-
CVE-2026-98090
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
btrfs: restore active device pointers after failed sprout
btrfs_init_new_device() switches latest_dev and possibly s_bdev from the
seed device to the new sprout device before creating the first writable
chunks.
If chunk creation or the subsequent sprout setup fails, the error path
releases the new device without switching those pointers back.
btrfs_show_devname() can then dereference the freed latest_dev and crash.
Restore the active device pointers to the latest seed device before
removing and releasing the failed sprout device.
-
CVE-2026-98089
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bonding: alb: fix uninitialized transport header access in alb_determine_nd()
alb_determine_nd() uses icmp6_hdr(skb) to inspect ICMPv6 headers.
However, in xmit paths (e.g. packets sent via AF_PACKET / raw sockets
or forwarded packets), skb-transport_header is not guaranteed to be
initialized. While pskb_network_may_pull() ensures the packet data is
linear starting from the network header, it does not set or adjust the
transport header offset.
Dereferencing icmp6_hdr(skb) can therefore access out-of-bounds memory.
Fetch the icmp6hdr directly after ipv6hdr following pskb_network_may_pull(),
and reload ipv6hdr in case pskb_may_pull() reallocated skb->head.
Also remove the unused bond argument from alb_determine_nd().
-
CVE-2026-98086
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ALSA: ump: do not touch legacy_rmidi before it exists
snd_ump_parse_endpoint() sets ump-parsed on every exit, including
error, before the caller attaches the legacy rawmidi device.
ump_handle_ep_name_msg() then treats parsed as "legacy_rmidi is live"
and calls ump_legacy_set_rawmidi_name(), which snprintf()s into
ump->legacy_rmidi->name. If a UMP packet arrives in that window
(IRQ path from snd_ump_receive), legacy_rmidi is still NULL
(KASAN null-ptr-deref in snprintf).
Guard the legacy helpers. parsed only means endpoint info was
parsed, not that legacy_rmidi exists.
-
CVE-2026-98084
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: backtracking shouldn't clear outer frame R1-R5 for callbacks
When processing calls to bpf_loop() verifier marks R1 (and R4) as
precise. R1 tracks loop iterations number and because of the
'callback_depth R1' mechanics in check_helper_call() must be marked
precise. However, precision propagation for R1 was broken,
when bpf_loop() call was verified on a second iteration.
Consider the following verification trace:
- main: bpf_loop(nr_loops, callback ...)
- callback: BPF_EXIT
- main: bpf_loop(nr_loops, callback ...)
- ...
While the first visit of the call to bpf_loop() propagated R1
precision as expected, the second call to mark_chain_precision() in
the check_helper_call() set R1, but it was immediately reset when
backtrack_insn() processed preceding BPF_EXIT in the loop deleted in
this patch.
Because of that, the second visit of the call to bpf_loop() injected
checkpoint with R1 not marked as precise. Which could trick the
verifier into accepting unsafe programs. See the next patch for an
example of such program.
Commit is structured in a way to minimize conflicts when
'bpf' would be eventually merged with 'bpf-next'.
-
CVE-2026-98082
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix the possible bioc_list memory leak during error
There are two possible ways to leak bioc memory on
btrfs_ordered_extent::bioc_list:
- An error occurred for btrfs_insert_one_raid_extent()
Then the function btrfs_insert_raid_extent() immediately return
without freeing any bioc in the bioc_list.
- An ordered extent hit an IO error
In that case the ordered extent will have BTRFS_ORDERED_IOERR set, and
skip the call on btrfs_insert_raid_extent() completely.
Fix the problem by:
- Introduce a new helper, btrfs_cleanup_ordered_bioc_list()
Which will remove all bioc from the bioc_list, and release the bioc.
- Call the above helper for btrfs_insert_raid_extent()
So that the cleanup helper is always called no matter what.
- Call the above helper for btrfs_finish_one_ordered()
This is called just before the final release on the ordered extent.
This was reported by Sashiko when reviewing another patch.
