-
CVE-2026-93826
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
HID: hidpp: fix potential UAF in hidpp_connect_event()
If input_register_device() fails, we call input_free_device(), but keep
stale pointer to the old device in hidpp-input, which could potentially
lead to UAF. Fix that by resetting it to NULL before returning from
hidpp_connect_event().
-
CVE-2026-93822
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
PCI: iproc: Protect root bus removal with rescan lock
Hold the pci_rescan_remove_lock lock while stopping and removing a root bus
to avoid racing with concurrent rescan or hotplug operations triggered via
sysfs. Such races may lead to use-after-free issues or system crashes.
[bhelgaas: commit log]
-
CVE-2026-93815
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
net: au1000: move free_irq out of the close-time spinlocked section
au1000_close() calls free_irq() while aup-lock is still held with
spin_lock_irqsave(). free_irq() can sleep because it takes the IRQ
descriptor request mutex, so it does not belong inside the close-time
spinlocked section.
This was found by our static analysis tool and then confirmed by manual
review of the in-tree au1000_close() .ndo_stop path. The reviewed path
keeps aup->lock held across the MAC reset, queue stop and
free_irq(dev->irq, dev).
A directed runtime validation kept that ndo_stop carrier and the same
free_irq(dev->irq, dev) operation under the driver lock. Lockdep reported
"BUG: sleeping function called from invalid context" and "Invalid wait
context" while free_irq() was taking desc->request_mutex, with
au1000_close() and free_irq() on the stack.
Drop aup->lock before freeing the IRQ. The protected close-time work still
stops the device and queue before IRQ teardown, but the sleepable IRQ core
path now runs outside the spinlocked section.
-
CVE-2026-93813
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
btrfs: tree-checker: validate INODE_REF's namelen
[BUG]
A crafted btrfs image can trigger the following crash:
BUG: unable to handle page fault for address: ffffd1dc42884000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
CPU: 9 UID: 0 PID: 1034 Comm: poc Not tainted 7.1.0-rc4-custom+ #383 PREEMPT(full) 46af0a92938a63be7132e0dfd71e62327c51d5c2
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:memcpy+0xc/0x10
Call Trace:
TASK
read_extent_buffer+0xe4/0x100 [btrfs 3cf0785dd58fec8c5ff84633b772f17ce1f92a8f]
btrfs_get_name+0x15e/0x1e0 [btrfs 3cf0785dd58fec8c5ff84633b772f17ce1f92a8f]
reconnect_path+0x165/0x390
exportfs_decode_fh_raw+0x337/0x400
? drop_caches_sysctl_handler+0xb0/0xb0
---[ end trace 0000000000000000 ]---
RIP: 0010:memcpy+0xc/0x10
Kernel panic - not syncing: Fatal exception
[CAUSE]
TThe crafted image has the following corrupted INODE_REF item:
item 9 key (258 INODE_REF 257) itemoff 11544 itemsize 4106
index 2 namelen 4096 name: d\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000
The itemsize matches the namelen, but the namelen is 4096, way larger
than normal name length limit (BTRFS_NAME_LEN, 255).
Meanwhile the memory of the @name is only 255 byte sized, this will cause
out-of-boundary access, and cause the above crash.
[FIX]
Add extra namelen verification for INODE_REF, just like what we have
done in ROOT_REF checks.
Now the crafted image can be rejected gracefully:
BTRFS critical (device dm-2): corrupt leaf: root=5 block=30572544 slot=14 ino=259, invalid inode ref name length, has 4096 expect [1, 255]
BTRFS error (device dm-2): read time tree block corruption detected on logical 30572544 mirror 2
[ Rebase, add a Link: tag, add an simple cause analyze ]
-
CVE-2026-93812
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix sd_ndr.data memory leak in ksmbd_vfs_set_sd_xattr
ndr_encode_v4_ntacl() allocates sd_ndr.data via kzalloc() at entry.
If any subsequent ndr_write_*() call returns error during encoding,
the allocated sd_ndr.data won't be freed and causes memory leak.
Move kfree(sd_ndr.data) into out label to ensure the buffer gets
released on all success and error return paths.
