-
CVE-2026-93682
•
published on September 25, 2026
When the HTTP stream wrapper follows a redirect and the response carries a Location header with an empty value, the redirect code reads one byte past the end of the heap buffer holding the location. The value of that out-of-bounds byte decides which redirect target is built, so a malicious server controls whether the client is sent to the host root or to the current directory.
-
CVE-2026-93677
•
published on October 7, 2026
IBM Langflow OSS 1.0.0 through 1.12.2 could allow a remote authenticated attacker to obtain sensitive information due to exposure of sensitive information to an unauthorized actor.
-
CVE-2026-93676
•
published on September 18, 2026
xdg-dbus-proxy incorrectly filters D-Bus broadcast messages, bypassing configured path, interface, and member restrictions. This allows a sandboxed Flatpak application to intercept broadcast signals on the D-Bus session bus and AT-SPI bus that should be restricted, potentially exposing sensitive information to unauthorized applications.
-
CVE-2026-93675
•
published on October 7, 2026
IBM Langflow OSS 1.0.0 through 1.12.2 could allow a remote attacker to execute arbitrary code due to an expected dependency confusion.
-
CVE-2026-93660
•
published on September 18, 2026
SQLBot through 1.10.1 fails to verify dashboard ownership in update_resource and update_canvas endpoints, allowing authenticated workspace members to modify other users' private dashboards. Attackers can supply arbitrary dashboard IDs to rename dashboards and overwrite component data, canvas styles, and view information belonging to other workspace members.
-
CVE-2026-93652
•
published on September 18, 2026
Integer overflow in µD3TN v0.15.0 TCPCLv3 handshake causes heap overflow, allowing remote attackers to reliably cause DoS
-
CVE-2026-93650
•
published on September 18, 2026
A vulnerability was determined in Saleor up to 3.20.118/3.21.54/3.22.47/3.23.14. This vulnerability affects the function get_client_ip of the file saleor/account/throttling.py. Executing a manipulation can lead to improper restriction of excessive authentication attempts. The attack can be executed remotely. The attack requires a high level of complexity. It is stated that the exploitability is difficult. The exploit has been publicly disclosed and may be utilized. The projects own issue #19203 internal ticket admits "IP can be spoofed in most deployments" and that its REAL_IP_ENVIRON-type setting bypasses get_client_ip; fix (right-to-left RFC 7239 hop selection) proposed but still unmerged. The vendor explains within an email, that "[t]his is not a vulnerability, this is working at intended, Saleor expects XFF to be configured properly".
-
CVE-2026-93647
•
published on September 25, 2026
An unauthenticated calendar sender can place active markup in a COUNTER message's RFC From address. Selecting the message in Zimbra Classic triggers stored XSS, allowing the attacker to access mailbox data and act as the victim.
-
CVE-2026-93641
•
published on September 25, 2026
An unauthenticated sender can forge a share notification that triggers stored XSS when a signed-in Zimbra Classic recipient clicks Accept Share, allowing the attacker to access mailbox data and act as the victim.
-
CVE-2026-93631
•
published on October 23, 2026
A cross-site request forgery vulnerability in the OAuth extension of Zimbra Collaboration Suite (ZCS) Network Edition allows an attacker to link an attacker-controlled external account to a victim's mailbox. The OAuth callback does not bind its state value or authorization code to the initiating Zimbra session and instead selects the destination mailbox from the browser's current authentication cookie. On a deployment with the provider configured, an attacker can induce a signed-in victim to load a callback containing a fresh code for the attacker's provider account. This creates a persistent data source that imports attacker-controlled contacts or events. With bidirectional CalDAV synchronization, appointments subsequently created or edited in the linked calendar are also disclosed to the attacker. ZCS 10.1.16 and 10.1.20 are affected.
-
CVE-2026-93622
•
published on September 23, 2026
Unauthenticated Cross Site Scripting (XSS) in WPS Limit Login = 1.5.9.3 versions.
-
CVE-2026-93616
•
published on September 22, 2026
A directory traversal and file upload vulnerability allows an unauthenticated attacker to upload and execute arbitrary scripts on Check Point Management Server.
