-
CVE-2026-97683
•
published on November 13, 2026
IBM Cyber Fraud 1.0.0 through 1.1.0 could allow a local attacker to bypass security restrictions due to a missing or misconfigured security context.
-
CVE-2026-97678
•
published on October 6, 2026
IBM Langflow OSS 1.0.0 through 1.12.2 could allow a remote authenticated attacker to execute arbitrary code due to improper input validation.
-
CVE-2026-97674
•
published on October 6, 2026
IBM Langflow OSS 1.0.0 through 1.12.2 could allow a remote authenticated attacker to execute arbitrary OS commands due to improper neutralization of special elements used in an OS command ('Code Injection'), aka improper control of code generation.
-
CVE-2026-97670
•
published on October 10, 2026
The Avada (Fusion) Builder plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 7.16.1. This is due to the plugin not properly verifying authorization before dispatching a WordPress action hook whose name is taken from an attacker-supplied form-field value (via the notification email_message [field] placeholder and the {action_hook,...} dynamic-data token; the 3.16.1 trust gate is_content_request_supplied() only inspects $_POST['args']/$_GET['args'], never the $_POST['formData'] the public form-submit endpoint parses). This makes it possible for unauthenticated attackers to invoke arbitrary WordPress action hooks (multiple per request), causing state changes up to permanent, irreversible destruction of site content: a verified unauthenticated request permanently deleted trashed posts, pages, and comments via the core wp_scheduled_delete action. Other non-deny-listed hooks extend the impact to denial of service (e.g. wp_maybe_auto_update) and, where vulnerable third-party handlers are installed, further privileged writes. The same unauthenticated dynamic-data pipeline additionally exposes a blind arbitrary user/post-meta read; the read result is delivered only to the site owner and is not attacker-exfiltrable through the plugin's own email/response paths. Exploitation requires a published Avada form with AJAX submission and a notification whose email_message template includes an [all_fields] or explicit [field] placeholder - the default form configuration.
-
CVE-2026-97665
•
published on October 15, 2026
A missing authorization check in Nexus Repository 3's NuGet Components API upload path allows an account holding only repository read and browse privileges to upload and persist NuGet symbol packages (.snupkg) to a hosted repository, bypassing the write-permission check enforced for ordinary package uploads. Exploitation requires a hosted NuGet repository with Symbol Server enabled. If anonymous access is enabled, the built-in anonymous user holds read and browse privileges across all repositories by default, so this precondition can also be met without an authenticated account.
-
CVE-2026-97652
•
published on October 2, 2026
The WP Statistics – Simple, privacy-friendly Google Analytics alternative plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via REQUEST_URI Query-Parameter Key in all versions up to, and including, 14.16.14 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.
-
CVE-2026-97647
•
published on September 25, 2026
A security vulnerability has been detected in ningzichun student-management-system up to 98760f5711cf6dc8b4adca53a9e207ca49b02ebf. This impacts an unknown function of the file user/editLog.php. Such manipulation of the argument sid/addtime/type/reason/detail/logdate leads to authorization bypass. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet.
-
CVE-2026-97645
•
published on October 30, 2026
The Gravity Forms plugin for WordPress is vulnerable to Stored Cross-Site Scripting via List Field in all versions up to, and including, 3.1.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful exploitation requires the administrator to click the injected link in the entry detail view and confirm a dialog, which triggers the admin JavaScript bundle's delegated data-dialog-callback handler to invoke the attacker-supplied function reference.
