-
CVE-2026-97599
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
ieee802154: hwsim: serialize pib updates to fix double-free
hwsim_update_pib() does an unserialized read-swap-free of phy-pib:
pib_old = rtnl_dereference(phy->pib);
...
rcu_assign_pointer(phy->pib, pib);
kfree_rcu(pib_old, rcu);
It assumes the RTNL is held, but ->set_channel is not always called
under it: the mac802154 scan worker changes channels via
drv_set_channel() without the RTNL. Such an update can race an
RTNL-held one on the same phy; both read the same pib_old and both
kfree_rcu() it, double-freeing the object. With SLUB percpu sheaves
batching kfree_rcu(), this surfaces as a KASAN invalid-free in
rcu_free_sheaf().
struct hwsim_phy has no lock for pib. Add one and make the swap atomic
with rcu_replace_pointer() under it, dropping the misleading
rtnl_dereference().
-
CVE-2026-97591
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix handling of EBUSY in PHMAC when req is pushed to crypto engine
When a request is transferred to the engine via
crypto_transfer_hash_request_to_engine() there are two return codes
signaling a successful transfer: EINPROGRESS and EBUSY. However the
correct handling of EBUSY was missing and has been added as a return
code indicating a successful transfer to the crypto engine.
-
CVE-2026-97588
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Map EBUSY to EIO when key conversion fails repeatedly
When hardware persistently returns -EBUSY after exhausting retries,
the error propagates to crypto_finalize_*_request(). The crypto API's
completion wrapper treats -EBUSY as a queueing status and swallows it,
preventing the completion callback from firing. This causes callers
using crypto_wait_req() to block indefinitely.
Translate persistent -EBUSY to -EIO after retry exhaustion to ensure
proper error propagation and callback invocation.
-
CVE-2026-97585
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
afs: Fix double-unmap of directory block
Fix afs_edit_dir_remove() to use a cleanup function to unmap the block
pointed to by afs_dir_iter::block if it's left pointing to something rather
than manually kunmapping the blocks. Manually kunmapping without clearing
iter.blocks can result in a double-kunmap if afs_dir_find_block() is called
twice in a row (which would be the case if the block being modified is not
first in the hash chain).
-
CVE-2026-97581
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: hantro: bound G2 HEVC tile loop to the buffer capacity
prepare_tile_info_buffer() writes one entry per tile into the tile_sizes
DMA buffer, sized for a grid equal to the PPS uAPI array capacity. Use the
bounded v4l2_hevc_pps_num_tile_columns() / v4l2_hevc_pps_num_tile_rows()
helpers so the loops stay inside the buffer.
-
CVE-2026-97580
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
media: rkvdec: bound HEVC tile loops and PPS id to the array capacity
compute_tiles_uniform() and compute_tiles_non_uniform() loop over
num_tile_columns_minus1 + 1 / num_tile_rows_minus1 + 1 entries, and
assemble_hw_pps() writes one COLUMN_WIDTH / ROW_HEIGHT register per tile
and indexes priv_tbl-param_set[] by pic_parameter_set_id, all taken from
the untrusted PPS. Use the bounded v4l2_hevc_pps_num_tile_columns() /
v4l2_hevc_pps_num_tile_rows() helpers for the tile loops, and bail out of
assemble_hw_pps() before indexing priv_tbl->param_set[] with an
out-of-range pic_parameter_set_id, so the writes stay within the hardware
tables.
-
CVE-2026-97574
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Don't free the live ring's TPA state on queue restart failure
bnxt_queue_mem_alloc() shallow copies the live RX ring into the clone:
memcpy(clone, rxr, sizeof(*rxr));
the code currently clears pointers that the clone owns (such as
rx_agg_bmap), but rx_tpa and rx_tpa_idx_map are left pointing at memory
of the live ring that was cloned.
If an allocation failure happens later and the err_free_tpa_info label
is taken, the live ring's memory can be freed while still in use.
Fix this by initializing the clone's pointers to NULL to prevent live
ring state from being freed inadvertently.
-
CVE-2026-97571
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Propagate TPA buffer allocation failures in bnxt_queue_mem_alloc()
bnxt_alloc_one_tpa_info_data() returns -ENOMEM as soon as one allocation
fails. This leaves the remaining rxr-rx_tpa[] entries zeroed.
bnxt_queue_mem_alloc() discards that return value, so the partially
initialized ring is installed by bnxt_queue_start().
