-
CVE-2026-93861
•
published on October 8, 2026
In OpenStack Mistral through 23.0.0, the workflow membership API lets a project that has accepted a share of another project's private workflow create a further membership naming a third project. The new membership row is created with its project_id defaulted to the accepting project rather than the original workflow owner, and thus the owner can neither see nor delete it. The third project can accept this membership (that it had not actually been granted by the owner), and then read and execute the owner's private workflow; only the accepting (not the owning) project can later revoke that access.
-
CVE-2026-93860
•
published on October 8, 2026
In OpenStack Mistral through 23.0.0, the /v2/maintenance API controller clears the request context and calls the maintenance service directly without any policy enforcement. Any holder of a valid Mistral token, regardless of assigned role, can read and change the service's cluster-wide maintenance state. Setting the state to PAUSED stops processing of new workflow and execution objects across all tenant projects until an operator restores it.
-
CVE-2026-93858
•
published on October 8, 2026
In OpenStack Mistral through 23.0.0, the std.ssh_proxied action passes a caller-supplied proxy_command value directly to paramiko.ProxyCommand() before any SSH connection to a gateway or target host is attempted. An authenticated project member can use the standard action-execution API to submit an arbitrary local command as proxy_command; paramiko starts that command as a subprocess on the executor host under the executor's own service account, independent of whether the SSH connection itself ever succeeds. Only Mistral deployments that permit the std.ssh_proxied action, the default configuration, are affected.
-
CVE-2026-93853
•
published on September 29, 2026
Unverified ownership in Barman snapshot backup deletion allows a principal who can write the backup catalog to cause Barman to delete unrelated cloud snapshots. When a snapshot backup is deleted, either explicitly or by retention policy enforcement, Barman reads the snapshot identifiers from the backup.info file and passes them to the cloud provider's delete API using Barman's own credentials, without verifying that the snapshots belong to that backup. An attacker who can overwrite backup.info but lacks snapshot delete permissions can substitute the identifiers of other snapshots, causing Barman to delete any snapshot its cloud identity can reach on AWS, Microsoft Azure, or Google Cloud. Exploitation requires a deployment where the principal that writes the backup catalog is separate from the identity Barman uses to delete snapshots. Barman versions from 3.4.0 (Google Cloud), 3.6.0 (Azure), and 3.7.0 (AWS) up to and including 3.20.0 are affected. The issue is fixed in Barman 3.20.1.
-
CVE-2026-93851
•
published on October 28, 2026
Mattermost versions 11.9.x = 11.9.1, 11.8.x <= 11.8.5, 11.7.x <= 11.7.10 fail to validate the target post ID in the Agents plugin's mention reminder component, which allows an authenticated user who can post in a channel visible to a system administrator to cause the administrator's browser to send an unintended API request, resulting in replacement of an installed plugin and code execution on the server, via a crafted post containing a forged mention reminder that the administrator clicks. Mattermost Advisory ID: MMSA-2026-00742
-
CVE-2026-93840
•
published on September 18, 2026
vLLM before 0.29.0 validates allowed_token_ids against tokenizer length instead of model output logits width in SamplingParams._validate_allowed_token_ids(). Attackers can supply token IDs above the output vocabulary that pass validation, causing LogitBiasState to corrupt GPU logits state and allow concurrent requests to sample tokens outside their allowlists.
-
CVE-2026-93825
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
spi: Add NULL check for spi_get_device_id() in spi_get_device_match_data()
Prevent NULL pointer dereference when spi_get_device_id() returns NULL,
which can happen when using driver_override without matching SPI ID entry.
-
CVE-2026-93824
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
tls: reject the combination of TLS and sockmap
TLS and sockmap (BPF psock) integration hides a lot of latent bugs.
Bugs which may be more or less relevant for real users but they
are definitely exploitable.
We could not find anyone actively using this integration so let's
reject this config. Adding a TLS socket to a sockmap was already
rejected by sk_psock_init() through the inet_csk_has_ulp() check.
We need to reject the attempts to configure the TLS keys (rather
than adding the ULP itself) because checking prior to the ULP
installation is tricky without risking a race with sockmap getting
added in parallel (sockmap does not hold the socket lock).
