-
CVE-2026-95756
•
published on November 3, 2026
A command injection vulnerability exists in the API of HPE Networking Fabric Composer and could be exploited by an authenticated remote attacker with administrative privileges if certain preconditions outside of the attacker's control are met. Successful exploitation could allow an attacker to gain elevated privileges on the underlying operating system.
-
CVE-2026-95743
•
published on November 3, 2026
Local privilege escalation vulnerabilities exist in the underlying operating system of HPE Networking Fabric Composer. Successful exploitation could allow a local attacker with low privileges to gain elevated privileges on the affected system.
-
CVE-2026-95742
•
published on November 3, 2026
An arbitrary file write vulnerability exists in the underlying operating system of HPE Networking Fabric Composer. Successful exploitation could allow an authenticated local attacker to create or overwrite arbitrary files on the affected system with elevated privileges.
-
CVE-2026-95730
•
published on November 3, 2026
A buffer overflow vulnerability exists in HPE Networking VIA that could allow an authenticated low-privileged local user to cause a denial of service. Successful exploitation could allow an attacker to interrupt the normal operation of the affected system.
-
CVE-2026-95726
•
published on November 3, 2026
A buffer overflow vulnerability in HPE Networking VIA could allow an unauthenticated remote attacker to conduct a denial of service attack. Successful exploitation could allow an attacker to interrupt the normal operation of the affected client.
-
CVE-2026-95725
•
published on November 3, 2026
A command injection vulnerability exists in the VIA client for Linux. Successful exploitation could allow a low-privileged local attacker to execute arbitrary commands with elevated privileges on the affected system.
-
CVE-2026-95724
•
published on November 3, 2026
An improper certificate validation vulnerability exists in HPE Networking Virtual Intranet Access (VIA). Successful exploitation could allow an unauthenticated remote attacker to bypass authentication mechanisms, leading to the possible disclosure of sensitive information.
-
CVE-2026-95718
•
published on October 22, 2026
An authentication bypass vulnerability in the PAPI protocol of AOS-8 could allow an unauthenticated remote attacker to circumvent existing authentication controls. Successful exploitation could allow an attacker to make limited unauthorized modifications to certain settings of the affected system.
-
CVE-2026-95717
•
published on October 22, 2026
A stored cross-site scripting (XSS) vulnerability exists in the web-based management interface of AOS that could allow an authenticated remote attacker with high privileges to inject malicious scripts. Successful exploitation could allow an attacker to execute arbitrary script code in the context of another authenticated user's browser session.
-
CVE-2026-95716
•
published on October 22, 2026
An authentication bypass in the PAPI protocol of AOS-10 allows an unauthenticated adjacent attacker to circumvent existing authentication controls. Successful exploitation allows an attacker to change the state of certain settings of a vulnerable system.
-
CVE-2026-95711
•
published on October 22, 2026
An authentication bypass vulnerability in the web-based management interface of AOS-10 could allow an unauthenticated adjacent attacker to circumvent existing authentication controls and run arbitrary commands on the underlying host if certain preconditions outside of the attacker's control are met. Successful exploitation of this vulnerability could allow an attacker to execute arbitrary commands on the underlying operating system.
-
CVE-2026-95697
•
published on September 22, 2026
MISP contains an authorization flaw in the Organisation model's captureOrg method. When the $force parameter is set to true, the method unconditionally overwrites organization metadata fields without verifying that the invoking user holds sufficient privileges. A user with a sharing group (SG) editor role can trigger this code path, allowing them to modify organization metadata that should be restricted to site administrators or users with sync permissions.
According to the commit message, this could lead to blueprint-based sharing group manipulation, meaning an attacker with SG editor access could alter organizational attributes in ways that influence how sharing groups and blueprints behave across the MISP instance.
The vulnerability requires an authenticated user with at least SG editor privileges and network access to the MISP web interface. The impact is primarily on the integrity of organization records and, potentially, on the integrity of sharing group configurations derived from those records.
-
CVE-2026-95696
•
published on October 13, 2026
IBM WebSphere Application Server - Liberty 20.0.0.12 through 26.0.0.10 could allow a remote attacker to cause a denial of service due to an uncaught exception.
-
CVE-2026-95687
•
published on October 1, 2026
The WPC Shop as a Customer for WooCommerce plugin for WordPress is vulnerable to privilege escalation via account takeover in all versions up to, and including, 2.0.0 This is due to the plugin not properly validating the target user's role prior to issuing a new authentication session, allowing an authenticated attacker to log in as any WordPress Administrator by directly supplying an Administrator's user ID to the wpcsa_login endpoint and receiving a full Administrator session cookie without supplying the Administrator's password. This makes it possible for authenticated attackers to perform a direct session takeover, gaining full Administrator-level access to the site.
