") but was not used initially.
Since commit 9f407f1768d3 ("net: sched: introduce chain templates"),
the label is needed for RTM_NEWCHAIN because tcf_proto_lookup_ops()
may release RTNL to call request_module().
However, the replay logic is unnecessary for RTM_GETCHAIN.
Let's apply the replay logic only for RTM_NEWCHAIN.
[0]:
INFO: task repro:1018 is blocked on a mutex likely owned by task repro:1022.
task:repro state:R running task stack:14096 pid:1022 tgid:1014 ppid:961 task_flags:0x400040 flags:0x00080000
Call Trace:
TASK
? clockevents_program_event (kernel/time/clockevents.c:372)
? pskb_expand_head (net/core/skbuff.c:615)
? skb_release_data (net/core/skbuff.c:1122)
? netlink_attachskb (./include/linux/skbuff.h:1323 ./include/linux/skbuff.h:1332 net/netlink/af_netlink.c:1232)
? __netlink_lookup (./include/linux/rcupdate.h:882 ./include/linux/rhashtable.h:711 net/netlink/af_netlink.c:499)
? tc_chain_notify (net/sched/cls_api.c:3045)
? tc_chain_notify (./include/linux/skbuff.h:1384 net/sched/cls_api.c:3041)
? netlink_unicast (net/netlink/af_netlink.c:1335)
? rtnl_unicast (./include/net/netlink.h:1198 net/core/rtnetlink.c:985)
? tc_ctl_chain (net/sched/cls_api.c:3242)
? rtnetlink_rcv_msg (net/core/rtnetlink.c:7146)
? netlink_unicast (net/netlink/af_netlink.c:1354)
? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:7177)
? netlink_rcv_skb (net/netlink/af_netlink.c:2556)
? netlink_unicast (net/netlink/af_netlink.c:1319)
? netlink_sendmsg (net/netlink/af_netlink.c:1900)
? __sock_sendmsg (net/socket.c:800)
? __sys_sendto (net/socket.c:2281)
? __x64_sys_sendto (net/socket.c:2288 net/socket.c:2284 net/socket.c:2284)
? do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84)
? entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
-
CVE-2026-97956
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: net_failover: Fix the deadlock in net_failover_slave_name_change()
This is a sibling fix of commit
b84c5632c7b3 ("net: net_failover: Fix the deadlock in slave register").
There is netdev_lock_ops() in the upper callers, so using netif_open()
instead of dev_open().
Call Trace:
__schedule+0x2bb/0x650
schedule+0x27/0xb0
schedule_preempt_disabled+0x15/0x30
__mutex_lock.constprop.0+0x550/0xaf0
__mutex_lock_slowpath+0x13/0x20
mutex_lock+0x3b/0x50
dev_open+0x3b/0xe0
net_failover_slave_name_change+0x22/0x40
failover_event+0xd4/0x1e0
notifier_call_chain+0x62/0xf0
raw_notifier_call_chain+0x16/0x30
call_netdevice_notifiers_info+0x50/0x80
netif_change_name+0x200/0x330
do_setlink.isra.0+0xb12/0xdf0
? security_capable+0x9a/0x1e0
? ns_capable+0x31/0x60
rtnl_setlink+0x302/0x670
? netlink_recvmsg+0x296/0x340
? security_capable+0x9a/0x1e0
? __pfx_rtnl_setlink+0x10/0x10
rtnetlink_rcv_msg+0x384/0x460
? __pfx_rtnetlink_rcv_msg+0x10/0x10
netlink_rcv_skb+0x61/0x120
rtnetlink_rcv+0x15/0x30
netlink_unicast+0x28f/0x3c0
netlink_sendmsg+0x216/0x450
__sys_sendto+0x222/0x230
__x64_sys_sendto+0x24/0x40
x64_sys_call+0x1d5d/0x2390
do_syscall_64+0x105/0x5a0
? do_syscall_64+0x140/0x5a0
? exc_page_fault+0x94/0x1e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-
CVE-2026-97948
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
powerpc/eeh: Fix recursive locking on devices without EEH sensitive driver
The commit 1010b4c012b0 ("powerpc/eeh: Make EEH driver device hotplug
safe") refactored the EEH code such that the pci_rescan_remove_lock is
held at the beginning of eeh_handle_normal_event() and the
eeh_reset_device() is called with that lock being held. Looks like the
commit missed to remove the existing lock/unlock inside eeh_rmv_device()
which is no longer necessary. This is causing the eehd to hang on the
lock which it actually holds when that code path is taken.
