-
CVE-2026-97636
•
published on September 24, 2026
Apache Airflow HashiCorp provider: the HashiCorp Vault secrets backend's team-scope guard can be bypassed with a user-controlled key. In a multi-team deployment, a Dag author scoped to one team can supply a Variable key containing a path separator that causes the backend to resolve a secret belonging to a different team, because after the team-scoped lookup misses the backend falls back to a team-agnostic path concatenated from the unvalidated key. The Execution API Variables route accepts a path-shaped key, so this is reachable from ordinary Dag code.
Affects multi-team deployments using the HashiCorp Vault secrets backend. Single-team deployments are not affected, as there is no cross-team boundary to cross. This is the same class as CVE-2026-86465, CVE-2026-68870, CVE-2026-68871 and CVE-2026-68872 in the Akeyless, Azure Key Vault, Yandex Lockbox and Amazon secrets backends.
Users of apache-airflow-providers-hashicorp are recommended to upgrade to version 4.8.0 or later, which fixes the issue.
-
CVE-2026-97621
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: analogix_dp: fix unchecked bound endpoint name length
rockchip_dp_drm_encoder_enable() uses sprintf() to format a device tree
path into a 32-byte stack buffer. Device tree paths are not limited to
this size, so a sufficiently long path can overflow the buffer.
Use snprintf() with the destination size to truncate the generated name
and keep the writes within bounds.
-
CVE-2026-97968
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-cpro) Create debugfs entries after hwmon registration
ccp_debugfs_init() registers debugfs files whose private data is the devm
allocated ccp. It runs before hwmon_device_register_with_info(), so when
that registration fails, ccp_probe() returns with the files still in
place. The HID core then frees ccp, and ccp_remove() is not called for a
failed probe, so nothing removes them later either. Reading one of the
files dereferences the freed pointer.
Create the debugfs entries only after the hwmon device has been
registered, so no failing path can leave them behind.
The two version queries stay where they are. They send USB commands
without holding ccp-mutex, which is only safe as long as nothing else
can call send_usb_cmd(); once the hwmon device is registered its
callbacks can do so concurrently. Only the debugfs creation moves, and
it is told which queries succeeded.
-
CVE-2026-97967
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-cpro) Remove debugfs entries when probe fails
ccp_debugfs_init() registers debugfs files whose private data is the devm
allocated ccp. If hwmon_device_register_with_info() fails right after it,
ccp_probe() returns without removing them: the HID core then frees ccp,
and ccp_remove() is not called for a failed probe, so the files stay
behind. Reading one of them dereferences the freed pointer.
Remove the debugfs entries on that error path. debugfs_remove_recursive()
waits for readers already inside the show callbacks, so ccp is no longer
reachable through debugfs by the time probe returns.
-
CVE-2026-97966
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: reset HTB scheduler topology before freeing queues
HTB offload programs NIX_AF_TLxX_TOPOLOGY on QoS-allocated scheduler
queues via otx2_qos_txschq_set_parent_topology(), but teardown freed
those queues without clearing TOPOLOGY. The AF only restores PARENT and
SCHEDULE on free, so PRIO_ANCHOR/RR_PRIO settings can survive in the
shared scheduler pool and affect later allocations.
Add otx2_qos_reset_schq_topology() and otx2_qos_free_hw_schq() to zero
TL4 through TL2 TOPOLOGY before each schq is returned to the AF during
hierarchy teardown and cfg rollback. Skip the aggregation level (TL1):
it is a per-tx-link queue shared by the PF, default Tx hierarchy and VFs,
and is not freed back to the AF by nix_txschq_free_one().
-
CVE-2026-97960
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Prevent drain_pebs() reentry
The PEBS buffer is shared by all events on a CPU, so drain_pebs() must
not be reentered. If so, one instance may observe stale buffer state and
potentially access out-of-bound memory.
Most invocations happen in NMI context, which naturally prevents reentry.