-
CVE-2026-97643
•
published on October 10, 2026
The GiveWP – Donation Plugin and Fundraising Platform plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's `givewp_campaign_grid` shortcode in versions up to, and including, 4.17.0 This is due to insufficient input sanitization and output escaping on user supplied shortcode attributes (`filter_by`, `layout`, `sort_by`, `order_by`) in the CampaignGridShortcode::parseAttributes() function combined with the render template emitting `json_encode($attributes)` inside a single-quoted HTML attribute without esc_attr() — json_encode() does not escape single quotes by default, so a `'` in an attribute value breaks out of the enclosing attribute. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
-
CVE-2026-97642
•
published on November 6, 2026
The Wp Parsidate plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the calendar Gutenberg block's 'theme' attribute in versions up to, and including, 6.4. This is due to insufficient input sanitization and output escaping on the block attribute value which is concatenated directly into an HTML class attribute in the printCalendar() function without esc_attr(). This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
-
CVE-2026-97637
•
published on October 2, 2026
The JSON API Auth plugin for WordPress is vulnerable to Authentication Bypass via Cached Session Cookie Disclosure in all versions up to, and including, 3.1.2. The vulnerability exists because the required PI-Media/json-api parent plugin caches controller dispatch results in transients keyed solely by URI and query string, ignoring HTTP method and POST body; this causes the `generate_auth_cookie()` endpoint — which embeds a live WordPress `logged_in` cookie produced by `wp_generate_auth_cookie()` directly in its JSON response body — to serve that cached authenticated response to any subsequent unauthenticated GET request to the same URI. This makes it possible for unauthenticated attackers to retrieve a valid Administrator `logged_in` session cookie from the cached response and use it to fully authenticate as the site Administrator, including via the same plugin's `get_currentuserinfo` endpoint and any cookie-authenticated controller action. Exploitation requires the PI-Media/json-api parent plugin to be installed and active with the Auth controller enabled, and a legitimate Administrator must have POSTed to `/api/auth/generate_auth_cookie/` within the preceding 24-hour cache TTL; the nominal HTTPS enforcement gate present in `Auth.php` is trivially bypassed by supplying `insecure=cool` as a request parameter.
-
CVE-2026-97630
•
published on October 10, 2026
The FV Flowplayer Video Player plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Unquoted popup Shortcode Attribute in all versions up to, and including, 7.5.54.7212 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful exploitation requires the profile_videos_enable_bio option to be enabled, as script execution occurs on the author bio/archive page where the profile-video shortcode is rendered.
-
CVE-2026-97627
•
published on October 20, 2026
Hidden functionality issue exists in Multiple DVRs (Digital Video Recorders) provided by Atsumi Electric Co., Ltd. A user who can log in to the product with the administrator privilege may execute arbitrary OS commands.
-
CVE-2026-97615
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: use option bits for CFM/MRP frame handlers
CFM and MRP register a global br_frame_type whose hlist_node is linked
into the per-bridge frame_type_list when the first MEP/MRP instance is
created. Enabling the protocol on multiple bridges therefore inserts the
same node into multiple lists. Unregistering it on one bridge then
corrupts list state belonging to another.
These handlers can only be installed once per bridge, and they are
uncommon. Track their per-bridge enable state with net_bridge option
bits, which already live on the Rx hot cache line, and dispatch the
matching handler directly from the receive path. Check both bits
together first as an unlikely case.
Remove the generic frame_type_list and br_frame_type helpers, which
have had no other users since CFM and MRP were added. That shrinks
struct net_bridge by 8 bytes and drops the list walk from the fast
path. When neither protocol is compiled in, BR_CFM_MRP_OPTS is 0 and
the compiler prunes the branch.
-
CVE-2026-97605
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
erofs: preserve LZMA decoders on resize failure
The pool-resize path frees each stream's old decoder before allocating
its replacement. If an allocation fails after some streams have already
been replaced, the failed stream is put back on the list with state ==
NULL. z_erofs_lzma_max_dictsize is still advanced as if the whole
pool had been resized.
An existing LZMA mount can select the broken stream and pass
NULL to xz_dec_microlzma_reset(). A retry at the same size also
skip another resize attempt. Since the global maximum was advanced,
thus, the invalid state is left unrepaired.
Allocate each replacement before freeing the old decoder, temporarily
retaining one old decoder during allocation. Stop at the first failure
and advance z_erofs_lzma_max_dictsize only after all streams satisfy
the request.
Record each stream's dictionary capacity so retries can skip streams
already enlarged before a partial failure.
-
CVE-2026-97603
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
idpf: disable DIM work before freeing q_vectors
idpf never drains the Tx/Rx DIM works before freeing the memory they
live in. tx_dim and rx_dim are embedded in struct idpf_q_vector, they
are queued from the NAPI poll via net_dim(), and idpf_vport_intr_rel()
ends with kfree(rsrc-q_vectors). Nothing in the driver cancels them.
idpf_tx_dim_work() and idpf_rx_dim_work() then run on freed memory:
idpf_vport_intr_write_itr() writes the ITR register through
q_vector->intr_reg.tx_itr / rx_itr, void __iomem pointers loaded out of
the freed q_vector. No configuration is needed to get there --
IDPF_ITR_IS_DYNAMIC() is defined as (itr_mode) and idpf_vport_alloc()
initialises both modes to IDPF_ITR_DYNAMIC.
