-
CVE-2026-93147
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
s390/bpf: Replace ly instruction with llgf
cpu_nr is a 32 bit value and BPF_REG_0 is a 64 bit register, when ly loads
the cpu_nr into BPF_REG_0 it does not zero the upper bits, but llgf does.
-
CVE-2026-93146
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
time/namespace: Validate nanosecond field in proc_timens_set_offset()
The function validates tv_sec to be within [-KTIME_SEC_MAX, KTIME_SEC_MAX]
but never validates that tv_nsec is within the valid range of
[0, NSEC_PER_SEC-1] before using it in timespec64_add().
timespec64_add() expects both timespec64 structures to have normalized
values with tv_nsec in the range [0, 999999999]. If off-val.tv_nsec
contains invalid values (negative or >= NSEC_PER_SEC), it could lead to
incorrect calculations or unexpected behavior.
Add validation to ensure tv_nsec is within the valid range before
performing the addition.
-
CVE-2026-93142
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
thermal/drivers/rcar: Fix error checking in probe()
This code accidentally calls thermal_zone_device_enable() before checking
whether thermal_zone_device_register_with_trips() failed. Move the call
until later to avoid an error pointer dereference of "priv-zone".
The driver works differently depending on if we are using OF thermal or
not. We use thermal_add_hwmon_sysfs() if we are using OF thermal and
call thermal_zone_device_enable() if not. We can share same error check
for if either of these fail.
Moving the thermal_zone_device_enable() call is a bit cleaner as well.
The original code used a three step process to cleanup:
1. Call thermal_zone_device_unregister() to cleanup.
2. Set priv->zone to an error pointer to preserve the error code.
3. Set priv->zone to NULL to avoid a second call to
thermal_zone_device_unregister() in the rcar_thermal_remove()
function.
Now we can just do a direct goto error_unregister and rcar_thermal_remove()
handles the cleanup properly.
-
CVE-2026-93138
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix vmlinux BTF prep race in bpf_get_btf_vmlinux
bpf_get_btf_vmlinux() lazily parses the vmlinux BTF under the
bpf_verifier_lock, but publishes the result through a plain store
and re-checks it through a plain lockless load. Nothing orders
the stores initializing the struct btf inside btf_parse_vmlinux()
against the store publishing the pointer: On a weakly ordered
arch, a concurrent first-time caller taking the lockless fast
path could in principle observe the pointer before the parsed
contents are visible. The mutex_unlock() does not help such a
reader given it only synchronizes with a later acquisition of the
same lock. Thus, publish the pointer with smp_store_release()
and read it on the fast path with smp_load_acquire().
Acquire semantics are needed rather than a dependency-ordered
READ_ONCE(): btf_parse_vmlinux() also populates globals outside
the returned object (e.g. bpf_ctx_convert.t). An address
dependency would only order accesses performed through the
pointer and not cover other globals.
-
CVE-2026-93136
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: ep: Fix device refcount leak in the error path of MHI device creation
mhi_ep_create_device() takes one device reference for the UL channel and
another for the DL channel after allocating the transfer device. These
references are normally released by mhi_ep_destroy_device() before the
device itself is removed.
If dev_set_name() or device_add() fails, the error path currently drops
only one reference. The remaining channel references keep the device
from being released and leave the channels associated with a device that
was never registered.
Route both failures through a common unwind path that drops the DL
channel reference, the UL channel reference, and the initial reference
from device_initialize().
-
CVE-2026-93132
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
ACPI: RISC-V: Fix riscv_acpi_add_prt_dep() loop handling
The loop in riscv_acpi_add_prt_dep() includes error conditions that are
handled in a dubious - if not outright wrong - way, by continuining the
loop (which skips and misses the entry pointer update to point to the next
entry).
Rewrite the loop as a for loop (that handles the continuation correctly)
and wrap the condition and update statements using helper functions to make
it cleaner.
-
CVE-2026-93130
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-base: Fix resource leak on module load failure
We need to properly clean up the SMBIOS request and the privacy driver
when the module load fails.