[0] 0xc00000011c78f870
[<0>] __switch_to+0xfc/0x1a0
[<0>] pci_lock_rescan_remove+0x30/0x44
[<0>] eeh_rmv_device+0x290/0x2e0
[<0>] eeh_pe_dev_traverse+0x80/0x130
[<0>] eeh_reset_device+0xcc/0x23c
[<0>] eeh_handle_normal_event+0x830/0xa80
[<0>] eeh_event_handler+0xf8/0x190
[<0>] kthread+0x194/0x1b0
[<0>] start_kernel_thread+0x14/0x18
The issue is seen for cases where the errors are detected on the PHB
directly AND|OR for devices where the driver error_detected() returns
PCI_ERS_RESULT_NEED_RESET, and driver being not EEH sensitive(i.e no
error handlers like slot_reset(), resume() etc defined).
-
CVE-2026-97946
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
x86/amd_node: Fix PCI device reference counting in amd_smn_init()
The local "root" pointer is a temporary variable used during the device
search. Therefore, refcount related to the search iterators should be cleaned
up after the search is complete.
Use the __free() cleanup macro to ensure the refcount is decremented when the
temporary pointer goes out of scope.
Additionally, increment the refcount when caching a root pointer. This ensures
the in-use refcount is separate from the temporary search refcounting.
Finally, drop the redundant "root = NULL" before the second search loop. The
pci_get_class() iterator always decrements the refcount of its "from"
argument, so the first loop can only fall through with "root" already NULL.
-
CVE-2026-97945
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix user-space data loss with MADV_FREE and THP
Some of users of Polars (a data analytics library) have lost production
data from this bug. They seem to have just the right combination of
huge pages, MADV_FREE and heavy reclaim pressure.
pmd_modify() masks the old value with (_HPAGE_CHG_MASK & ~_PAGE_DIRTY),
silently discarding the hardware dirty bit. The subsequent
pmd_mksaveddirty() call is supposed to transfer _PAGE_DIRTY into
_PAGE_SAVED_DIRTY when write-protecting, but the dirty bit was already
stripped from the value, so there is nothing left to transfer.
Contrast with pte_modify(), which keeps _PAGE_DIRTY_BITS in its mask,
and pud_modify(), which keeps _HPAGE_CHG_MASK untouched: pmd_modify()
is the odd one out. Any pmd_modify() on a writable, dirty PMD loses
the dirty state.
One visible consequence is data loss with MADV_FREE on PMD-mapped THP:
memset(buf, 0x5A, size); // PMD-mapped THP, PMD dirty
madvise(buf, size, MADV_FREE); // PMD cleaned but left writable,
// folio marked lazyfree
memset(buf, 0x5A, size); // hardware sets _PAGE_DIRTY again
mprotect(buf, size, PROT_READ); // pmd_modify() drops the dirty bit
mprotect(buf, size, PROT_READ|PROT_WRITE);
// ... memory pressure ...
Reclaim (e.g. under memcg pressure) then finds the lazyfree folio with
no dirty bit set anywhere and frees it in
__discard_anon_folio_pmd_locked(), even though the data was rewritten
after MADV_FREE; subsequent reads fault in fresh zero pages. NUMA
hinting alone can trigger the same loss, as do_huge_pmd_numa_page()
restores the PMD through pmd_modify() as well.
PMD-mapped file THPs are affected too: mprotect()/NUMA hinting dropping
the dirty bit means rewritten data is never written back.
Fix it by keeping _PAGE_DIRTY in the preserved mask, exactly like
pte_modify() and pud_modify() do. The existing
pmd_mksaveddirty()/pmd_clear_saveddirty() pair then performs the
hardware-dirty - saved-dirty transition based on the write bit,
preserving the shadow-stack encoding rules.
-
CVE-2026-97941
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
mm/slab: take n-list_lock in __slab_try_return_freelist() to avoid race
Commit ba7425312607 ("mm, slab: add an optimistic
__slab_try_return_freelist()") incorrectly assumed that nobody has freed
an object to the slab as long as slab->freelist is NULL and cmpxchg
succeeds.
However, as reported by Hyunwoo Kim [1], other CPUs might have freed
an object to the slab, insert the slab to the partial list, then
allocated an object from the slab, and be in the middle of removing
the slab from the list under n->list_lock.
Since __refill_objects_node() puts the slab back on pc.slabs
outside n->list_lock, it might insert the slab into that list while
the slab is concurrently being removed from n->partial.
This led to a list corruption [1]:
list_add corruption. next->prev should be prev
(ffff888100000248), but was dead000000000122.
(next=ffffea000416e410).
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 1 UID: 65534 PID: 144 Comm: poc Not tainted
7.2.0-16172-gcf72cbb39da8-dirty #1 PREEMPT(lazy)
RIP: 0010:__list_add_valid_or_report+0x80/0xd0
...