This patch is a minimal rejection of the feature. Subsequent patch
in the series will do a light dead code removal. Full cleanup would
require a major rewrite of the Tx path, we don't need skmsg any more.
-
CVE-2026-93823
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Let driver decide buffer size at AMDKFD_IOC_GET_DMABUF_INFO ioctl
amdkfd driver needs allocate buffer to return bo metadata to user space. The
buffer size is controlled by user currently. It is a potential security issue
that hostile value (e.g. 2 GiB) lets any render-group user trigger order-MAX
allocation/OOM in kernel context.
This patch first finds bo metadata size. If the size is smaller than user
provided value drive can safely allocate buffer in kernel space and copy to
user space buffer. If not, driver will let user know, not allocate and copy.
User will redo with new buffer in user space.
This patch lets driver decide buffer allocation size to avoid potential hostile
size from user space.
(cherry picked from commit f54ce9e8cbd3abe0eda3a285f54dc4f572fe589a)
-
CVE-2026-93820
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
PCI: rockchip: Protect root bus removal with rescan lock
Hold the pci_rescan_remove_lock lock while stopping and removing a root bus
to avoid racing with concurrent rescan or hotplug operations triggered via
sysfs. Such races may lead to use-after-free issues or system crashes.
[bhelgaas: commit log]
-
CVE-2026-93809
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: flush pending RCU callbacks on module unload
Call rcu_barrier() in module exit to wait for outstanding call_rcu() callbacks
before freeing module text, preventing late callback execution in freed memory.
BUG: unable to handle page fault for address: ffffffffc1d59c40
PGD 6a12067 P4D 6a12067 PUD 6a14067 PMD 13698b067 PTE 0
Oops: 0010 [#1] SMP NOPTI
RIP: 0010:0xffffffffc1d59c40
Code: Unable to access opcode bytes at RIP 0xffffffffc1d59c16.
RSP: 0018:ffffc900198c0f28 EFLAGS: 00010286
RAX: ffffffffc1d59c40 RBX: ffff897c7d6b61c0 RCX: ffff88826aff4590
RDX: ffff8884d8b35490 RSI: ffffc900198c0f30 RDI: ffff88812af67290
RBP: 000000000000000a (DONE segment entries) R08: 0000000000000000 R09: 0000000000000100
R10: 0000000000000000 R11: ffffffff82a06100 R12: ffff88811a4e3700
R13: 0000000000000000 R14: ffff897c7d6b6270 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff897c7d680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc1d59c16 CR3: 00000104a980a001 CR4: 0000000002770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
IRQ
? rcu_do_batch+0x163/0x450
? rcu_core+0x177/0x1c0
? __do_softirq+0xc1/0x280
? asm_call_irq_on_stack+0xf/0x20
? do_softirq_own_stack+0x37/0x50
? irq_exit_rcu+0xc4/0x100
? sysvec_apic_timer_interrupt+0x36/0x80
? asm_sysvec_apic_timer_interrupt+0x12/0x20
? cpuidle_enter_state+0xd4/0x360
? cpuidle_enter+0x29/0x40
? cpuidle_idle_call+0x108/0x1a0
? do_idle+0x77/0xf0
? cpu_startup_entry+0x19/0x20
? secondary_startup_64_no_verify+0xbf/0xcb
(cherry picked from commit feaa5039f6c12acc9aa934c2d45dcd251a12c69f)
-
CVE-2026-93808
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: caiaq: validate EP1 reply lengths
usb_ep1_command_reply_dispatch() uses buf[0] as a command byte and then
reads command-specific fixed items from the same URB buffer. Several
paths use buf + 1, buf[1], buf[2], or buf + 3 without first proving that
urb-actual_length contains those bytes.
Add per-command length checks, use a payload length derived from the
bytes after the command byte for the control-state copy, and reject short
analog input payloads before the input helper reads fixed offsets from
the EP1 reply.
-
CVE-2026-93805
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate rx/tx MLME callback frame lengths before access
cfg80211_rx_mlme_mgmt() and cfg80211_tx_mlme_mgmt() call tracepoints
before rejecting frames shorter than the frame-control field. After
that, they only require len = 2 before dispatching into subtype
handlers that assume their fixed fields are present.
