-
CVE-2026-97421
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
RDMA/umem: Be careful about boundary conditions in ib_umem_find_best_pgsz()
Several corner cases, especially important on 32 bits:
- umem-iova is u64, the function argument should pass in u64 or
iova will be truncated
- Check that the length is not too large for the iova
- Check that lengths > 4G don't overflow the GENMASK
-
CVE-2026-97418
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
ALSA: es18xx: check control allocation before private data setup
snd_es18xx_mixer() creates controls with snd_ctl_new1() and then stores
bookkeeping pointers or sets private_free before calling snd_ctl_add().
snd_ctl_new1() can return NULL on allocation failure, so those writes
can dereference a NULL control pointer.
Check the returned control pointers before using them and return -ENOMEM
on allocation failure.
-
CVE-2026-97415
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
btrfs: tree-checker: validate names in ROOT_REF and ROOT_BACKREF
ROOT_REF and ROOT_BACKREF items contain a struct btrfs_root_ref followed
by the subvolume name. Several readers assume that this layout is already
valid and then use the on-disk name length directly. A corrupted item can
therefore make those readers address bytes outside the item, and
BTRFS_IOC_GET_SUBVOL_INFO can copy too many bytes into its fixed-size UAPI
name buffer.
Validate ROOT_REF and ROOT_BACKREF items in tree-checker before any reader
uses them. Reject records that do not contain a non-empty name, whose
name_len does not exactly describe the remaining item payload, or whose
name exceeds BTRFS_NAME_LEN.
For BTRFS_IOC_GET_SUBVOL_INFO, copy only the validated on-disk name_len
instead of deriving the copy length from the item size. The ioctl result is
zeroed when allocated. That leaves the existing trailing zero byte
untouched.
-
CVE-2026-97411
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: ibm: emac: mal: fix potential system hang in mal_remove()
napi_disable() is not idempotent and calling it on an already-disabled
or unenabled NAPI context will cause the kernel to spin indefinitely
waiting for the NAPI_STATE_SCHED bit to clear.
In mal_remove(), napi_disable() is called unconditionally. If no MACs were
registered, NAPI was never enabled. Also, if they were registered but
subsequently unregistered, NAPI was already disabled in
mal_unregister_commac(). In either case, calling napi_disable() causes
the kernel to hang upon module removal.
Fix this by only calling napi_disable() in mal_remove() if the commac list
is not empty (which implies NAPI is enabled).
-
CVE-2026-97409
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: Do not cancel requests in io target before it is initialized
A new nvme-fc controller in CONNECTING state sees admin request timeout
schedules ctrl-ioerr_work to abort inflight requests. This ends up
calling __nvme_fc_abort_outstanding_ios() which aborts requests in both
admin and io tagsets. In case fc_ctrl->tag_set was not initialized we
see the warning below. This is because ctrl.queue_count is initialized
early in nvme_fc_alloc_ctrl().
nvme nvme0: NVME-FC{0}: starting error recovery Connectivity Loss
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
lpfc 0000:ab:00.0: queue 0 connect admin queue failed (-6).
you didn't initialize this object before use?
turning off the locking correctness validator.
Workqueue: nvme-reset-wq nvme_fc_ctrl_ioerr_work [nvme_fc]
Call Trace:
TASK>
dump_stack_lvl+0x57/0x80
register_lock_class+0x567/0x580
__lock_acquire+0x330/0xb90
lock_acquire.part.0+0xad/0x210
blk_mq_tagset_busy_iter+0xf9/0xc00
__nvme_fc_abort_outstanding_ios+0x23f/0x320 [nvme_fc]
nvme_fc_ctrl_ioerr_work+0x172/0x210 [nvme_fc]
process_one_work+0x82c/0x1450
worker_thread+0x5ee/0xfd0
kthread+0x3a0/0x750
ret_from_fork+0x439/0x670
ret_from_fork_asm+0x1a/0x30
Update the check in __nvme_fc_abort_outstanding_ios() confirm that io
tagset was created before iterating over busy requests. Also make sure
to cancel ctrl->ioerr_work before removing io tagset.
-
CVE-2026-97408
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: validate connectionless PSM length
Connectionless L2CAP frames carry a two-byte PSM at the start of the
payload. l2cap_recv_frame() currently reads that PSM unconditionally
after validating only the outer L2CAP length.
A malformed connectionless frame with a zero- or one-byte payload can
therefore make the parser read beyond the advertised skb payload and use
tailroom bytes as part of the PSM. A VHCI-backed QEMU reproducer
injected a one-byte connectionless payload and reached the unchecked
read.
Reject connectionless frames that cannot contain the PSM before reading
or pulling it. This preserves all valid connectionless frames while
dropping only structurally incomplete packets.
-
CVE-2026-97404
•
published on September 24, 2026
In OpenStack Zaqar before 22.0.2, WSGI transport mishandles the URL-Signature header. By sending a request with an empty URL-Signature header, an unauthenticated remote attacker who knows a target project's UUID may bypass both Keystone authentication and pre-signed URL verification, resulting in the ability to read, enumerate, create, and delete that project's queues, messages, claims, and subscriptions. By additionally claiming an administrative role, the attacker may also perform administrative operations, such as managing pools and flavors in admin_mode deployments. Only deployments using the WSGI transport with an authentication strategy configured are affected; the websocket transport is not affected.