Since the agg_id is picked by the hardware and bnxt_alloc_agg_idx maps
it to a SW index in rxr->rx_tpa[], it is possible that an uninitialized
slot can be chosen which would hand a zero DMA address to the device.
Fix this by checking the return value of bnxt_alloc_one_tpa_info_data
and unwinding, freeing the ring buffers.
-
CVE-2026-97570
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Bound SW TPA IDs to prevent crashes
FW supports up to 1024 concurrent TPAs, so the FW TPA ID is in the range
0..1023 (see commit ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for
57500 chips.")). bnxt_alloc_agg_idx is intended to wrap the FW ID down to a
software ID which is used to index rxr-rx_tpa, and to generate a mapping
between FW IDs and the wrapped software ID.
On a 57608 with firmware version 233, the firmware advertises 32
concurrent TPAs. As of the commit under fixes, bp->max_tpa on this NIC
is set to 32.
If the software ID from bnxt_alloc_agg_idx is above 31, this results in
an invalid address being loaded on this line:
tpa_info = &rxr->rx_tpa[agg_id];
because rx_tpa is allocated with only bp->max_tpa (32) entries. Writes
to tpa_info later in the code are out of bounds.
This bug results in a crash at boot:
Oops: general protection fault, kernel NULL pointer dereference 0x8: 0000 [#1] SMP NOPTI
RIP: 0010:bnxt_rx_pkt+0xc0/0x1560
RSP: 0018:ffffc900009b8c78 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000048 RCX: 0000000206682516
RDX: ffffc900009b8db4 RSI: 0000000000000000 RDI: 01ffffff038fe1c0
RBP: ffffc9006e687480 R08: ffffc9006e687000 R09: 0000000000003048
R10: 0000000000000480 R11: ffff8881c6083900 R12: 0000000006682516
R13: ffff8881c6095400 R14: 0000000000000016 R15: ffff8881c6b66680
FS: 0000000000000000(0000) GS:ffff88fef3c77000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc8bda40584 CR3: 000000807c812001 CR4: 0000000008772ef0
PKRU: 55555554
Call Trace:
IRQ>
? __netif_receive_skb_list_core+0x1ca/0x250
__bnxt_poll_work+0x152/0x280
bnxt_poll_p5+0x1cd/0x480
__napi_poll+0x30/0x180
net_rx_action+0x20b/0x3b0
? note_gp_changes+0x53/0xe0
? tick_setup_sched_timer+0x180/0x180
? __napi_schedule+0x9a/0xb0
? bnxt_msix+0x24/0x30
handle_softirqs+0xdd/0x2c0
__irq_exit_rcu.llvm.3171231171502365008+0x47/0xf0
common_interrupt+0x85/0x90
asm_common_interrupt+0x22/0x40
This stack trace is from a crash triggered when an out of bounds rx_tpa
is dereferenced. The invalid write mentioned above is silent in this
particular crash.
Fix this by allocating rx_tpa with bp->max_tpa rounded up to the next
power of 2 (bp->max_tpa_roundup_size) entries and masking the FW TPA ID
with that size, so the wrapped ID can never index past the end of the
array.
-
CVE-2026-97567
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
mptcp: prevent race between disconnect() and rtx
Sashiko noted that the two event can race, leading to inconsistent
status. Prevent the race using the synchronous timer stop operation.
-
CVE-2026-97566
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: kernel: drop pending ADD_ADDR when removing ID0
The in-kernel MPTCP path manager can leave a stale ADD_ADDR announcement
entry alive when removing the id 0 endpoint. This happens because the id 0
removal path does not tear down pending announcements, unlike the non-zero
id path.
When the PM later reselects id 0 after adding another signal endpoint, it
finds the stale anno_list entry and hits WARN_ON_ONCE(mptcp_pm_is_kernel())
in mptcp_pm_announced_alloc().
Root cause: asymmetry between removal paths.
- Non-zero id path: mptcp_nl_remove_subflow_and_signal_addr() calls
mptcp_pm_remove_announced() to clean up.
- Id 0 path: mptcp_nl_remove_id_zero_address() skips cleanup entirely.
Fix by making the id 0 path symmetric: call mptcp_pm_announced_remove()
and decrement add_addr_signaled before queuing the RM_ADDR.
Subtle detail: signal endpoints are stored in anno_list with port 0, but
msk_local carries the connection's local port. In other words, entries
linked to ID0 paths should have port == 0. A follow-up patch will ensure
that. mptcp_pm_announced_remove() uses use_port=true for comparison. So
clear the port before the lookup.