Call Trace:
alloc_from_new_slab+0x183/0x300
___slab_alloc+0x31c/0x890
__kmalloc_noprof+0x3d4/0x800
lsm_blob_alloc+0x2d/0x50
security_msg_msg_alloc+0x26/0x90
load_msg+0x1aa/0x210
do_msgsnd+0x91/0x800
do_syscall_64+0x109/0x5d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Kernel panic - not syncing: Fatal exception
This is a classic ABA problem where cmpxchg succeeds but the state has
changed since __refill_objects_node() took the freelist from the slab.
As Vlastimil Babka mentioned [2], it should be rare to return more than
one slab (due to the racy read of slab->counters in
get_partial_node_bulk()). Therefore, instead of introducing additional
complexity, acquire and release n->list_lock twice in the worst case.
Return the slab directly to the partial list and hold n->list_lock
across the cmpxchg and add_partial(). This is similar to the initial
version of commit ba7425312607 [3]. This is enough to avoid the race as
the list manipulation is serialized by n->list_lock. While at it,
bring back unlikely() hint now that the condition is unlikely.
-
CVE-2026-97937
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ftrace: fork: Initialize function graph state before copy_exec_state()
dup_task_struct() copies the parent's task_struct, including ret_stack.
ftrace_graph_init_task() clears the copied function graph state, but it
currently runs after copy_exec_state().
For non-CLONE_VM forks, copy_exec_state() allocates a new task_exec_state.
If that allocation fails, copy_process() reaches bad_fork_free and
free_task() calls ftrace_graph_exit_task(). Since the child still carries
the parent's ret_stack pointer, the unwind frees the parent's active
function graph return stack. The parent subsequently accesses freed memory
from function_graph_enter_regs().
KASAN reports:
[ 22.190920] ==================================================================
[ 22.195899] BUG: KASAN: slab-use-after-free in function_graph_enter_regs+0xa76/0xb90
[ 22.200747] Write of size 8 at addr ff110000054dc0a8 by task repro/1
[ 22.205134]
[ 22.210770] CPU: 0 UID: 0 PID: 1 Comm: repro Not tainted 7.2.0-07732-g9328b3b03bdc-dirty #3 PREEMPT(lazy)
[ 22.212576] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 22.213750] Call Trace:
[ 22.215271] TASK
[ 22.216242] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.217774] dump_stack_lvl+0x4e/0x70
[ 22.220531] print_report+0x157/0x4b4
[ 22.223202] ? fixup_red_left+0x9/0x30
[ 22.224407] ? complete_report_info+0x83/0x110
[ 22.226679] ? function_graph_enter_regs+0xa76/0xb90
[ 22.228084] kasan_report+0xce/0x100
[ 22.230109] ? function_graph_enter_regs+0xa76/0xb90
[ 22.232860] ? stack_trace_save+0x4/0xd0
[ 22.234156] function_graph_enter_regs+0xa76/0xb90
[ 22.236090] ? kasan_save_stack+0x30/0x50
[ 22.237752] ? __pfx_function_graph_enter_regs+0x10/0x10
[ 22.238694] ? ring_buffer_lock_reserve+0x345/0xf80
[ 22.239628] ? stack_trace_save+0x4/0xd0
[ 22.242121] ? stack_trace_save+0x4/0xd0
[ 22.243588] ftrace_graph_func+0xda/0x160
[ 22.245362] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.246520] 0xffffffffa0000095
[ 22.250528] ? stack_trace_save+0x9/0xd0
[ 22.251757] ? ring_buffer_unlock_commit+0x11d/0x5c0
[ 22.253152] stack_trace_save+0x9/0xd0
[ 22.254264] kasan_save_stack+0x30/0x50
[ 22.273631] kasan_save_track+0x14/0x30
[ 22.276763] kasan_save_free_info+0x3b/0x70
[ 22.278296] __kasan_slab_free+0x43/0x70
[ 22.280157] kmem_cache_free+0xbf/0x3b0
[ 22.282963] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.284001] free_task+0xa2/0x160
[ 22.285699] ? ftrace_stub_direct_tramp+0x10/0x10
[ 22.286752] copy_process+0x2aae/0x7bc0
Initialize the child function graph state immediately after
dup_task_struct(), before the first fallible operation.