-
CVE-2026-98074
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bonding: do not clear curr_active_slave prematurely when releasing all slaves
When releasing all slaves during bond destruction (all == true),
__bond_release_one() unconditionally clears bond-curr_active_slave to
NULL in every iteration.
If a backup slave is released before the active slave,
bond_alb_deinit_slave() triggers rlb_teach_disabled_mac_on_primary(),
which increments the active slave dev promiscuity counter and sets
bond_info->primary_is_promisc = 1.
Because bond->curr_active_slave was prematurely cleared to NULL when
releasing the backup slave, the subsequent iteration releasing the active
slave evaluates oldcurrent as NULL, so bond_change_active_slave(bond, NULL)
is skipped. Consequently, bond_alb_handle_active_change() is never called
to decrement the promiscuity counter, permanently leaking promiscuous
mode on the physical device after bond teardown.
When oldcurrent == slave, bond_change_active_slave(bond, NULL) already sets
bond->curr_active_slave to NULL. We only need to avoid selecting a new
active slave when all == true. Replace the if (all) branch with
if (!all && oldcurrent == slave).
-
CVE-2026-98073
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().
syzbot reported the warning in cfg80211_pernet_exit(). [0]
The repro does the following:
1. create two device in root netns and non-root netns
2. assign the same altname for the two devices
3. remove the non-root netns
Since commit 7663d522099e ("net: check for altname conflicts
when changing netdev's netns"), cfg80211_switch_netns() and
cfg802154_switch_netns() fail if init_net has a device with the
conflicting altname.
default_device_exit_net() had the same issue and commit d09486a04f5d
("net: fix removing a namespace with conflicting altnames") fixed it.
cfg80211_pernet_exit() and cfg802154_pernet_exit() need the same fix.
Let's generalise the fix by removing conflicting altnames for dying
netns in __dev_change_net_namespace().
[0]:
cfg80211_switch_netns(rdev, &init_net)
WARNING: net/wireless/core.c:1871 at cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871, CPU#1: kworker/u8:9/1160
Modules linked in:
CPU: 1 UID: 0 PID: 1160 Comm: kworker/u8:9 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/24/2026
Workqueue: netns cleanup_net
RIP: 0010:cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871
Code: e8 03 42 80 3c 20 00 74 08 4c 89 f7 e8 b4 ef 0e f7 4d 8b 36 49 81 fe 20 10 4a 90 74 12 e8 03 3d 9f f6 eb 85 e8 fc 3c 9f f6 90 0f 0b 90 eb cc e8 f1 3c 9f f6 eb 05 e8 ea 3c 9f f6 5b 41 5c 41 5e
RSP: 0018:ffffc900057a78f0 EFLAGS: 00010293
RAX: ffffffff8b287154 RBX: ffff88807ba72780 RCX: ffff8880213e8000
RDX: 0000000000000000 RSI: 00000000ffffffef RDI: 0000000000000000
RBP: 00000000ffffffef R08: ffffffff9024cc67 R09: 0000000000000000
R10: fffff52000af4eb0 R11: fffffbfff204998d R12: dffffc0000000000
R13: ffffffff904a1080 R14: ffff888144ed0008 R15: ffff888144ed0e20
FS: 0000000000000000(0000) GS:ffff888124de6000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005642de0a8a70 CR3: 000000007a40c000 CR4: 00000000003526f0
Call Trace:
ops_exit_list net/core/net_namespace.c:200 [inline]
ops_undo_list+0x43d/0x8d0 net/core/net_namespace.c:253
cleanup_net+0x572/0x810 net/core/net_namespace.c:706
process_one_work kernel/workqueue.c:3387 [inline]
process_scheduled_works+0xc3d/0x1630 kernel/workqueue.c:3470
worker_thread+0xa47/0xfb0 kernel/workqueue.c:3551
kthread+0x38b/0x480 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
-
CVE-2026-98072
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/rds: use wq_has_sleeper() in release_in_xmit()
release_in_xmit() clears RDS_IN_XMIT with clear_bit_unlock() and then
checks waitqueue_active() to decide whether anyone needs waking.
clear_bit_unlock() is only a release operation: it orders the
critical section before the bit clear, but does not order the
subsequent plain load of the wait queue head after it. The waiter
side does the mirror image - it adds itself to the wait queue and
then tests the bit. That is the classic store-buffering pattern: the
releasing CPU can read the wait queue as empty while the waiting CPU
still reads the bit as set, so the sleeper is never woken.