-
CVE-2026-97398
•
published on October 14, 2026
The FV Flowplayer Video Player plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'synopsis' Shortcode Attribute in all versions up to, and including, 7.5.54.7212 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This requires the 'Parse Vimeo and YouTube links' (parse_comments) option to be enabled and the liststyle attribute set to "season" for the vulnerable code path to be reached.
-
CVE-2026-97395
•
published on September 29, 2026
Apache Polaris allows an authenticated principal with permission to create or update Iceberg table properties to set FileIO client settings such as s3.endpoint in table metadata.
In versions 1.8.0, when Polaris performs server-side Iceberg operations, including commits and purges, it may use those settings to construct its (server-side) FileIO client. If the catalog storage configuration does not override the endpoint, Polaris can send storage requests to a host chosen by the table writer, using credentials scoped to the operation.
This can redirect server-side storage traffic and expose request authentication material to the chosen endpoint. Deployments are affected when table writers are not trusted to configure server-side storage endpoints.
-
CVE-2026-97371
•
published on November 5, 2026
ntopng is a web-based network traffic monitoring application. Prior to 6.7.260721, ndpi_get_custom_category_match writes a four-byte nDPI protocol-category value through a pointer to the two-byte id variable in IpAddress::reloadBlacklist in src/IpAddress.cpp during packet dissection and host initialization. A remote unauthenticated attacker on a monitored network segment can send packets that match custom-category rules, causing stack corruption and denial of service without user interaction. This issue is fixed in version 6.7.260721.
-
CVE-2026-97367
•
published on November 6, 2026
A flaw was found in the Keycloak Account REST API where it incorrectly handles session identification. A malicious client owner can manipulate their own security tokens to point to a different user's active session. This allows the attacker to access and modify the victim's account information, potentially leading to a full account takeover by changing the recovery email and resetting the password.
-
CVE-2026-97366
•
published on September 24, 2026
A security flaw has been discovered in jhen0409 react-native-debugger up to 0.14.0. The impacted element is the function openDevTools of the file electron/window.js of the component Open in Editor Handler. The manipulation of the argument host results in os command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-97365
•
published on September 24, 2026
A vulnerability was determined in chonkie-inc littrs 0.6.1/0.6.2. Impacted is the function Sandbox::mount of the file crates/littrs/src/lib.rs. Executing a manipulation of the argument relative can lead to path traversal. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.
-
CVE-2026-97362
•
published on September 24, 2026
HFS2 version 2.4.0 and earlier contains a denial of service vulnerability that allows unauthenticated attackers to cause a complete and persistent loss of availability by sending a single crafted request. Attackers can trigger a hung serving thread that enters a busy loop, rendering the entire file server unresponsive to all clients without self-recovery until an operator manually restarts the service.
-
CVE-2026-97359
•
published on September 24, 2026
HFS2 version 2.4.0 and earlier contains a template injection vulnerability in the multipart upload handler that allows unauthenticated attackers to achieve remote code execution by embedding malicious template syntax in a filename. Attackers can craft a filename containing a closing template quoting sequence followed by an exec macro, which bypasses the authorization check in the dispatcher to execute arbitrary commands on the underlying host system.
-
CVE-2026-97356
•
published on November 5, 2026
External Control of File Name or Path vulnerability in the ViewFile component of Label Manager in Apache OFBiz 24.09.07 on all platforms allows an authenticated user holding only the LABEL_MANAGER_VIEW permission to read arbitrary properties and xml files on the server, including the generated JWT signing key, enabling forgery of an authenticated administrator session, via the fileName parameter of a ViewFile request.
Users are recommended to upgrade to version 24.09.08, which fixes this issue.
-
CVE-2026-97348
•
published on October 10, 2026
The SiteOrigin Widgets Bundle plugin for WordPress is vulnerable to Directory Traversal in all versions up to, and including, 1.74.3 via the get_instance_css function. This makes it possible for authenticated attackers, with contributor-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information. The widget's normal update()/sanitize_field_input() pipeline — which would reject non-hex color values — is bypassed entirely because the [siteorigin_widget] shortcode handler calls $the_widget-widget() directly on the attacker-supplied decoded JSON instance.
-
CVE-2026-97338
•
published on October 2, 2026
The Download Manager plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Display Name in all versions up to, and including, 3.3.70 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This requires the [wpdm_edit_profile] shortcode to be present on a front-end page accessible to Subscriber-level users, who can then submit a multiply entity-encoded payload via the display name field to bypass sanitization.
-
CVE-2026-97335
•
published on September 28, 2026
Incorrect authorization in the custom storage volume creation endpoint in Canonical LXD versions 5.0.0 and later (fixed in 5.0.10, 5.21.8 and 6.10) on Linux allows an authenticated client with permission to create custom volumes in a project to copy, and so read, any custom storage volume from any other project on the server, including its snapshots and configuration. The client does this with a crafted request that sets a source volume and source.project but omits source.type.
-
CVE-2026-97334
•
published on October 13, 2026
The network messaging layer contained improper handling of highly compressed data affecting service availability. Software customers upgrade to resolved maintenance release. Update all Commvault installations, including CommServe server, Web Server, Command Center, MediaAgents, clients, and HyperScale.