-
CVE-2026-93129
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-base: Fix handling of ultra performance key
The commit message of commit 5fbd827eb9c2 ("platform/x86: dell-wmi: Recognise or support new switches")
states that the ultra performance key contains additional data
after the type and code fields. The event data passed to
dell_wmi_process_key() is already parsed, so "buffer" already
starts after those two fields.
Use the correct index for accessing the first data field to avoid
a potential buffer overread.
-
CVE-2026-93128
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: lg-laptop: Fix LED resource handling
The event notification callback might access kbd_backlight even
when it was not successfully registered with the LED subsystem.
The same happens inside acpi_remove(), where the LED devices are
unregistered unconditionally.
Fix this by tracking the availability of the kbd_backlight LED
device and use devm_led_classdev_register() to let devres take
care of unregistering the LED devices during removal. For this
the parent device of the LED devices is changed to the native
platform device.
-
CVE-2026-93127
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop scalar id on sign-extending narrowing stack fills
When a spilled scalar is filled back with a sign-extending narrowing load
(BPF_MEMSX), check_stack_read_fixed_off() copies the spilled register
including its scalar id, but coerce_reg_to_size_sx() then sign-extends the
filled register's value. If the same slot is also filled with a plain
zero-extending load (BPF_MEM), both destination registers share the id yet
hold different values. A later 'if zext-reg == const' then refines the
sign-extended register through sync_linked_regs() to a value it does not
have at runtime (e.g. the verifier believes 0x80000000 while the register
is 0xffffffff80000000), which can be turned into an out-of-bounds access.
Drop the shared scalar id at the sign-extension site in check_mem_access()
when sign extension actually changes the value, mirroring the BPF_MOVSX
handling in check_alu_op() (no_sext = reg_umax < 2^(size*8-1)).
-
CVE-2026-93125
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max
check_kfunc_args() detects a kfunc argument named rdonly_buf_size or
rdwr_buf_size and stores reg-var_off.value into meta->r0_size, a u64,
and does not bound it. check_kfunc_call() later copies that value into
the returned register's mem_size field:
meta->r0_size = reg->var_off.value;
...
regs[BPF_REG_0].mem_size = meta.r0_size;
regs[BPF_REG_0].mem_size is u32. A constant whose upper 32 bits are set
gets truncated instead of causing a load-time rejection, so the verifier
records a PTR_TO_MEM register with an approximately 4 GiB mem_size for
whatever allocation the kfunc returned. A later access check against
that register uses the truncated, wrong bound.
Reject rdonly_buf_size/rdwr_buf_size values that exceed U32_MAX at the
point meta->r0_size is set.
-
CVE-2026-93119
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
usb: ljca: bound bank_num in ljca_enumerate_gpio()
ljca_enumerate_gpio() reads desc-bank_num from the device and loops
valid_pin[i] = get_unaligned_le32(...) for i bank_num. valid_pin[]
holds only LJCA_MAX_GPIO_NUM / 32 = 2 entries.
Two checks run before the loop. The reply length must match
struct_size(desc, bank_desc, bank_num). The product
pins_per_bank * bank_num must not exceed LJCA_MAX_GPIO_NUM. Neither one
bounds bank_num against the size of valid_pin[]. The reply is capped at
LJCA_MAX_PAYLOAD_SIZE (60) bytes, so the struct_size check limits
bank_num to 9. A device that reports bank_num 9 with pins_per_bank 7
still passes both checks. gpio_num is 63 and the reply is 56 bytes. The
loop then writes nine u32 into the two entry array and overruns
valid_pin[] on the stack.
A broken or malicious LJCA device can therefore overflow the stack.
Reject a bank_num that does not fit valid_pin[].
-
CVE-2026-93117
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
usb: fix UAF when probe runs concurrent to dyn ID removal
Dynamic IDs are only guaranteed to be valid when usb_dynids_lock is held,
as remove_id_store can free the node. Thus, make a copy in
usb_probe_interface. Clarify the documentation that the id parameter is
only valid during the probe.
USB serial has the same pattern, but it does not need fixing as the IDs
cannot be removed via sysfs.
-
CVE-2026-93115
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
platform/mellanox: mlxbf-pmc: Check ACPI_COMPANION() against NULL
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
mlxbf_pmc_probe() passes the result of ACPI_COMPANION() to
acpi_device_hid(), which dereferences it, so force-binding the driver to
a device without an ACPI companion leads to a NULL pointer dereference.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
mlxbf-pmc driver and return -ENODEV when the companion is missing.