The frames that trip this are not shorter than 2 bytes; they are short
relative to their subtype. mwifiex is a concrete in-tree example on the
length side: mwifiex_process_mgmt_packet() only requires a 4-address
ieee80211_hdr plus the 2-byte firmware length prefix before handing the
frame to cfg80211_rx_mlme_mgmt(). After stripping the length prefix and
removing addr4, pkt_len can be exactly 24: a bare 3-address management
header with no reason-code body. The existing WARN_ON(len 2) does not
fire on such a frame, and cfg80211_process_deauth() then reads
u.deauth.reason_code as a two-byte access starting at offset 24,
immediately past the 24-byte buffer.
Add a frame-control length gate, then validate each subtype's minimum
frame size in an if/else-if chain that mirrors the dispatch logic. Trace
only after the frame is known to be well-formed.
Side effects of this change:
- The WARN_ON(len < 2) is dropped. It only guarded the frame_control
read, never the subtype fixed fields, and it does not fire on the
frames that actually trigger the out-of-bounds read (which are >= 2).
The len >= 2 check is kept as the guard before dereferencing
frame_control, but without the warning: these are exported callbacks
and a malformed frame from a driver should be dropped silently rather
than backtraced.
- cfg80211_tx_mlme_mgmt() previously routed every non-deauth subtype
through disassociation handling; it now silently ignores unrecognised
subtypes.
-
CVE-2026-93801
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb/client: zero-initialize stack-allocated cifs_open_info_data
Stack-allocated cifs_open_info_data may contain random data.
This can make some fields have wrong value if they are not set later.
-
CVE-2026-93800
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix use-after-free on reloc root after error in insert_dirty_subvol()
If during relocation we fail in insert_dirty_subvol() because
btrfs_update_reloc_root() returned an error, we will leave a root's
reloc_root field pointing to a reloc root that was freed instead of NULL,
resulting later in a use-after-free, or double free attempt during
unmount.
The sequence of steps is this:
1) During relocation the call to btrfs_update_reloc_root() in
insert_dirty_subvol() fails, so insert_dirty_subvol() returns the
error to merge_reloc_root() without adding the root to the list
rc-dirty_subvol_roots;
2) Then merge_reloc_root() aborts the current transaction because
insert_dirty_subvol() returned an error;
3) Up the call chain, merge_reloc_roots() gets the error, adds the
reloc root for root X to the local reloc_roots list and jumps to the
'out' label, where it calls free_reloc_roots() to free all the reloc
roots in the local reloc_roots list. This frees the reloc root for
root X;
4) We go up the call chain to relocate_block_group() which calls
clean_dirty_subvols() to go over dirty roots and set their
->reloc_root field to NULL, but root X is not in the dirty_subvol_roots
list, so its ->reloc_root still points to a reloc root;
5) Relocation finishes, with an error and a transaction abort, but the
->reloc_root field for root X still points to the reloc root that was
freed in step 3;
6) When unmounting the fs we end up calling:
btrfs_free_fs_roots()
btrfs_drop_and_free_fs_root()
--> calls btrfs_put_root() against root X's ->reloc_root
which is not NULL and points to the already freed
reloc root in step 4 above
Resulting in a use-after-free to a double free attempt.
Syzbot reported this with the following dmesg/syslog:
[ 106.004389][ T5339] BTRFS error (device loop0 state A): Transaction aborted (error -5)
[ 106.014266][ T5339] BTRFS: error (device loop0 state A) in merge_reloc_root:1655: errno=-5 IO failure
[ 106.021891][ T1061] BTRFS error (device loop0 state A): error while writing out transaction: -5
[ 106.026964][ T1061] BTRFS warning (device loop0 state A): Skipping commit of aborted transaction.