-
CVE-2026-95686
•
published on October 16, 2026
The Opti-Behavior – Self-Hosted Heatmaps, Session Recordings, Funnels, A/B Testing & Smart Insights plugin for WordPress is vulnerable to Stored DOM-Based Cross-Site Scripting via the 'targetUrl' parameter in all versions up to, and including, 1.9.2.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The ingest endpoint is gated only by a nonce that is publicly emitted to every anonymous visitor on tracked pages via optiBehaviorHeatmapConfig.nonce, meaning no account or authentication of any kind is required to write the malicious payload.
-
CVE-2026-95680
•
published on October 13, 2026
IBM WebSphere Application Server 8.5, and 9.0 could allow an authenticated attacker to bypass authorization leading to administrative impersonation across the cell.
-
CVE-2026-95676
•
published on September 23, 2026
A missing/improper authentication vulnerability in the WatchGuard AuthPoint Gateway's LDAP Sync first-factor authentication allows a remote attacker to bypass single-factor password verification under non-default operating conditions. Additional authentication factors still apply.
-
CVE-2026-95675
•
published on September 22, 2026
D-Link DAP-1360 firmware version 6.14 and earlier contains an unauthenticated remote code execution vulnerability that allows remote attackers to execute arbitrary commands as root by sending crafted requests to the device's web management interface without valid credentials. Attackers can fully compromise the device to persistently modify its configuration and use it as a pivot point into the local network.
-
CVE-2026-95674
•
published on September 22, 2026
In MISP, the queryEnrichment method in EventsController.php accepted a module name parameter and iterated over the list of enabled modules to find a match. If the specified module was not present in the enabled modules list, the code silently continued processing using default parameters (format set to 'simplified' and no module-specific configuration applied) rather than rejecting the request. This allowed an authenticated user to trigger enrichment or analysis processing through a module that was not explicitly enabled or available on the instance, bypassing the intended module availability controls. The lack of validation meant that module names outside the enabled set were not rejected, potentially exposing functionality or data processing paths that the administrator had not authorized for use.
-
CVE-2026-95664
•
published on October 26, 2026
Improper Neutralization of Special Elements used in an Expression Language Statement ('Expression Language Injection') vulnerability in Apache Camel AWS2-s3 component.
This issue affects Apache Camel: from 4.8.0 before 4.18.5, from 4.19.0 before 4.22.2.
For the object it uploads, reads or deletes, the camel-aws2-s3 producer takes the key from the CamelAwsS3Key message header and falls back to the keyName option configured on the endpoint only when that header is absent. Since 4.8.0, AWS2S3Utils.determineKey() also passed the resulting value to the Simple language whenever it contained ${ or $simple{, so that a route could use a dynamic key, and the evaluation applied to a value taken from the header as well as to the configured option. The header is not route configuration, however: the aws2-s3 consumer sets CamelAwsS3Key on the exchanges it creates to the key of the object it read, that is, the name of the object in the bucket. In a route that does nothing more than consume from one aws2-s3 endpoint and produce to another, the name of each consumed object therefore reached the producer, and a name containing either marker was evaluated as an expression, although the route author never asked for any evaluation, and configuring keyName on the producer did not prevent it, because the header took precedence. A key that a route copied into the header from other message content was evaluated in the same way. Anyone able to choose the name of an object in a bucket that such a route consumes, typically a principal allowed to upload to that bucket, could therefore have Simple expressions of their choosing evaluated in the Camel process. The Simple language can read JVM system properties, environment variables and configuration properties, which commonly carry credentials, and, where camel-bean is on the classpath, invoke methods on beans in the registry. The evaluated result became the key the producer used, so reading a value back additionally required the ability to see object names in the destination bucket, while a method invocation took effect without it; together with the need to name an object in a consumed bucket, this is why the severity is assessed medium. The bucket name went through the same evaluation, but the consumer only ever places the bucket configured on its own endpoint in a bucket header, never a value derived from a remote object, so the bucket name was not reachable in this way. Releases before 4.8.0 used the key from the header as given and are not affected.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.8.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. After upgrading, a key or bucket name supplied through a message header is used literally, so a route that put an unevaluated Simple expression in the CamelAwsS3Key or CamelAwsS3OverrideBucketName header must evaluate it in the route instead, for example with setHeader and simple(), or configure it as the keyName or bucketName option of the endpoint. For deployments that cannot upgrade immediately, do not let a key derived from an object name or from other untrusted message content reach an aws2-s3 producer unchecked: in routes that pass exchanges from an aws2-s3 consumer to an aws2-s3 producer, either remove the CamelAwsS3Key header before the producer with removeHeader(“CamelAwsS3Key”), so that the keyName configured on the endpoint is used, or reject exchanges whose CamelAwsS3Key header contains ${ or $simple{. Configuring keyName alone is not a workaround, because the header takes precedence over it. As defence in depth, allow only trusted principals to write to buckets that Camel routes consume.