-
CVE-2026-93241
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
memcg: bypass the reclaim and oom killer for dying tasks once oom_reaper is done
At Meta, we are seeing instances where an OOM killed job is stuck in the
exit path for several hours. In one particular case, the job was stuck
for more than 8 hours and I had to manually remove the memory.max limits
to allow the process to exit.
The job was a single process job and had ~55 GiB memory.max and zswap
enabled. It had almost 0 anon in memory and ~111 GiB in zswap compressed
to ~51 GiB zswap pool (i.e. almost all of memory.current was zswap).
Nothing was left on the LRUs to reclaim.
On further inspection, I observed ~20k threads of that process stuck with
the following stack:
[0] mem_cgroup_out_of_memory+0x4e/0xa0
[<0>] charge_memcg+0x8bf/0x990
[<0>] mem_cgroup_swapin_charge_folio+0x4e/0x80
[<0>] __read_swap_cache_async+0x10c/0x260
[<0>] swapin_readahead+0x116/0x3f0
[<0>] do_swap_page+0x13c/0x1ce0
[<0>] handle_mm_fault+0x61d/0x11f0
[<0>] do_user_addr_fault+0x3e7/0x6d0
[<0>] exc_page_fault+0x8f/0x110
[<0>] asm_exc_page_fault+0x22/0x30
[<0>] __get_user_8+0x14/0x20
[<0>] futex_cleanup+0x27/0x1c0
[<0>] futex_exit_release+0x47/0x60
[<0>] do_exit+0x107/0x940
[<0>] do_group_exit+0x81/0xa0
[<0>] get_signal+0x2b1/0x6e0
[<0>] arch_do_signal_or_restart+0x1a/0x1c0
[<0>] exit_to_user_mode_loop+0xa8/0x1c0
[<0>] do_syscall_64+0x152/0x250
[<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53
In addition the dmesg was filled with "Out of memory and no killable
processes..." messages.
I have no idea why oom reaper was not able to reap/unmap the process. My
guess is that since oom reaper tries to acquire mmap_lock in read mode
limited number of times and then gives up, there might be a thread of that
process which had mmap_lock in write mode at that time.
My initial suspicion was the futex_cleanup and kernel page fault causing
infinite fault and charge retries but that was put to rest in previous
discussions happened on similar problem [1].
My current theory is that it is just a simple slow serialization behind
the oom_lock. Unlike page allocator, memcg charge code takes the oom_lock
without the "try". Though memcg oom code uses mutex_lock_killable(), note
that in the call stack get_signal() consumes SIGKILL (or
sigdelset(SIGKILL)) before calling do_group_exit(). So this
mutex_lock_killable() is just a mutex_lock() here. Therefore 10s of
thousands of threads are waiting on oom_lock and one by one they get
-EFAULT from get_user() in the futex cleanup code and bails out.
Discussion from [1] led to commit a75ffa26122b ("memcg, oom: do not bypass
oom killer for dying tasks") which routes dying tasks into the OOM path
precisely so the oom_reaper can reap their mm and free the memory
asynchronously. But the reaper is best-effort and one-shot: if it cannot
take mmap_lock for read (e.g. a sibling thread holds it for write) it
sets MMF_OOM_SKIP and never retries, leaving only the glacial
oom_lock-serialized synchronous drain.
Once MMF_OOM_SKIP is set there is no more asynchronous reclaim coming for
the mm, so a dying task charging against it has nothing left to wait for:
it frees its memory only once it finishes exiting. Running reclaim and
the (no-victim) OOM killer for it is then pointless, and doing it for 10s
of thousands of exiting threads is what serializes them behind oom_lock.
So before reclaim, if current is an OOM victim whose reaper is done, fail
the charge.
Reproduced with 20k threads, each parking a robust futex head on its own
zswapped page, OOM-group-killed while a sibling holds mmap_lock for write
so the reaper gives up and sets MMF_OOM_SKIP. Tested on next-20260728 and
baseline show ~90 seconds exit time while with the patch the exit time
reduced to ~3 seconds.
-
CVE-2026-93238
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: fix potential use of uninitialized apm_filtered bitmap
The DECLARE_BITMAP(apm_filtered, AP_DEVICES) macro allocates the bitmap
on the stack without zero-initializing it.