However, drain_pebs() is also reachable from process context via
intel_pmu_drain_pebs_buffer().
In those paths, the PMU is often already disabled, but not guaranteed.
For example, __intel_pmu_pebs_disable() only disables the target counter,
so other active counters can still raise a PMI and interrupt an in-flight
drain_pebs(). Here is an example,
__perf_addr_filters_adjust()
perf_event_stop()
__perf_event_stop()
x86_pmu_stop() (event-pmu->stop)
intel_pmu_disable_event()
intel_pmu_pebs_disable()
__intel_pmu_pebs_disable()
intel_pmu_drain_large_pebs()
intel_pmu_drain_pebs_buffer()
Introduce __intel_pmu_quiesce() and __intel_pmu_resume() helpers and
use them in intel_pmu_drain_large_pebs() to disable the full PMU
around the intel_pmu_drain_pebs_buffer() call, preventing reentry.
Also add a warning in intel_pmu_drain_pebs_buffer() when the full PMU is
not disabled.
-
CVE-2026-97954
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net/rds: fix tcp stream corruption with large pages
rds_message_map_pages() assigns PAGE_SIZE bytes to every
scatterlist entry, even when total_len ends in a partial page. The RDS
congestion map is defined as 8192 bytes, so on systems with PAGE_SIZE
greater than 8192 the scatterlist maps bytes beyond the end of the
congestion map. RDS-TCP transmits the SG contents according to those
lengths, so the extra bytes become part of the TCP RDS stream and are
interpreted as subsequent RDS message headers, corrupting the stream.
Limit the final scatterlist mapping to the number of bytes remaining.
This has no effect on systems with a 4K page size and allows RDS-TCP to
be used on systems with 16K and larger page sizes.
The RDS selftest, which previously hung on 16K pages, now passes.
-
CVE-2026-97953
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix TX descriptor availability check for TSO traffic
stmmac_tso_xmit() estimates the number of free TX descriptors required by
a TSO skb as:
(skb-len - proto_hdr_len) / TSO_MAX_BUFF_SIZE + 1
which assumes the payload is split into TSO_MAX_BUFF_SIZE chunks. This
underestimates the descriptors actually consumed by stmmac_tso_allocator(),
since each fragment is mapped individually and so it needs at least one
descriptor regardless of its size. Moreover, one descriptor is used for
the L2/L3/L4 headers and, when the MSS changes, one more is consumed for
the MSS context descriptor.
For a highly fragmented TSO skb the check can therefore pass even when the
ring has too few free slots. stmmac_tso_allocator() then writes past the
available descriptors, overwriting descriptors still owned by the DMA
engine, corrupting the TX ring.
Add stmmac_tso_get_num_desc() to compute the exact number of descriptors
needed for the header, the linear payload and each fragment, plus the MSS
context descriptor when required, and use it in the availability check.
-
CVE-2026-97949
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
configfs: unhash the dentry before dropping the item in rmdir
configfs_get_config_item() treats a hashed dentry as proof that
sd-s_element is a live config_item. configfs_rmdir() breaks that:
simple_rmdir() leaves the dentry hashed, the last reference to the item is
dropped right after, and the dentry is only unhashed by d_delete() once
->rmdir() has returned. configfs_symlink() resolves its target holding no
lock on it, so get_target() can land in that window:
BUG: KASAN: slab-use-after-free in config_item_get+0x26/0x90
get_target fs/configfs/symlink.c:128 [inline]
configfs_symlink+0x4ab/0x1030 fs/configfs/symlink.c:185
Unhash in configfs_remove_dir(), while the item is still guaranteed to be
there. A reference obtained just before that stays harmless, as
create_link() rechecks CONFIGFS_USET_DROPPING, already set by
configfs_detach_prep(). Both configfs_unregister_subsystem() paths
d_drop() after detaching, so this only makes rmdir match them.
