-
CVE-2026-97938
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
reboot: fix cad_pid use-after-free race
cad_pid is a single kernel-wide struct pid pointer. proc_do_cad_pid()
reads it and passes it to pid_vnr() without protecting the lifetime of
the referenced struct pid. A concurrent writer can replace cad_pid and
drop the final reference to the old struct pid after the reader has
loaded the pointer but before pid_vnr() has finished dereferencing it,
causing a use-after-free.
kill_cad_pid() has the same lifetime race when it passes cad_pid to
kill_pid().
At the time this issue was reported, an unprivileged user could reach the
sysctl through user and PID namespaces because cad_pid was registered in
pid_table[]. Moving cad_pid back to the global reboot sysctl table
corrected that namespace and permission mismatch, but did not fix the
underlying lifetime race.
Fix this by treating cad_pid as an RCU-protected pointer at both read
sites and by waiting for a grace period before dropping the old reference
on the write side.
call_rcu(&old_pid-rcu, ...) cannot be used here because free_pid()
also queues pid->rcu; queueing the same rcu_head twice can corrupt the
RCU callback list.
Original KASAN crash stack:
kernel/pid.c:545 pid_nr_ns() # reads freed pid->level
kernel/pid.c:556 pid_vnr() # calls pid_nr_ns()
kernel/pid.c:775 proc_do_cad_pid() # calls pid_vnr(cad_pid)
-
CVE-2026-97935
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Set the trace clock before registering the histogram trigger
hist_register_trigger() puts the trigger on the global named_triggers
list in cmd_ops-init(), and only then sets the trace clock:
if (data->cmd_ops->init) {
ret = data->cmd_ops->init(data);
if (ret 0)
goto out;
}
if (hist_data->enable_timestamps) {
ret = tracing_set_clock(file->tr, hist_data->attrs->clock);
if (ret) {
hist_err(tr, HIST_ERR_SET_CLOCK_FAIL, errpos(clock));
goto out;
}
The clock string is not checked anywhere before that call, so a named
trigger using common_timestamp with an unknown clock fails after it has
already become findable. event_hist_trigger_parse() then frees it
without taking it off the list, and the next lookup by name reads the
freed object:
~# cd /sys/kernel/tracing/events/sched/sched_switch
~# echo 'hist:name=foo:keys=common_pid:ts=common_timestamp:clock=bogus' > trigger
bash: echo: write error: Invalid argument
~# echo 'hist:name=foo:keys=common_pid' > trigger
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff88800915d760 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0x900
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 63:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Set the clock before the trigger is registered, so that nothing which
can fail runs after it is published, the way commit 6f86bdeab633
("tracing: Fix bad hist from corrupting named_triggers list") moved the
registration below the rest of the setup.
tracing_set_filter_buffering() is reference counted, so the init failure
path has to drop the reference that the clock block now takes first.
-
CVE-2026-97933
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Take trace_array reference when opening a tracer options file
When a tracer option file is opened, it is passed a descriptor that points
to an element on the trace_array's topts array. This element has
information to find the trace array and other information. It uses this
element to take a reference of the trace_array so that the trace_array
does not get removed while this file is opened.
Unfortunately, there's a race condition where the element itself could be
freed by the removal of the instance the trace_array represents causing a
use-after-free as this element that is used to find the trace_array to
increment its reference counter is also freed when the instance is
removed.
To solve this, add a trace_array_tracer_options_get() helper function that
will take the address of the element that is passed to the open function
by the inode-i_private pointer and search all the trace_arrays under a
lock to find the one that the element's address is in the range of the
trace_arrays topts array elements. When a match happens, that trace_array's
reference would be increased.
Note, there's a race where if an admin was deleting and creating trace
instances at the same time and the memory of the old trace_array's array
matched the memory of the new trace_array that it could in theory open the
option from the wrong trace array. But we do not care because it would be
stupid to perform that kind of action. As long as the only thing that can
happen is that the option from the wrong trace array is used and doesn't
crash the kernel it will only make the user confused. But if they are
doing something stupid like this, they are already confused, so no harm
done.
-
CVE-2026-97930
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usbusx2y: fix in04_last array size mismatch with in04_buf
The in04_last array in struct usx2ydev is declared as char[24], but
in04_buf is allocated as sizeof(struct us428_ctls) which is 21 bytes.
In i_usx2y_in04_int(), when ctl_snapshot_last == -2 (initialization
path):
memcpy(usx2y-in04_last, usx2y->in04_buf, sizeof(usx2y->in04_last));
This copies 24 bytes from a 21-byte slab allocation, reading 3 bytes
past the end of the source object.
Introduce a USX2Y_IN04_SIZE constant defined as sizeof(struct
us428_ctls) and use it consistently for the in04_last array, the
in04_buf allocation, the URB transfer length, and the comparison loop,
replacing the bare 24 and 21 literals throughout.
