-
CVE-2026-97583
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
afs: Clear stale peer app data after address list changes
afs_fs_probe_fileserver() fetches the current endpoint state under
server-fs_lock, but leaves old_alist as NULL. Consequently,
afs_set_peer_appdata() treats every address list replacement as initial
setup and only binds the new peers; it never unbinds peers removed from
the old list.
An address refresh can therefore proceed as follows. CPU 0 replaces
server S's list and drops Pold without clearing Pold->app_data. The
server destroyer then clears only S's current peers and lets S reach its
RCU callback. After the callback frees S, CPU 1 handles a callback
through an RxRPC connection that still pins Pold, reads Pold->app_data,
and calls afs_use_server() on the freed object.
KASAN reported:
BUG: KASAN: slab-use-after-free in afs_find_server+0x3c/0xa0
Read of size 4 at addr ffff8881013e1af0 by task krxrpcio/7001/74
Call Trace:
afs_find_server+0x3c/0xa0
afs_rx_new_call+0x15c/0x390
rxrpc_new_incoming_call+0x97c/0x1730
rxrpc_input_packet.constprop.0+0xd03/0xec0
rxrpc_io_thread+0x967/0x1640
Allocated by task 93:
afs_lookup_server+0x1a7/0x14c0
afs_alloc_server_list+0x43f/0xb60
afs_create_volume+0x923/0x1490
afs_get_tree+0x1c6/0x10a0
Freed by task 0:
kfree+0x131/0x3c0
rcu_core+0x50a/0x1850
Last potentially related work creation:
__call_rcu_common.constprop.0+0x71/0xa10
afs_put_server+0x213/0x2b0
Preserve old->addresses for the peer app-data update so that removed
peers are cleared before the endpoint state is replaced. Also advance
both cursors when the old and new lists share a peer; activating the
old/new comparison without this would otherwise loop forever on the
shared entry.
-
CVE-2026-97582
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (gpio-fan) Fix use-after-free in alarm work
fan_alarm_irq_handler() queues fan_data-alarm_work, but nothing
cancels it. fan_alarm_notify() dereferences fan_data and its hwmon
device. On unbind, devres frees the interrupt, which only waits for
the handler itself, and then releases the hwmon device and fan_data,
so a pending fan_alarm_notify() can run after those frees.
Replace INIT_WORK() with devm_work_autocancel(), registered before
devm_request_irq(). The devres cleanup then frees the interrupt
first, so no new work can be queued, and cancels the work while
fan_data and the hwmon device are still alive.
This issue was found by an in-house static analysis tool.
-
CVE-2026-97579
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
media: mediatek: vcodec: bound AV1 tile-start copy to the array capacity
vdec_av1_slice_setup_tile() copies tile_cols + 1 / tile_rows + 1 entries
into mi_col_starts[] / mi_row_starts[] from the bitstream tile_info. Bound
the copy to the array capacity.
-
CVE-2026-97577
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: rockchip: reject AV1 frames exceeding the tile capacity
rockchip_vpu981_av1_dec_set_tile_info() indexes the tile group entry
array by tile1 * tile_cols + tile0, reading up to tile_cols * tile_rows
entries, lays out one descriptor per tile in the AV1_MAX_TILES tile_info
buffer, and programs the real tile_cols / tile_rows into the hardware.
The tile group entry control is a dynamic array sized to the number of
entries userspace submitted, independent of tile_cols / tile_rows, so a
frame that claims more tiles than entries reads past the array. A frame
that claims more than AV1_MAX_TILES tiles also leaves the hardware
programmed for more tiles than the descriptor buffer holds.
Reject both in prepare_run(): tile_cols * tile_rows must not exceed the
submitted entry count or AV1_MAX_TILES. The entry count is read via
v4l2_ctrl_find() (ctrl-elems). This mirrors the bound the mediatek AV1
decoder already enforces.
-
CVE-2026-97568
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
mptcp: syncookies: remember the request backup flag
Instead of using an uninitialised bit when copying the info in
subflow_ulp_clone().
To fix this, no need to extend the join_entry structure: backup is
coming from struct mptcp_subflow_request_sock, only one bit. Do the same
here by using one bit for both.
-
CVE-2026-97560
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix one-byte OOB read in smb2_parse_native_symlink()
When parsing a share-root relative native symlink, memcpy copies
smb_target+1 (skipping the leading separator) but uses
strlen(smb_target)+1 as the length, reading one byte past the
allocated buffer.
