-
CVE-2026-94423
•
published on October 21, 2026
Net::LibSSH versions before 0.004 for Perl authenticate to an unverified server because connect never checks the host key against known_hosts.
connect reports success as soon as ssh_connect returns SSH_OK. libssh leaves the known-hosts check to the application, and this binding never makes it, so the strict_hostkeycheck and knownhosts options are set on the session and then decide nothing.
Password, agent and public-key authentication, channel and SFTP operations all run on a session whose peer was never identified, so an attacker who can redirect the connection receives the password when password authentication is used, and commands and data sent over the session.
-
CVE-2026-94419
•
published on September 27, 2026
Without NO_SESSION_CACHE_REF, wolfSSL_get_session() does not return a session object but a ClientSession reference of the form {row, index, hash(sessionID)} into the process-global SessionCache, and ClientSessionToSession() validates it against that hash alone. Because the TLS 1.2 session ID is chosen by the server and sent in clear, AddSessionToCache() matches any other server's session on the same ID and overwrites the client-side entry with that server's master secret, cipher suite and version, while the handle continues to resolve; nothing on the write path compares the peer, the application's server ID or the WOLFSSL_CTX. Resuming through the handle then produces an abbreviated handshake in which no Certificate message is sent, so neither chain verification nor wolfSSL_check_domain_name() runs, and the attacker is accepted as the original server for the whole of that connection. Affected builds are those leaving NO_SESSION_CACHE_REF, NO_SESSION_CACHE, NO_CLIENT_CACHE and TITAN_SESSION_CACHE all undefined, which includes a plain ./configure, --enable-opensslextra and --enable-opensslall; fifteen integration options define NO_SESSION_CACHE_REF and are therefore not affected, among them --enable-all, --enable-distro, --enable-curl, --enable-nginx, --enable-haproxy, --enable-stunnel, --enable-wpas and the rest of the OPENSSL_COMPATIBLE_DEFAULTS family, and --enable-leanpsk, --enable-leantls, --enable-lowresource and --enable-tinytls13 disable the cache outright. The application must use the legacy reference flow, wolfSSL_get_session() or SSL_get_session() followed by wolfSSL_set_session(); wolfSSL_get1_session() returns the session object itself and is not affected, nor are wolfSSL_SetServerID() lookups. Only TLS 1.2 and below and DTLS 1.2 and below are reachable, since TLS 1.3 and ticket resumption with an empty ServerHello session ID both use a client-chosen cache key. The poisoned entry lives in the process-global cache, so it crosses WOLFSSL_CTX boundaries and persists until the entry is evicted or the session times out, 500 seconds by default. Releases v5.3.0 through v5.9.2 are affected; the fix adds a per-write generation counter to the cache and raises WOLFSSL_CACHE_VERSION from 2 to 3, so a cache persisted by an older build is rejected by a fixed one.
-
CVE-2026-94418
•
published on September 27, 2026
Under WOLFSSL_SMALL_CERT_VERIFY, ProcessPeerCertParse() runs the certificate signature check separately from the parse to keep peak memory down, then merges the two results, but it merged the signature result back only when the parse returned 0, so any parse error hid it. ParseCertRelative() reaches its validity-date, name-constraint and critical-extension checks only after ConfirmSignature() has passed, so splitting the signature check out inverts the precedence that makes "override date errors" a sound policy, and ASN_SIG_CONFIRM_E is never surfaced anywhere. The attacker needs no key material from the real PKI and no CA compromise: a self-made certificate carrying the expected subject name, the trusted CA's subject as its issuer, arbitrary bytes where the signature goes, a validity window in the past and the attacker's own key pair is sufficient. Affected builds define WOLFSSL_SMALL_CERT_VERIFY, which is off by default, is not set implicitly by any platform or preset header, and is not reachable from any CMake option; the autotools routes are --enable-lowresource, --enable-leantls, --enable-tinytls13=cert and --enable-tinytls13=mutualauth, and examples/configs/user_settings_embedded.h reaches it through WC_CFG_SMALL_CERT_VERIFY, which ships as 0, while neither --enable-all nor --enable-distro enables it at all. The application must additionally install a verify callback through wolfSSL_CTX_set_verify() or wolfSSL_set_verify() with WOLFSSL_VERIFY_PEER that returns 1 for ASN_BEFORE_DATE_E or ASN_AFTER_DATE_E; wolfSSL ships this exact shape as myVerify() in wolfssl/test.h under VERIFY_OVERRIDE_DATE_ERR, which examples/client -D selects. An application with no callback, or whose callback returns preverify for date errors, still fails the handshake, and wolfSSL_CertManagerVerifyBuffer() and wc_CheckCertSignature() report ASN_SIG_CONFIRM_E correctly in the same binary. TLS 1.2 and TLS 1.3 are affected in both directions, and DTLS reaches the same function; where the forged certificate is a chain certificate the callback's consent causes it to be cached in the WOLFSSL_CTX certificate manager, so an exposed deployment must restart the context or the process rather than merely reconnect.