-
CVE-2026-97944
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
x86/cfi: Fix FineIBT hash offset in cfi_get_func_hash()
The switch of the FineIBT preamble from "subl $hash, %r10d" to the
shorter "subl $hash, %eax" moved the hash immediate from offset 7 to
offset 5 of the preamble. fineibt_preamble_hash was updated to match,
but the open-coded offset in cfi_get_func_hash() was missed and it
still reads the hash at offset 7.
cfi_get_func_hash() is used by the BPF JIT to give a struct_ops
trampoline the CFI hash of the stub function it stands in for. With
FineIBT the trampoline now gets the upper half of the real hash
followed by the first two bytes of the next instruction, so the first
indirect call from the kernel into a struct_ops program,
tcp_init_congestion_control() calling -init() of a BPF congestion
control for example, fails the FineIBT check and the kernel dies with
a CFI failure.
Move the FineIBT preamble template and its offset defines above
cfi_get_func_hash() and use fineibt_preamble_hash there, so every
reader of the preamble shares one definition of its layout. The
CFI_FINEIBT arm is only built with CONFIG_FINEIBT, the only
configuration in which cfi_mode can take that value.
cfi_get_func_arity() does not need the same treatment: the __bhi_args
call whose displacement it reads still ends at the function address.
-
CVE-2026-97940
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix fib6 walker UAF on seq stop
ipv6_route_iter_active() treats a walker in FWS_U at the table root as
already unlinked. fib6_del_route() can move a still-linked walker into
that same state when the current leaf is the last route at the root,
so ipv6_route_native_seq_stop() skips fib6_walker_unlink(). The seq
private object can then be freed while it remains on
net-ipv6.fib6_walkers. A later route deletion walks the dangling list
and uses the freed walker.
Use the list head as membership state and reinitialize it when
unlinking. Keep the existing w->node check so a never-started iterator
with a zeroed private object is not treated as linked.
The same stop helper is used by /proc/net/ipv6_route and by the BPF
ipv6_route iterator. The BPF show path only widens the race.
-
CVE-2026-97939
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ipmr: account multicast table and route memory
A netadmin in a user+net namespace can create many IPv4 and IPv6
multicast routing tables with MRT_TABLE and MRT6_TABLE. Each unseen
id allocates an mr_table via the shared mr_table_alloc(), links it
into the per-net list, and leaves it until netns teardown. Those
objects were not charged to memcg, so the host unreclaimable slab
grows with the table count.
Account mr_table allocations with GFP_KERNEL_ACCOUNT and mark the
IPv4/IPv6 MFC caches SLAB_ACCOUNT. This matches the established
handling of IP addresses, routes and alternate interface names.
Unresolved MFC entries are still allocated from softIRQ with
GFP_ATOMIC and are not charged. They expire after 10 seconds and are
bounded by the socket receive queue; see commit 0079ad8e8dc3
("ipmr: remove hard code cache_resolve_queue_len limit").
-
CVE-2026-97938
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
reboot: fix cad_pid use-after-free race
cad_pid is a single kernel-wide struct pid pointer. proc_do_cad_pid()
reads it and passes it to pid_vnr() without protecting the lifetime of
the referenced struct pid. A concurrent writer can replace cad_pid and
drop the final reference to the old struct pid after the reader has
loaded the pointer but before pid_vnr() has finished dereferencing it,
causing a use-after-free.
kill_cad_pid() has the same lifetime race when it passes cad_pid to
kill_pid().
At the time this issue was reported, an unprivileged user could reach the
sysctl through user and PID namespaces because cad_pid was registered in
pid_table[]. Moving cad_pid back to the global reboot sysctl table
corrected that namespace and permission mismatch, but did not fix the
underlying lifetime race.
Fix this by treating cad_pid as an RCU-protected pointer at both read
sites and by waiting for a grace period before dropping the old reference
on the write side.
call_rcu(&old_pid-rcu, ...) cannot be used here because free_pid()
also queues pid->rcu; queueing the same rcu_head twice can corrupt the
RCU callback list.