Draining after idpf_vport_intr_napi_dis_all() is not enough on its own.
idpf_net_dim() is called from inside the
"if (napi_complete_done(napi, work_done))" branch of the poll, and
napi_complete_done() has already cleared NAPIF_STATE_SCHED by then.
napi_disable_locked() waits only while (val & (NAPIF_STATE_SCHED |
NAPIF_STATE_NPSVC)), so napi_disable() can return while the poll tail is
still queueing the work, and a plain cancel_work_sync() would be
re-armed behind the drain.
Use disable_work_sync(): schedule_work() on a work with a non-zero
disable count is dropped by clear_pending_if_disabled() before
__queue_work() is reached.
Move idpf_init_dim() to idpf_vport_intr_alloc() so the works are
initialised on every path that can reach the drain -- the three
"goto intr_deinit" sites between idpf_vport_intr_init() and
idpf_vport_intr_ena() get there without the enable side having run.
Nothing re-enables them: rsrc->q_vectors is freed on every exit from
idpf_vport_open() and on every idpf_vport_stop(), so the count dies with
the object.
It is a race, not a deterministic failure -- net_dim() only schedules
once DIM_NEVENTS events have accumulated and the profile index changes.
A KASAN ifup/ifdown loop under load is the way to see it.
-
CVE-2026-97602
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
inet: frags: invalidate queues before flushing them
fqdir_pre_exit() flushes the skbs from incomplete queues without
changing their completion state. A fragment which found a queue before
high_thresh was cleared can then acquire the queue lock and reuse stale
reassembly metadata. A queue concurrently killed after fqdir-dead is
set can instead become INET_FRAG_COMPLETE|INET_FRAG_HASH_DEAD while
still holding its old skbs; skipping it because it is complete leaves
those references behind until asynchronous fqdir teardown.
For IPv6, stale metadata can make ip6_frag_reasm() use the old
nhoffset with a new skb and access memory out of bounds. The resulting
heap corruption can be leveraged for local privilege escalation when
unprivileged network namespaces are available. Unflushed fragments can
also keep conntrack references alive after the conntrack per-net
cleanup point.
Kill each incomplete queue, then flush every queue still owned by the
dying rhashtable. HASH_DEAD identifies that ownership, while complete
queues without it are already owned by another destroy path and must be
left alone. Releasing a timer reference removed by inet_frag_kill() is
deferred to inet_frag_putn(), after the queue lock is dropped.
KASAN report:
BUG: KASAN: slab-out-of-bounds in ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2))
Write of size 1 at addr ff110001039c6e00 by task poc/771
Call Trace:
? ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2))
ipv6_frag_rcv (net/ipv6/reassembly.c:289 (discriminator 2) net/ipv6/reassembly.c:229 (discriminator 2) net/ipv6/reassembly.c:391 (discriminator 2))
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:479 (discriminator 5))
ip6_input_finish (net/ipv6/ip6_input.c:534)
ipv6_rcv (include/net/dst.h:480 (discriminator 3) net/ipv6/ip6_input.c:119 (discriminator 3) net/ipv6/ip6_input.c:109 (discriminator 3) include/linux/netfilter.h:325 (discriminator 3) include/linux/netfilter.h:319 (discriminator 3) net/ipv6/ip6_input.c:351 (discriminator 3))
packet_sendmsg (net/packet/af_packet.c:3110 net/packet/af_packet.c:3142)
__x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880)
The buggy address belongs to the object at ff110001039c6b40
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 0 bytes to the right of
allocated 704-byte region [ff110001039c6b40, ff110001039c6e00)
BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1))
Read of size 1 at addr ff110001039c6e08 by task poc/771
Call Trace:
? ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1))
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:423 (discriminator 1))
ip6_input_finish (net/ipv6/ip6_input.c:534)
ipv6_rcv (include/net/dst.h:480 (discriminator 3) net/ipv6/ip6_input.c:119 (discriminator 3) net/ipv6/ip6_input.c:109 (discriminator 3) include/linux/netfilter.h:325 (discriminator 3) include/linux/netfilter.h:319 (discriminator 3) net/ipv6/ip6_input.c:351 (discriminator 3))
packet_sendmsg (net/packet/af_packet.c:3110 net/packet/af_packet.c:3142)
__x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880)
packet_sendmsg (net/packet/af_packet.c:2959 net/packet/af_packet.c:3053 net/packet/af_packet.c:3142)
__x64_sys_sendmmsg (net/socket.c:2883 net/socket.c:2880 net/socket.c:2880)
The buggy address belongs to the object at ff110001039c6b40
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 8 bytes to the right of
allocated 704-byte region [ff110001039c6b40, ff110001039c6e00)
-
CVE-2026-97601
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ieee802154: 6lowpan: fix NULL dereference in lowpan_newlink
TUNSETLINK allows a TUN device to change its link-layer type to
ARPHRD_IEEE802154 without initializing ieee802154_ptr. lowpan_newlink()
checks only the device type before dereferencing the pointer, so an
RTM_NEWLINK request can trigger a NULL pointer dereference.