-
CVE-2026-94417
•
published on September 27, 2026
When an application enables both OCSP and CRL revocation checking on one WOLFSSL_CTX or certificate manager, wolfSSL skips the CRL check for any peer certificate that carries no Authority Information Access OCSP URL, and accepts a certificate the loaded CRL lists as revoked. The soft-fail policy for a missing responder collapses the OCSP result onto success before the code decides whether the CRL fallback is still needed, so "no responder exists" becomes indistinguishable from "the responder answered good". Affected builds define both HAVE_OCSP and HAVE_CRL: --enable-ocsp --enable-crl directly, and implicitly --enable-all, --enable-distro, --enable-curl, --enable-nginx, --enable-haproxy, --enable-stunnel, --enable-lighty, --enable-wpas, --enable-strongswan, --enable-mosquitto, --enable-jni, --enable-openvpn and --enable-krb. An application is affected only if it calls both wolfSSL_CTX_EnableOCSP() (or wolfSSL_EnableOCSP() / wolfSSL_CertManagerEnableOCSP()) and wolfSSL_CTX_EnableCRL() (or the equivalents) with a CRL loaded; an application that uses OCSP stapling alone through wolfSSL_CTX_EnableOCSPStapling() is not affected, because that sets up a separate OCSP instance. The defect sits in ProcessPeerCerts() and is reachable over TLS 1.0 through TLS 1.3 and DTLS, both on a client verifying a server certificate and on a server verifying a client certificate under mutual or post-handshake authentication. When the skipped check falls on a chain certificate rather than the leaf, the unchecked intermediate is promoted into the certificate manager and stays a trusted signer for every later connection on that context, so an affected long-running process needs its WOLFSSL_CTX torn down and not only its library replaced. All wolfSSL versions from 5.9.2 and earlier are affected; on versions 5.9.1 and 5.9.2 the WOLFSSL_OCSP_CHECKALL configuration fails closed with OCSP_NEED_URL, which leaves wolfSSL_CTX_EnableOCSP() without CHECKALL as the exposed configuration on 5.9.2.
-
CVE-2026-94397
•
published on September 26, 2026
Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead denial of service via Excessive Allocation (CAPEC-130)
-
CVE-2026-94388
•
published on October 16, 2026
Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in halfdata Green Popups halfdata-green-popups allows Blind SQL Injection.This issue affects Green Popups: from n/a before 7.6.3.
-
CVE-2026-94386
•
published on October 26, 2026
Use of Cache Containing Sensitive Information vulnerability in Apache Camel Oauth component.
This issue affects Apache Camel: from 4.19.0 before 4.22.2.