In vfio_ap_mdev_hot_plug_cfg(), the vfio_ap_mdev_filter_matrix() function
is only called to initialize and populate apm_filtered if either
filter_adapters or filter_domains is true. If the hot plug configuration
change only adds control domains (meaning filter_cdoms is true, but
filter_adapters and filter_domains are both false),
vfio_ap_mdev_filter_matrix() is bypassed.
Consequently, apm_filtered is passed to reset_queues_for_apids() with
uninitialized stack garbage. This can cause reset_queues_for_apids() to
interpret arbitrary stack garbage bits as valid APIDs to reset, potentially
performing unintended guest hardware queue resets.
Fix this by zero-initializing the apm_filtered bitmap at the beginning of
vfio_ap_mdev_hot_plug_cfg() using bitmap_zero().
-
CVE-2026-93233
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/dmem: fix callocated underflow on large folio split
nouveau_dmem_folio_free() drops chunk-callocated once per freed folio,
while a large (compound) device-private folio is only counted once when
it is allocated. When such a folio is split, the mm core invokes
->folio_split() (nouveau_dmem_folio_split()) once for each new
sub-folio, but the hook only fixes up the sub-folio metadata and leaves
chunk->callocated unchanged.
Each resulting sub-folio is later freed separately, so after a split
the single allocation (+1) is met by N frees (-N), leaving
chunk->callocated short by N-1. On the first split/free cycle it
underflows: WARN_ON(!chunk->callocated) fires, the unsigned counter
wraps and never returns to zero, so the chunk can no longer be
reclaimed (nouveau_dmem_fini() also warns on the leaked count).
Account for the new sub-folio in the split hook, under the same lock as
nouveau_dmem_folio_free(), so the count stays balanced.
-
CVE-2026-93225
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: fix typec switch leak on probe error path
If probe fails after imx95_usb_phy_get_tca() succeeds, the typec
switch leaks because the only cleanup path was in .remove(), which
never runs on probe failure.
Use devm_add_action_or_reset() so the switch is cleaned up on both
probe failure and driver removal. The imx95_usb_phy_put_tca() is no
longer needed, it will be removed in .remove() too.
-
CVE-2026-93224
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Fix unmatched rn_unregister on failed accept
When svc_rdma_accept() takes the errout path before
rpcrdma_rn_register() has succeeded, the existing cleanup block
calls rpcrdma_rn_unregister(dev, &newxprt-sc_rn) unconditionally.
svcxprt_rdma is kzalloc'd, so on that path sc_rn.rn_index is 0 and
sc_rn.rn_done is NULL; the unregister therefore xa_erase()s another
caller's slot 0 and performs an unmatched kref_put() on the
rpcrdma_device's rd_kref.
The same errout also brackets the cleanup with svc_xprt_get()/
svc_xprt_put() around the kref_init() birth reference. The kref
goes 1 -> 2 -> 1 and never reaches 0, so the svcxprt_rdma (and the
net/ns_tracker it pinned) is leaked on every failed accept.
rpcrdma_rn_register() writes rn->rn_done last, only after xa_alloc()
and kref_get() have both succeeded, so rn_done == NULL is a natural
"never registered" sentinel. Guard rpcrdma_rn_unregister() with an
early return when rn_done is NULL, and clear rn_done before the
matching xa_erase() so a repeated unregister is also a no-op.
With that guard in place, the accept errout drops the kref_init()
birth reference via svc_xprt_put(), which dispatches svc_rdma_free().
Teardown of sc_qp, sc_sq_cq, sc_rq_cq, and sc_pd runs under existing
IS_ERR/NULL guards in svc_rdma_free(); sc_rn is covered by the new
rn_done sentinel; sc_cm_id is non-NULL on every errout path because
svc_rdma_accept() dereferences it above the first goto errout.
svc_xprt_free() drops the module reference associated with the freed
transport, and svc_handle_xprt() drops its pre-acquired reference
when ->xpo_accept() returns NULL. Take a replacement module reference
before svc_xprt_put() so the two module_put()s remain balanced.
The rn_done guard also covers svc_rdma_free()'s non-listener call
to rpcrdma_rn_unregister() for transports whose register attempt
failed or never ran.