-
CVE-2026-97936
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix memory corruption from the histogram stacktrace modifier
parse_field() sets HIST_FIELD_FL_STACKTRACE from the ".stacktrace"
modifier before it looks the field name up, and nothing afterwards
checks that the name resolved to a field which holds a stacktrace.
create_hist_field() picks HIST_FIELD_FN_STACK on the strength of the
field pointer alone, which reads a __data_loc word from the record and
follows its low 16 bits as an offset into the same record.
event_hist_trigger() takes the first word there as an entry count and
copies that many longs into a 31 entry array:
n_entries = *stack;
memcpy(entries, ++stack, n_entries * sizeof(unsigned long));
Neither end of that copy is bounded, and the count is whatever the event
holds at the offset, so any field will do:
# cd /sys/kernel/tracing/events/sched/sched_process_fork
# echo 'hist:keys=parent_pid.stacktrace' trigger
# (true)
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: 0010:rb_insert_color+0x18/0x130
timerqueue_linked_add+0x7e/0xd0
enqueue_hrtimer+0x39/0xb0
__hrtimer_run_queues+0x10f/0x1f0
/IRQ>
RIP: 0010:memcpy+0xc/0x30
event_hist_trigger+0x165/0x690
The timer interrupt landed on the rbtree the copy had already run over.
No debug options are needed for this; KASAN reports the same write as an
out-of-bounds read of 13835058055416381440 bytes.
Documentation/trace/histogram.rst already states the rule, "must be a
long[] type", so enforce it once the name has been resolved. Names which
resolve to no field at all, "hitcount.stacktrace" and the common_*
pseudo-fields, are refused for the same reason: they hold no stacktrace
to read.
-
CVE-2026-97932
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Don't dereference trace_event_file in deferred trigger free
The enable_event trigger defers trace_event_put_ref() to the
trigger free kthread, but the trace_event_file can already be freed
when the instance is removed.
Keep the trace_event_call directly in enable_trigger_data so the
deferred free does not access the freed trace_event_file.
-
CVE-2026-97925
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
tick/broadcast: Plug clockevents replacement race
朱恺乾 reported and decoded the following race condition when a broadcast
device is replaced:
CPUA CPUB
__tick_broadcast_oneshot_control()
bc = tick_broadcast_device.evtdev;
tick_install_broadcast_device(dev)
clockevents_exchange_device(cur, dev)
shutdown(cur);
detach(cur);
cur-handler = noop;
tick_broadcast_device.evtdev = dev;
tick_broadcast_set_event(bc, next_event); - FAIL: arms a detached device.
If the original broadcast device has a restricted interrupt affinity mask
and the last CPU in that mask goes offline then the BUG() in
tick_cleanup_dead_cpu() triggers because the clockevent device is not in
detached state.
The reason for this is that tick_install_broadcast_device() is not
serialized vs. tick broadcast operations.
The obvious cure is to serialize tick_install_broadcast_device() with
tick_broadcast_lock against a concurrent tick broadcast operation.
That requires to split clockevents_exchange_device() into two parts, one
which does the exchange, shutdown and detach operation and the other which
drops the module reference count. This is required because the module
reference cannot be dropped while holding tick_broadcast_lock.
Let clockevents_exchange_device() do both operations as before, but let the
broadcast device code take the two step approach and do the device
exchange under tick_broadcast_lock and drop the module reference count
after releasing it.
-
CVE-2026-97921
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Free histogram the field rejected for a bad modifier
Writing a hist trigger whose value or variable carries a modifier that is
not allowed there leaks the fields that were built for it.
__create_val_field() takes the field from parse_expr() and stores it in
hist_data-fields[] only after the modifier checks have run:
hist_field = parse_expr(hist_data, file, field_str, flags, var_name,
&n_subexprs);
...
if (hist_field->flags & HIST_FIELD_FL_VAR) {
if (hist_field->flags & (...))
goto err;
} else {
if (hist_field->flags & (...))
goto err;
}
hist_data->fields[val_idx] = hist_field;
Both checks jump past that store, and the err label returns without
freeing anything. The error unwinds to create_hist_data(), which calls
destroy_hist_data() -> destroy_hist_fields(), and that reaches a field
only by walking fields[]. A field that never got there is unreachable.
commit e0213434fe3e ("tracing: Do not let histogram values have some
modifiers") set ret to -EINVAL and fell through to the store, which left
the field owned by fields[] and freed along with the rest of hist_data.
Splitting the check into a value case and a variable case replaced that
fall-through with a goto that skips it.
With CONFIG_DEBUG_KMEMLEAK, 200 writes of
# echo 'hist:keys=prev_pid:vals=next_pid.log2' > \
events/sched/sched_switch/trigger
each correctly rejected with -EINVAL, leave 332 unreferenced objects
(63744 bytes) reported at create_hist_field(); 200 install and remove
cycles of a valid trigger leave none. A '.log2' field is two
allocations, since create_hist_field() puts the plain field in
operands[0] of the log2 field, and both are reported.
Use destroy_hist_field() rather than __destroy_hist_field() so that
operands[0] is freed as well. It returns early for HIST_FIELD_FL_VAR_REF,
which is what an operand owned by hist_data->var_refs[] needs; the
rejected field itself is never a var ref, because a var ref never carries
a modifier flag.