-
CVE-2026-93806
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate assoc response length before status and IE access
cfg80211_rx_assoc_resp() initialises the status and response-IE fields
of cfg80211_connect_resp_params from the management frame before
proving that the frame is long enough for those offsets. S1G and
regular association responses also have different IE offsets, but the
S1G path only patched resp_ie after the unsafe initialiser had already
run.
Defer resp_ie, resp_ie_len, and status to after the link-iteration
loop. Use a bool to remember whether the frame is S1G, then validate
the appropriate minimum length and set all three fields in a single
if/else block. Funnel short-frame and SME-reject cleanup through a
shared free_bss label for the abandon paths.
-
CVE-2026-93795
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix leaks and online flag on radix_tree_insert failure
When radix_tree_insert() fails in blkg_create(), the error path has two
issues:
1. blkg-online is set to true unconditionally, even when the blkg was
never fully inserted. Move the assignment inside the success block.
2. The error path calls blkg_put() without first calling
percpu_ref_kill(). Because the refcount is still in percpu mode,
percpu_ref_put() only does this_cpu_sub() without checking for zero,
so blkg_release() is never triggered. This permanently leaks the
blkg memory, its percpu iostat, policy data, the parent blkg
reference, and the cgroup css reference — the latter preventing the
cgroup from ever being destroyed.
Fix by replacing blkg_put() with percpu_ref_kill(), matching the pattern
used in blkg_destroy().
-
CVE-2026-93794
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
smb/client: flush dirty data before punching a hole
Punching a hole after a large buffered write may leave the range
reported as data. Reproduce it with:
xfs_io -f \
-c "pwrite -b 3m -S 0x61 0 3m" \
-c "fpunch 1m 1m" \
-c "seek -h 0" \
-c "seek -d 1m" \
/mnt/test/repro
Punching 1 MiB at offset 1 MiB should produce:
0 1 MiB 2 MiB 3 MiB
| DATA | HOLE | DATA | EOF
Instead, the entire file is reported as data. SEEK_HOLE(0) returns EOF,
and SEEK_DATA(1M) returns 1M.
This happens because a dirty folio spanning the punched range can be
written back after the punch and refill the hole.
Fix this by flushing and waiting for dirty data in the punched range
before invalidating the page cache and issuing FSCTL_SET_ZERO_DATA.
The xfstests generic/539 pass against Samba/ksmbd with this change.
-
CVE-2026-93783
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: validate skb length in rfcomm_recv_frame
rfcomm_recv_frame() casts skb-data to struct rfcomm_hdr and dereferences
hdr->addr and hdr->ctrl without validating skb->len first. A truncated
frame with skb->len less than the minimum header size causes an
out-of-bounds read of uninitialized memory. Additionally, a zero-length
frame causes skb->len-- to underflow to UINT_MAX, making
skb_tail_pointer() read far past the buffer.
Commit 23882b828c3c ("Bluetooth: RFCOMM: validate skb length in MCC
handlers") fixed the same class of missing-length-check bugs in the MCC
sub-handlers, but the top-level rfcomm_recv_frame() was left unfixed.
KMSAN reports:
BUG: KMSAN: uninit-value in rfcomm_run
...
Uninit was created at:
__alloc_skb+0x474/0xb60
vhci_write+0xe9/0x870
Fix this by rejecting frames smaller than sizeof(struct rfcomm_hdr) + 1
(the minimum frame must have a 3-byte header and a 1-byte FCS).
-
CVE-2026-93779
•
published on November 7, 2026
The Tutor LMS – eLearning and online course solution plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 4.1.2 via the init_routes due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with subscriber-level access and above, to read paid course lesson and topic content without enrollment, retrieve quiz answer keys including the is_correct field before attempting a quiz, and enumerate the email addresses, usernames, and registration data of other users including instructors and administrators. Exploitation requires that the attacker hold a valid Tutor LMS API key/secret pair, which is issued to subscriber-level users through the plugin's API key management feature.
-
CVE-2026-93773
•
published on September 23, 2026
Contributor SQL Injection in Mollie Forms = 2.11.0 versions.
-
CVE-2026-93772
•
published on September 23, 2026
Subscriber Cross Site Scripting (XSS) in wpForo Forum = 3.1.5 versions.