-
CVE-2026-93221
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
nfsd: convert nfsd_net boolean flags to unsigned long flags word
nfsd_net contains several boolean fields that are accessed from
concurrent contexts without serialization. In particular,
nfsd4_end_grace() guards its drain path with a plain bool:
if (nn-grace_ended)
return;
nn->grace_ended = true;
The read and the write are independent, and nothing in struct
nfsd_net serializes them. At least two contexts can reach this
code with no lock held:
laundromat path
laundry_wq kworker
nfs4_laundromat()
nfsd4_end_grace()
RECLAIM_COMPLETE path
nfsd compound kthread
nfsd4_reclaim_complete()
inc_reclaim_complete()
nfsd4_end_grace()
Both callers can observe grace_ended == false on different CPUs,
both store true, and both proceed into nfsd4_record_grace_done(),
which invokes the active client_tracking_ops->grace_done callback.
For tracking ops that drain reclaim_str_hashtbl (legacy_tracking_ops
via nfsd4_recdir_purge_old, and the cld v1+ ops via
nfsd4_cld_grace_done), grace_done calls nfs4_release_reclaim(),
which walks every bucket of reclaim_str_hashtbl with no lock and
calls nfs4_remove_reclaim_record() (list_del + kfree) on each
entry. Two concurrent walkers corrupt the list and double-free
every nfs4_client_reclaim. A concurrent nfsd4_find_reclaim_client()
iterating the same bucket reads through freed memory.
A third call site exists in nfs4_state_start_net() on the
skip_grace startup path, but it runs under nfsd_mutex before any
client has connected and before the laundromat's first delayed
work fires, so it cannot race with the two callers above.
Replace the scattered boolean fields in nfsd_net with a single
unsigned long flags word and an enum nfsd_net_flag for the bit
positions. The grace_ended race is fixed by using
test_and_set_bit(), which is atomic on all architectures. The
remaining flags (grace_end_forced, in_grace, somebody_reclaimed,
track_reclaim_completes, nfsd_net_up, lockd_up) are converted to
use test_bit/set_bit/clear_bit for consistency. This avoids
sub-word cmpxchg issues on architectures like Hexagon that only
support word-sized atomic operations.
-
CVE-2026-93218
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: skip device-private PMDs in madvise_free_huge_pmd
madvise_free_pte_range() checks pmd_trans_huge(*pmd) unlocked, then
madvise_free_huge_pmd() takes pmd_trans_huge_lock(). pmd_is_huge()
returns true for a device-private PMD, so orig_pmd can be device-private
and enter the !pmd_present() branch.
Skip device-private PMDs in that non-present branch and continue to out
before calling pmd_folio(). Downgrade the check to VM_WARN_ON_ONCE() so
an unexpected PMD softleaf logs a warning rather than panicking. Drop the
thp_migration_supported() guard: it expands to
IS_ENABLED(CONFIG_ARCH_SUPPORTS_PMD_SOFTLEAF), and both
pmd_is_migration_entry() and pmd_is_device_private_entry() already return
false when that config is not selected, so the guard suppresses only the
case where the warning would already be silent.
Potential trigger: an HMM-based GPU driver races with madvise(MADV_FREE):
migrate_vma_pages() flips the PMD to a device-private entry between the
caller's pmd_trans_huge() check and the callee's pmd_trans_huge_lock().
-
CVE-2026-93217
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
mm/madvise: skip device-private PMDs in cold and pageout walks
madvise_cold_or_pageout_pte_range() takes pmd_trans_huge_lock(), whose
pmd_is_huge() check returns true for a device-private PMD. The subsequent
!pmd_present() branch has a VM_BUG_ON() asserting migration is the only
allowed non-present case; a device-private PMD trips it.
Skip device-private PMDs in that non-present branch and continue to
huge_unlock before calling pmd_folio(). Downgrade the check to
VM_WARN_ON_ONCE() so an unexpected PMD softleaf logs a warning rather than
panicking. Drop the thp_migration_supported() guard: it expands to
IS_ENABLED(CONFIG_ARCH_SUPPORTS_PMD_SOFTLEAF), and both
pmd_is_migration_entry() and pmd_is_device_private_entry() already return
false when that config is not selected, so the guard suppresses only the
case where the warning would already be silent.