[ 106.033807][ T5340] BTRFS error (device loop0 state A): bdev /dev/loop0 errs: wr 3, rd 0, flush 0, corrupt 0, gen 0
[ 106.039265][ T1061] BTRFS: error (device loop0 state A) in cleanup_transaction:2067: errno=-5 IO failure
[ 106.044382][ T5339] BTRFS info (device loop0 state EA): forced readonly
[ 106.074329][ T5339] BTRFS: error (device loop0 state EA) in merge_reloc_roots:1887: errno=-5 IO failure
[ 106.081004][ T5356] BTRFS info (device loop0 state EA): scrub: started on devid 1
[ 106.085611][ T5339] BTRFS info (device loop0 state EA): balance: ended with status: -30
[ 106.089517][ T5356] BTRFS info (device loop0 state EA): scrub: not finished on devid 1 with status: -30
[ 106.662365][ T5338] BTRFS info (device loop0 state EA): last unmount of filesystem 3a375e4e-b156-4d76-a2ad-16e198ce1409
[ 106.682946][ T5338] ==================================================================
[ 106.686574][ T5338] BUG: KASAN: slab-use-after-free in btrfs_put_root+0x2f/0x250
[ 106.690090][ T5338] Write of size 4 at addr ffff88803f978630 by task syz.0.0/5338
[ 106.693173][ T5338]
[ 106.694279][ T5338] CPU: 0 UID: 0 PID: 5338 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full)
[ 106.694293][ T5338] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 106.694300][ T5338] Call Trace:
[ 106.694308][ T5338] TASK>
[ 106.694314][ T5338] dump_stack_lvl+0xe8/0x150
[ 106.694331][ T5338] print_address_description+0x55/0x1e0
[ 106.694343][ T5338] ? btrfs_put_root+0x2f/0x250
[ 106.694358][ T5338] print_report+0x58/0x70
[ 106.
---truncated---
-
CVE-2026-93796
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: pcie: null RX pointers after free
When iwl_pcie_tx_init() fails after RX init, nic init unwinds via
iwl_pcie_rx_free().
The freed RX members stayed non-NULL on the live transport object,
so later teardown or retry could touch stale RX state.
Set rx_pool, global_table, rxq, and alloc_page to NULL after free
to make repeated cleanup and retry paths safe.
-
CVE-2026-93781
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Do not block on tag allocation in scsi_eh_lock_door()
scsi_eh_lock_door() is called from scsi_restart_operations() while the
host is still in the SHOST_RECOVERY state, i.e. before the host is
switched back to SHOST_RUNNING and scsi_run_host_queues() restarts the
queues. It allocates a request via scsi_alloc_request() with no flags,
so blk_mq_get_tag() may block waiting for a free sched tag when all tags
are already in use.
Those tags can be held by commands that were just requeued by
scsi_eh_flush_done_q() during error handling. Such commands cannot be
dispatched until the host leaves SHOST_RECOVERY and
scsi_run_host_queues() is called - which only happens *after*
scsi_eh_lock_door() returns.
This forms a circular dependency:
- scsi_eh_lock_door(), running in the SCSI error handler thread, waits
for a sched tag held by a requeued command;
- the requeued command cannot complete and release its sched tag until
the error handler thread leaves scsi_restart_operations() and restart
the queues.
For devices with a single driver tag (e.g. USB storage) it is a
guaranteed deadlock and I/O that can never be submitted. This problem
has also been reproduced in our environment.
Locking the door is a best-effort operation, and scsi_eh_lock_door()
already returns silently when the request allocation fails. Pass
BLK_MQ_REQ_NOWAIT to scsi_alloc_request() so the allocation fails
instead of blocking when no tag is available. This breaks the circular
dependency and allows the error handler to finish restarting the queues,
after which the pending commands are dispatched normally.
-
CVE-2026-93774
•
published on September 23, 2026
Unauthenticated Cross Site Scripting (XSS) in WP Photo Album Plus = 9.3.02.002 versions.
-
CVE-2026-93769
•
published on September 23, 2026
HumHub 1.18.5 is affected by a stored cross-site scripting (XSS) vulnerability that allows any user holding the delegated, non-system-administrator Manage Users permission (admin_manage_users) to inject persistent HTML/JavaScript into a Profile Field Category title.
-
CVE-2026-93755
•
published on November 7, 2026
The Happyforms plugin for WordPress is vulnerable to Stored Cross-Site Scripting via spoofable client IP headers in versions up to, and including, 1.38.9. This is due to the happyforms_get_client_ip() function reading raw HTTP_CLIENT_IP and HTTP_X_FORWARDED_FOR request headers without any validation or sanitization, storing the value as post meta ('client_ip') via update_post_meta() during unauthenticated form submissions, and later echoing it in the admin submission edit screen's Details metabox without output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user (typically an administrator reviewing a submission) accesses an injected page.