The waiters are rds_conn_shutdown() and rds_tcp_reset_callbacks(),
both in uninterruptible wait_event() with no timeout. A lost wake-up
strands the shutdown worker on its single-threaded workqueue until
some other sender releases the bit again - and on a connection that
is being torn down precisely because it failed, there may never be
another sender.
The barrier used to be there: release_in_xmit() did clear_bit()
followed by smp_mb__after_atomic() until commit 1422f28826d2 ("rds:
introduce acquire/release ordering in acquire/release_in_xmit()")
folded both into clear_bit_unlock(), which strengthened the lock
hand-off but silently dropped the full barrier the wake-up check
depends on. The refill counterpart, release_refill() in
net/rds/ib_recv.c, still carries its smp_mb__after_atomic() for
exactly this reason.
Use wq_has_sleeper(), which is waitqueue_active() preceded by the
required full barrier.
-
CVE-2026-98071
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/rds: clear cp_flags bits individually in rds_conn_path_reset()
rds_conn_path_reset() wipes the whole flag word with a plain
cp-cp_flags = 0 store. Every other accessor of that word uses
atomic bitops, and some of them can run concurrently with the reset:
RDS_LL_SEND_FULL is set from rds_send_xmit() and cleared from the
transport completion paths, neither of which holds anything that
excludes the shutdown worker. A plain store racing an atomic
read-modify-write on the same word is a data race, and whichever
side loses has its update silently discarded.
Clear the two bits the reset is actually responsible for instead.
RDS_IN_XMIT and RDS_RECV_REFILL need no store at all here: they
belong to the caller, rds_conn_shutdown(), which waits for both to be
clear before calling the transport shutdown and this reset.
This also gives every bit in cp_flags a single well-defined writer
discipline, which the following patches rely on when they turn
RDS_IN_XMIT and RDS_RECV_REFILL into bit locks held across the
teardown: a blanket store mid-teardown would destroy lock ownership
that an atomic clear preserves.
Oracle UEK carries the same conversion ("net/rds: Preserve essential
connection state flags"), motivated by its asynchronous shutdown
state machine, whose progress and destroy flags must survive the
reset. UEK's variant also clears RDS_IN_XMIT and RDS_RECV_REFILL
because there the reset runs as the final step of a teardown that
owns both bits, making those clears its unlock. Upstream that
release belongs in rds_conn_shutdown(): once a later patch in this
series turns the two bits into locks held across the teardown, ending
ownership needs release semantics and a wake-up that a plain clear
inside the reset would not provide.
Based on Oracle UEK commit "net/rds: Preserve essential connection
state flags" by Gerd Rausch.
-
CVE-2026-98069
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/rds: acquire the fastpath locks in rds_conn_shutdown()
rds_conn_shutdown() quiesces the transmit and receive-refill paths by
waiting for RDS_IN_XMIT and RDS_RECV_REFILL to be sampled clear, and
then runs the transport shutdown and rds_conn_path_reset(). Sampling
the bits clear is not the same as owning them: the moment after the
wait_event() returns, rds_send_xmit() can re-acquire RDS_IN_XMIT (or
rds_ib_recv_refill() can re-acquire RDS_RECV_REFILL) and run
concurrently with the teardown.
The sender does recheck the connection state after taking the lock,
but that recheck is a classic store-buffering pattern: teardown writes
the state and reads the bit while the sender writes the bit and reads
the state. acquire_in_xmit() is only an acquire operation, so on
weakly ordered architectures both sides can miss each other's write,
and the transmit path then runs while the transport zeroes its rings
(e.g. rds_ib_ring_init()) and rds_send_path_reset() rewrites the
transmit state under it.