Potential trigger: an HMM-based GPU driver races with
madvise(MADV_COLD)/MADV_PAGEOUT: pmd_trans_huge(*pmd) reads true, then
migrate_vma_pages() flips the PMD to a device-private entry before the PMD
lock is acquired.
-
CVE-2026-93216
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
mm/page_owner: use memcg_data snapshot to avoid TOCTOU in print_page_owner_memcg()
print_page_owner_memcg() reads page-memcg_data via READ_ONCE() at the
start to guard against tail pages and NULL data. However, it later
re-reads page->memcg_data locklessly in two places:
1: page_memcg_check(page)
2: PageMemcgKmem(page) (via folio_memcg_kmem(), which includes
VM_BUG_ON assertions for tail pages and MEMCG_DATA_OBJEXTS)
If the page is concurrently freed and reallocated as a THP tail page or
slab page between these calls, the VM_BUG_ON assertions can trigger on
CONFIG_DEBUG_VM=y builds, crashing the kernel.
Fix both TOCTOU issues by using the memcg_data snapshot throughout.
-
CVE-2026-93214
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_tcm: fix deadlock in usbg_make_tpg()
usbg_make_tpg() held dep_lock while calling
configfs_depend_item_unlocked(), which acquires the configfs root
inode lock when operating across subsystems. This creates a circular
lock dependency with configfs_rmdir():
dep_lock - configfs root inode lock -> su_mutex -> dep_lock
In usbg_make_tpg(), dep_lock only serialized the read of opts->ready,
which is a monotonic flag that transitions from false to true exactly
once (in tcm_set_name()) and never reverts. Remove dep_lock from
usbg_make_tpg() entirely and use READ_ONCE/WRITE_ONCE to access
opts->ready locklessly instead.
-
CVE-2026-93213
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
of: fix out-of-bounds read in of_alias_scan() stem parser
The stem parser tests isdigit(*(end - 1)) before checking end start
and so reads one byte before the property name when the name is empty
or all digits. Check the bound first.
-
CVE-2026-93211
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
nfsd: initialize DRC hash table before registering shrinker
shrinker_register() precedes the INIT_LIST_HEAD loop and the
drc_hashsize store. On weakly-ordered architectures (arm64, ppc),
a shrinker scan can observe drc_hashsize before the bucket list
heads are initialized, causing a NULL deref in the DRC shrinker
callback.
Move bucket initialization and the drc_hashsize store before
shrinker_register() so the hash table is fully initialized before
it becomes visible to the shrinker.
-
CVE-2026-93208
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
kasan: fix cache shrink race with CPU hotplug
kasan_quarantine_remove_cache() first invokes per_cpu_remove_cache() on
all online CPUs. Each callback moves objects belonging to the cache from
cpu_quarantine to the CPU's shrink_qlist, where they can later be freed
from task context.
kmem_cache_destroy() invokes the quarantine removal path while holding
cpus_read_lock(), but kmem_cache_shrink() does not. The latter can
therefore race with CPU offlining as follows:
kmem_cache_shrink() CPU hotplug
------------------- -----------
on_each_cpu()
CPU1 moves objects to
CPU1's shrink_qlist
on_each_cpu() returns
CPU1 goes offline
kasan_cpu_offline()
drains cpu_quarantine
leaves shrink_qlist untouched
for_each_online_cpu()
skips CPU1
The objects left on CPU1's shrink_qlist are not returned to the slab
allocator. This may prevent kmem_cache_shrink() from releasing slabs that
would otherwise become empty. If CPU1 remains offline, a later
kmem_cache_destroy() also skips the list and can report that the cache
still contains objects.