-
CVE-2026-93101
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-async: Unregister sub-device if asc_list is empty
When my em28xx USB device that uses the i2c tvp5150 driver is
disconnected, it crashes.
The cause is that the tvp5150 i2c module uses v4l2_async, but
the em28xx driver does not since it predates v4l2_async.
In that corner case sd-asc_list is empty, so
v4l2_async_unregister_subdev() never calls v4l2_device_unregister_subdev().
Modify the code so that, if sd->asc_list is empty,
v4l2_device_unregister_subdev() is still called.
-
CVE-2026-93100
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Prevent use-after-free in rdtgroup_kn_put()
A struct rdtgroup is reference counted via rdtgroup::waitcount. Callers that
need the structure to remain valid across a sleep (while waiting on acquiring
rdtgroup_mutex) take a reference with rdtgroup_kn_get() and release it with
rdtgroup_kn_put().
The release path is intended to serve as the fallback freer: if the count
drops to zero and the group has already been marked RDT_DELETED,
rdtgroup_kn_put() frees the structure.
The bulk teardown paths free_all_child_rdtgrp() and rmdir_all_sub() resulting
from a resctrl directory remove or resctrl fs unmount act as the primary
freer: they hold rdtgroup_mutex and free each rdtgroup whose waitcount is
zero, otherwise they set RDT_DELETED and leave the freeing to the last waiter.
These two freers race. rdtgroup_kn_put() commits waitcount == 0 with
atomic_dec_and_test() outside rdtgroup_mutex, then reads rdtgroup::flags.
Between those two operations a concurrent caller of free_all_child_rdtgrp()
or rmdir_all_sub() (which holds the mutex) can observe waitcount == 0 via
atomic_read(), call rdtgroup_remove(), and kfree() the structure.
The subsequent read of rdtgroup::flags in rdtgroup_kn_put() is then
a use-after-free, and the structure may even be freed twice if the freed
memory happens to satisfy the RDT_DELETED flag check.
Replace the bare atomic_dec_and_test() with atomic_dec_and_mutex_lock() so
that the decrement-to-zero takes rdtgroup_mutex before the count becomes
globally visible. The inspection of rdtgroup::flags then runs under the same
mutex held by the bulk freers, making the two paths mutually exclusive.
The common case where the count does not reach zero remains lock-free. Defer
kernfs_unbreak_active_protection() until after the mutex is dropped since
kernfs active protections functionally wrap rdtgroup_mutex. Remove resource
group, which in turn drops its kernfs reference, after kernfs protection is
restored.
[ bp: Split the commit messsages into smaller, easier-parseable paragraphs. ]
-
CVE-2026-93099
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix UAF from worker threads when domains are removed
The mbm_handle_overflow() and cqm_handle_limbo() workers read event counters
and may sleep while doing so. They are scheduled via delayed_work embedded in
struct rdt_l3_mon_domain. Architecture allocates and frees these domains from
CPU hotplug callbacks under cpus_write_lock(), and the workers acquire
cpus_read_lock() to keep the domain alive across their access.
A use-after-free can occur when a worker is blocked waiting for
cpus_read_lock() while the hotplug core holds cpus_write_lock(): the
architecture frees the rdt_l3_mon_domain that contains the worker's
work_struct. When the worker unblocks, the container_of() it performs on the
embedded work pointer dereferences freed memory.
Drop cpus_read_lock() from the workers and instead drain pending and in-flight
work synchronously before the architecture can free the domain. Since
architecture offlines the domain under cpus_write_lock() after it has been
unlinked from the RCU list and a grace period has elapsed, no new work can be
scheduled. The cancel only needs to wait out existing work. Drop
rdtgroup_mutex during CPU offline around cancel_delayed_work_sync() so that
a worker waiting on the mutex can complete before re-pinning the work on
a different CPU.
When offlining a CPU the architecture may iterate over resources in any order.
For example, the MBA control domain may be offlined before or after
a corresponding L3 monitor domain. Ensure that resctrl fs cancels the workers
no matter what order the architecture offlines the domains.