Oracle UEK fixed the same class of crashes - a 14-year tail of
BUG_ON()s in rds_ib_sub_signaled(), unexpected op-codes and NULL
dereferences in rds_ib_send_cqe_handler() during failover testing -
by making the teardown path *acquire* the fastpath bit locks instead
of testing them ("rds: Make sure transmit path and connection
tear-down does not run concurrently"). Ownership of a single word is
decided by RMW atomicity, so no cross-variable ordering is needed.
Do the same here: take both locks before calling the transport
shutdown, hold them across rds_conn_path_reset(), and release them
explicitly with a wake-up afterwards. Both are released with
clear_bit_unlock(), so that the ring re-initialization done by the
transport shutdown and the transmit state rewritten by
rds_send_path_reset() are ordered before either bit is seen clear by
the next acquire_in_xmit() or acquire_refill().
The fastpath users of these bits - rds_send_xmit() and
rds_ib_recv_refill() - are trylock style and back off while teardown
owns the locks, so no new lock dependency is introduced for them.
rds_tcp_reset_callbacks() is different: since the previous patch it
acquires RDS_IN_XMIT as well, and it blocks doing so, so its wait now
spans the teardown instead of at most one send batch. That waiter
runs from rds_tcp_accept_one() on the single-threaded krdsd workqueue
and holds rds_tcp_accept_lock and t_conn_path_lock while it waits, so
a duelling SYN accepted while its path is being torn down parks
accept processing for the duration of the teardown - for TCP bounded
by the (up to 5 s) drain loop in rds_tcp_conn_path_shutdown(). An IB
path's drain in rds_ib_conn_path_shutdown() has no round cap, but no
blocking waiter either: rds_tcp_reset_callbacks() is the only blocking
acquirer of these bits and waits only on its own TCP path, and the
fastpaths are trylock-and-back-off on both transports, so a long IB
drain lengthens only that path's own quiesce. The
window is narrow: the accept-side state check has to pass before the
teardown moves the path to RDS_CONN_DISCONNECTING.
Because krdsd is a single global workqueue, everything else queued
there - accept processing for other connections and network
namespaces, and the flush_workqueue(rds_wq) in rds_tcp_listen_stop()
during namespace teardown - waits behind the parked accept worker for
that time. It cannot deadlock, although the waits do point at each
other: the teardown blocks until the bit's holder releases it, and
the holder may be that krdsd accept worker. The holder finishes
without needing anything the teardown owns: the sync cancels
rds_tcp_reset_callbacks() issues target cp_send_w and cp_recv_w on
the path's ordered cp_wq, whose only execution slot is occupied by
the blocked cp_down_w itself, so they are pending at most and cancel
without flushing - a reliance on cp_wq being ordered that is now
noted next to those cancels (on
---truncated---
-
CVE-2026-98068
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/rds: don't let rds_conn_shutdown() consume a concurrent drop
rds_conn_shutdown() finishes by moving the path from
RDS_CONN_DISCONNECTING to RDS_CONN_DOWN, and also accepts
RDS_CONN_ERROR as the starting state of that final transition, so that
a FIN processed in softirq context during the teardown does not derail
the shutdown into a noisy error path.
But consuming that RDS_CONN_ERROR also consumes the shutdown pass that
came with it: rds_conn_path_drop() sets RDS_CONN_ERROR and then queues
cp_down_w, and a pass that starts on a path already in RDS_CONN_DOWN
is a no-op. For the FIN case that is harmless - the socket the FIN
arrived on is the very socket the teardown just released. It is not
harmless for a dropper that attached something to the path first.