An intermittent occurrence was observed with a virtio-9p filesystem. The
mount and umount commands both returned 0, but the kernel logged the
following during the userspace-triggered teardown:
[ 2994.380134][ T111] BUG 9p-fcall-cache-1 (Tainted: G B ): Objects remaining on __kmem_cache_shutdown()
[ 2994.381140][ T111] Object 0xff11000004361118 @offset=4376
[ 2994.381607][ T111] Allocated in p9_fcall_init+0x201/0x400 age=19564 cpu=1 pid=104
[ 2994.382591][ T111] p9_fcall_init+0x201/0x400
[ 2994.382810][ T111] p9_tag_alloc+0x12f/0x700
[ 2994.382982][ T111] p9_client_prepare_req+0x102/0x3e0
[ 2994.383165][ T111] p9_client_rpc+0x1ab/0xa50
[ 2994.383334][ T111] p9_client_getattr_dotl+0xb0/0x1a0
[ 2994.383515][ T111] v9fs_vfs_getattr_dotl+0x115/0x360
[ 2994.383719][ T111] vfs_getattr_nosec+0x22c/0x3a0
[ 2994.383910][ T111] vfs_statx+0xd7/0x170
[ 2994.384062][ T111] vfs_fstatat+0x45/0x80
[ 2994.384215][ T111] __do_sys_newfstatat+0x84/0xe0
[ 2994.384386][ T111] do_syscall_64+0x115/0x6a0
[ 2994.384566][ T111] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 2994.399720][ T111] WARNING: mm/slub.c:1244 at __kmem_cache_shutdown+0x363/0x500, CPU#0: busybox/111
[ 2994.405655][ T111] Call Trace:
[ 2994.406325][ T111] kmem_cache_destroy+0x73/0x1b0
[ 2994.406630][ T111] p9_client_destroy+0x271/0x3c0
[ 2994.407210][ T111] v9fs_session_close+0x3c/0x260
[ 2994.407409][ T111] v9fs_kill_super+0x48/0x90
[ 2994.407584][ T111] deactivate_locked_super+0xa3/0x160
[ 2994.407778][ T111] cleanup_mnt+0x1dd/0x3e0
Thus, a successful umount left objects in the 9p fcall cache and prevented
the cache from being destroyed cleanly.
Per-CPU shrink_qlist storage exists for every possible CPU, and each list
is protected by its own raw spinlock. Iterate over possible CPUs so that
a list populated before its CPU went offline is drained as well.
for_each_possible_cpu() can do more work than for_each_online_cpu(), but
this change only affects CONFIG_KASAN_GENERIC kernels. The extra work is
limited to cache shrink and cache destruction paths and does not affect
the normal allocation/free fast path. It adds one raw-spinlock-protected
scan of each possible CPU's shrink list. These lists are normally empty;
a non-empty list is traversed to remove objects belonging to the cache
being shrunk or destroyed.
-
CVE-2026-93205
•
published on September 24, 2026
In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-v3: Manage teardown with devm
arm_smmu_device_remove() manually frees the IOPF queue, destroys the
vmid_map and disables the device, while the IRQs and queues are devm
managed. devm unwinds only after remove() returns, so the cleanup runs
in the wrong order. The IOPF queue is freed before the event-queue IRQ
whose handler uses it.
Manage all of it with devm so the unwind order is correct. Free the IOPF
queue and vmid_map via devm actions, and disable the device from one
registered after arm_smmu_device_reset().
This is also a prerequisite for fixing a Tegra241 CMDQV CMD_SYNC
use-after-free in the subsequent patch.
-
CVE-2026-93201
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: validate seg_id fields from persistent memory
cache_pos_decode(), cache_key_decode() and the last-kset branches of
cache_replay(), the writeback worker and the GC worker take a cache
segment id from the cache device metadata and index cache-segments[]
with it without checking it against cache->n_segs. That metadata is only
CRC-protected with a fixed public seed, so whoever supplies the cache
device on a table load (CAP_SYS_ADMIN) controls the id; an out-of-range
value forms a wild pcache_cache_segment pointer that is dereferenced and
written through -- an out-of-bounds read and write driven by on-disk data.
Add cache_seg_id_valid() and reject an out-of-range id at each decode
site, failing the operation with -EIO instead of indexing past the array.
Bound the id against the initialized-segment count (cache_info.n_segs)
rather than the physical device total. A forged cache_info.n_segs below
seg_num otherwise leaves segments[cache_info.n_segs..seg_num) as zeroed
structs whose data pointer is NULL, so a forged id in that window would
still be dereferenced. A later patch guarantees cache_info.n_segs =
seg_num, and a driver-created cache sets the two equal, so valid images
are unaffected.