OAuthClientCredentialsTokenResolver obtains OAuth 2.0 bearer tokens through the client credentials grant on behalf of the components that authenticate their outbound calls with a named OAuth profile, such as camel-openai, camel-langchain4j-agent, camel-huggingface, camel-docling, camel-a2a, camel-spring-ai-chat and the IBM watsonx components, and of applications that call the OAuthClientAuthenticationFactory SPI directly. It kept the tokens it obtained in a static cache shared by every resolver instance and every CamelContext in the JVM, and keyed that cache on the token endpoint and the client ID only, although the token request also carries the client secret and the requested scope. Two profiles that share a token endpoint and a client ID but request different scopes, or authenticate with different client secrets, therefore mapped to the same cache entry: the profile that resolved a token first populated the entry, and the other profile was then handed that token, with no token request made under its own configuration, for as long as the token remained valid. Token caching is enabled by default, and pointing several profiles at one identity provider client is an ordinary use of the profile support rather than an opt-in to an insecure setting. The outcome is an outbound request that carries a token issued for another profile's scope, which can grant broader authority than the calling profile was configured for, or reach a service the token was not issued for; with identity providers that derive a token's audience from the requested scope, a different scope can mean a token for a different service altogether. A profile configured with a different client secret was likewise served the token obtained with the other secret, without authenticating with its own. The profiles are configured by the deployment, which is trusted, so no untrusted input reaches the cache: the party that gains is the service that receives a token it was not meant to receive, which, if hostile or compromised, can replay that token within its scope. Reaching the issue requires a deployment that defines more than one profile sharing a token endpoint and client ID while differing in scope or client secret.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. The 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, disable token caching on every OAuth profile that shares a token endpoint and client ID with another profile, by setting camel.oauth.NAME.cache-tokens=false for a named profile or camel.oauth.cache-tokens=false for the default one, so that each resolution requests a token with that profile’s own scope and client secret, at the cost of a token request on every resolution. Alternatively, register a separate client at the identity provider for each profile that needs a different scope or client secret, so that no two such profiles share a client ID.
-
CVE-2026-94384
•
published on September 22, 2026
Missing authorization in Amazon amazon-connect-salesforce-lambda before 5.26 allows any IAM principal with lambda:InvokeFunction permission on the affected function to escalate privileges and perform AWS API operations that their own IAM identity is explicitly denied, via invocation of a Lambda function that dispatches caller-supplied parameters to privileged service APIs without authorization validation.
To remediate this issue, we recommend upgrading to version 5.26 or later. After setup is complete, either delete or disable the sfExecuteAWSService function. If you retain the function, restrict invocation to the intended IAM user only.
-
CVE-2026-94383
•
published on September 21, 2026
The MISP blocklist workflow module accepted a user-supplied blocklist filename parameter without validating the file extension. The only sanitization applied was basename() to strip path components and a check for empty or dot values. A site administrator could specify a filename with an arbitrary extension that would be placed in the MISP export directory. If the underlying web server is configured to interpret and execute scripts from that directory, the resulting file could be invoked, leading to arbitrary code execution in the context of the web server process.
The vulnerability requires the attacker to hold site-administrator privileges within MISP, as the blocklist workflow module is restricted to that role. No additional user interaction is required beyond triggering the workflow action with a crafted filename parameter. The impact is full compromise of the MISP server's confidentiality, integrity, and availability, as arbitrary script execution grants the attacker the same privileges as the web server user.
Version affected: 2.5.47
-
CVE-2026-94379
•
published on September 21, 2026
The login() function in MISP's UsersController.php contained insufficient HTTP method validation for several security-critical code paths. The original code used an allowlist approach, checking only for specific HTTP methods (POST and PUT) before enforcing bruteforce protection, email one-time-password (OTP) verification, and login-failure logging. Because the checks were not exhaustive, an unauthenticated attacker could issue login requests using other HTTP methods and bypass all three security controls simultaneously. Specifically:
- the bruteforce blocklisting check and attempt counter were skipped, allowing unlimited credential-guessing attempts without being rate-limited or blocked
- the email OTP two-factor authentication step was skipped, defeating the second factor of authentication
- login-failure events were neither logged nor counted, removing the audit trail and the mechanism that would normally trigger a blocklist entry.
The security impact is the effective disabling of brute-force protection and multi-factor authentication for any attacker who can craft an HTTP request with a non-POST/PUT method to the login endpoint, potentially leading to credential compromise and unauthorized access to the MISP instance.