rds_tcp_accept_one() is such a dropper. Its path claim in
rds_tcp_accept_one_path() transitions RDS_CONN_DOWN -
RDS_CONN_CONNECTING, and a concurrent drop - a FIN on a previous
socket in softirq context, an administrative reset - can put the path
into RDS_CONN_ERROR between that claim and the state check that
follows, which accepts RDS_CONN_ERROR. The accept then installs the
freshly accepted socket with rds_tcp_set_callbacks() while the queued
teardown - which sampled tc->t_sock before this socket existed - is
still running. rds_connect_path_complete() fails its transition to
RDS_CONN_UP and drops the path again, queueing the pass that should
reap the socket it just installed. If the in-flight shutdown's final
transition consumes that drop's RDS_CONN_ERROR, the queued pass finds
the path in RDS_CONN_DOWN and does nothing. The installed socket is
never torn down: it sits established with its callbacks armed and its
rds_tcp_connection on rds_tcp_tc_list, the peer sees a connection that
nothing ever reads, and the path is wedged in RDS_CONN_DOWN until some
later event drops it again. Reproduced with widened race windows as
an ever-growing receive queue on a socket owned by a path stuck in
RDS_CONN_DOWN, with the peer's send path wedged behind it.
Make the final transition only DISCONNECTING -> DOWN. If it fails
because the path is in RDS_CONN_ERROR, a drop raced the teardown:
cancel the reconnect timer and clear RDS_RECONNECT_PENDING - the one
piece of the skipped tail that must not be left behind - and return,
letting the pass the drop queued finish the job: it tears down
whatever attached to the path in the meantime, completes the
transition to RDS_CONN_DOWN, and re-arms the reconnect from its own
tail.
The timer quiesce in that branch matters because the racing drop does
not always queue that pass: rds_conn_path_drop() returns without
queueing when a destroy is pending - exactly the situation during a
netns teardown or module unload, when a FIN on the dying socket is
processed while rds_conn_path_destroy() flushes cp_down_w. If the
flushed pass is the one that takes this return, no later pass exists,
and rds_conn_path_destroy() would find cp_conn_w still armed
(WARN_ON) and then free a path whose reconnect timer can still fire.
With the cancel in the branch, every exit of a shutdown pass leaves
the timer quiesced no matter which pass completes the transition.
The FIN case keeps making progress, one pass later and still without
noisy logging. Any other state keeps today's rds_conn_path_error()
handling; no current cp_state writer can leave a DISCONNECTING path
in anything but RDS_CONN_ERROR (every other writer is a cmpxchg from
a non-DISCONNECTING state), so that branch is defensive.
On kernels without the preceding patches the same hazard exists with
the sample-based quiesce; the fix applies there equally.
-
CVE-2026-98066
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: Fix potential double-free at error path
The fix for caiaq driver's resource management to handle the errors
tries to release the resources in a common destructor call, but as a
sashiko review for another patch suggested, some of the audio
resources such as URBs have been already freed, and this may lead to a
double-free.
For addressing the double-free, call the common destructor function
from each place, and assure that the resource pointers get cleared.
-
CVE-2026-98061
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject tail calls directly from callback frames
A tail call from a non-zero frame is modeled as a return from that frame.
The verifier makes R0 unknown and calls prepare_func_exit() for the taken
branch.
When the current frame is a synchronous callback, prepare_func_exit()
enforces the callback return-value contract and marks R0 precise. Since the
tail-call path synthesized R0 rather than deriving it from an instruction,
precision backtracking reaches the callback-calling instruction with R0
still requested and triggers the "callback unexpected regs" verifier bug.
A CAP_BPF task can therefore cause a WARN and an -EFAULT BPF_PROG_LOAD.
Tail calls reachable from callbacks are already rejected later by
check_max_stack_depth(). Reject a tail call made directly by a callback
before constructing the inconsistent return state, using the existing
diagnostic. Tail calls from ordinary subprograms keep their current
behavior.
-
CVE-2026-98060
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject resilient lock operations in rbtree callbacks
__bpf_rbtree_add() keeps parent and link pointers live across calls to the
program-supplied comparison callback. The verifier therefore requires the
root's lock to remain held throughout the callback.
The helper path enforces this rule for bpf_spin_lock() and
bpf_spin_unlock(), but the resilient lock kfunc argument path does not.
Since resilient locks may protect BPF rbtree roots, a callback can release
the root lock and let another CPU remove and free the node referenced by
the in-progress tree walk. The walk then resumes using freed pointers.