Original KASAN crash stack:
kernel/pid.c:545 pid_nr_ns() # reads freed pid->level
kernel/pid.c:556 pid_vnr() # calls pid_nr_ns()
kernel/pid.c:775 proc_do_cad_pid() # calls pid_vnr(cad_pid)
-
CVE-2026-97935
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Set the trace clock before registering the histogram trigger
hist_register_trigger() puts the trigger on the global named_triggers
list in cmd_ops-init(), and only then sets the trace clock:
if (data->cmd_ops->init) {
ret = data->cmd_ops->init(data);
if (ret 0)
goto out;
}
if (hist_data->enable_timestamps) {
ret = tracing_set_clock(file->tr, hist_data->attrs->clock);
if (ret) {
hist_err(tr, HIST_ERR_SET_CLOCK_FAIL, errpos(clock));
goto out;
}
The clock string is not checked anywhere before that call, so a named
trigger using common_timestamp with an unknown clock fails after it has
already become findable. event_hist_trigger_parse() then frees it
without taking it off the list, and the next lookup by name reads the
freed object:
~# cd /sys/kernel/tracing/events/sched/sched_switch
~# echo 'hist:name=foo:keys=common_pid:ts=common_timestamp:clock=bogus' > trigger
bash: echo: write error: Invalid argument
~# echo 'hist:name=foo:keys=common_pid' > trigger
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff88800915d760 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0x900
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 63:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Set the clock before the trigger is registered, so that nothing which
can fail runs after it is published, the way commit 6f86bdeab633
("tracing: Fix bad hist from corrupting named_triggers list") moved the
registration below the rest of the setup.
tracing_set_filter_buffering() is reference counted, so the init failure
path has to drop the reference that the clock block now takes first.
-
CVE-2026-97933
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Take trace_array reference when opening a tracer options file
When a tracer option file is opened, it is passed a descriptor that points
to an element on the trace_array's topts array. This element has
information to find the trace array and other information. It uses this
element to take a reference of the trace_array so that the trace_array
does not get removed while this file is opened.
Unfortunately, there's a race condition where the element itself could be
freed by the removal of the instance the trace_array represents causing a
use-after-free as this element that is used to find the trace_array to
increment its reference counter is also freed when the instance is
removed.
To solve this, add a trace_array_tracer_options_get() helper function that
will take the address of the element that is passed to the open function
by the inode-i_private pointer and search all the trace_arrays under a
lock to find the one that the element's address is in the range of the
trace_arrays topts array elements. When a match happens, that trace_array's
reference would be increased.
Note, there's a race where if an admin was deleting and creating trace
instances at the same time and the memory of the old trace_array's array
matched the memory of the new trace_array that it could in theory open the
option from the wrong trace array. But we do not care because it would be
stupid to perform that kind of action. As long as the only thing that can
happen is that the option from the wrong trace array is used and doesn't
crash the kernel it will only make the user confused. But if they are
doing something stupid like this, they are already confused, so no harm
done.
-
CVE-2026-97930
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usbusx2y: fix in04_last array size mismatch with in04_buf
The in04_last array in struct usx2ydev is declared as char[24], but
in04_buf is allocated as sizeof(struct us428_ctls) which is 21 bytes.
In i_usx2y_in04_int(), when ctl_snapshot_last == -2 (initialization
path):
memcpy(usx2y-in04_last, usx2y->in04_buf, sizeof(usx2y->in04_last));
This copies 24 bytes from a 21-byte slab allocation, reading 3 bytes
past the end of the source object.
Introduce a USX2Y_IN04_SIZE constant defined as sizeof(struct
us428_ctls) and use it consistently for the in04_last array, the
in04_buf allocation, the URB transfer length, and the comparison loop,
replacing the bare 24 and 21 literals throughout.