Version affected: 2.5.47
-
CVE-2026-94377
•
published on October 14, 2026
The Verified Reviews (Avis Vérifiés) plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'moderation' parameter in all versions up to, and including, 2.4.6 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The authentication bypass is possible because ntav_check_data() uses loose != comparisons for signature verification, allowing a JSON body with boolean true values for idWebsite and sign to pass all checks on any configured installation.
-
CVE-2026-94375
•
published on October 10, 2026
The Order Export & Order Import for WooCommerce plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.7.8 via the get_file_path. This makes it possible for unauthenticated attackers to extract download exported order CSV files containing customer PII — including names, billing and shipping addresses, email addresses, phone numbers, and order contents — directly over HTTP with no authentication. This is exploitable whenever the .htaccess and index.php guard files are absent from wp-content/webtoffee_export/, which can occur after any uninstall/reinstall cycle, migration, backup restore, or staging sync, since the export directory persists but its guard files do not; export filenames follow a fully deterministic second-precision timestamp pattern, making them brute-forceable across any suspected export window.
-
CVE-2026-94367
•
published on September 22, 2026
OpenEye Apex Network Video Recorder (NVR) firmware 3.2.9.376 contains an OS command injection vulnerability in recbackup. An authenticated administrator can supply crafted backup-area configuration input that is passed to a shell command, allowing commands to execute with the privileges of the nvr user. The underlying design has been present since at least firmware 2.2.3.4.
This vulnerability is resolved in OpenEye Apex version 3.4.3.
-
CVE-2026-94361
•
published on October 31, 2026
The Payable Payment Gateway for WooCommerce WordPress plugin before 1.3.1 does not verify the authenticity of an incoming payment notification before marking a WooCommerce order paid or failed, allowing unauthenticated attackers to change the payment status of any order in the store regardless of the payment method it was placed with.
-
CVE-2026-94360
•
published on October 14, 2026
The Paymentfor Gateway for WooCommerce WordPress plugin before 1.0.6 does not verify the authenticity of an inbound payment notification before marking an order as paid, allowing unauthenticated attackers to mark orders as paid without any payment being completed.
-
CVE-2026-94294
•
published on October 19, 2026
The App Builder WordPress plugin before 5.7.1 does not require authentication or authorisation before writing attacker-supplied data to one of its options and, on a separate unauthenticated request, redirecting the visitor's browser to a URI built from that stored data.
-
CVE-2026-94275
•
published on October 8, 2026
The Track Orders for WooCommerce WordPress plugin before 1.2.7 does not verify ownership of an order before returning its billing details, allowing unauthenticated attackers to obtain a customer's name, email address, phone number, postal address and order history by supplying that customer's email address.
-
CVE-2026-94271
•
published on October 6, 2026
The Deema Payment Gateway WordPress plugin through 1.1.2 does not verify the payment with the payment provider when handling the return from the hosted checkout, and does not check the payment status or amount, allowing unauthenticated users to have orders marked as paid without any payment being taken.
-
CVE-2026-94267
•
published on October 23, 2026
The Advanced Custom Fields: Extended WordPress plugin before 0.9.2.8, Advanced Custom Fields: Extended PRO WordPress plugin before 0.9.2.8 does not perform any capability check when updating a post through one of its front-end form actions, allowing unauthenticated visitors to overwrite arbitrary posts, including the ones in which the site stores its own field definitions, which in turn leads to arbitrary code execution on the server. Exploitation requires the site to publish a form whose post-update action maps both its target and its content to visitor-submitted values.
-
CVE-2026-94262
•
published on October 23, 2026
The Advanced Custom Fields: Extended WordPress plugin before 0.9.2.8, Advanced Custom Fields: Extended PRO WordPress plugin before 0.9.2.8 does not verify that the requester is authorised to edit the targeted user account in the update-user action of its front-end Forms module, performing that check only when the target account holds an administrator role, which allows unauthenticated visitors to overwrite any non-administrator account's credentials and obtain a session for that account. Exploitation requires the site to publish a form whose user-update action maps its target to a visitor-submitted value rather than to the default current user.