Reject resilient lock kfuncs in an rbtree comparison callback, matching
the existing policy for the spin lock helpers. Resilient-lock-protected
trees remain valid when their comparison callbacks leave lock state alone.
-
CVE-2026-98056
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
nvme: remove stale namespaces by NSID range during scan
nvme_scan_ns_list() drops the stale namespaces in each gap in the
reported NSID list one NSID at a time. Every iteration calls
nvme_find_get_ns() to look the namespace up and removes it if it is
present. The loop runs once per NSID in the gap rather than once per
namespace actually present.
NSIDs are 32-bit, so a target with a sparse NSID space can make a
single gap spin the loop billions of times with nothing to remove.
watchdog: BUG: soft lockup - CPU#4 stuck for 26s!
Workqueue: nvme-wq nvme_scan_work [nvme_core]
RIP: 0010:__srcu_read_unlock+0xb/0x20
Call Trace:
nvme_find_get_ns+0x7d/0xb0 [nvme_core]
nvme_scan_ns_list+0xe8/0x280 [nvme_core]
nvme_scan_work+0x18a/0x280 [nvme_core]
process_one_work+0x197/0x380
worker_thread+0x2fe/0x410
kthread+0xe0/0x100
Rename nvme_remove_invalid_namespaces() to nvme_remove_nsid_range()
and give it an open (start, end) NSID range. ctrl-namespaces is
sorted by NSID, so the whole gap is dropped in a single walk that
stops once end is reached. This bounds the work by the namespaces
that are present instead of by the size of the gap.
-
CVE-2026-98053
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: avs: Refactor and fix init_config access
Existing code accesses enties found in -init_configs array through
indexes that are part of ->config_ids array. Those two are limited by:
->num_init_configs and ->num_config_ids respectively. Using ID larger
or equal to ->num_init_configs leads to out-of-bounds access:
avs_path_module_send_init_configs()
loop:
(...) &acomp->tplg->init_configs[ids[i]]
^ out-of-bounds candidate
Rather than adding another if-statement, refactor the code. There is no
need to store the IDs, have a list of pointers to actual config-entries
instead. As the verification of ->init_config entries does not differ from
verification of other types that are part of the topology.c file, simply
reuse the code.
-
CVE-2026-98052
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: bcmasp: clear txcb-last before writing each descriptor
bcmasp_xmit() only wrote txcb->last = true for the final fragment
of an SKB; non-final fragments left the field untouched. If a
descriptor slot was reused while it still held a stale true from
a previous SKB (possible when tx_spb_ring_full() underreported
fullness), bcmasp_tx_reclaim() would see last == true mid-SKB and
call dev_consume_skb_any() prematurely, freeing the sk_buff while
its remaining fragments were still in flight.
Unconditionally clear txcb->last before the conditional set so every
descriptor slot starts from a known false state regardless of what a
prior transmission left behind.
-
CVE-2026-98050
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context
Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP
garbage-collection workqueue, rather than the NAPI poll context. For any
unmatched PTP entries carrying an SKB, it calls
mlxsw_sp1_ptp_unmatched_finish() - mlxsw_sp1_ptp_packet_finish(). For
ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end
of that function is the following:
skb->protocol = eth_type_trans(skb, skb->dev);
napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb);
The napi pointer is one that was placed in the SKB control block when the
trapped packet was received in the NAPI context. Later, when the GC reaps
the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to
napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe
if the poll is running concurrently on another CPU.
In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent
softirq processing, but this only applies to the local CPU. Additionally,
its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish()
invokes netif_receive_skb(). This has not been accurate since the
referenced commit; this patch makes that comment accurate again.
mlxsw_pci_napi_devs_init() calls netif_threaded_enable() on the NAPI RX
net_device without any conditions. The NAPI instance's poll, which may be
running concurrent to the GC, is running as an independently-scheduled
kthread which may be on a different CPU. The call to local_bh_disable()
does not guard against this.