-
CVE-2026-93195
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: synopsys: dw-dp: Support unregistering the AUX channel
The DisplayPort AUX channel gets initialized and registered during
dw_dp_bind(), but it is never unregistered, which may lead to resource
leaks and/or use-after-free.
Add the missing dw_dp_unbind() function to allow the users of the
library to handle the required cleanup, i.e. unregister the AUX adapter.
-
CVE-2026-93191
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
smack: fix incorrect task context in smack_msg_queue_msgrcv
The smack_msg_queue_msgrcv() function incorrectly checks
the permissions of the 'current' task instead of the
'target' task.
In the msgsnd() syscall path, if a receiver is already waiting,
the pipelined_send() optimization is used to push the message
directly to the receiver task:
ipc/msg.c`pipelined_send():
` smp_store_release(&msr-r_msg, msg)
In this case, the 'sender' (current) task performs the check
on behalf of the 'receiver' task (msr->r_tsk, passed as the
'target' parameter):
ipc/msg.c`pipelined_send():
` security_msg_queue_msgrcv(,, target := msr->r_tsk,,)
However, smack_msg_queue_msgrcv() ignores the 'target' and
checks 'current':
smack_msg_queue_msgrcv(…)
` smk_curacc_msq(isp, MAY_READWRITE); // current task
'current' MAY satisfy smack_msg_queue_msgrcv r/w requirement,
but 'target' (the receiver task) might NOT;
as a result, an unauthorized receiver gets the message,
violating MAC policy.
Test:
1) create a sysv message queue with label “foo”
2) echo "bar foo r" >/smack/load2
3) msgrcv(,,,0,MSG_NOERROR) in "bar"-labeled task.
The task is waiting for the messages ...
4) msgsnd() from a "foo"-labeled task:
"bar"-labeled task gets the message.
This patch fixes the issue by checking permission on the
'target' task instead of 'current'.
(2008-02-04, Casey Schaufler)
-
CVE-2026-93186
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
cxl/mbox: Clamp mailbox output allocation to the payload size
CXL_MEM_SEND_COMMAND bounds the user's in.size to the mailbox payload
size but leaves out.size unbounded, then cxl_mbox_cmd_ctor() calls
kvzalloc(out.size). A large out.size drives a huge allocation, above
INT_MAX it WARNs and taints, and with panic_on_warn=1 it panics.
The transport __cxl_pci_mbox_send_cmd() already clamps the response copy
to min(out.size, payload_size, device len), so the output buffer is
never written beyond payload_size. Clamp the allocation to payload_size
too, matching the RAW path.
-
CVE-2026-93185
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
ASoC: rt700-sdw: always drain jack work on remove
rt700_sdw_remove() drains jack_detect_work and jack_btn_check_work only
when rt700-hw_init is true. That state bit is cleared by
rt700_update_status() when the SoundWire slave becomes UNATTACHED, but a
jack work item can already have been queued by rt700_interrupt_callback()
or rt700_jack_init() while the device was initialized.
Do not use hw_init as the remove-time guard for draining these work
objects. The delayed works are initialized during rt700_init(), so remove
can cancel them unconditionally and pair the object lifetime with the
codec-private data lifetime instead of a mutable hardware state bit.
This issue was found by our static analysis tool and then confirmed by
manual review of the SoundWire status, interrupt and remove paths. The
remove path should drain work based on whether the work object exists, not
on a runtime hardware state bit that can change after the work was queued.
A QEMU PoC queued jack_detect_work, simulated SDW_SLAVE_UNATTACHED, and
then entered remove. DEBUG_OBJECTS reported an active timer/work object
associated with the rt700 jack work path after remove skipped the cancel.
This is sent as an RFC because the practical trigger depends on SoundWire
core remove ordering after an UNATTACHED status update. If remove cannot
run after hw_init has been cleared while jack work is still pending, this
is a defensive lifecycle cleanup rather than a reachable race on current
systems.
-
CVE-2026-93176
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dangling pointer in plane reset function
amdgpu_dm_plane_drm_plane_reset() frees the old state before allocating
a new one. If kzalloc() fails, the function returns without updating
the state pointer, leaving a dangling pointer to already freed memory.
Fix this by allocating the new state first. On allocation failure, the
old state remains untouched and the function safely returns.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[adjust for movement around current amd-staging-drm-next]