-
CVE-2026-97927
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ufs: create the root dentry after loading cylinder metadata
ufs_fill_super() installed sb-s_root before it loaded the cylinder
group structures for a writable mount:
sb->s_root = d_make_root(inode);
...
if (!sb_rdonly(sb))
if (!ufs_read_cylinder_structures(sb))
goto failed;
When ufs_read_cylinder_structures() failed, the error path freed the
in-core superblock information and set sb->s_fs_info to NULL while
sb->s_root stayed installed. get_tree_bdev() then reached
deactivate_locked_super(), and because s_root was present,
generic_shutdown_super() called sync_filesystem() and the put_super
operation. Both dereference UFS_SB(sb), which is now NULL, so a mount
that fails only while reading the cylinder groups oopses during
teardown. A crafted image whose first cylinder group cannot be read
reaches this path.
Load the cylinder group metadata first and create the root dentry last,
so the superblock is published to the VFS only once it is fully set up.
ufs_setup_cstotal() and ufs_read_cylinder_structures() take only the
super_block and do not use the root inode, so the reordering is safe.
-
CVE-2026-97922
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Free histogram var refs regardless of how often they are referenced
Using the same variable three or more times in one hist trigger leaks the
variable reference and its strings when the trigger is removed.
commit 656fe2ba85e8 ("tracing: Use hist trigger's var_ref array to destroy
var_refs") made a trigger's var_refs[] array the only owner of a var ref:
destroy_hist_field() returns early for HIST_FIELD_FL_VAR_REF, so the field
expressions never destroy one. One entry, freed once, no count needed.
commit 8bcebc77e85f ("tracing: Fix histogram code when expression has same
var as value") then made repeated references share one object and added a
count of them. Only the increment side exists, since those expressions
still return early and never drop a reference, so __destroy_hist_field()
sees how many references were created rather than how many are left. It
frees when the decremented count is 0 or 1, so two references work and
three or more leak.
Sharing kept one array entry per object, and create_var_ref() searches and
appends within a single trigger, so nothing outside it holds the object.
Removing a trigger whose variables are still referenced is already refused
by check_var_refs() with -EBUSY. Drop the count and free unconditionally.
-
CVE-2026-97918
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
tracing: Undo the registration when enabling the histogram trigger fails
Commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers
list") described how a trigger that is registered but not on file-triggers
ends up freed while still on the global named_triggers list, and moved the
registration down so that hist_trigger_enable() follows it immediately. One
path still gets there. hist_trigger_enable() adds the trigger and takes it
straight back out when the event cannot be enabled:
list_add_tail_rcu(&data->list, &file->triggers);
update_cond_flag(file);
if (trace_event_trigger_enable_disable(file, 1) 0) {
list_del_rcu(&data->list);
update_cond_flag(file);
ret--;
}
so the list walk in hist_unregister_trigger() matches nothing, test stays
NULL, and the ->free() that would call del_named_trigger() is skipped.
out_unreg falls through to out_free, which frees the trigger anyway:
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff8880091d3160 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0xa00
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 69:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Leave the trigger where hist_unregister_trigger() can find it and let that
undo the registration, which is the only code that knows all of what
cmd_ops->init() took: the named list entry, the hist_pad reference, the
reference on the trigger a named histogram is shared with, and the copied
cmd_ops. It also pairs the failed trace_event_trigger_enable_disable(),
whose sm_ref and buffered event reference are otherwise left behind.
Since ->free() releases trigger_data and, for a trigger that does not share
its histogram, hist_data with it, out_unreg can no longer fall through to
out_free. For a trigger that does share, hist_register_trigger() has
already destroyed the caller's hist_data, so the fall-through was reading
freed memory there as well.
Move the enable_timestamps check in hist_unregister_trigger() above the
->free() call for the same reason: hist_data does not outlive it once the
trigger being removed is the one that owns it.
-
CVE-2026-97914
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Fix ethosu_job_open() return value
A WARN_ON() returns a 0 or 1, not the original negative errno. Just drop
the WARN_ON() as the FD open will pass the return code to userspace and
there's only one possible source of the error (drm_sched_entity_init()).
-
CVE-2026-97908
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev
The command and ACL RPMsg endpoints store struct btqcomsmd as their
callback private data. The receive callbacks dereference btq-hdev
without taking an hci_dev reference.
The current teardown order frees the hci_dev before destroying the RPMsg
endpoints in both the hci_register_dev() error path and the driver remove
path. If WCNSS delivers data in that window, the endpoint callback can
run with an already freed hci_dev and pass it to the Bluetooth core.
For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears
the callback under the channel recv_lock. The receive path holds the same
lock while invoking the callback, so destroying the endpoints first both
prevents new callbacks and serializes with any callback already running.
Destroy the command and ACL endpoints before hci_free_dev(). Keep
hci_unregister_dev() first during remove so the HCI core stops issuing
operations before the transport endpoints are shut down. In the full
registration-error cleanup path, return directly after freeing the hci_dev
to avoid falling through to the partial-construction labels and destroying
the endpoints twice.