-
CVE-2026-97565
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject short READ responses in CIFSSMBRead()
CIFSSMBRead() reads DataLengthHigh, DataLength and DataOffset out of
the READ_RSP returned by the server without first checking that a
whole READ_RSP was actually received. The length of the response is
recorded in rsp_iov.iov_len, but nothing constrains it to be at least
read_rsp_size before those fields are dereferenced.
A malicious or compromised SMB1 server can return a response shorter
than the READ_RSP header, so that parsing the header itself reads past
the end of the receive buffer. SMB1 is not negotiated by default;
reaching this code requires an explicit vers=1.0 mount.
Reject the response unless it is at least read_rsp_size bytes long.
-
CVE-2026-97562
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb: client: pin DFS superblock in iterator callback
tcon_super_cb() stores a raw superblock pointer, but __cifs_get_super()
takes its active reference only after iterate_supers_type() has dropped
s_umount and its passive reference. Concurrent DFS automount expiry can
therefore free the superblock before cifs_sb_active() uses it.
A deterministic KASAN test reproduces the race as:
BUG: KASAN: slab-use-after-free in cifs_sb_active+0x77/0x80
The same test passes with this change applied.
Take the active reference in the callback while iterate_supers_type()
still holds s_umount shared. cifs_put_tcp_super() remains the matching
release.
-
CVE-2026-97559
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fail DACL rewrite when the new DACL exceeds 64K
replace_sids_and_copy_aces() and set_chmod_dacl() accumulate the size of
the DACL they build in a u16. That accumulator can wrap.
validate_dacl() caps num_aces at (dacl_size - sizeof(struct smb_acl)) /
20, i.e. 3276 for a maximally sized DACL, while each rewritten ACE can
grow to sizeof(struct smb_ace) (76 bytes) once its SID is replaced with
one carrying SID_MAX_SUB_AUTHORITIES sub-authorities. The worst case is
therefore sizeof(struct smb_acl) + 3276 * 76 = 248984 bytes, far beyond
what a u16 can hold. A wraparound is reached with 863 ACEs.
After the wraparound, ndacl_ptr-size becomes meaningless and the offset
will point anywhere in the ACE array. As a result, we will see
corruption of the DACL, which then gets sent to the server. This is not
an out-of-bounds write as the allocation now covers the worst-case
expansion, so writes will always go into the buffer.
Adjust the code to use a u32 internally and return -EOVERFLOW in the
overflow case. The operation must be refused, because a DACL can only
hold 2^16-1 bytes on the wire and larger DACLs cannot be represented.
set_chmod_dacl() carries the same pattern and is fixed the same way. It
only wraps once the source DACL comes within roughly 380 bytes of the
64K ceiling, but the failure mode is identical.
-
CVE-2026-97556
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid leaking refcount when cifs_sb_tlink() fails
cifs_oplock_break() takes over the reference that
cifs_queue_oplock_break() acquired when it queued the work, and drops it
with _cifsFileInfo_put() once the break has been processed.
Only in setups with "-o multiuser", cifs_sb_tlink() may fail, at which
point cifs_oplock_break() returns without putting the file reference,
mirroring the reference leak we already fixed in the companion patch to
cifs_queue_oplock_break().
This would trigger a crash due to busy inodes on the next unmount:
BUG: Dentry ... still in use (1) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
Drop the reference on that path as well. Doing so before the out label
mirrors the normal path, which also puts the reference before
cifs_done_oplock_break().
Found by Sashiko code review. The failure path was not exercised at
runtime.
-
CVE-2026-97552
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
xfs: initialise error in xfs_defer_finish_one()
xfs_defer_finish_one() declares error without an initialiser and only
assigns it inside the loop over dfp-dfp_work. When that list is empty
the loop body never runs, control falls through to the "Done with the
dfp, free it" path, and the function returns an indeterminate value.
An item-less pending item reaches this through xfs_defer_add_barrier(),
which xfs_reap_ag_blocks() uses on any CONFIG_XFS_ONLINE_REPAIR kernel.
xfs_defer_finish_noroll() treats any non-EAGAIN return as fatal, so a
non-zero stack value turns a successful barrier into a
SHUTDOWN_CORRUPT_INCORE in the middle of a repair. Zero is the correct
result: reaching the free path means the item loop drained without a
non-zero error.
-
CVE-2026-97544
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
xfs: don't leak dqacct if rhashtable insertion fails
LOLLM observes that xqcheck_mod_live_ino_dqtrx doesn't free the newly
allocated dqa object if rhashtable insertion fails. Fix this leak.