-
CVE-2026-93098
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
rpmsg: glink: fix deadlock in endpoint destroy during driver detach
During driver detach, the device core holds the device mutex throughout
the driver's remove callback chain. When the rpmsg endpoint is
destroyed as part of that teardown, the GLINK endpoint destroy
implementation attempts to unregister the underlying rpmsg device.
That unregistration calls device_del(), which tries to re-acquire the
same device mutex already held higher up the stack, causing rmmod to
hang indefinitely.
The deadlock manifests with the following call chain:
[0] device_del+0x44/0x414 <- tries to acquire same mutex
[<0>] device_unregister+0x18/0x34
[<0>] rpmsg_unregister_device+0x28/0x4c
[<0>] qcom_glink_remove_rpmsg_device+0x70/0xc0
[<0>] qcom_glink_destroy_ept+0x58/0xbc
[<0>] rpmsg_dev_remove+0x50/0x60
[<0>] device_remove+0x4c/0x80
[<0>] device_release_driver_internal+0x1cc/0x228 <- acquires device mutex
[<0>] driver_detach+0x4c/0x98
[<0>] bus_remove_driver+0x6c/0xbc
[<0>] driver_unregister+0x30/0x60
[<0>] unregister_rpmsg_driver+0x10/0x1c
[<0>] fastrpc_exit+0x28/0x38 [fastrpc]
[<0>] __arm64_sys_delete_module+0x1b8/0x294
[<0>] invoke_syscall+0x48/0x10c
[<0>] el0_svc_common.constprop.0+0xc0/0xe0
[<0>] do_el0_svc+0x1c/0x28
[<0>] el0_svc+0x34/0x108
[<0>] el0t_64_sync_handler+0xa0/0xe4
[<0>] el0t_64_sync+0x198/0x19c
The rpmsg device unregistration inside endpoint destroy is redundant.
In both contexts where endpoint destruction is triggered:
- Driver detach path: the driver core already tears down the rpmsg
device.
- Channel close path: the rpmsg device is already unregistered before
endpoint destruction is reached.
Remove the redundant unregistration to fix the deadlock.
-
CVE-2026-93096
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Serialize multi-part Get/Set Feature transfers
A Get or Set Feature payload larger than the mailbox payload size is
split into several mailbox commands. mbox_mutex only serializes
individual mailbox commands and is dropped between iterations of these
loops. Nothing serializes the multi-part transfer as a whole.
cxl_get_feature() and cxl_set_feature() are reachable concurrently
from fwctl (per-fd RPCs run under a read-held registration lock) and
from the EDAC scrub/ECS/repair paths, so two transfers to the same
mailbox can interleave their parts and corrupt the device's transfer
context.
Add a per-mailbox feat_mutex and hold it across the whole transfer in
both functions. It nests outside mbox_mutex (which is taken inside
cxl_internal_send_cmd()), and is taken nowhere else, so no lock-ordering
inversion is introduced.
-
CVE-2026-93095
•
published on September 17, 2026
In the Linux kernel, the following vulnerability has been resolved:
hfsplus: validate thread record before delete key rebuild
hfsplus_delete_cat() is called with str == NULL when the last open
reference to an unlinked HFS+ hardlink backing inode is closed. In that
case, the function finds the catalog thread by CNID and rebuilds the
catalog key from thread.nodeName.
That reconstruction path reads thread.nodeName.length directly from the
catalog B-tree into fd.search_key and then copies length * 2 bytes into
fd.search_key-cat.name.unicode. It does not first check that the found
record is a thread record or that its size matches the thread name.
A corrupted image can therefore provide an oversized thread name length
and make hfs_bnode_read() write past the catalog search-key allocation.
Read the CNID record through hfsplus_brec_read_cat(), which bounds the
record read to sizeof(hfsplus_cat_entry) and verifies that a thread
record's size exactly matches nodeName.length. Together, these checks
ensure an accepted thread name fits HFSPLUS_MAX_STRLEN. Reject non-thread
records before building the delete key from the validated thread name.
Share the thread-record-type helper between hfsplus_find_cat() and
hfsplus_delete_cat().