If a tx-timestamp timeout produces an unmatched entry (which can be easily
reproduced by running ptp4l and waiting for a port to reach the
UNCALIBRATED/SLAVE state) while the owning NAPI thread is in the middle of
a poll on another CPU, both sides mutate the GRO list concurrently, as
shown below:
[39.846] port 1 (swp1): MASTER to UNCALIBRATED on RS_SLAVE
list_add corruption. next->prev should be prev (ffff8d620faf4138), but was ffff8d624150f700. (next=ffff8d620faf4138).
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 1 UID: 0 PID: 539 Comm: napi/mlxsw_rx-0 Not tainted 6.18.48 #1-NixOS PREEMPT(lazy)
Hardware name: Mellanox Technologies Ltd. MSN2410/VMOD0001, BIOS 4.6.5 09/13/2018
RIP: 0010:__list_add_valid_or_report+0x79/0xb0
RSP: 0018:ffffcdf8c0f27c08 EFLAGS: 00010246
RAX: 0000000000000075 RBX: ffff8d624150fd00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8d6315d1e540
RBP: ffff8d620faf4070 R08: 0000000000000000 R09: 00000000ffffdfff
R10: ffffffffa5c60fe0 R11: ffffcdf8c0f27ab8 R12: 0000000000000003
R13: 000000000000003d R14: 00000000000001bc R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8d636f63f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562689a60c24 CR3: 000000015f224004 CR4: 00000000001726f0
Call Trace:
TASK>
gro_receive_skb+0xee/0x230
mlxsw_sp1_ptp_got_packet+0x61/0x140 [mlxsw_spectrum]
mlxsw_core_skb_receive+0xdf/0x1b0 [mlxsw_core]
mlxsw_pci_napi_poll_cq_rx+0x780/0x9d0 [mlxsw_pci]
__napi_poll+0x31/0x1e0
napi_threaded_poll_loop+0x16b/0x1c0
napi_threaded_poll+0x71/0xa0
kthread+0xfb/0x260
ret_from_fork+0x22d/0x260
ret_from_fork_asm+0x1a/0x30
Kernel panic - not syncing: Fatal exception in interrupt
The machinery that leads to this kernel panic has not been changed between
6.18.48 and mainline.
This patch adds an ingress-delivery helper for the PTP packet_finish()
path that calls netif_receive_skb() instead of napi_gro_receive().
netif_receive_skb(), unlike napi_gro_receive(), can be called from outside
of the NAPI instance's poll context, which can occur at the call site for
this path. RX stats accounting and the skb->dev assignment are still
preserved; the only change is the delivery call itself.
This removes GR
---truncated---
-
CVE-2026-98049
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: zero extend the result of an arena 32-bit cmpxchg
bpf_convert_ctx_accesses() rewrites an atomic on an arena pointer from
BPF_STX | BPF_ATOMIC to BPF_STX | BPF_PROBE_ATOMIC, and it runs before
bpf_opt_subreg_zext_lo32_rnd_hi32().
That pass emits an explicit zero extension for a 32-bit cmpxchg even
when bpf_jit_needs_zext() is false. This is done because on some
architectures 32-bit cmpxchg requires explicit zero extension for the
dst register. E.g. on x86-64 'lock cmpxchg' does not change the %eax
if comparison is successful, while BPF semantics declare that each
operation on a 32-bit register zero extends it's upper half.
is_cmpxchg_insn() matches BPF_MODE == BPF_ATOMIC only, so an arena
cmpxchg misses said zero extension adjustment. This patch adjusts
is_cmpxchg_insn() to match BPF_PROBE_ATOMIC alongside BPF_ATOMIC.
-
CVE-2026-98046
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark bpf_btf_find_by_name_kind() as sleepable
When bpf_btf_find_by_name_kind() finds a type in module BTF, it
returns a new BTF object fd through __btf_new_fd(). This reaches
anon_inode_getfd(), which can sleep while allocating or expanding the
current task fd table.
The helper prototype does not set might_sleep, so the verifier allows
the helper in non-sleepable contexts such as BPF timer callbacks. The
fd allocation can then sleep in softirq context and install the fd into
the interrupted task.
Mark the helper as sleepable. This preserves calls from the main body
of a sleepable syscall program while rejecting calls from its
non-sleepable regions.