This fixes the following KASAN splat when accessing an SMB symlink
with a target of '\a\b':
BUG: KASAN: slab-out-of-bounds in smb2_parse_native_symlink+0x4f5/0xca0
Read of size 5 at addr ffff88800878fe21 by task netfsfuzz-execu/1
CPU: 1 UID: 0 PID: 1 Comm: netfsfuzz-execu Tainted: G N
7.2.0-11943-g2709dd5ae32f-dirty #1 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix,
1996)
Call Trace:
TASK
dump_stack_lvl+0x7b/0xa0
print_report+0xd0/0x630
kasan_report+0xe5/0x120
kasan_check_range+0x105/0x1b0
__asan_memcpy+0x23/0x60
smb2_parse_native_symlink+0x4f5/0xca0
parse_reparse_point+0x68a/0x1530
reparse_info_to_fattr+0x752/0xa20
cifs_get_fattr+0x873/0x15b0
cifs_get_inode_info+0xc0/0x310
cifs_lookup+0x308/0xa70
__lookup_slow+0x122/0x2b0
lookup_slow+0x50/0x70
path_lookupat+0x525/0xaf0
filename_lookup+0x1f2/0x550
vfs_statx+0xd1/0x1a0
vfs_fstatat+0x65/0xc0
__do_sys_newfstatat+0x9a/0x120
do_syscall_64+0xdd/0x4a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-
CVE-2026-97554
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid using uninitialized SIDs in cifs_posix_to_fattr()
cifs_posix_to_fattr() ignores the return value of posix_info_parse().
When a malformed POSIX directory entry is encountered (e.g. invalid
SID lengths from an untrusted server), posix_info_parse() returns -1
without populating the 'parsed' struct. The uninitialized stack
memory in parsed.owner and parsed.group is then passed to
sid_to_id(), which processes the garbage bytes and passes them to
request_key() to construct a SID string, potentially leaking kernel
stack contents to the userspace idmap daemon.
Fix this by checking the return value and skipping the SID-to-id
mapping when parsing fails. The remaining fattr fields (timestamps,
mode, etc.) are populated directly from the 'info' pointer so they
are unaffected.
-
CVE-2026-97553
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
xfs: lock the healthmon when inserting unmount event
LOLLM complains that xfs_healthmon_unmount does an unlocked insert of
the unmount event into the health monitor's event list. Fix that.
-
CVE-2026-97548
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
xfs: fix the rtrmap and rtrefcount _maxlevels_ondisk functions
The _maxlevels_ondisk functions are used to compute the size of
in-memory btree cursors for each btree type. Unfortunately, LOLLM
noticed that the rtrmap and rtrefcount versions of these functions
forget to account for the inode root, which means that we could access
beyond the end of the cursor given a sufficiently large btree. Fix
this.
-
CVE-2026-97545
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
xfs: don't leak new_bp if xfs_btree_bload_drop_buf fails
LOLLM observes that in xfs_btree_bload_prep_block,
xfs_btree_bload_drop_buf can hit an IO error if writing the delwri
buffer list to disk fails. In this case, we fail to release new_bp,
which means we lose a locked buffer. Fix that.
-
CVE-2026-97543
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
xfs: destroy seen inode bitmap when we fail to add a dirpath
LOLLM observes a memory leak in xchk_dirtree_create_path if we create
the directory path object but appending the name to the path fails.
When this happens, we don't tear down the (empty) seen inode bitmap.
This is a pretty trivial error, but let's not leave logic bombs.
Do the same for a similar bug in xrep_dirtree_create_adoption_path.
-
CVE-2026-97540
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: don't rely on id table pointer arithmetic
The current code is broken when dynamic ID is involved; in such cases
usb_device_id parameter of probe lives on the heap and the pointer
arithmetic will get an index that is wildly out of bound. Instead of
keeping a side table for additional information, use driver_info field of
the usb_device_id.
The dynamic ID parsing code needs to be updated for this; convert it to
just write to the reserved entry for dynamic ID and remove the weird loop.
-
CVE-2026-97538
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (asus_rog_ryujin) Validate HID report lengths
rog_ryujin_raw_event() parses response headers and payload fields without
first checking that they are present in the received report. A short report
can therefore make the driver consume uninitialized bytes from the HID
transport buffer and expose them as sensor values through sysfs.
Validate the response header and the fields used by each response type
before parsing them.
-
CVE-2026-97537
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix queue teardown NULL dma_free and bitmap locking
qla25xx_free_req_que() and qla25xx_free_rsp_que() have two pre-existing
bugs exposed on the error path of qla25xx_create_{req,rsp}_que():
1. When dma_alloc_coherent() fails during queue creation, the error
path calls the free function with req-ring / rsp->ring still NULL
(from kzalloc). The unconditional dma_free_coherent() with a NULL
cpu_addr is undefined behavior and can panic.