Reject devices without ieee802154_ptr along with devices of the wrong type.
-
CVE-2026-97595
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
mac802154: fix use-after-free of sdata via queued RX frames
The RX softirq producer ieee802154_subif_frame() queues received beacon
and MAC-command frames onto local-rx_beacon_list / rx_mac_cmd_list and
schedules a process-context worker, storing a raw mac_pkt->sdata (and
skb->dev == sdata->dev) with neither a reference nor any locking:
- the lists have no lock: the softirq producer list_add_tail()s while the
mac_wq worker list_del()s, so sibling interfaces on the same phy corrupt
the list;
- the workers dereference the interface after it may have been freed.
mac802154_rx_mac_cmd_worker() touches mac_pkt->sdata directly, and
mac802154_rx_beacon_worker() -> mac802154_process_beacon() dereferences
skb->dev (== sdata->dev). Removing an interface frees its sdata
(netdev_priv) while a queued frame still points at it, so a later worker
run is a use-after-free.
Reproduced under KASAN by flooding a victim interface with MAC command
frames and removing it (the beacon path is the same class via skb->dev):
BUG: KASAN: slab-use-after-free in mac802154_rx_mac_cmd_worker+0x463/0x630 [mac802154]
Read of size 4 at addr ffff888002f9ea18 by task kworker/u8:1/31
Workqueue: phy0-mac-cmds mac802154_rx_mac_cmd_worker [mac802154]
Call Trace:
mac802154_rx_mac_cmd_worker+0x463/0x630 [mac802154]
process_one_work+0x611/0xe80
worker_thread+0x52e/0xdc0
kthread+0x30c/0x630
ret_from_fork+0x2fd/0x3e0
Fix both lists together:
- add local->rx_lock and take it around every list access: the softirq
producer (plain spin_lock, softirq context) and the workers and flush
(spin_lock_bh, process context);
- pin the interface for the lifetime of a queued frame with
netdev_hold()/netdev_put(), so the worker can safely dereference sdata /
skb->dev even while the interface is being removed;
- dequeue under the lock at the head and loop-drain the whole list in the
workers (they previously processed one frame per run and relied on a
later enqueue to drain the rest);
- drop not-yet-started frames of an interface before it is unregistered,
from ieee802154_if_remove() (after the RCU grace period) and from the
ieee802154_remove_interfaces() loop -- the latter is the whole-phy
teardown path, which does not go through ieee802154_if_remove().
An in-flight worker that already dequeued a frame keeps its own netdev
reference; unregister_netdevice() then waits it out in netdev_run_todo(),
which runs at rtnl_unlock() (rtnl released) and after the interface has
been closed, so it does not pin rtnl. A worker blocked in an association
TX only delays that one interface's unregister (the usual "waiting for %s
to become free"), it does not hold rtnl. netdev_hold() is used for this
reason instead of a cancel_work_sync() under rtnl, which would block on
the worker's unbounded MLME TX wait via ieee802154_sync_queue().
The mac-command worker additionally skips processing for a stopped
interface (ieee802154_sdata_running()), avoiding a needless association
response during teardown.
-
CVE-2026-97590
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix missing scrub of temp buffers with PAES algorithm
In function ctr_paes_do_crypt() there is a buffer used to process
remaining bytes AES_BLOCK_SIZE. This buffer was not scrubbed and
thus could lead to expose of unwanted data. Rework the code to
explicitly scrub the buffer at the end of the function to avoid
exposure of maybe sensitive data.
In function __xts_2keys_prep_param() change the existing scrub to
clean the whole param block instead of just the key field.