-
CVE-2026-97927
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ufs: create the root dentry after loading cylinder metadata
ufs_fill_super() installed sb-s_root before it loaded the cylinder
group structures for a writable mount:
sb->s_root = d_make_root(inode);
...
if (!sb_rdonly(sb))
if (!ufs_read_cylinder_structures(sb))
goto failed;
When ufs_read_cylinder_structures() failed, the error path freed the
in-core superblock information and set sb->s_fs_info to NULL while
sb->s_root stayed installed. get_tree_bdev() then reached
deactivate_locked_super(), and because s_root was present,
generic_shutdown_super() called sync_filesystem() and the put_super
operation. Both dereference UFS_SB(sb), which is now NULL, so a mount
that fails only while reading the cylinder groups oopses during
teardown. A crafted image whose first cylinder group cannot be read
reaches this path.
Load the cylinder group metadata first and create the root dentry last,
so the superblock is published to the VFS only once it is fully set up.
ufs_setup_cstotal() and ufs_read_cylinder_structures() take only the
super_block and do not use the root inode, so the reordering is safe.
-
CVE-2026-97922
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Free histogram var refs regardless of how often they are referenced
Using the same variable three or more times in one hist trigger leaks the
variable reference and its strings when the trigger is removed.
commit 656fe2ba85e8 ("tracing: Use hist trigger's var_ref array to destroy
var_refs") made a trigger's var_refs[] array the only owner of a var ref:
destroy_hist_field() returns early for HIST_FIELD_FL_VAR_REF, so the field
expressions never destroy one. One entry, freed once, no count needed.
commit 8bcebc77e85f ("tracing: Fix histogram code when expression has same
var as value") then made repeated references share one object and added a
count of them. Only the increment side exists, since those expressions
still return early and never drop a reference, so __destroy_hist_field()
sees how many references were created rather than how many are left. It
frees when the decremented count is 0 or 1, so two references work and
three or more leak.
Sharing kept one array entry per object, and create_var_ref() searches and
appends within a single trigger, so nothing outside it holds the object.
Removing a trigger whose variables are still referenced is already refused
by check_var_refs() with -EBUSY. Drop the count and free unconditionally.
-
CVE-2026-97918
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Undo the registration when enabling the histogram trigger fails
Commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers
list") described how a trigger that is registered but not on file-triggers
ends up freed while still on the global named_triggers list, and moved the
registration down so that hist_trigger_enable() follows it immediately. One
path still gets there. hist_trigger_enable() adds the trigger and takes it
straight back out when the event cannot be enabled:
list_add_tail_rcu(&data->list, &file->triggers);
update_cond_flag(file);
if (trace_event_trigger_enable_disable(file, 1) 0) {
list_del_rcu(&data->list);
update_cond_flag(file);
ret--;
}
so the list walk in hist_unregister_trigger() matches nothing, test stays
NULL, and the ->free() that would call del_named_trigger() is skipped.
out_unreg falls through to out_free, which frees the trigger anyway:
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff8880091d3160 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0xa00
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 69:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Leave the trigger where hist_unregister_trigger() can find it and let that
undo the registration, which is the only code that knows all of what
cmd_ops->init() took: the named list entry, the hist_pad reference, the
reference on the trigger a named histogram is shared with, and the copied
cmd_ops. It also pairs the failed trace_event_trigger_enable_disable(),
whose sm_ref and buffered event reference are otherwise left behind.
Since ->free() releases trigger_data and, for a trigger that does not share
its histogram, hist_data with it, out_unreg can no longer fall through to
out_free. For a trigger that does share, hist_register_trigger() has
already destroyed the caller's hist_data, so the fall-through was reading
freed memory there as well.
Move the enable_timestamps check in hist_unregister_trigger() above the
->free() call for the same reason: hist_data does not outlive it once the
trigger being removed is the one that owns it.
-
CVE-2026-97914
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Fix ethosu_job_open() return value
A WARN_ON() returns a 0 or 1, not the original negative errno. Just drop
the WARN_ON() as the FD open will pass the return code to userspace and
there's only one possible source of the error (drm_sched_entity_init()).