-
CVE-2026-93771
•
published on September 30, 2026
Shop manager PHP Object Injection in Cost of Goods for WooCommerce = 3.5.2 versions.
-
CVE-2026-93765
•
published on September 18, 2026
Mongoid contains an unsafe reflection weakness in the document persistence layer of its object-document mapping code. Input whose keys are passed through from an unauthenticated party by an embedding application can cause unintended internal method invocation instead of the intended array field update. This may result in unintended removal of stored records and in the embedding application becoming unresponsive.
-
CVE-2026-93764
•
published on September 18, 2026
Mongoid may omit encryption rules for fields declared on embedded models when generating the client-side field-level encryption schema. Applications that enable this feature can therefore store values intended to be encrypted in readable form, with no error or warning. A party with routine read access to the database, a backup, or the underlying data files may then see data that was meant to remain unreadable outside the application.
-
CVE-2026-93759
•
published on September 18, 2026
Mongoid does not neutralize a string-typed query criterion supplied to its query builder, and instead passes it to the database as a server-side JavaScript expression. An unauthenticated party able to influence the value an application supplies as a query argument may cause code of their choosing to be evaluated by the database engine. This may result in unintended disclosure of stored field values, unintended selection of documents for application-initiated writes, and reduced database performance.
-
CVE-2026-93757
•
published on October 29, 2026
The Wild Apricot Login plugin for WordPress is vulnerable to Authentication Bypass via SSO Email-Collision Account Binding in all versions up to, and including, 1.0.18. When no WildApricot contact-ID mapping is found for an incoming SSO login, the plugin falls back to a network-global `get_user_by('email', ...)` lookup in `Module.php` to resolve a WordPress user, then `UserSynchronizer::syncWaContact()` binds and `Controller::login()` issues a session cookie via `wp_set_auth_cookie()` for that resolved user — both guarded only by `is_super_admin()` — without ever requiring proof of ownership of the matched WordPress account such as a password, local account-linking confirmation, inbox verification, or administrator approval. This makes it possible for attackers with custom-level WildApricot membership access to authenticate as an existing WordPress subsite administrator on a path-based Multisite network, obtaining a valid network-global authentication cookie for the victim without their credentials. Exploitation requires that the attacker control a WildApricot contact whose email address matches the target WordPress administrator's email — achievable via a public zero-fee membership application on the connected WildApricot organization — and that they complete the SSO flow on any subsite where Wild Apricot Login is active; because WordPress user identities and authentication cookies are network-global, the cookie issued on that subsite is equally valid on any other subsite where the victim user holds an administrator role.
-
CVE-2026-93750
•
published on September 18, 2026
http-cache-semantics through 4.2.0 contains a cache validation vulnerability in the _varyMatches() function that fails to properly validate Vary header wildcards due to byte-for-byte string comparison. Attackers can request URLs previously fetched by other clients to receive cached responses intended for different users, disclosing sensitive information across clients.
-
CVE-2026-93749
•
published on September 18, 2026
source-map-js through 1.2.1 fails to validate the per-section offset line value in indexed source maps, allowing attackers to specify arbitrary numeric values. Attackers can supply extremely large offset line values that cause synchronous event loop blocking for extended periods, preventing the service from handling other requests.
-
CVE-2026-93746
•
published on October 10, 2026
The WebToffee WooCommerce PDF Invoices, Packing Slips, Delivery Notes & Shipping Labels plugin for WordPress is vulnerable to Insecure Direct Object Reference in versions up to, and including, 5.0.2 via the 'email' parameter of the guest print_document_from_the_mail_link handler dispatched from print_window() on init. This is due to the handler authorizing access to an order's printable documents when the attacker-supplied (base64-encoded) 'email' equals the order's billing email — a non-secret identifier — instead of requiring the WooCommerce order_key. This makes it possible for unauthenticated attackers, when the site is configured to allow guest access to documents ('wt_pklist_print_button_access_for' != 'logged_in'), to retrieve any other customer's invoice, packing slip, delivery note, dispatch label or shipping label — including customer name, billing/shipping address, phone number, purchased products, prices, taxes and invoice metadata — by knowing the target order ID and the associated billing email address.