-
CVE-2026-97885
•
published on September 25, 2026
A flaw has been found in mathurvishal CloudClassroom-PHP-Project up to 5dadec098bfbbf3300d60c3494db3fb95b66e7be. Affected is an unknown function of the file updatefaculty.php. This manipulation of the argument fid causes sql injection. The attack may be initiated remotely. The exploit has been published and may be used. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-97881
•
published on November 10, 2026
The embedded OpenEJB HTTP server does not restrict static resource paths to the configured resource directories. A remote unauthenticated attacker can read arbitrary files accessible to the server process. Users are recommended to block network access to the embedded HTTP server from untrusted clients, or to migrate to the Tomcat based TomEE distributions.
-
CVE-2026-97880
•
published on November 10, 2026
The embedded OpenEJB HTTP server dispatches some requests to REST endpoints configured for HTTP Basic authentication without verifying credentials. A remote unauthenticated attacker can invoke protected resources, bypassing authentication. Only deployments that use the embedded HTTP server with Basic authentication are affected. Users are recommended to block network access to the embedded HTTP server from untrusted clients, or to migrate to the Tomcat based TomEE distributions.
-
CVE-2026-97876
•
published on October 2, 2026
A local attacker with control over GRUB's configuration can bypass lockdown restrictions when booting with Secure Boot and load an unsigned GRUB module, while GRUB continues to report lockdown is enabled.
The vulnerability is caused by insufficient validation of the MMIO base address passed to the GRUB serial command. GRUB does not validate that the base address corresponds to a UART device, rather than being an arbitrary memory address. This allows an attacker to trick GRUB into writing non-arbitrary data at an attacker-controlled address, including resetting the grub_file_verifiers list in a way that disables the subsequent verification of loaded modules.
-
CVE-2026-97869
•
published on September 25, 2026
A flaw has been found in langchain4j up to 1.5.3-beta10/1.11.10-beta18/1.18.1-beta27. This vulnerability affects the function AgenticScopeSerializer.fromJson of the file AgenticScopeJsonSerializationIT.java of the component LangChain4j-agentic. This manipulation causes deserialization. Remote exploitation of the attack is possible. The attack's complexity is rated as high. It is stated that the exploitability is difficult. The exploit has been published and may be used. Upgrading to version 1.5.3-beta11, 1.11.10-beta19 and 1.18.1-beta28 is able to resolve this issue. Upgrading the affected component is advised. The project maintainer kindly explains: "The issue was reported to us privately on 23 July 2026 and fixed in releases published on 29 July 2026. It is tracked as GHSA-gmwr-7wmf-mrjm. Exploitation requires an application to have enabled AgenticScope persistence, which is opt-in, and an attacker who can already write to that store. All maintained release lines have been patched."
-
CVE-2026-97866
•
published on September 25, 2026
A weakness has been identified in Zhonglun CloudPOS 3.0. Affected by this vulnerability is an unknown functionality of the file Program.cs of the component Automatic Update. Executing a manipulation of the argument version/url/packagekey/package name can lead to channel accessible by non-endpoint. The attack can be launched remotely. Attacks of this nature are highly complex. The exploitation appears to be difficult. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-97864
•
published on September 25, 2026
A vulnerability has been found in GibbonEdu Gibbon up to 30.0.01. The affected element is the function makeBlock of the file modules/Planner/units_add_blockAjax.php of the component Unit Planner. The manipulation of the argument gibbonUnitBlockID/mode leads to missing authentication. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 31.0.00 is sufficient to fix this issue. The identifier of the patch is 07e719368eae8dfb4e22e19424ceab6074164ebc. It is recommended to upgrade the affected component.
-
CVE-2026-97863
•
published on September 25, 2026
The cisco_firesight_manager_ACL_rule_export module in misp-modules generates a shell script (.sh) that authenticates to and calls the Cisco fireSIGHT Manager API. The module interpolates configuration values (IP address, login, password, domain ID, policy ID) and MISP attribute values (destination IPs, URLs, event info comments) directly into single-quoted shell string assignments without any escaping or sanitization. Because the values are placed inside single-quoted shell strings, any value containing a single-quote character (e.g., a crafted ip-dst or url attribute value submitted to MISP) breaks out of the quoting context, allowing an attacker to inject arbitrary shell commands into the exported script. A security analyst who subsequently executes the generated .sh file unmodified would run the injected commands with their own privileges, potentially exposing fireSIGHT Manager credentials, modifying ACL rules, or compromising the analyst workstation. Additionally, the module contained a secondary defect where the variable 'config' was only assigned inside a conditional block but referenced unconditionally afterward, causing a NameError (denial of service) when the request payload lacked a 'config' key. The vulnerability requires the attacker to have the ability to submit MISP events or attributes containing a single-quote character and the victim to execute the exported script. No authentication bypass is required beyond standard MISP event-submission privileges.
-
CVE-2026-97845
•
published on November 12, 2026
An uncontrolled recursion vulnerability has been discovered in the Qt QXmlSimpleReader XML parsing functionality of the Qt 5 Core Compatibility APIs module (Qt 6) and the Qt XML module (Qt 5).
-
CVE-2026-97843
•
published on October 13, 2026
Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network.
-
CVE-2026-97837
•
published on October 13, 2026
Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network.