-
CVE-2026-97536
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix use-after-free of qpair work on queue teardown
The response queue MSI-X handler qla2xxx_msix_rsp_q() schedules
qla_do_work() via queue_work(ha-wq, &qpair->q_work). qla_do_work()
dereferences the qpair (vha, rsp) and takes qpair->qp_lock.
During teardown, qla2xxx_delete_qpair() deletes the response queue, which
calls free_irq() in qla25xx_free_rsp_que(), and then frees the queue and
the qpair. free_irq() waits for running hardirq handlers but does not
cancel work already placed on ha->wq. A still-pending q_work then runs
qla_do_work() against the freed qpair and response queue, causing a
use-after-free. This is especially likely during full adapter teardown,
where destroy_workqueue(ha->wq) forces pending work to run after the queue
pairs have been freed.
Flush the work item with cancel_work_sync() in qla25xx_free_rsp_que()
after free_irq() has released the interrupt (so no new work can be
queued) and before the response queue and qpair memory are freed (so the
flushed handler still sees valid memory). Guard on rsp->qpair and ha->wq
to match the INIT_WORK() condition and avoid operating on an
uninitialized work_struct.
-
CVE-2026-97526
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
s390/pai: Support CPU hotplug for PMU PAI
The command 'perf stat -e pai_crypto/CRYPTO_ALL/ -- command'
crashes the kernel when CPUs are hotplug added during that run.
Root cause is the missing allocation of per-CPU data structures
for that new CPU. The allocation is dynamic and the first
event that has task context creates such a structure for
each online CPU. This is not sufficient. CPUs may be offline
during event creation and can be set online during the
perf run time. For example commands
# echo 0 > /sys/devices/system/cpu/cpu1/online
# perf stat -e cycles -i -- stress-ng -t10s --matrix X
# sleep 1
# echo 1 > /sys/devices/system/cpu/cpu1/online
Currently without a CPU hotplug handler, that new CPU has no
per-CPU data infrastructure. The scheduler runs PMU call back
function pai_add() to install the PMU support for that CPU before
the task is being scheduled on that new CPU.
In pai_add() instructions
mp = this_cpu_ptr(pai_root[idx].mapptr);
cpump = mp->mapptr;
return a NULL pointer and the result is a kernel panic as variable
cpump is used inside that function.
Add CPU hotplug support for CPU add and delete and create
the necessary per-CPU data infrastructure during CPU hotplug
add processing. Same for CPU hotplug remove.
This is done when the CPU is offline to ensure the data structures
are available when CPU is made online and tasks are scheduled on it.
[hca@linux.ibm.com: fixup error path in pai_init()]
-
CVE-2026-97525
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Allocate split page tables as kernel page tables
A PTE is allocated directly without going through the standard page table
allocation routines (such as pte_alloc_one_kernel()) when the CPA code
splits a large page (__split_large_page()).
This means the page table constructor is never called nor is the page table
marked as a kernel page table.
The former results in the folio associated with the page table not being
marked as a page table (__pagetable_ctor() is never called thus neither is
__folio_set_pgtable()) nor are statistics updated to reflect
it (lruvec_stat_add_folio() is never called).
The latter issue of failing to mark the page table as a kernel page
table (ptdesc_set_kernel() is never called) is far more problematic.
Since commit:
5ba2f0a15564 ("mm: introduce deferred freeing for kernel page tables")
kernel page table freeing has been batched and since the
subsequent commit:
e37d5a2d60a3 ("iommu/sva: invalidate stale IOTLB entries for kernel address space")
IOTLB cache entries for kernel page tables have been invalidated upon
being freed.
Since split page tables are freed without this invalidation, the IOTLB
can contain stale entries for them.
Resolve the issue by using the ordinary PTE allocation API at split time.
This results in these kernel page tables invoking a page table constructor,
and thus requires a page table destructor.
Destructors are not always present, like for early allocated direct map
page tables). Conditionally call pagetable_dtor_free() if the PG_table
folio flag for the ptdesc is set, otherwise we free the page table via
pagetable_free().
Regardless of which path is taken page tables marked as kernel page tables,
which now includes split page tables, take the correct route through
pagetable_free_kernel().
There is a user-visible side effect in that split page tables will appear
in nr_page_table_pages in /proc/vmstat (as do other kernel page tables
allocated after early boot), however this is a positive change.
This issue started being markedly problematic after commit:
5ba2f0a15564 ("mm: introduce deferred freeing for kernel page tables")
so choose this as the Fixes target.
[ dhansen: rephrase in imperative mood ]