-
CVE-2026-93606
•
published on September 18, 2026
vm2 (npm) versions 3.12.0 and earlier contain a sandbox escape in `VM` and `NodeVM`. When an embedder exposes a host API that returns a host-realm Promise, the bridge's rejection sanitizer (hostPromiseSanitizeReject / makeSanitizedPromiseCallback / normalizeHostPromiseCallbacks in lib/bridge.js) only wraps `then`/`catch` rejection slots that hold a function, and the sandbox-side `Symbol.species`/`.then` neutralization is installed only on the sandbox intrinsic `Promise.prototype`, so it never applies to a host Promise. Code running inside the sandbox can overwrite `p.constructor[Symbol.species]` on the host Promise and then call `p.then()` with no `onRejected` handler; V8 substitutes its internal Thrower, which re-throws the raw host rejection value into a resolve/reject closure captured by the attacker. This delivers an unsanitized, fully functional bridge proxy of the host object to sandboxed code, bypassing handleException and hostPromiseSanitizeReject. If the rejection value is host-pivotable (for example a host `process` object), this results in arbitrary code execution on the host. Fixed in 3.12.1.
-
CVE-2026-93604
•
published on September 18, 2026
vm2 through 3.12.0 exposes Node.js's crypto.setFips() function to untrusted guest code when an embedder explicitly allowlists the crypto builtin for a NodeVM (require.builtin: ['crypto']). The builtin sanitizer (sanitizeCryptoModule in lib/builtin.js) replaces crypto.setEngine but leaves crypto.setFips callable, and the readonly wrapper used to expose the host module does not localize side effects of forwarded host functions. Guest code can therefore call crypto.setFips() to change the FIPS mode of the entire host process; the modified mode is subsequently observed by trusted host code (crypto.getFips() changed from 0 to 1 in the reported test), crossing the NodeVM isolation boundary. Fixed in vm2 3.12.1.
-
CVE-2026-93599
•
published on September 18, 2026
rustls-webpki through 0.103.12 (and 0.104.0-alpha releases before 0.104.0-alpha.7) contains a reachable panic in bit_string_flags() in src/der.rs. The input guard fails to reject a named-bit BIT STRING whose content is exactly [0x00] (zero padding bits and no data bytes), so raw_bits.len() - 1 underflows on the empty slice and the subsequent index operation panics (subtract-with-overflow in debug, index-out-of-bounds in release). The condition is reachable through the public API BorrowedCertRevocationList::from_der() when a CRL contains an issuingDistributionPoint extension with such an onlySomeReasons value. Exploitation requires an application that explicitly opts in to CRL revocation checking by passing RevocationOptions to verify_for_usage() and that parses CRL bytes obtained from a source the attacker can influence; the default rustls configuration, which does not use RevocationOptions, is unaffected. A crafted CRL causes a denial of service via the panic. Fixed in 0.103.13 and 0.104.0-alpha.7.
-
CVE-2026-93591
•
published on September 18, 2026
SiYuan versions before 3.8.3 contain an SQL injection vulnerability in the graph.go query2Stmt function where tag values are concatenated raw into SQL string literals without escaping single quotes. A publish-mode reader or anonymous visitor can inject SQL via inline HTML span tags in the getGraph endpoint to execute arbitrary queries on the read-write database and exfiltrate private data across notebooks.
-
CVE-2026-93587
•
published on September 18, 2026
ImageMagick before 7.1.2-31 and before 6.9.13-56 contains a policy bypass in the PCD (and, per the upstream advisory, CUBE and HALD) coder: when a specific command line option is supplied, the decoder does not check a configured resource limit, which can result in extra memory allocation. A local user able to pass command line options to ImageMagick can therefore exceed the intended memory policy limit, causing a limited availability impact. The issue is fixed in 7.1.2-31 and 6.9.13-56.
-
CVE-2026-93586
•
published on September 18, 2026
ImageMagick before 7.1.2-31 and before 6.9.13-56 contains a use-after-free vulnerability in the ImagesToBlob method, caused by a pointer that is not updated correctly. Exploitation may result in a limited availability impact (e.g., a crash of the affected process). The issue is fixed in versions 7.1.2-31 and 6.9.13-56.
-
CVE-2026-93576
•
published on September 18, 2026
A flaw was found in Netty netty-codec-smtp. The component does not properly validate Carriage Return (CR) and Line Feed (LF) characters in the SMTP command-name field. A remote attacker, if an application routes untrusted input into this field, can embed CR/LF characters to inject arbitrary SMTP commands. This can lead to SMTP command smuggling, allowing for unauthorized email relay or spoofing of sender/recipient addresses. While the impact is significant, the real-world exploitability is considered lower as applications typically do not place user-controlled data in the command-name field.
-
CVE-2026-93574
•
published on September 18, 2026
A flaw was found in Netty's `netty-codec-http` component. A remote attacker could exploit this vulnerability by sending a specially crafted HTTP/1.1 chunk-size token that includes post-digit whitespace. This incorrect parsing of the chunk size can lead to HTTP request smuggling. This allows an attacker to bypass security controls or access unauthorized resources in proxy/backend deployments.