2. The free functions clear req_qid_map / rsp_qid_map under vport_lock,
but the create functions protect the same bitmaps with mq_lock.
This provides no mutual exclusion. Additionally, the create error
path clears the bit and releases mq_lock before calling the free
function, creating a window where another thread can allocate the
same que_id and have its ha->req_q_map entry clobbered by the
subsequent lockless NULL assignment in the free function.
Fix by:
- Guarding dma_free_coherent() with a NULL check on the ring pointer.
- Using mq_lock (the lock held by all creators) in the free functions
to atomically NULL the map entry and clear the bitmap bit.
- Removing the now-redundant clear_bit blocks from the create error
paths since the free functions handle it atomically.
-
CVE-2026-97531
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Skip vport under deletion in report ID acquisition
qla24xx_report_id_acquisition() format-1 handling walks ha-vp_list under
vport_slock, takes a vref_count on the matching vport and calls
qla_update_host_map() to register its port id.
A vport teardown via qla24xx_vport_delete() sets VPORT_DELETE, then
qla24xx_disable_vp() removes the vport from the host_map btree and zeroes
vha->d_id (RESET_AL_PA). The vport is only unlinked from vp_list later,
in qla24xx_deallocate_vp_id(), which clears vp_map[idx] (RESET_VP_IDX)
but does not touch host_map. In the window in between, report ID
acquisition can still find the vport on vp_list and call
qla_update_host_map(); with d_id already zeroed it takes the
btree_insert32() path and re-inserts the dying vport into host_map.
Nothing cleans that entry afterwards, so once scsi_host_put() frees the
vha a later host_map lookup dereferences freed memory.
Skip a vport that has VPORT_DELETE set before taking the reference, so it
is neither re-registered nor scheduled for DPC re-registration. This
mirrors the existing guard in qla2x00_alert_all_vps().
-
CVE-2026-97530
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix soft lockup polling continuation IOCB signature
qla27xx_copy_multiple_pkt() and qla27xx_copy_fpin_pkt() poll
rsp_q-ring_ptr->signature for RESPONSE_PROCESSED (0xDEADDEAD) to decide
whether the next continuation IOCB has arrived, spinning on cpu_relax()
without advancing the ring or decrementing the entry count while it has
not. response_t::signature lives at byte offset 60, but a continuation
IOCB (sts_cont_entry_t / struct sts_cont_entry_ext) carries raw FC frame
payload at that offset (data[56..59]). A received frame whose payload
bytes happen to equal 0xDEADDEAD is therefore misread as "not yet
arrived", and the loop spins forever in interrupt/DPC context, causing a
CPU soft lockup.
The poll is also unnecessary: callers of qla27xx_copy_multiple_pkt()
(PT_LS4_UNSOL and the NVMe purls path) already gate on
qla_chk_cont_iocb_avail(), which guarantees all entry_count IOCBs are
present before copying begins. The sibling helper
__qla_copy_purex_to_buffer() already drops the signature poll and relies
on the entry_type == STATUS_CONT_TYPE guard instead.
Remove the signature busy-wait from both helpers, keeping the entry_type
guard, and gate the FPIN path with qla_chk_cont_iocb_avail() so it defers
and re-processes on the next interrupt once all continuation IOCBs have
arrived, mirroring the ELS_AUTH_ELS and PT_LS4_UNSOL arms. With this the
signature field is never read on a continuation IOCB, eliminating the
payload-aliasing lockup.
-
CVE-2026-97522
•
published on September 25, 2026
In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix bad accounting in __mptcp_subflow_push_pending()
If __subflow_push_pending() errors out we should avoid updating the
copied byte counters, to avoid mismatch push call later on.
-
CVE-2026-97520
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
gfs2: move quota_init qc iterator increment
Move qc++ from the loop body into the for-loop increment
expression in gfs2_quota_init().
This keeps iterator progression explicit and avoids mixing pointer
advance with duplicate-slot handling in the loop body.
-
CVE-2026-97513
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Release m2m_ctx after Instance Removed from List
Possible use after free if IRQ thread manages to obtain spinlock between
m2m_ctx release and wave5_release function removing stream instance from
list of active instances. The IRQ thread looks for the m2m_ctx which is
freed so null pointer dereference occurs.
-
CVE-2026-97509
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Keep XDomain reference during the lifetime of a service
This is needed because we release the service ID in tb_service_release()
and the ID array is owned by the parent XDomain.